[PATCH v3 0/4] mips: Add initial Octeon MIPS64 base support
Stefan Roese
sr at denx.de
Fri Jun 19 15:44:48 CEST 2020
This patch adds very basic support for the Octeon III SoCs. Only CFI
parallel UART, reset and NOR flash are supported for now.
Please note that the basic Octeon port does not include the DDR3/4
initialization yet. This will be added in some follow-up patches later.
To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III
CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such
boards.
v3:
This version is based on the MIPS start.S rework and Linux header sync
from Daniel using this branch: u-boot-mips/header_sync_v2
I removed the very early copy to to L2 cache for now to make the
integration into mainline easier. With all the patches already applied
and the Linux header sync, the resulting patchset is much smaller.
Thanks,
Stefan
Changes in v3:
- Don't "relocate" to L2 cache for now
- Remove inclusion of "common.h"
- Remove inclusion of "common.h"
- Slightly change some copyright messages (adjust year)
Changes in v2:
- Remove custom start.S and use common start.S. Minimal custom lowlevel
init code is currently added in the custom lowlevel_init.S. This needs
to be extended with necessary code, like errata handling etc. But for
a very first basic port, this seems to be all thats needed to boot on
the EBB7304 to the prompt.
- Removed select CREATE_ARCH_SYMLINK
- Removed Octeon II support, as its currently no added in this patchset
- Added cache.c to add the platform specific cache functions as no-ops
for Octeon as the platform is cache coherent
- Removed CONFIG_MIPS_CACHE_COHERENT
- Added CONFIG_CPU_CAVIUM_OCTEON to Kconfig and selected it for Octeon
to enable better sync with the Linux files in the future
- Add get_tbclk() -> no need to define CONFIG_SYS_MIPS_TIMER_FREQ any more
- Removed CONFIG_SYS_MIPS_TIMER_FREQ
Aaron Williams (1):
mips: octeon: Initial minimal support for the Marvell Octeon SoC
Stefan Roese (3):
sysreset: Add Octeon sysreset driver
mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file
mips: octeon: Add minimal Octeon 3 EBB7304 EVK support
MAINTAINERS | 7 ++
arch/mips/Kconfig | 41 ++++++++
arch/mips/Makefile | 3 +
arch/mips/dts/Makefile | 1 +
arch/mips/dts/mrvl,cn73xx.dtsi | 64 +++++++++++++
arch/mips/dts/mrvl,octeon-ebb7304.dts | 96 +++++++++++++++++++
arch/mips/mach-octeon/Kconfig | 60 ++++++++++++
arch/mips/mach-octeon/Makefile | 10 ++
arch/mips/mach-octeon/cache.c | 20 ++++
arch/mips/mach-octeon/clock.c | 27 ++++++
arch/mips/mach-octeon/cpu.c | 57 +++++++++++
arch/mips/mach-octeon/dram.c | 28 ++++++
arch/mips/mach-octeon/include/ioremap.h | 30 ++++++
arch/mips/mach-octeon/include/mach/cavm-reg.h | 42 ++++++++
arch/mips/mach-octeon/include/mach/clock.h | 22 +++++
arch/mips/mach-octeon/lowlevel_init.S | 19 ++++
board/Marvell/octeon_ebb7304/Kconfig | 19 ++++
board/Marvell/octeon_ebb7304/MAINTAINERS | 7 ++
board/Marvell/octeon_ebb7304/Makefile | 8 ++
board/Marvell/octeon_ebb7304/board.c | 9 ++
configs/octeon_ebb7304_defconfig | 37 +++++++
drivers/sysreset/Kconfig | 7 ++
drivers/sysreset/Makefile | 1 +
drivers/sysreset/sysreset_octeon.c | 52 ++++++++++
include/configs/octeon_common.h | 25 +++++
include/configs/octeon_ebb7304.h | 20 ++++
scripts/config_whitelist.txt | 1 -
27 files changed, 712 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/dts/mrvl,cn73xx.dtsi
create mode 100644 arch/mips/dts/mrvl,octeon-ebb7304.dts
create mode 100644 arch/mips/mach-octeon/Kconfig
create mode 100644 arch/mips/mach-octeon/Makefile
create mode 100644 arch/mips/mach-octeon/cache.c
create mode 100644 arch/mips/mach-octeon/clock.c
create mode 100644 arch/mips/mach-octeon/cpu.c
create mode 100644 arch/mips/mach-octeon/dram.c
create mode 100644 arch/mips/mach-octeon/include/ioremap.h
create mode 100644 arch/mips/mach-octeon/include/mach/cavm-reg.h
create mode 100644 arch/mips/mach-octeon/include/mach/clock.h
create mode 100644 arch/mips/mach-octeon/lowlevel_init.S
create mode 100644 board/Marvell/octeon_ebb7304/Kconfig
create mode 100644 board/Marvell/octeon_ebb7304/MAINTAINERS
create mode 100644 board/Marvell/octeon_ebb7304/Makefile
create mode 100644 board/Marvell/octeon_ebb7304/board.c
create mode 100644 configs/octeon_ebb7304_defconfig
create mode 100644 drivers/sysreset/sysreset_octeon.c
create mode 100644 include/configs/octeon_common.h
create mode 100644 include/configs/octeon_ebb7304.h
--
2.27.0
More information about the U-Boot
mailing list