[PATCH v3 06/15] board: ns3: default reset type to L3

[Simon Glass]

Hi Rayagonda,

On Wed, 10 Jun 2020 at 04:42, Rayagonda Kokatanur
<rayagonda.kokatanur at broadcom.com> wrote:
>
> Default "reset" from u-boot to L3 reset.

U-Boot

> "reset" command with argument will trigger L1 reset.
>
> Signed-off-by: Rajesh Ravi <rajesh.ravi at broadcom.com>
> Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty at broadcom.com>
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
> ---
>  board/broadcom/bcmns3/ns3.c | 20 ++++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c
> index 5e644bd466..1221f26ddc 100644
> --- a/board/broadcom/bcmns3/ns3.c
> +++ b/board/broadcom/bcmns3/ns3.c
> @@ -68,7 +68,23 @@ int dram_init_banksize(void)
>         return 0;
>  }
>
> -void reset_cpu(ulong addr)
> +void reset_cpu(ulong level)
>  {

This should be in a sysreset driver. It supports different reset types.

> -       psci_system_reset();
> +#define L3_RESET 30
> +       u32 reset_level, strap_val;
> +
> +       /* Default reset type is L3 reset */
> +       if (!level) {
> +               /*
> +                * Encoding: u-boot reset command expects decimal argument
> +                * strap val = 1st decimal digit;reset level = 2nd decimal digit
> +                */
> +               strap_val = L3_RESET % 10;
> +               level = L3_RESET / 10;
> +               reset_level = level % 10;
> +               psci_system_reset2(reset_level, strap_val);
> +       } else {
> +               /* U-boot cmd "reset" with any arg will trigger L1 reset */
> +               psci_system_reset();
> +       }
>  }
> --
> 2.17.1
>

Regards,
Simon