[PATCH 0/6] revive Theobroma-Systems puma board

Kever Yang kever.yang at rock-chips.com
Thu Jun 4 08:43:08 CEST 2020


Hi Heiko,

     Could you use 'rockchip' instead of 'board' as prefix in the subject?


Thanks,

- Kever

On 2020/6/3 下午10:59, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
>
> This revives the puma boards and makes them boot again with
> mainline uboot.
>
> Main points may be going back to the general fit script and
> cleaning up the devicetree situation that got completely broken
> by the recent sync from mainline linux.
>
>
> Heiko Stuebner (6):
>    arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin
>    board: puma: fix indentation for -u-boot.dtsi
>    board: puma: reorganize devicetrees to actually work and match
>      upstream
>    board: puma: fix indentation of misc_init_r
>    board: puma: allow building with TPL as well
>    board: puma: remove separate fit generator
>
>   arch/arm/dts/Makefile                         |   4 +-
>   arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi  |   4 -
>   arch/arm/dts/rk3399-puma-ddr1333.dts          |   8 -
>   arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi  |   4 -
>   arch/arm/dts/rk3399-puma-ddr1600.dts          |   9 -
>   arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi  |   4 -
>   arch/arm/dts/rk3399-puma-ddr1866.dts          |   8 -
>   arch/arm/dts/rk3399-puma-haikou.dts           | 272 ++++++++++++++++++
>   arch/arm/dts/rk3399-puma-u-boot.dtsi          |  43 +--
>   arch/arm/dts/rk3399-puma.dtsi                 |   2 +-
>   board/theobroma-systems/puma_rk3399/Kconfig   |  15 +
>   .../puma_rk3399/fit_spl_atf.sh                |  94 ------
>   .../puma_rk3399/puma-rk3399.c                 |  30 +-
>   configs/puma-rk3399_defconfig                 |   3 +-
>   14 files changed, 334 insertions(+), 166 deletions(-)
>   delete mode 100644 arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi
>   delete mode 100644 arch/arm/dts/rk3399-puma-ddr1333.dts
>   delete mode 100644 arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi
>   delete mode 100644 arch/arm/dts/rk3399-puma-ddr1600.dts
>   delete mode 100644 arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi
>   delete mode 100644 arch/arm/dts/rk3399-puma-ddr1866.dts
>   create mode 100644 arch/arm/dts/rk3399-puma-haikou.dts
>   delete mode 100755 board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
>




More information about the U-Boot mailing list