[PATCH 00/10] Enable USB and ENETC on i.MX943 EVK

[Alice Guo (OSS)]

Changes for v1:
 - Adding USB2 and USB3 device tree nodes with required PHY and
   regulator support.
 - Enabling ENETC1 and ENETC2.
 - Updating Kconfig and DTSI files to support these interfaces.

This series depends on "imx: add i.MX94 support".

Signed-off-by: Alice Guo <alice.guo at nxp.com>
---
Alice Guo (6):
      usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95
      arm: arch-imx9: Add USB2.0 and USB3.0 base address definitions
      imx943_evk: Enable USB 2.0 controller host mode
      phy: imx8mq-usb: Add SPL support for i.MX8MQ, i.MX8MP, i.MX95, and i.MX94 USB3.0 PHY
      imx943_evk: Add support for booting from USB SDP on USB3.0
      imx943_evk: Enable ENETC1 and ENETC2

Frank Li (1):
      Add serial# for SPL SDP download

Ye Li (3):
      usb: f_sdp: Update SDP driver to support PQC container
      net: fsl_enetc: Add i.MX94 support to NETC block control driver
      net: fsl_enetc_mdio: Add support for phy-supply property

 arch/arm/dts/imx943-evk-u-boot.dtsi       | 182 ++++++++++++++++
 arch/arm/dts/imx943-u-boot.dtsi           | 234 +++++++++++++++++++++
 arch/arm/include/asm/arch-imx9/imx-regs.h |   5 +
 arch/arm/mach-imx/spl.c                   |  10 +
 configs/imx943_evk_defconfig              |  30 +++
 drivers/net/Kconfig                       |   5 +-
 drivers/net/fsl_enetc_mdio.c              |  25 +++
 drivers/net/fsl_enetc_netc_blk_ctrl.c     | 338 +++++++++++++++++++++++++++++-
 drivers/phy/Kconfig                       |  14 +-
 drivers/phy/Makefile                      |   2 +-
 drivers/usb/gadget/f_sdp.c                |   2 +-
 drivers/usb/host/Kconfig                  |   6 +-
 12 files changed, 835 insertions(+), 18 deletions(-)
---
base-commit: a82d2da84090eb64cf6f8270ec93380641f32867
change-id: 20250923-usbnetc-62095b487e9a

Best regards,
-- 
Alice Guo <alice.guo at oss.nxp.com>