[PATCH 1/2] sunxi: mmc: Fix T113-s3 MMC clock divider

[Andre Przywara]

On the Allwinner D1/R528/T113-s3 SoCs the MMC clock source selected by
mux value 1 is PLL_PERIPH0(1x), not (2x), as in the other SoCs.
But we have still the hidden divisor of 2 in the MMC mod clock, so
need to explicitly compensate for that on those SoCs.

This leads to the actually programmed clock rate to be double compared
to before, which increases the MMC performance on those SoCs.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
Reported-by: Kuba Szczodrzyński <kuba at szczodrzynski.pl>
---
 drivers/mmc/sunxi_mmc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index 0b56d1405be..8f72d758e46 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -92,6 +92,13 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
 		pll = CCM_MMC_CTRL_PLL6;
 		pll_hz = clock_get_pll6();
 #endif
+		/*
+		 * On the D1/R528/T113 mux source 1 refers to PLL_PERIPH0(1x),
+		 * like for the older SoCs. However we still have the hidden
+		 * divider of 2x, so compensate for that here.
+		 */
+		if (IS_ENABLED(CONFIG_MACH_SUN8I_R528))
+			pll_hz /= 2;
 	}
 
 	div = pll_hz / hz;
-- 
2.25.1