[PATCH v3 4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access

[Dario Binacchi]

From: Michael Bode <michael.bode at bshg.com>

A small delay between DRAM read access with wrong parameters and
reconfiguration is necessary.
Without a delay between DRAM read access and a following reconfiguration
this reconfiguration fails for certain DRAM chips (Nanya).

Signed-off-by: Michael Bode <michael.bode at bshg.com>
Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>

---

Changes in v3:
- Drop changes on arch/arm/include/asm/arch-mx6/mx6-ddr.h and
  arch/arm/mach-imx/mx6/ddr.c files from patch
  [1/1] "board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD
  table"

Changes in v2:
- Add 'static struct' globally in the module where the definitions
  can mabe static.
- Use standard C comment style
- Remove unnecessary variable initializations

 board/bsh/imx6ulz_smm_m2/spl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/board/bsh/imx6ulz_smm_m2/spl.c b/board/bsh/imx6ulz_smm_m2/spl.c
index e8255b6d2a62..c330e4d6d39d 100644
--- a/board/bsh/imx6ulz_smm_m2/spl.c
+++ b/board/bsh/imx6ulz_smm_m2/spl.c
@@ -13,6 +13,7 @@
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
+#include <linux/delay.h>
 #include <linux/libfdt.h>
 #include <spl.h>
 #include <asm/arch/mx6-ddr.h>
@@ -65,10 +66,12 @@ static void spl_dram_init(void)
 		/* Already configured, nothing to do */
 		break;
 	case SZ_256M:
+		udelay(1);
 		ddr_cfg_write(&bsh_dram_timing_256mb);
 		break;
 	case SZ_128M:
 	default:
+		udelay(1);
 		ddr_cfg_write(&bsh_dram_timing_128mb);
 		break;
 	}
-- 
2.43.0

base-commit: a3e09b24ffd4429909604f1b28455b44306edbaa
branch: bsh-202505-RAM