September 2025 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Sep 1 00:25:01 CEST 2025
Ending: Tue Sep 9 07:58:23 CEST 2025
Messages: 467

• 回复: [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Alice Guo (OSS)
• 回复: 回复: [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Alice Guo (OSS)
• [PATCH] mmc: iproc_sdhci: Cannot test unsigned variable for negative   Peng Fan (OSS)
• [PATCH] mmc: core: drop space before newline in trace printf   Peng Fan (OSS)
• [PATCH 0/6] Use correct LDO5 control registers for PCA9450   Peng Fan (OSS)
• [PATCH 00/11] power: update compatibles for PMICs used by exynos devices   Peng Fan (OSS)
• [PATCH v3 1/2] power: pmic: pca9450: Add support for system reset   Peng Fan (OSS)
• [PATCH] airoha: rework RAM size handling to support multiple RAM size   Weijie Gao (高惟杰)
• [PATCH] sandbox: replace deprecated getenv() with env_get()   Osama Abdelkader
• [PATCH v3] disk: efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• [PATCH 1/1] bloblist: use correct types for physical addresses   Ilias Apalodimas
• [PATCH] bloblist: adjust default bloblist size after reloc   Ilias Apalodimas
• [PATCH] arm64: Properly clear BSS   Ilias Apalodimas
• [PATCH] arm64: Properly clear BSS   Ilias Apalodimas
• [PATCH v4] disk: efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• [PATCH v5] disk: efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• [PATCH 3/4] phy: qcom-qmp-ufs: Import SM7150 tables from Linux   Neil Armstrong
• [PATCH 1/2] ufs: Add support for sending UFS attribute requests   Neil Armstrong
• [PATCH] pwm: meson: Stop premature exit from for loop   Neil Armstrong
• [PATCH] net: mdio: mux-meson-gxl: set reversed bit when using internal phy   Neil Armstrong
• [PATCH v3] pinctrl: meson: support gpio toggle command   Neil Armstrong
• [PATCH] adc: meson-saradc: uint cannot be less than zero   Neil Armstrong
• [PATCH] clk: meson: Remove unreachable code   Neil Armstrong
• [PATCH] pwm: meson: Stop premature exit from for loop   Neil Armstrong
• [PATCH RFC 3/9] mmc: meson_gx_mmc: don't bail if there is no clock driver   Neil Armstrong
• [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Neil Armstrong
• [PATCH RFC 8/9] board: amlogic: add kconfig fragments for SPL   Neil Armstrong
• [PATCH RFC 7/9] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Neil Armstrong
• [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs   Neil Armstrong
• [PATCH RFC 6/9] arm: meson: spl: add support for SPL DRAM init   Neil Armstrong
• [PATCH v2] pinctrl: rzg2l: Variable may not have been assigned to   Paul Barker
• [PATCH v2 1/1] virtio: blk: support block sizes exceeding 512 bytes   Emil Renner Berthing
• [RFC PATCH 0/5] Add initial support for AM62D2-EVM   Paresh Bhagat
• [RFC PATCH 1/5] board: ti: Introduce the basic files needed to support am62d   Paresh Bhagat
• [RFC PATCH 2/5] board: ti: am62dx: Add board configs for am62d   Paresh Bhagat
• [RFC PATCH 3/5] configs: Introduce configs for the AM62D2-EVM   Paresh Bhagat
• [RFC PATCH 4/5] arch: mach-k3: Introduce support for AM62D2-EVM   Paresh Bhagat
• [RFC PATCH 5/5] arm: dts: Introduce AM62D2-EVM dtbs   Paresh Bhagat
• [RFC PATCH 5/5] arm: dts: Introduce AM62D2-EVM dtbs   Paresh Bhagat
• [RFC PATCH 0/5] Add initial support for AM62D2-EVM   Paresh Bhagat
• [RFC PATCH v2 0/5] Add initial support for AM62D2-EVM   Paresh Bhagat
• [RFC PATCH v2 1/5] board: ti: Introduce the basic files needed to support am62d   Paresh Bhagat
• [RFC PATCH v2 2/5] board: ti: am62dx: Add board configs for am62d   Paresh Bhagat
• [RFC PATCH v2 3/5] arch: mach-k3: Introduce support for AM62D2-EVM   Paresh Bhagat
• [RFC PATCH v2 4/5] arm: dts: Introduce AM62D2-EVM dtbs   Paresh Bhagat
• [RFC PATCH v2 5/5] configs: Introduce configs for the AM62D2-EVM   Paresh Bhagat
• [PATCH v1] ARM: amlogic: fix JetHub D1 eth mac fallback generation   Viacheslav Bocharov
• [PATCH 1/2] ti: Do not try to read the mac address if no NET is enabled   Maarten Brock
• [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Maarten Brock
• [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Maarten Brock
• [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Maarten Brock
• [PATCH 1/2] ti: Do not try to read the mac address if no NET is enabled   Maarten Brock
• [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
• [PATCH] clk: stm32: Pass udevice pointer to clk_register_composite()   Patrice CHOTARD
• [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Adriano Carvalho
• [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Adriano Carvalho
• [PATCH 1/4] clk/qcom: add driver for SM7150 GCC   Casey Connolly
• [PATCH 2/4] pinctrl: qcom: add SM7150 pinctrl driver   Casey Connolly
• [PATCH 4/4] configs: qcom_defconfig: Enable SM7150 GCC and Pinctrl   Casey Connolly
• [PATCH v1] board: ti: common: Kconfig: add CMD_MEMINFO   Anshul Dalal
• [PATCH v2 0/2] Fix dma_addr_t for R5 SPL   Anshul Dalal
• [PATCH v2 1/2] dma: ti: k3-udma: fix dma_addr_t typecasts   Anshul Dalal
• [PATCH v2 2/2] config: arch: k3: enable DMA_ADDR_T_64BIT   Anshul Dalal
• [PATCH v1] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
• [PATCH v3 0/2] Fix dma_addr_t for R5 SPL   Anshul Dalal
• [PATCH v3 1/2] dma: ti: k3-udma: fix dma_addr_t typecasts   Anshul Dalal
• [PATCH v3 2/2] config: arch: k3: enable DMA_ADDR_T_64BIT   Anshul Dalal
• [PATCH -next v6 0/9] Add support for dynamic MMU configuration   Anshul Dalal
• [PATCH -next v6 01/10] mach-k3: use minimal memory map for all K3   Anshul Dalal
• [PATCH -next v6 02/10] mach-k3: use custom enable_cache   Anshul Dalal
• [PATCH -next v6 03/10] arm: armv8: mmu: export mmu_setup   Anshul Dalal
• [PATCH -next v6 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
• [PATCH -next v6 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
• [PATCH -next v6 06/10] mach-k3: map all banks using mem_map_fix_dram_banks   Anshul Dalal
• [PATCH -next v6 07/10] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
• [PATCH -next v6 08/10] spl: split spl_board_fixups to arch/board specific   Anshul Dalal
• [PATCH -next v6 09/10] mach-k3: add reserved memory fixups for next boot stage   Anshul Dalal
• [PATCH -next v6 10/10] mach-k3: add carveouts for TFA and optee   Anshul Dalal
• [RFC PATCH 5/5] arm: dts: Introduce AM62D2-EVM dtbs   Andrew Davis
• [PATCH] configs/coreboot_defconfig: Set X86_LOAD_FROM_32_BIT to use own GDT   Benjamin Doron
• [PATCH] cmd: terminal: avoid serial_reinit_all() with DM_SERIAL enabled   Aditya Dutt
• [PATCH] cmd: terminal: avoid serial_reinit_all() with DM_SERIAL enabled   Aditya Dutt
• [PATCH v2 0/4] AM57 boot fixes   Anurag Dutta
• [PATCH v2 1/4] include: env: ti: Use .env for environment variables   Anurag Dutta
• [PATCH v2 2/4] board: ti: am57xx: Change to using .env   Anurag Dutta
• [PATCH v2 3/4] board: ti: am57xx: Set fdtfile from C code instead of findfdt script   Anurag Dutta
• [PATCH v2 4/4] board: ti: dra7xx: Set fdtfile from C code instead of findfdt script   Anurag Dutta
• [PATCH v2 0/3] Hyperflash boot fixes for j721e   Anurag Dutta
• [PATCH v2 1/3] mtd: Kconfig: Add SPL_MUX_MMIO dependency to HBMC driver   Anurag Dutta
• [PATCH v2 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Anurag Dutta
• [PATCH v2 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Anurag Dutta
• [PATCH v3 0/3] Hyperflash boot fixes for j721e   Anurag Dutta
• [PATCH v3 1/3] mtd: Kconfig: Add SPL_MUX_MMIO dependency to HBMC driver   Anurag Dutta
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Anurag Dutta
• [PATCH v3 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Anurag Dutta
• [PATCH v2 0/4] AM57 boot fixes   Dutta, Anurag
• [PATCH -next v6 0/9] Add support for dynamic MMU configuration   Wadim Egorov
• [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20250905a   Fabio Estevam
• [PATCH] tools: imx8image: Make imx8image_check_params() static   Fabio Estevam
• [PATCH] arm: dts: imx93-phyboard-segin-u-boot: Clean-up already upstream nodes   Fabio Estevam
• [PATCH 11/11] imx: kontron-sl-mx6ul: Switch to OF_UPSTREAM   Fabio Estevam
• [Upstream] [PATCH 1/2] configs: imx93-phycore_defconfig: Disable CONFIG_AHAB_BOOT   Fabio Estevam
• [PATCH v2] imx8m[m,n,p]_evk: Add redundant environment support   Fabio Estevam
• [PATCH v4] Add imx8mp-libra-fpsc board   Fabio Estevam
• [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Fabio Estevam
• [PATCH v2 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Yannick FERTRE
• [PATCH v2 2/7] video: simple_panel: add support for "panel-lvds" display   Yannick FERTRE
• [PATCH v2 3/7] video: stm32: STM32 driver support for LVDS   Yannick FERTRE
• [PATCH v2 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Yannick FERTRE
• [PATCH v2 5/7] video: stm32: ltdc: properly search the first available panel   Yannick FERTRE
• [PATCH v2 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Yannick FERTRE
• [PATCH v2 7/7] configs: stm32mp25: enable LVDS display support   Yannick FERTRE
• [PATCH v2 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Yannick FERTRE
• [GIT PULL] Please pull mmc-power-next-2025-09-01   Peng Fan
• [PATCH 2/2] mmc: adi_sdhci: Update headers   Peng Fan
• [PATCH v3] imx8: Add ahab_commit command   Peng Fan
• [PATCH v1] pcie: starfive: Fix the incorrect use of dev_err()   Hal Feng
• [PATCH v2] pcie: starfive: Remove the redundant print of probe success   Hal Feng
• [RFC 05/10] eeprom: starfive: Update eeprom data format version to 3   Hal Feng
• [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   Hal Feng
• [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Hal Feng
• [PATCH] net: introduce CONFIG_DNS   Jerome Forissier
• LWIP buffer alignment   Jerome Forissier
• [PATCH v2 0/7] Add display support for STM32MP25   Raphael Gallais-Pou
• [PATCH v2 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Raphael Gallais-Pou
• [PATCH v2 2/7] video: simple_panel: add support for "panel-lvds" display   Raphael Gallais-Pou
• [PATCH v2 3/7] video: stm32: STM32 driver support for LVDS   Raphael Gallais-Pou
• [PATCH v2 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Raphael Gallais-Pou
• [PATCH v2 5/7] video: stm32: ltdc: properly search the first available panel   Raphael Gallais-Pou
• [PATCH v2 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Raphael Gallais-Pou
• [PATCH v2 7/7] configs: stm32mp25: enable LVDS display support   Raphael Gallais-Pou
• [PATCH v3 0/7] Add display support for STM32MP25   Raphael Gallais-Pou
• [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Raphael Gallais-Pou
• [PATCH v3 2/7] video: simple_panel: add support for "panel-lvds" display   Raphael Gallais-Pou
• [PATCH v3 3/7] video: stm32: STM32 driver support for LVDS   Raphael Gallais-Pou
• [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Raphael Gallais-Pou
• [PATCH v3 5/7] video: stm32: ltdc: properly search the first available panel   Raphael Gallais-Pou
• [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Raphael Gallais-Pou
• [PATCH v3 7/7] configs: stm32mp25: enable LVDS display support   Raphael Gallais-Pou
• [PATCH v3 0/5] Add support for MediaTek MT7987/MT7988 built-in 2.5Gb ethernet PHY (v3)   Weijie Gao
• [PATCH v3 1/5] misc: fs_loader: allow returning actual firmware data size in request_firmware_into_buf_via_script()   Weijie Gao
• [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
• [PATCH v3 3/5] net: mediatek: associate PHY device with dts node specified by phy-handle   Weijie Gao
• [PATCH v3 4/5] net: phy: Add MediaTek built-in 2.5Gb ethernet PHY driver   Weijie Gao
• [PATCH v3 5/5] MAINTAINERS: update ethernet-related file list for MediaTek ARM platform   Weijie Gao
• [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
• [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
• [PATCH v4 0/5] Add support for MediaTek MT7987/MT7988 built-in 2.5Gb ethernet PHY (v4)   Weijie Gao
• [PATCH v4 1/5] misc: fs_loader: allow returning actual firmware data size in request_firmware_into_buf_via_script()   Weijie Gao
• [PATCH v4 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
• [PATCH v4 3/5] net: mediatek: associate PHY device with dts node specified by phy-handle   Weijie Gao
• [PATCH v4 4/5] net: phy: Add MediaTek built-in 2.5Gb ethernet PHY driver   Weijie Gao
• [PATCH v4 5/5] MAINTAINERS: update ethernet-related file list for MediaTek ARM platform   Weijie Gao
• [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Sumit Garg
• [PATCH v2 0/6] Fix UART autoboot issues on DragonBoard 410c   Sumit Garg
• [PATCH v2 0/6] Fix UART autoboot issues on DragonBoard 410c   Stephan Gerhold
• [PATCH v2 1/6] board: dragonboard410c: Drop now unneeded bootph-all for console   Stephan Gerhold
• [PATCH v2 2/6] Revert "serial: serial_msm: Delay initialization to let pins stabilize"   Stephan Gerhold
• [PATCH v2 3/6] serial: msm: Cleanup register naming   Stephan Gerhold
• [PATCH v2 4/6] serial: msm: Reset after writing to DMEN   Stephan Gerhold
• [PATCH v2 5/6] serial: msm: Re-enable after resetting   Stephan Gerhold
• [PATCH v2 6/6] serial: msm: Use single character mode   Stephan Gerhold
• [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Stephan Gerhold
• [PATCH 0/6] Make MPFS Generic   Jamie Gibbons
• [PATCH 1/6] board: microchip: icicle: rename all icicle files to generic   Jamie Gibbons
• [PATCH 2/6] configs/microchip_mpfs_generic_defconfig: add board   Jamie Gibbons
• [PATCH 3/6] doc: microchip: introduce common sections   Jamie Gibbons
• [PATCH 4/6] doc: microchip: add mpfs_video.rst   Jamie Gibbons
• [PATCH 5/6] misc: mpfs_syscontroller: add functions to read device tree overlays   Jamie Gibbons
• [PATCH 6/6] board: microchip: mpfs_generic: include processing of dtbos   Jamie Gibbons
• [PATCH v1] mach-k3: fix reading size and addr from fdt on R5   Dhruva Gole
• [PATCH] power: regulator: Fix incorrect use of binary and   Andrew Goodbody
• [PATCH v2] power: regulator: Fix incorrect use of binary and   Andrew Goodbody
• [PATCH] spi: exynos: Remove extra term from test   Andrew Goodbody
• [PATCH v2] spi: exynos: Remove extra term from test   Andrew Goodbody
• [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Andrew Goodbody
• Smatch report for Cadence PWM   Andrew Goodbody
• [PATCH] pwm: cadence-ttc: Insufficient elements in array   Andrew Goodbody
• [PATCH RFC 0/9] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
• [PATCH RFC 1/9] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
• [PATCH RFC 2/9] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
• [PATCH RFC 3/9] mmc: meson_gx_mmc: don't bail if there is no clock driver   Ferass El Hafidi
• [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
• [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
• [PATCH RFC 6/9] arm: meson: spl: add support for SPL DRAM init   Ferass El Hafidi
• [PATCH RFC 7/9] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
• [PATCH RFC 8/9] board: amlogic: add kconfig fragments for SPL   Ferass El Hafidi
• [PATCH RFC 9/9] doc: board: amlogic: add u-boot-spl documentation   Ferass El Hafidi
• [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
• LWIP buffer alignment   Tim Harvey
• LWIP buffer alignment   Tim Harvey
• [PATCH] crypto/rng: double the entropy delay interval for retry   Gaurav Jain
• [PATCH] clk: exynos: Fix always true test   Minkyu Kang
• [PATCH 00/10] samsung: e850-96: Enable USB host and Ethernet   Minkyu Kang
• [PATCH 0/3] ARM: exynos: fix origen description and align and add \n to pinmux msgs   Minkyu Kang
• [PATCH v2] spi: exynos: Remove extra term from test   Minkyu Kang
• please pull u-boot-samsung master   Minkyu Kang
• [PATCH] airoha: rework RAM size handling to support multiple RAM size   Mikhail Kshevetskiy
• [PATCH RESEND v5 0/2] cmd: mtd: fix benchmarking   Mikhail Kshevetskiy
• [PATCH RESEND v5 1/2] cmd: mtd: fix speed measurement in the speed benchmark   Mikhail Kshevetskiy
• [PATCH RESEND v5 2/2] cmd: mtd: add benchmark option to the help   Mikhail Kshevetskiy
• [PATCH 0/3] cmd: mtd: improvements   Mikhail Kshevetskiy
• [PATCH 1/3] cmd: mtd: add markbad command support   Mikhail Kshevetskiy
• [PATCH 2/3] cmd: mtd: add nand_write_test command support   Mikhail Kshevetskiy
• [PATCH 3/3] cmd: mtd: add nand_read_test command support   Mikhail Kshevetskiy
• [PATCH v2 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
• [PATCH v2 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Kumar, Udit
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
• [PATCH v3 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Kumar, Udit
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
• [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Jonas Kvinge
• No console output on Raspberry Pi Compute Module 5   Jonas Kvinge
• Call for Participation: Embedded & IoT micro-conference at Linux Plumbers 2025   Jan Lübbe
• [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Kory Maincent
• [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Kory Maincent
• [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Kory Maincent
• [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Łukasz Majewski
• [PATCH 0/2] Fix ADI driver header dependencies   Greg Malysa
• [PATCH 1/2] net: dwc_eth_qos_adi: Add missing header   Greg Malysa
• [PATCH 2/2] mmc: adi_sdhci: Update headers   Greg Malysa
• [PATCH v2 1/2] dma: ti: k3-udma: fix dma_addr_t typecasts   Prasanth Mantena
• [PATCH v3 2/2] config: arch: k3: enable DMA_ADDR_T_64BIT   Prasanth Mantena
• [PATCH] mmc: core: style fixes in mmc.c   Bhimeswararao Matsa
• [PATCH] board: ti: fdt_ops: make ti_set_fdt_env() const-correct   Bhimeswararao Matsa
• [PATCH] doc: add README.pmic guide for PMIC/regulator framework   Bhimeswararao Matsa
• [PATCH v1 4/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Max Merchel
• [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
• [PATCH 0/1] Add compatible for ADP5587   Philip Molloy
• [PATCH 1/1] gpio: adp5588: Add ADP5587 as compatible   Philip Molloy
• [PATCH v3] Add imx8mp-libra-fpsc board   Yannic Moog
• [PATCH v3] Add imx8mp-libra-fpsc board   Yannic Moog
• [PATCH v4] Add imx8mp-libra-fpsc board   Yannic Moog
• [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
• [PATCH v2 2/2] doc: phytec: update imx8m docs for optee builds   Yannic Moog
• [PATCH v3 0/3] PHYTEC imx8m boards: enable OP-TEE as default   Yannic Moog
• [PATCH v3 1/3] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
• [PATCH v3 2/3] doc: phytec: update imx8m docs for optee builds   Yannic Moog
• [PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update   Yannic Moog
• [PATCH v3] net: xgmac: Augment mdio read/write with cl-45 format support   Ng, Boon Khai
• [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Philip Oberfichtner
• [PATCH v3 0/5] Simplify image size checks   Philip Oberfichtner
• [PATCH v3 1/5] Image size checks: Move all configs in one place   Philip Oberfichtner
• [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
• [PATCH v3 3/5] Image size checks: Use consistent help texts   Philip Oberfichtner
• [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Philip Oberfichtner
• [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Philip Oberfichtner
• [PATCH v3 1/5] Image size checks: Move all configs in one place   Philip Oberfichtner
• [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
• [PATCH v3 3/5] Image size checks: Use consistent help texts   Philip Oberfichtner
• [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Philip Oberfichtner
• [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Philip Oberfichtner
• [PATCH v3 1/5] Image size checks: Move all configs in one place   Philip Oberfichtner
• [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
• [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Philip Oberfichtner
• [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Philip Oberfichtner
• [RFC PATCH 0/5] Add initial support for AM62D2-EVM   Raghavendra, Vignesh
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
• [PATCH v2] drivers: clk: agilex: Correct EMAC clock source selection   Ravulapalli, Naresh Kumar
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
• [PATCH v1] clk: Only enable the parent clock if the clock was enabled before reparenting   Miquel Raynal
• [PATCH 0/3] cmd: mtd: improvements   Miquel Raynal
• [PATCH 2/4] pinctrl: qcom: add SM7150 pinctrl driver   Jens Reidel
• [PATCH] SUNXI / TWSI: Implement I2C bus unlocking for stuck devices during initialization.   Federico Fuga via B4 Relay
• [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
• [PATCH v2 2/2] doc: phytec: update imx8m docs for optee builds   Teresa Remmet
• [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
• [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
• [PATCH v3 1/3] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
• [PATCH v3 2/3] doc: phytec: update imx8m docs for optee builds   Teresa Remmet
• Re   Head of Group Human Resources
• [PATCH v2 1/2] power: Correct dependencies on POWER_LEGACY   Tom Rini
• [PATCH] power: Tighten some power driver dependencies   Tom Rini
• [PATCH 0/2] power: Address two Smatch reported issues   Tom Rini
• (subset) [PATCH 0/6] power: regulator: Fix some Smatch reported issues   Tom Rini
• [PATCH] test: Update logic for video test   Tom Rini
• [GIT PULL] Please pull mmc-power-next-2025-09-01   Tom Rini
• [PATCH v2 0/4] AM57 boot fixes   Tom Rini
• [MASTER] Pull request efi-2025-10-rc4   Tom Rini
• [PATCH 1/2] ti: Do not try to read the mac address if no NET is enabled   Tom Rini
• [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Tom Rini
• Pull request: u-boot-rockchip-20250831   Tom Rini
• [GIT PULL] Please pull mmc-power-next-2025-09-01   Tom Rini
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Tom Rini
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Tom Rini
• [PATCH 0/3] memtest performance improvements   Tom Rini
• [PATCH v2] env: Remove usb_ignorelist and env_fdt_path from ifdef CONFIG_ENV_VARS_UBOOT_CONFIG   Tom Rini
• [PATCH v2] env: Fix up indent   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Tom Rini
• [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Tom Rini
• [PATCH v3 1/5] Image size checks: Move all configs in one place   Tom Rini
• please pull u-boot-samsung master   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20250905a   Tom Rini
• [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Tom Rini
• [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Tom Rini
• [PATCH] configs: Fix crash on coreboot x86   Tom Rini
• [PATCH] thermal: Convert .get_temp() return value to millicelsius   Tom Rini
• 回复: [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH v2 0/4] AM57 boot fixes   Tom Rini
• [PATCH v1] MAINTAINERS: Add entry for DesignWare XGMAC driver   Tom Rini
• [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Tom Rini
• [ANN] U-Boot v2025.10-rc4 released   Tom Rini
• [TESTHOOKS PATCH 1/1] travis-ci: add qemu-riscv64_smode* test environments   Tom Rini
• [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Tom Rini
• [PATCH v3] imx8: Add ahab_commit command   John Ripple
• [PATCH] configs: Fix crash on coreboot x86   Patrick Rudolph
• [PATCH v1 0/2] Tegra20: sl101: fix Hall sensor behavior   Svyatoslav Ryhel
• [PATCH v1 1/2] ARM: tegra20: transformer: fix Hall sensor behavior   Svyatoslav Ryhel
• [PATCH v1 2/2] board: transformer-t20: add separate env for SL101   Svyatoslav Ryhel
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
• [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Svyatoslav Ryhel
• [PATCH] cmd: Remove default prompt from output   Heiko Schocher
• [PATCH] tools: Drop meaningless comment from Makefile   Heiko Schocher
• [PATCH v3] imx8: Add ahab_commit command   Heiko Schocher
• [GIT PULL] Please pull mmc-power-next-2025-09-01   Frieder Schrempf
• [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Frieder Schrempf
• [GIT PULL] Please pull mmc-power-next-2025-09-01   Frieder Schrempf
• [PATCH 1/1] bloblist: use correct types for physical addresses   Heinrich Schuchardt
• [PATCH] bloblist: adjust default bloblist size after reloc   Heinrich Schuchardt
• [TESTHOOKS PATCH 1/1] travis-ci: add qemu-riscv64_smode* test environments   Heinrich Schuchardt
• [RFC 03/10] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   Heinrich Schuchardt
• [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   Heinrich Schuchardt
• [RFC 10/10] board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection   Heinrich Schuchardt
• [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Heinrich Schuchardt
• [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Heinrich Schuchardt
• [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Heinrich Schuchardt
• [PATCH 4/8] tools: rkcommon: Mark rkcommon_is_header_v2() as static   Quentin Schulz
• [PATCH] doc: add README.pmic guide for PMIC/regulator framework   Quentin Schulz
• [PATCH] thermal: Convert .get_temp() return value to millicelsius   Quentin Schulz
• [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Sidharth Seela
• [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Sidharth Seela
• [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Sidharth Seela
• [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Sidharth Seela
• [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Sidharth Seela
• [PATCH v1] [v1] scripts/Makefile.lib: increase detail for dtsi debug output   E Shattow
• [PATCH v2] scripts/Makefile.lib: increase detail for dtsi debug output   E Shattow
• [PATCH v1] configs: starfive: Add visionfive2 CONFIG_DNS enabled   E Shattow
• [PATCH] net: introduce CONFIG_DNS   E Shattow
• [RFC 01/10] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts   E Shattow
• [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   E Shattow
• [RFC 03/10] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   E Shattow
• [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   E Shattow
• [RFC 05/10] eeprom: starfive: Update eeprom data format version to 3   E Shattow
• [RFC 06/10] pcie: starfive: Add a optional power gpio support   E Shattow
• [RFC 07/10] riscv: dts: jh7110: Add StarFive VisionFive 2 Lite u-boot device tree   E Shattow
• [RFC 08/10] configs: visionfive2: Add VisionFive 2 Lite DT to OF_LIST   E Shattow
• [RFC 09/10] board: starfive: spl: Support VisionFive 2 Lite   E Shattow
• [RFC 10/10] board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection   E Shattow
• [PATCH v1] board: starfive: visionfive2: deprecate mixed-case product ids VF7110a VF7110b   E Shattow
• [PATCH v2] scripts/Makefile.lib: increase detail for dtsi debug output   E Shattow
• [PATCH v2 0/4] riscv: dts: starfive: prune redundant jh7110-common overrides   E Shattow
• [PATCH v2 1/4] riscv: dts: starfive: prune redundant jh7110-common overrides   E Shattow
• [PATCH v2 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next   E Shattow
• [PATCH v2 3/4] riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi inclusion   E Shattow
• [PATCH v2 4/4] riscv: dts: starfive: visionfive2 depend on SYS_CONFIG_NAME automatic dtsi inclusion   E Shattow
• [PATCH] board: rockchip: add Lunzn FastRhino R66S   Tianling Shen
• [PATCH 00/12] arm64: zynqmp: DT synchronization   Michal Simek
• [PATCH 01/12] arm64: zynqmp: Disable coresight by default   Michal Simek
• [PATCH 02/12] arm64: zynqmp: Remove undocumented arasan, has-mdma property   Michal Simek
• [PATCH 03/12] arm64: zynqmp: Remove RTC calibration from sm-k26   Michal Simek
• [PATCH 04/12] arm64: zynqmp: Remove "ti,tps53679" property   Michal Simek
• [PATCH 05/12] arm64: xilinx: Add i2c mux idle disconnect property   Michal Simek
• [PATCH 06/12] arm64: zynqmp: Revert usb node drive strength and slew rate for zcu106   Michal Simek
• [PATCH 07/12] arm64: zynqmp: Fix incomplete comment in zynqmp-sc-vn-p-b2197-00-revA.dtso   Michal Simek
• [PATCH 08/12] arm64: zynqmp: Enable PSCI 1.0   Michal Simek
• [PATCH 09/12] arm64: zynqmp: Update compatible string for tps546X24   Michal Simek
• [PATCH 10/12] arm64: zynqmp: Introduce DP port labels   Michal Simek
• [PATCH 11/12] arm64: zynqmp: Enable DP for kr260, kv260, zcu100, zcu102, zcu104, zcu111   Michal Simek
• [PATCH 12/12] arm64: zynqmp: Add pmw_fan label to k26   Michal Simek
• [PATCH v2 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Michal Simek
• [PATCH v2 1/4] clang-format: Add configuration file   Michal Simek
• [PATCH] drivers: net: Add versal2 10GBE device support   Michal Simek
• [PATCH 1/3] clk: xilinx: Call generic smc_call_handler()   Michal Simek
• [PATCH] pwm: cadence-ttc: Insufficient elements in array   Michal Simek
• [PATCH v4 00/10] riscv: Add support for P8700 platform on Boston board   Uros Stajic
• [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Heiko Thiery
• [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Heiko Thiery
• [PATCH v1 v2 0/4] Modernize U-Boot code formatting with clang-format   Javier Tia
• [PATCH v1 v2 1/4] clang-format: Add configuration file   Javier Tia
• [PATCH v1 v2 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Javier Tia
• [PATCH v1 v2 3/4] Lindent: Remove wrapper around indent tool   Javier Tia
• [PATCH v1 v2 4/4] doc: Update U-Boot coding style guide with clang-format usage   Javier Tia
• [PATCH v4] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
• [PATCH v2 0/4] Modernize U-Boot code formatting with clang-format   Javier Tia
• [PATCH v2 1/4] clang-format: Add configuration file   Javier Tia
• [PATCH v2 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Javier Tia
• [PATCH v2 3/4] Lindent: Remove wrapper around indent tool   Javier Tia
• [PATCH v2 4/4] doc: Update U-Boot coding style guide with clang-format usage   Javier Tia
• [PATCH v2 1/4] clang-format: Add configuration file   Javier Tia
• [PATCH v5] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
• [PATCH v3 0/4] Modernize U-Boot code formatting with clang-format   Javier Tia
• [PATCH v3 1/4] clang-format: Add configuration file   Javier Tia
• [PATCH v3 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Javier Tia
• [PATCH v3 3/4] Lindent: Remove wrapper around indent tool   Javier Tia
• [PATCH v3 4/4] doc: Update U-Boot coding style guide with clang-format usage   Javier Tia
• [PATCH 3/3] cmd: mtd: add nand_read_test command support   Michael Nazzareno Trimarchi
• [PATCH] phy: Reset init count on phy exit failure   Siddharth Vadapalli
• [PATCH] phy: Reset init count on phy exit failure   Siddharth Vadapalli
• [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Siddharth Vadapalli
• [PATCH] configs: j7200_evm_a72_defconfig: Enable DP83867 Ethernet PHY   Siddharth Vadapalli
• [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Marek Vasut
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Marek Vasut
• [PATCH] mkimage: Add support for bundling TFA BL31 in mkimage -f auto   Marek Vasut
• [PATCH v2] pinctrl: rzg2l: Variable may not have been assigned to   Marek Vasut
• [PATCH 1/7] usb: dwc3: Tighten driver glue dependencies   Marek Vasut
• [PATCH 2/7] usb: gadget: Tighten requirements on USB_GADGET_ATMEL_USBA   Marek Vasut
• [PATCH 3/7] usb: gadget: bcm_udc_otg: Remove unused driver   Marek Vasut
• [PATCH 4/7] usb: gadget: max3420_udc: Remove unused driver   Marek Vasut
• [PATCH 5/7] usb: host: Tighten USB host driver dependencies   Marek Vasut
• [PATCH 6/7] usb: host: Tighten USB musb-new host glue driver dependencies   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH] env: Remove usb_ignorelist and env_fdt_path from ifdef CONFIG_ENV_VARS_UBOOT_CONFIG   Marek Vasut
• [PATCH] arm64: renesas: r8a779g3: Use $loadaddr in bootcmd on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
• [PATCH] ARM: renesas: Enable CONFIG_ENV_VARS_UBOOT_CONFIG on all boards   Marek Vasut
• [PATCH v3 1/5] Image size checks: Move all configs in one place   Marek Vasut
• [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Marek Vasut
• [PATCH v3 3/5] Image size checks: Use consistent help texts   Marek Vasut
• [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Marek Vasut
• [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Marek Vasut
• [PATCH v2] env: Remove usb_ignorelist and env_fdt_path from ifdef CONFIG_ENV_VARS_UBOOT_CONFIG   Marek Vasut
• [PATCH v2] env: Fix up indent   Marek Vasut
• [PATCH v3 1/5] Image size checks: Move all configs in one place   Marek Vasut
• [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Marek Vasut
• [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Marek Vasut
• [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Marek Vasut
• [PATCH] thermal: sandbox: Staticize sandbox_thermal_get_temp()   Marek Vasut
• [PATCH] thermal: Sort the Makefile   Marek Vasut
• [PATCH 1/2] thermal: rcar_gen3: Add Renesas R-Car Gen3/Gen4 and RZ/G2 thermal driver   Marek Vasut
• [PATCH 2/2] arm64: renesas: Enable thermal driver on R-Car Gen3 and Gen4   Marek Vasut
• [PATCH] thermal: Convert .get_temp() return value to millicelsius   Marek Vasut
• [PATCH] clk: stm32: Pass udevice pointer to clk_register_composite()   Marek Vasut
• [PATCH] phy: Reset init count on phy exit failure   Marek Vasut
• [PATCH] net: dwc_eth_qos: Fix support for stm32mp2 platform   Marek Vasut
• [PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()   Marek Vasut
• [PATCH 2/2] board: dhelectronics: Use isascii() before isprint() in dh_read_eeprom_id_page()   Marek Vasut
• [PATCH] phy: Reset init count on phy exit failure   Marek Vasut
• [PATCH] serial: sh: Handle HSCIF RX FIFO overflow   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Marek Vasut
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Marek Vasut
• [PATCH] thermal: Convert .get_temp() return value to millicelsius   Marek Vasut
• [PATCH] boot: Increase kernel size limit to 128 MiB on ARM64/PPC/RV   Marek Vasut
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Marek Vasut
• [PATCH] env: spi: Fix gd->env_valid for the first write   Marek Vasut
• [PATCH v2 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Marek Vasut
• [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Lothar Waßmann
• [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Lothar Waßmann
• [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Lothar Waßmann
• [PATCH v2 0/3] Support SMP on RISC-V cores with Zalrsc only   Yao Zi
• [PATCH v2 1/3] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Yao Zi
• [PATCH v2 2/3] configs: ibex-ast2700: Explicitly disable Zaamo and Zalrsc extension   Yao Zi
• [PATCH v2 3/3] riscv: Add a Zalrsc-only alternative for synchronization in start.S   Yao Zi
• [PATCH v2 0/3] Add Agilex Clock Enable/Disable API Support   alif.zakuan.yuslaimi at altera.com
• [PATCH v2 1/3] include: dt-bindings: clk: agilex: Add Agilex clock definitions header file   alif.zakuan.yuslaimi at altera.com
• [PATCH v2 2/3] drivers: clk: agilex: Support for enable/disable API   alif.zakuan.yuslaimi at altera.com
• [PATCH v2 3/3] mmc: socfpga_dw_mmc: Enable/disable SDMMC clock via API   alif.zakuan.yuslaimi at altera.com
• [PATCH] cmd/dma: implement dmareset command   briansune
• [PATCH] arm64: Properly clear BSS   brock.zheng
• [PATCH] Fix detection of odd memory configurations on sunxi   Jernej Škrabec

Last message date: Tue Sep 9 07:58:23 CEST 2025
Archived on: Tue Sep 9 07:58:32 CEST 2025

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...