[PATCH v3 1/8] arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

The gmac reset has opposite values for the gpio declaration
and the separate reset-active, bring this in line to make
u-boot also find the ethernet-phy.

This mimics the upstream Linux commit found on
https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de

Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
 arch/arm/dts/rk3399-puma.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 07694b196f..531520e771 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -157,7 +157,7 @@
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;
-- 
2.26.2