[PATCHv2 25/31] nxp: Finish switch to CONFIG_NXP_ESBC

[Tom Rini]

There are two remaining users of the CONFIG_SECURE_BOOT symbol that have
not been migrated to another symbol.  In this case, they should be using
CONFIG_NXP_ESBC as their guard.

Cc: Vladimir Oltean <olteanv at gmail.com>
Fixes: 5536c3c9d0d1 ("freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name")
Signed-off-by: Tom Rini <trini at konsulko.com>
---
Changes in v2:
- New patch
---
 Makefile                     | 2 +-
 include/configs/ls1021atsn.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Makefile b/Makefile
index 149f83994814..035b2cc6685a 100644
--- a/Makefile
+++ b/Makefile
@@ -887,7 +887,7 @@ ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
 ifeq ($(CONFIG_SPL_FSL_PBL),y)
 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
 else
-ifneq ($(CONFIG_SECURE_BOOT), y)
+ifneq ($(CONFIG_NXP_ESBC), y)
 # For Secure Boot The Image needs to be signed and Header must also
 # be included. So The image has to be built explicitly
 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index e76e54e97fc9..72aed8fed61c 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -60,9 +60,9 @@
 #define CONFIG_SYS_FSL_PBL_RCW	\
 		"board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg"
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000
-- 
2.17.1