U-Boot atheros PHY support and cubox ethernet
Sören Moch
smoch at web.de
Wed Jun 24 22:45:21 CEST 2020
Hi Fabio,
On 24.06.20 22:29, Fabio Estevam wrote:
> Hi Soeren,
>
> On Wed, Jun 24, 2020 at 5:13 PM Soeren Moch <smoch at web.de> wrote:
>
>> Schematics are at
>> https://www.tbsdtv.com/download/document/tbs2910/TBS2910-Matrix-ARM-mini-PC-SCH_rev2.1.pdf
> Here is another patch for you to try:
> https://pastebin.com/raw/Dkipgq1n
Still no luck:
U-Boot 2020.07-rc5-00039-g4ff63383e3-dirty (Jun 24 2020 - 22:36:43 +0200)
CPU: Freescale i.MX6Q rev1.2 at 792MHz
CPU: Commercial temperature grade (0C to 95C) at 47C
Reset cause: POR
Model: TBS2910 Matrix ARM mini PC
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: vga
Err: vga
Net: eth0: ethernet at 2188000
PCI:
PCI: pcie phy link never came up
No such bus
starting USB...
Bus usb at 2184000: usb dr_mode not found
Bus usb at 2184200: USB EHCI 1.00
scanning bus usb at 2184000 for devices... 1 USB Device(s) found
scanning bus usb at 2184200 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
Matrix U-Boot> dhcp
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17
Retry time exceeded; starting again
Matrix U-Boot> mdio list
FEC0:
4 - AR8035 <--> ethernet at 2188000
Matrix U-Boot>
More information about the U-Boot
mailing list