[PATCH] doc: board: xilinx: zynq.rst: add description how to flash a SD card

[Michal Simek]

On 03. 06. 20 11:01, Johannes Krottmayer wrote:
> On 03.06.20 at 08:23,  Michal Simek wrote:
>> On 02. 06. 20 17:55, Johannes Krottmayer wrote:
>>> Add a short description in the ZYNQ documentation how to prepare a SD card and 
>>> copy the related images to SD card.
>>>
>>> I think, it's necessary for the documentation to avoid such user questions
>>> (like mine) in this list.
>>>
>>> Okay?
>>
>> remove these 4 lines above from commit message and move it below ---.
>>
>> And no problem to extend documentation for newcomers.
> 
> Thanks!
> 
>>>
>>> Signed-off-by: Johannes Krottmayer <krjdev at gmail.com>
>>> ---
>>>  doc/board/xilinx/zynq.rst | 19 +++++++++++++++++++
>>>  1 file changed, 19 insertions(+)
>>>
>>> diff --git a/doc/board/xilinx/zynq.rst b/doc/board/xilinx/zynq.rst
>>> index 6a09df1d15..e5f002af85 100644
>>> --- a/doc/board/xilinx/zynq.rst
>>> +++ b/doc/board/xilinx/zynq.rst
>>> @@ -60,6 +60,25 @@ SLCR bootmode register Bit[3:0] values
>>>  "modeboot" variable can assign any of "norboot", "sdboot" or "jtagboot"
>>>  bootmode strings at runtime.
>>>  
>>> +Flashing
>>> +--------
>>> +
>>> +SD Card
>>> +^^^^^^^
>>> +
>>> +To write an image that boots from a SD card first create a FAT32 partition
>>> +and a FAT32 filesystem on the SD card::
>>> +
>>> +        sudo fdisk /dev/sdx
>>> +        sudo mkfs.vfat -F 32 /dev/sdx1
>>> +
>>> +Mount the SD card and copy the SPL and U-Boot to the root directory of the
>>> +SD card::
>>> +
>>> +        sudo mount -t vfat /dev/sdx /mnt
>>
>> here should be /dev/sdx0
>>
> 
> Oops, sorry! But "/dev/sdx1" should be correct according to command
> "sudo mkfs.vfat -F 32 /dev/sdx1".
> 
> At least on my used system. Typo?


grr. yes 1 of course.

M