[RFC PATCH 0/5] Add initial support for AM62D2-EVM

Paresh Bhagat p-bhagat at ti.com
Tue Sep 2 08:06:58 CEST 2025


The AM62D2 SoC, part of the K3 architecture, is built for high-performance
DSP tasks in automotive audio, pro audio, radar, sonar, and medical
imaging. It features up to four Cortex-A53 cores (1.4GHz), two Cortex-R5F
cores, and a C7x DSP with 2 TOPS MMA. Key interfaces include multi-channel
McASP audio, TSN-capable Gigabit Ethernet, and a range of peripherals
(UART, SPI, I2C, CAN, USB, eMMC/SD, OSPI, CSI). It supports LPDDR4/DDR4,
secure boot with hardware security, and low-power modes with
CAN/GPIO/UART wakeup.

AM62D2-EVM evaluation module (EVM) is a low-cost expandable platform
board designed for AM62D2 SoC from TI. It supports the following
interfaces:

* 4 GB LPDDR4 RAM
* x2 Gigabit Ethernet expansion connectors
* x4 3.5mm TRS Audio Jack Line In
* x4 3.5mm TRS Audio Jack Line Out
* x2 Audio expansion connectors
* x1 Type-A USB 2.0, x1 Type-C dual-role device (DRD) USB 2.0
* x1 UHS-1 capable micro SD card slot
* 32 GB eMMC Flash
* 512 Mb OSPI NOR flash
* x4 UARTs via USB 2.0-B
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs

Also resuse Soc specific files from AM62A. A key distinction from AM62A
is that the AM62D does not include multimedia components such as the
video encoder/decoder, MJPEG encoder, Vision Processing Accelerator
(VPAC) for image signal processing, or the display subsystem.
Additionally, the AM62D has a different pin configuration compared to
the AM62A.

Technical Reference Manual - https://www.ti.com/lit/pdf/sprujd4
Schematics Link - https://www.ti.com/lit/zip/sprcal5

Branch used-next

Kernel Patch
https://lore.kernel.org/all/20250708085839.1498505-1-p-bhagat@ti.com/

Boot Logs
https://gist.github.com/paresh-bhagat12/6e169340c222427c7648b1ef3ca5067f

Paresh Bhagat (5):
  board: ti: Introduce the basic files needed to support am62d
  board: ti: am62dx: Add board configs for am62d
  configs: Introduce configs for the AM62D2-EVM
  arch: mach-k3: Introduce support for AM62D2-EVM
  arm: dts: Introduce AM62D2-EVM dtbs

 arch/arm/dts/Makefile                        |    2 +
 arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi | 2802 ++++++++++++++++++
 arch/arm/dts/k3-am62d-evm-binman.dtsi        |  359 +++
 arch/arm/dts/k3-am62d2-evm-u-boot.dtsi       |   14 +
 arch/arm/dts/k3-am62d2-r5-evm.dts            |   82 +
 arch/arm/mach-k3/am62ax/Kconfig              |   25 +
 board/ti/am62dx/Kconfig                      |   26 +
 board/ti/am62dx/MAINTAINERS                  |    8 +
 board/ti/am62dx/Makefile                     |    7 +
 board/ti/am62dx/am62dx.env                   |   21 +
 board/ti/am62dx/board-cfg.yaml               |   36 +
 board/ti/am62dx/evm.c                        |   37 +
 board/ti/am62dx/pm-cfg.yaml                  |   12 +
 board/ti/am62dx/rm-cfg.yaml                  | 1047 +++++++
 board/ti/am62dx/sec-cfg.yaml                 |  379 +++
 board/ti/am62dx/tifs-rm-cfg.yaml             |  903 ++++++
 configs/am62dx_evm_a53_defconfig             |   22 +
 configs/am62dx_evm_r5_defconfig              |   20 +
 18 files changed, 5802 insertions(+)
 create mode 100644 arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi
 create mode 100644 arch/arm/dts/k3-am62d-evm-binman.dtsi
 create mode 100644 arch/arm/dts/k3-am62d2-evm-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-am62d2-r5-evm.dts
 create mode 100644 board/ti/am62dx/Kconfig
 create mode 100644 board/ti/am62dx/MAINTAINERS
 create mode 100644 board/ti/am62dx/Makefile
 create mode 100644 board/ti/am62dx/am62dx.env
 create mode 100644 board/ti/am62dx/board-cfg.yaml
 create mode 100644 board/ti/am62dx/evm.c
 create mode 100644 board/ti/am62dx/pm-cfg.yaml
 create mode 100644 board/ti/am62dx/rm-cfg.yaml
 create mode 100644 board/ti/am62dx/sec-cfg.yaml
 create mode 100644 board/ti/am62dx/tifs-rm-cfg.yaml
 create mode 100644 configs/am62dx_evm_a53_defconfig
 create mode 100644 configs/am62dx_evm_r5_defconfig

-- 
2.34.1



More information about the U-Boot mailing list