[PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression

[Fabio Estevam]

Hi Tom,

On Thu, Jun 25, 2020 at 10:52 AM Soeren Moch <smoch at web.de> wrote:
>
> On 25.06.20 13:14, Fabio Estevam wrote:
> > Since commit:
> >
> > commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc
> > Author: Michael Walle <michael at walle.cc>
> > Date:   Thu May 7 00:11:58 2020 +0200
> >
> >     phy: atheros: ar8035: remove static clock config
> >
> >     We can configure the clock output in the device tree. Disable the
> >     hardcoded one in here. This is highly board-specific and should have
> >     never been enabled in the PHY driver.
> >
> >     If bisecting shows that this commit breaks your board it probably
> >     depends on the clock output of your Atheros AR8035 PHY. Please have a
> >     look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
> >     "clk-out-frequency = <125000000>" because that value was the hardcoded
> >     value until this commit.
> >
> >     Signed-off-by: Michael Walle <michael at walle.cc>
> >     Acked-by: Joe Hershberger <joe.hershberger at ni.com>
> >
> > , the clock output setting for the AR803x driver is removed from being
> > hardcoded in the PHY driver and should be passed via device tree instead.
> >
> > Update the device tree with the "qca,clk-out-frequency" property so that
> > Ethernet can work again.
> >
> > Reported-by: Soeren Moch <smoch at web.de>
> > Signed-off-by: Fabio Estevam <festevam at gmail.com>
> Tested-by: Soeren Moch <smoch at web.de>

My understanding is that Stefano does not have any other pull requests
for 2020.07.

In this case, could you apply this regression fix directly?

Thanks