[PATCH v4 5/5] usb: xhci-pci: Add reset controller support

Nicolas Saenz Julienne nsaenzjulienne at suse.de
Fri Jun 12 18:46:33 CEST 2020


Some atypical users of xhci-pci might need to manually reset their xHCI
controller before starting the HCD setup. Check if a reset controller
device is available to the PCI bus and trigger a reset.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
---
 drivers/usb/host/xhci-pci.c | 38 +++++++++++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 9fb6d2f763..710524fbb1 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -10,9 +10,14 @@
 #include <init.h>
 #include <log.h>
 #include <pci.h>
+#include <reset.h>
 #include <usb.h>
 #include <usb/xhci.h>
 
+struct xhci_pci_platdata {
+	struct reset_ctl reset;
+};
+
 static void xhci_pci_init(struct udevice *dev, struct xhci_hccr **ret_hccr,
 			  struct xhci_hcor **ret_hcor)
 {
@@ -39,14 +44,43 @@ static void xhci_pci_init(struct udevice *dev, struct xhci_hccr **ret_hccr,
 
 static int xhci_pci_probe(struct udevice *dev)
 {
+	struct xhci_pci_platdata *plat = dev_get_platdata(dev);
 	struct xhci_hccr *hccr;
 	struct xhci_hcor *hcor;
+	int ret;
+
+	ret = reset_get_by_index(dev, 0, &plat->reset);
+	if (ret && ret != -ENOENT) {
+		dev_err(dev, "failed to get reset\n");
+		return ret;
+	}
+
+	if (reset_valid(&plat->reset)) {
+		ret = reset_assert(&plat->reset);
+		if (ret)
+			return ret;
+
+		ret = reset_deassert(&plat->reset);
+		if (ret)
+			return ret;
+	}
 
 	xhci_pci_init(dev, &hccr, &hcor);
 
 	return xhci_register(dev, hccr, hcor);
 }
 
+static int xhci_pci_remove(struct udevice *dev)
+{
+	struct xhci_pci_platdata *plat = dev_get_platdata(dev);
+
+	xhci_deregister(dev);
+	if (reset_valid(&plat->reset))
+		reset_free(&plat->reset);
+
+	return 0;
+}
+
 static const struct udevice_id xhci_pci_ids[] = {
 	{ .compatible = "xhci-pci" },
 	{ }
@@ -56,10 +90,10 @@ U_BOOT_DRIVER(xhci_pci) = {
 	.name	= "xhci_pci",
 	.id	= UCLASS_USB,
 	.probe = xhci_pci_probe,
-	.remove = xhci_deregister,
+	.remove = xhci_pci_remove,
 	.of_match = xhci_pci_ids,
 	.ops	= &xhci_usb_ops,
-	.platdata_auto_alloc_size = sizeof(struct usb_platdata),
+	.platdata_auto_alloc_size = sizeof(struct xhci_pci_platdata),
 	.priv_auto_alloc_size = sizeof(struct xhci_ctrl),
 	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
 };
-- 
2.26.2



More information about the U-Boot mailing list