[PATCH v3 3/6] env: Enable SPI flash env for SiFive FU540

[Bin Meng]

On Mon, Jun 22, 2020 at 9:55 PM Bin Meng <bmeng.cn at gmail.com> wrote:
>
> On Fri, Jun 5, 2020 at 4:41 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
> >
> > SPI flash device on HiFive Unleashed has 32MiB Size.
> >
> > This patch add SPI flash environment after U-Boot proper

Forgot to mention a nit:

add -> adds

> > partition with a size of 128KiB.
> >
> > SPI flash partition layout(32MiB):
> >     0 - 34      : reserved for GPT header
> >    35 - 39      : unused
> >    40 - 2087    : loader1 (SPL, FSBL)
> >  2088 - 10279   : loader2 (U-Boot proper, U-Boot)
> > 10280 - 10535   : environment
> > 10536 - 65494   : rootfs
> > 65528 - 65536   : distro script
> >
> > Note: the loader1 must start from 40th sector even though
> > there are 6 free sectors prior since 40th sector is nearest
> > flash sector boundary.
> >
> > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> > ---
> > Changes for v3:
> > - fixed build issues
> >
> >  arch/riscv/cpu/fu540/Kconfig | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> >
>
> Reviewed-by: Bin Meng <bin.meng at windriver.com>
> Tested-by: Bin Meng <bin.meng at windriver.com>