September 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Sep 1 00:25:01 CEST 2025
Ending: Tue Sep 30 20:44:49 CEST 2025
Messages: 1834

• [PATCH] cmd/dma: implement dmareset command   briansune
  • [PATCH] cmd/dma: implement dmareset command   Tom Rini
• [PATCH v2 1/2] power: Correct dependencies on POWER_LEGACY   Tom Rini
• [PATCH] power: Tighten some power driver dependencies   Tom Rini
• [PATCH 0/2] power: Address two Smatch reported issues   Tom Rini
• (subset) [PATCH 0/6] power: regulator: Fix some Smatch reported issues   Tom Rini
• [PATCH] test: Update logic for video test   Tom Rini
• [PATCH] airoha: rework RAM size handling to support multiple RAM size   Weijie Gao (高惟杰)
  • [PATCH] airoha: rework RAM size handling to support multiple RAM size   Mikhail Kshevetskiy
• [PATCH v1] [v1] scripts/Makefile.lib: increase detail for dtsi debug output   E Shattow
• [GIT PULL] Please pull mmc-power-next-2025-09-01   Peng Fan
  • [GIT PULL] Please pull mmc-power-next-2025-09-01   Frieder Schrempf
    • [GIT PULL] Please pull mmc-power-next-2025-09-01   Tom Rini
      • [GIT PULL] Please pull mmc-power-next-2025-09-01   Frieder Schrempf
  • [GIT PULL] Please pull mmc-power-next-2025-09-01   Tom Rini
• [PATCH] cmd: Remove default prompt from output   Heiko Schocher
• [PATCH] tools: Drop meaningless comment from Makefile   Heiko Schocher
  • [PATCH] tools: Drop meaningless comment from Makefile   Tom Rini
• [PATCH v1 4/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Max Merchel
• [PATCH v2 0/4] AM57 boot fixes   Anurag Dutta
  • [PATCH v2 1/4] include: env: ti: Use .env for environment variables   Anurag Dutta
  • [PATCH v2 2/4] board: ti: am57xx: Change to using .env   Anurag Dutta
  • [PATCH v2 3/4] board: ti: am57xx: Set fdtfile from C code instead of findfdt script   Anurag Dutta
  • [PATCH v2 4/4] board: ti: dra7xx: Set fdtfile from C code instead of findfdt script   Anurag Dutta
  • [PATCH v2 0/4] AM57 boot fixes   Tom Rini
    • [PATCH v2 0/4] AM57 boot fixes   Dutta, Anurag
  • [PATCH v2 0/4] AM57 boot fixes   Tom Rini
• [PATCH] net: introduce CONFIG_DNS   Jerome Forissier
  • [PATCH] net: introduce CONFIG_DNS   E Shattow
• [PATCH] mmc: iproc_sdhci: Cannot test unsigned variable for negative   Peng Fan (OSS)
• [PATCH] mmc: core: drop space before newline in trace printf   Peng Fan (OSS)
• [PATCH 0/6] Use correct LDO5 control registers for PCA9450   Peng Fan (OSS)
• [PATCH 00/11] power: update compatibles for PMICs used by exynos devices   Peng Fan (OSS)
• [PATCH v3 1/2] power: pmic: pca9450: Add support for system reset   Peng Fan (OSS)
• [PATCH 3/4] phy: qcom-qmp-ufs: Import SM7150 tables from Linux   Neil Armstrong
• [PATCH 1/2] ufs: Add support for sending UFS attribute requests   Neil Armstrong
• [PATCH v1] pcie: starfive: Fix the incorrect use of dev_err()   Hal Feng
• [PATCH v2] pcie: starfive: Remove the redundant print of probe success   Hal Feng
  • [PATCH v2] pcie: starfive: Remove the redundant print of probe success   Leo Liang
• [PATCH v1 0/2] Tegra20: sl101: fix Hall sensor behavior   Svyatoslav Ryhel
  • [PATCH v1 1/2] ARM: tegra20: transformer: fix Hall sensor behavior   Svyatoslav Ryhel
  • [PATCH v1 2/2] board: transformer-t20: add separate env for SL101   Svyatoslav Ryhel
• [PATCH] clk: exynos: Fix always true test   Minkyu Kang
• [PATCH 00/10] samsung: e850-96: Enable USB host and Ethernet   Minkyu Kang
• [PATCH 0/3] ARM: exynos: fix origen description and align and add \n to pinmux msgs   Minkyu Kang
• [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Philip Oberfichtner
  • [PATCH v2 1/3] Image size checks: Remove HAS_BOARD_SIZE_LIMIT   Marek Vasut
• [PATCH v2] scripts/Makefile.lib: increase detail for dtsi debug output   E Shattow
  • [PATCH v2] scripts/Makefile.lib: increase detail for dtsi debug output   E Shattow
• [PATCH v3] disk: efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• [PATCH 0/8] imx: add i.MX94 support   Alice Guo (OSS)
  • [PATCH v1 1/8] imx9: Add i.MX94 CPU type and SoC-level Kconfig   Alice Guo (OSS)
  • [PATCH v1 2/8] imx95: Add get_reset_reason() to retrieve the LM/system last booted/shutdown reasons   Alice Guo (OSS)
  • [PATCH v1 3/8] imx9: scmi: Add i.MX94 support to get_reset_reason()   Alice Guo (OSS)
  • [PATCH v1 4/8] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   Alice Guo (OSS)
    • [PATCH v1 4/8] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   E Shattow
      • 回复: [EXT] Re: [PATCH v1 4/8] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   Alice Guo (OSS)
      • [EXT] Re: [PATCH v1 4/8] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   Fabio Estevam
      • [EXT] Re: [PATCH v1 4/8] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   Tom Rini
      • 回复: [EXT] Re: [PATCH v1 4/8] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   Alice Guo (OSS)
  • [PATCH v1 5/8] imx: container: Add i.MX94 support to get_imageset_end()   Alice Guo (OSS)
  • [PATCH v1 6/8] imx: ele_ahab: Implement display_life_cycle() for i.MX95   Alice Guo (OSS)
  • [PATCH v1 7/8] imx: ele_ahab: Add i.MX94 support to display_life_cycle()   Alice Guo (OSS)
  • [PATCH v1 8/8] pinctrl: nxp: Add i.MX94 daisy register offset   Alice Guo (OSS)
• [PATCH v1] configs: starfive: Add visionfive2 CONFIG_DNS enabled   E Shattow
  • [PATCH v1] configs: starfive: Add visionfive2 CONFIG_DNS enabled   Tom Rini
• [PATCH 4/8] tools: rkcommon: Mark rkcommon_is_header_v2() as static   Quentin Schulz
• [PATCH v1] clk: Only enable the parent clock if the clock was enabled before reparenting   Miquel Raynal
• [PATCH] mmc: core: style fixes in mmc.c   Bhimeswararao Matsa
  • [PATCH] mmc: core: style fixes in mmc.c   Peng Fan
  • [PATCH] mmc: core: style fixes in mmc.c   Peng Fan (OSS)
• [PATCH] board: ti: fdt_ops: make ti_set_fdt_env() const-correct   Bhimeswararao Matsa
  • [PATCH] board: ti: fdt_ops: make ti_set_fdt_env() const-correct   Tom Rini
• [PATCH] power: regulator: Fix incorrect use of binary and   Andrew Goodbody
• [PATCH v2] power: regulator: Fix incorrect use of binary and   Andrew Goodbody
  • [PATCH v2] power: regulator: Fix incorrect use of binary and   Peng Fan
  • [PATCH v2] power: regulator: Fix incorrect use of binary and   Peng Fan (OSS)
• [PATCH] spi: exynos: Remove extra term from test   Andrew Goodbody
• [PATCH v2] spi: exynos: Remove extra term from test   Andrew Goodbody
  • [PATCH v2] spi: exynos: Remove extra term from test   Minkyu Kang
• [PATCH 1/1] bloblist: use correct types for physical addresses   Heinrich Schuchardt
  • [PATCH 1/1] bloblist: use correct types for physical addresses   Ilias Apalodimas
  • [PATCH 1/1] bloblist: use correct types for physical addresses   Tom Rini
• [MASTER] Pull request efi-2025-10-rc4   Tom Rini
• [PATCH 1/2] ti: Do not try to read the mac address if no NET is enabled   Maarten Brock
  • [PATCH 1/2] ti: Do not try to read the mac address if no NET is enabled   Tom Rini
    • [PATCH 1/2] ti: Do not try to read the mac address if no NET is enabled   Maarten Brock
• [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Maarten Brock
  • [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Tom Rini
    • [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Maarten Brock
      • [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Tom Rini
      • [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Maarten Brock
      • [PATCH 2/2] ti: Do not remove ft_board_setup for CONFIG_NO_NET   Tom Rini
• [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Andrew Goodbody
  • [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Frieder Schrempf
    • [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Andrew Goodbody
      • [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Tom Rini
      • [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Andrew Goodbody
      • [PATCH 5/6] power: regulator: tps65910: Cannot test unsigned for being negative   Peng Fan
• Smatch report for Cadence PWM   Andrew Goodbody
• [PATCH] pwm: cadence-ttc: Insufficient elements in array   Andrew Goodbody
  • [PATCH] pwm: cadence-ttc: Insufficient elements in array   Michal Simek
• [PATCH] bloblist: adjust default bloblist size after reloc   Heinrich Schuchardt
  • [PATCH] bloblist: adjust default bloblist size after reloc   Ilias Apalodimas
  • [PATCH] bloblist: adjust default bloblist size after reloc   Tom Rini
• [PATCH v1 v2 0/4] Modernize U-Boot code formatting with clang-format   Javier Tia
  • [PATCH v1 v2 1/4] clang-format: Add configuration file   Javier Tia
  • [PATCH v1 v2 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Javier Tia
  • [PATCH v1 v2 3/4] Lindent: Remove wrapper around indent tool   Javier Tia
  • [PATCH v1 v2 4/4] doc: Update U-Boot coding style guide with clang-format usage   Javier Tia
• [PATCH v2] pinctrl: rzg2l: Variable may not have been assigned to   Paul Barker
  • [PATCH v2] pinctrl: rzg2l: Variable may not have been assigned to   Marek Vasut
• Pull request: u-boot-rockchip-20250831   Tom Rini
• [TESTHOOKS PATCH 1/1] travis-ci: add qemu-riscv64_smode* test environments   Heinrich Schuchardt
  • [TESTHOOKS PATCH 1/1] travis-ci: add qemu-riscv64_smode* test environments   Tom Rini
• [PATCH v3] net: xgmac: Augment mdio read/write with cl-45 format support   Ng, Boon Khai
• [PATCH v1] board: ti: common: Kconfig: add CMD_MEMINFO   Anshul Dalal
  • [PATCH v1] board: ti: common: Kconfig: add CMD_MEMINFO   Tom Rini
• [PATCH] doc: add README.pmic guide for PMIC/regulator framework   Bhimeswararao Matsa
  • [PATCH] doc: add README.pmic guide for PMIC/regulator framework   Quentin Schulz
• [PATCH v3] Add imx8mp-libra-fpsc board   Yannic Moog
  • [PATCH v3] Add imx8mp-libra-fpsc board   Yannic Moog
• [RFC PATCH 0/5] Add initial support for AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH 1/5] board: ti: Introduce the basic files needed to support am62d   Paresh Bhagat
  • [RFC PATCH 2/5] board: ti: am62dx: Add board configs for am62d   Paresh Bhagat
  • [RFC PATCH 3/5] configs: Introduce configs for the AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH 4/5] arch: mach-k3: Introduce support for AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH 5/5] arm: dts: Introduce AM62D2-EVM dtbs   Paresh Bhagat
    • [RFC PATCH 5/5] arm: dts: Introduce AM62D2-EVM dtbs   Andrew Davis
      • [RFC PATCH 5/5] arm: dts: Introduce AM62D2-EVM dtbs   Paresh Bhagat
  • [RFC PATCH 0/5] Add initial support for AM62D2-EVM   Raghavendra, Vignesh
    • [RFC PATCH 0/5] Add initial support for AM62D2-EVM   Paresh Bhagat
• [PATCH v4] Add imx8mp-libra-fpsc board   Yannic Moog
  • [PATCH v4] Add imx8mp-libra-fpsc board   Fabio Estevam
• [PATCH] arm64: Properly clear BSS   Ilias Apalodimas
  • [PATCH] arm64: Properly clear BSS   brock.zheng
    • [PATCH] arm64: Properly clear BSS   Ilias Apalodimas
  • [PATCH] arm64: Properly clear BSS   Tom Rini
• [PATCH v2 0/3] Hyperflash boot fixes for j721e   Anurag Dutta
  • [PATCH v2 1/3] mtd: Kconfig: Add SPL_MUX_MMIO dependency to HBMC driver   Anurag Dutta
  • [PATCH v2 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Anurag Dutta
    • [PATCH v2 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
  • [PATCH v2 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Anurag Dutta
    • [PATCH v2 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Kumar, Udit
• [RFC 05/10] eeprom: starfive: Update eeprom data format version to 3   Hal Feng
  • [RFC 05/10] eeprom: starfive: Update eeprom data format version to 3   E Shattow
• [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
  • [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
    • [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
      • [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Fabio Estevam
      • [PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
• [PATCH v2 2/2] doc: phytec: update imx8m docs for optee builds   Teresa Remmet
  • [PATCH v2 2/2] doc: phytec: update imx8m docs for optee builds   Yannic Moog
• [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   Hal Feng
  • [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   E Shattow
    • [RFC 04/10] eeprom: starfive: Correct get_pcb_revision_from_eeprom()   Heinrich Schuchardt
• [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
  • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Marek Vasut
    • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
      • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
      • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Marek Vasut
      • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
      • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Marek Vasut
      • [PATCH 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Ravulapalli, Naresh Kumar
• [PATCH v2] drivers: clk: agilex: Correct EMAC clock source selection   Ravulapalli, Naresh Kumar
• [PATCH v2 0/3] Support SMP on RISC-V cores with Zalrsc only   Yao Zi
  • [PATCH v2 1/3] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Yao Zi
    • [PATCH v2 1/3] riscv: Add Kconfig options to distinguish Zaamo and Zalrsc   Leo Liang
  • [PATCH v2 2/3] configs: ibex-ast2700: Explicitly disable Zaamo and Zalrsc extension   Yao Zi
    • [PATCH v2 2/3] configs: ibex-ast2700: Explicitly disable Zaamo and Zalrsc extension   Leo Liang
  • [PATCH v2 3/3] riscv: Add a Zalrsc-only alternative for synchronization in start.S   Yao Zi
    • [PATCH v2 3/3] riscv: Add a Zalrsc-only alternative for synchronization in start.S   Leo Liang
• [PATCH 00/12] arm64: zynqmp: DT synchronization   Michal Simek
  • [PATCH 01/12] arm64: zynqmp: Disable coresight by default   Michal Simek
  • [PATCH 02/12] arm64: zynqmp: Remove undocumented arasan, has-mdma property   Michal Simek
  • [PATCH 03/12] arm64: zynqmp: Remove RTC calibration from sm-k26   Michal Simek
  • [PATCH 04/12] arm64: zynqmp: Remove "ti,tps53679" property   Michal Simek
  • [PATCH 05/12] arm64: xilinx: Add i2c mux idle disconnect property   Michal Simek
  • [PATCH 06/12] arm64: zynqmp: Revert usb node drive strength and slew rate for zcu106   Michal Simek
  • [PATCH 07/12] arm64: zynqmp: Fix incomplete comment in zynqmp-sc-vn-p-b2197-00-revA.dtso   Michal Simek
  • [PATCH 08/12] arm64: zynqmp: Enable PSCI 1.0   Michal Simek
  • [PATCH 09/12] arm64: zynqmp: Update compatible string for tps546X24   Michal Simek
  • [PATCH 10/12] arm64: zynqmp: Introduce DP port labels   Michal Simek
  • [PATCH 11/12] arm64: zynqmp: Enable DP for kr260, kv260, zcu100, zcu102, zcu104, zcu111   Michal Simek
  • [PATCH 12/12] arm64: zynqmp: Add pmw_fan label to k26   Michal Simek
  • [PATCH 00/12] arm64: zynqmp: DT synchronization   Michal Simek
• [PATCH v2 1/1] virtio: blk: support block sizes exceeding 512 bytes   Emil Renner Berthing
  • [PATCH v2 1/1] virtio: blk: support block sizes exceeding 512 bytes   Tom Rini
• [PATCH v2 0/2] Fix dma_addr_t for R5 SPL   Anshul Dalal
  • [PATCH v2 1/2] dma: ti: k3-udma: fix dma_addr_t typecasts   Anshul Dalal
    • [PATCH v2 1/2] dma: ti: k3-udma: fix dma_addr_t typecasts   Prasanth Mantena
  • [PATCH v2 2/2] config: arch: k3: enable DMA_ADDR_T_64BIT   Anshul Dalal
• [PATCH 0/6] Make MPFS Generic   Jamie Gibbons
  • [PATCH 3/6] doc: microchip: introduce common sections   Jamie Gibbons
    • [PATCH 3/6] doc: microchip: introduce common sections   Leo Liang
  • [PATCH 4/6] doc: microchip: add mpfs_video.rst   Jamie Gibbons
    • [PATCH 4/6] doc: microchip: add mpfs_video.rst   Leo Liang
  • [PATCH 5/6] misc: mpfs_syscontroller: add functions to read device tree overlays   Jamie Gibbons
    • [PATCH 5/6] misc: mpfs_syscontroller: add functions to read device tree overlays   Leo Liang
  • [PATCH 6/6] board: microchip: mpfs_generic: include processing of dtbos   Jamie Gibbons
    • [PATCH 6/6] board: microchip: mpfs_generic: include processing of dtbos   Leo Liang
• [PATCH 1/6] board: microchip: icicle: rename all icicle files to generic   Jamie Gibbons
  • [PATCH 1/6] board: microchip: icicle: rename all icicle files to generic   Leo Liang
  • [PATCH 1/6] board: microchip: icicle: rename all icicle files to generic   Leo Liang
• [PATCH 2/6] configs/microchip_mpfs_generic_defconfig: add board   Jamie Gibbons
  • [PATCH 2/6] configs/microchip_mpfs_generic_defconfig: add board   Leo Liang
• [PATCH v3 0/3] Hyperflash boot fixes for j721e   Anurag Dutta
  • [PATCH v3 1/3] mtd: Kconfig: Add SPL_MUX_MMIO dependency to HBMC driver   Anurag Dutta
  • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Anurag Dutta
    • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
    • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Tom Rini
      • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
      • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Tom Rini
      • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
      • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Tom Rini
      • [PATCH v3 2/3] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Kumar, Udit
  • [PATCH v3 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Anurag Dutta
    • [PATCH v3 3/3] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Kumar, Udit
• [RFC 01/10] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts   E Shattow
• [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   E Shattow
  • [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Sumit Garg
    • [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Heinrich Schuchardt
    • [RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree   Hal Feng
• [RFC 03/10] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   E Shattow
  • [RFC 03/10] eeprom: starfive: Simplify get_ddr_size_from_eeprom()   Heinrich Schuchardt
• [PATCH] mkimage: Add support for bundling TFA BL31 in mkimage -f auto   Marek Vasut
  • [PATCH] mkimage: Add support for bundling TFA BL31 in mkimage -f auto   Tom Rini
• [PATCH] sandbox: replace deprecated getenv() with env_get()   Osama Abdelkader
  • [PATCH] sandbox: replace deprecated getenv() with env_get()   Tom Rini
• [PATCH 0/3] memtest performance improvements   Tom Rini
• [RFC 06/10] pcie: starfive: Add a optional power gpio support   E Shattow
• [RFC 07/10] riscv: dts: jh7110: Add StarFive VisionFive 2 Lite u-boot device tree   E Shattow
• [RFC 08/10] configs: visionfive2: Add VisionFive 2 Lite DT to OF_LIST   E Shattow
• [RFC 09/10] board: starfive: spl: Support VisionFive 2 Lite   E Shattow
• [RFC 10/10] board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection   E Shattow
  • [RFC 10/10] board: starfive: visionfive2: Add VisionFive 2 Lite fdt selection   Heinrich Schuchardt
• [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Adriano Carvalho
  • [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Adriano Carvalho
    • [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Tom Rini
      • [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Adriano Carvalho
      • [PATCH 4/7] doc: make pdfdocs: Ensure SVG files are converted to PDF before the compilation of *.tex files   Tom Rini
• [PATCH 1/7] usb: dwc3: Tighten driver glue dependencies   Marek Vasut
• [PATCH 2/7] usb: gadget: Tighten requirements on USB_GADGET_ATMEL_USBA   Marek Vasut
• [PATCH 3/7] usb: gadget: bcm_udc_otg: Remove unused driver   Marek Vasut
• [PATCH 4/7] usb: gadget: max3420_udc: Remove unused driver   Marek Vasut
• [PATCH 5/7] usb: host: Tighten USB host driver dependencies   Marek Vasut
• [PATCH 6/7] usb: host: Tighten USB musb-new host glue driver dependencies   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
• [PATCH v1] board: starfive: visionfive2: deprecate mixed-case product ids VF7110a VF7110b   E Shattow
  • [PATCH v1] board: starfive: visionfive2: deprecate mixed-case product ids VF7110a VF7110b   Tom Rini
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
  • Please pull u-boot-tegra staging   Tom Rini
• [PATCH] configs: Fix crash on coreboot x86   Patrick Rudolph
  • [PATCH] configs: Fix crash on coreboot x86   Tom Rini
  • [PATCH] configs: Fix crash on coreboot x86   Tom Rini
• [PATCH v3 0/5] Add support for MediaTek MT7987/MT7988 built-in 2.5Gb ethernet PHY (v3)   Weijie Gao
  • [PATCH v3 1/5] misc: fs_loader: allow returning actual firmware data size in request_firmware_into_buf_via_script()   Weijie Gao
  • [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
    • [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Lothar Waßmann
      • [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
      • [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Lothar Waßmann
      • [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
      • [PATCH v3 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Lothar Waßmann
  • [PATCH v3 3/5] net: mediatek: associate PHY device with dts node specified by phy-handle   Weijie Gao
  • [PATCH v3 4/5] net: phy: Add MediaTek built-in 2.5Gb ethernet PHY driver   Weijie Gao
  • [PATCH v3 5/5] MAINTAINERS: update ethernet-related file list for MediaTek ARM platform   Weijie Gao
• [PATCH v3 0/5] Simplify image size checks   Philip Oberfichtner
  • [PATCH v3 1/5] Image size checks: Move all configs in one place   Philip Oberfichtner
    • [PATCH v3 1/5] Image size checks: Move all configs in one place   Marek Vasut
      • [PATCH v3 1/5] Image size checks: Move all configs in one place   Philip Oberfichtner
      • [PATCH v3 1/5] Image size checks: Move all configs in one place   Marek Vasut
      • [PATCH v3 1/5] Image size checks: Move all configs in one place   Philip Oberfichtner
      • [PATCH v3 1/5] Image size checks: Move all configs in one place   Tom Rini
  • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
    • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Marek Vasut
      • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
      • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Marek Vasut
      • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
    • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Tom Rini
      • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
      • [PATCH v3 2/5] Image size checks: Use HAS_SIZE_LIMIT consistently   Tom Rini
  • [PATCH v3 3/5] Image size checks: Use consistent help texts   Philip Oberfichtner
    • [PATCH v3 3/5] Image size checks: Use consistent help texts   Marek Vasut
      • [PATCH v3 3/5] Image size checks: Use consistent help texts   Philip Oberfichtner
  • [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Philip Oberfichtner
    • [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Marek Vasut
      • [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Philip Oberfichtner
      • [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Marek Vasut
      • [PATCH v3 4/5] Image size checks: Deduplicate Makefile   Philip Oberfichtner
  • [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Philip Oberfichtner
    • [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Heinrich Schuchardt
    • [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Marek Vasut
      • [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Philip Oberfichtner
      • [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Heinrich Schuchardt
      • [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Marek Vasut
      • [PATCH v3 5/5] Image size checks: Simplify SPL_SIZE_LIMIT logic   Philip Oberfichtner
• [PATCH v1] ARM: amlogic: fix JetHub D1 eth mac fallback generation   Viacheslav Bocharov
• [PATCH v1] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
  • [PATCH v1] mach-k3: fix reading size and addr from fdt on R5   Dhruva Gole
  • [PATCH v1] mach-k3: fix reading size and addr from fdt on R5   Tom Rini
• [PATCH] env: Remove usb_ignorelist and env_fdt_path from ifdef CONFIG_ENV_VARS_UBOOT_CONFIG   Marek Vasut
• [PATCH] arm64: renesas: r8a779g3: Use $loadaddr in bootcmd on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
• [PATCH] ARM: renesas: Enable CONFIG_ENV_VARS_UBOOT_CONFIG on all boards   Marek Vasut
• [PATCH v3 0/2] Fix dma_addr_t for R5 SPL   Anshul Dalal
  • [PATCH v3 1/2] dma: ti: k3-udma: fix dma_addr_t typecasts   Anshul Dalal
  • [PATCH v3 2/2] config: arch: k3: enable DMA_ADDR_T_64BIT   Anshul Dalal
    • [PATCH v3 2/2] config: arch: k3: enable DMA_ADDR_T_64BIT   Prasanth Mantena
  • [PATCH v3 0/2] Fix dma_addr_t for R5 SPL   Tom Rini
• [PATCH v2 0/7] Add display support for STM32MP25   Raphael Gallais-Pou
  • [PATCH v2 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Raphael Gallais-Pou
    • [PATCH v2 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Yannick FERTRE
      • [PATCH v2 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Yannick FERTRE
  • [PATCH v2 2/7] video: simple_panel: add support for "panel-lvds" display   Raphael Gallais-Pou
    • [PATCH v2 2/7] video: simple_panel: add support for "panel-lvds" display   Yannick FERTRE
  • [PATCH v2 3/7] video: stm32: STM32 driver support for LVDS   Raphael Gallais-Pou
    • [PATCH v2 3/7] video: stm32: STM32 driver support for LVDS   Yannick FERTRE
  • [PATCH v2 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Raphael Gallais-Pou
    • [PATCH v2 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Yannick FERTRE
  • [PATCH v2 5/7] video: stm32: ltdc: properly search the first available panel   Raphael Gallais-Pou
    • [PATCH v2 5/7] video: stm32: ltdc: properly search the first available panel   Yannick FERTRE
  • [PATCH v2 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Raphael Gallais-Pou
    • [PATCH v2 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Yannick FERTRE
  • [PATCH v2 7/7] configs: stm32mp25: enable LVDS display support   Raphael Gallais-Pou
    • [PATCH v2 7/7] configs: stm32mp25: enable LVDS display support   Yannick FERTRE
• [PATCH v2] env: Remove usb_ignorelist and env_fdt_path from ifdef CONFIG_ENV_VARS_UBOOT_CONFIG   Marek Vasut
  • [PATCH v2] env: Remove usb_ignorelist and env_fdt_path from ifdef CONFIG_ENV_VARS_UBOOT_CONFIG   Tom Rini
  • [PATCH v2] env: Remove usb_ignorelist and env_fdt_path from ifdef CONFIG_ENV_VARS_UBOOT_CONFIG   Tom Rini
• [PATCH v2] env: Fix up indent   Marek Vasut
  • [PATCH v2] env: Fix up indent   Tom Rini
  • [PATCH v2] env: Fix up indent   Tom Rini
• [PATCH] SUNXI / TWSI: Implement I2C bus unlocking for stuck devices during initialization.   Federico Fuga via B4 Relay
• [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Sidharth Seela
  • [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Sidharth Seela
    • [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Tom Rini
      • [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Sidharth Seela
      • [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Sidharth Seela
      • [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Tom Rini
      • [PATCH v1] doc: board: ti: am335x_evm: Add documentation   Sidharth Seela
• [PATCH v4] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
  • [PATCH v4] disk: efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• [PATCH v2 0/4] Modernize U-Boot code formatting with clang-format   Javier Tia
  • [PATCH v2 1/4] clang-format: Add configuration file   Javier Tia
    • [PATCH v2 1/4] clang-format: Add configuration file   Michal Simek
      • [PATCH v2 1/4] clang-format: Add configuration file   Javier Tia
  • [PATCH v2 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Javier Tia
    • [PATCH v2 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Michal Simek
  • [PATCH v2 3/4] Lindent: Remove wrapper around indent tool   Javier Tia
  • [PATCH v2 4/4] doc: Update U-Boot coding style guide with clang-format usage   Javier Tia
• [PATCH 0/2] Fix ADI driver header dependencies   Greg Malysa
  • [PATCH 1/2] net: dwc_eth_qos_adi: Add missing header   Greg Malysa
  • [PATCH 2/2] mmc: adi_sdhci: Update headers   Greg Malysa
    • [PATCH 2/2] mmc: adi_sdhci: Update headers   Peng Fan
  • [PATCH 0/2] Fix ADI driver header dependencies   Tom Rini
• [PATCH] pwm: meson: Stop premature exit from for loop   Neil Armstrong
  • [PATCH] pwm: meson: Stop premature exit from for loop   Neil Armstrong
• [PATCH] net: mdio: mux-meson-gxl: set reversed bit when using internal phy   Neil Armstrong
• [PATCH v3] pinctrl: meson: support gpio toggle command   Neil Armstrong
• [PATCH] adc: meson-saradc: uint cannot be less than zero   Neil Armstrong
• [PATCH] clk: meson: Remove unreachable code   Neil Armstrong
• [PATCH v3 0/7] Add display support for STM32MP25   Raphael Gallais-Pou
  • [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Raphael Gallais-Pou
  • [PATCH v3 2/7] video: simple_panel: add support for "panel-lvds" display   Raphael Gallais-Pou
  • [PATCH v3 3/7] video: stm32: STM32 driver support for LVDS   Raphael Gallais-Pou
  • [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Raphael Gallais-Pou
    • [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Patrice CHOTARD
      • [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Raphael Gallais-Pou
      • [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Patrice CHOTARD
  • [PATCH v3 5/7] video: stm32: ltdc: properly search the first available panel   Raphael Gallais-Pou
    • [PATCH v3 5/7] video: stm32: ltdc: properly search the first available panel   Patrice CHOTARD
  • [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Raphael Gallais-Pou
    • [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Patrice CHOTARD
  • [PATCH v3 7/7] configs: stm32mp25: enable LVDS display support   Raphael Gallais-Pou
    • [PATCH v3 7/7] configs: stm32mp25: enable LVDS display support   Patrice CHOTARD
• [PATCH 1/4] clk/qcom: add driver for SM7150 GCC   Casey Connolly
• [PATCH 2/4] pinctrl: qcom: add SM7150 pinctrl driver   Casey Connolly
  • [PATCH 2/4] pinctrl: qcom: add SM7150 pinctrl driver   Jens Reidel
    • [PATCH 2/4] pinctrl: qcom: add SM7150 pinctrl driver   Casey Connolly
• [PATCH 4/4] configs: qcom_defconfig: Enable SM7150 GCC and Pinctrl   Casey Connolly
• [PATCH RESEND v5 0/2] cmd: mtd: fix benchmarking   Mikhail Kshevetskiy
  • [PATCH RESEND v5 1/2] cmd: mtd: fix speed measurement in the speed benchmark   Mikhail Kshevetskiy
  • [PATCH RESEND v5 2/2] cmd: mtd: add benchmark option to the help   Mikhail Kshevetskiy
  • [PATCH RESEND v5 0/2] cmd: mtd: fix benchmarking   Mikhail Kshevetskiy
    • [PATCH RESEND v5 1/2] cmd: mtd: fix speed measurement in the speed benchmark   Mikhail Kshevetskiy
    • [PATCH RESEND v5 2/2] cmd: mtd: add benchmark option to the help   Mikhail Kshevetskiy
• [PATCH 0/3] cmd: mtd: improvements   Mikhail Kshevetskiy
  • [PATCH 1/3] cmd: mtd: add markbad command support   Mikhail Kshevetskiy
  • [PATCH 2/3] cmd: mtd: add nand_write_test command support   Mikhail Kshevetskiy
  • [PATCH 3/3] cmd: mtd: add nand_read_test command support   Mikhail Kshevetskiy
    • [PATCH 3/3] cmd: mtd: add nand_read_test command support   Michael Nazzareno Trimarchi
  • [PATCH 0/3] cmd: mtd: improvements   Miquel Raynal
• Re   Head of Group Human Resources
• [PATCH] configs/coreboot_defconfig: Set X86_LOAD_FROM_32_BIT to use own GDT   Benjamin Doron
• [PATCH v2 0/4] riscv: dts: starfive: prune redundant jh7110-common overrides   E Shattow
  • [PATCH v2 1/4] riscv: dts: starfive: prune redundant jh7110-common overrides   E Shattow
  • [PATCH v2 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next   E Shattow
  • [PATCH v2 3/4] riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi inclusion   E Shattow
  • [PATCH v2 4/4] riscv: dts: starfive: visionfive2 depend on SYS_CONFIG_NAME automatic dtsi inclusion   E Shattow
    • [PATCH v2 4/4] riscv: dts: starfive: visionfive2 depend on SYS_CONFIG_NAME automatic dtsi inclusion   E Shattow
• please pull u-boot-samsung master   Minkyu Kang
  • please pull u-boot-samsung master   Tom Rini
• [PATCH -next v6 0/9] Add support for dynamic MMU configuration   Anshul Dalal
  • [PATCH -next v6 01/10] mach-k3: use minimal memory map for all K3   Anshul Dalal
    • [PATCH -next v6 01/10] mach-k3: use minimal memory map for all K3   Dhruva Gole
  • [PATCH -next v6 03/10] arm: armv8: mmu: export mmu_setup   Anshul Dalal
    • [PATCH -next v6 03/10] arm: armv8: mmu: export mmu_setup   Dhruva Gole
    • [PATCH -next v6 03/10] arm: armv8: mmu: export mmu_setup   Ilias Apalodimas
      • [PATCH -next v6 03/10] arm: armv8: mmu: export mmu_setup   Ilias Apalodimas
  • [PATCH -next v6 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
    • [PATCH -next v6 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Dhruva Gole
    • [PATCH -next v6 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Ilias Apalodimas
  • [PATCH -next v6 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
    • [PATCH -next v6 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks   Ilias Apalodimas
      • [PATCH -next v6 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
      • [PATCH -next v6 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks   Ilias Apalodimas
      • [PATCH -next v6 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
  • [PATCH -next v6 06/10] mach-k3: map all banks using mem_map_fix_dram_banks   Anshul Dalal
  • [PATCH -next v6 07/10] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
    • [PATCH -next v6 07/10] arm: armv8: mmu: add mmu_unmap_reserved_mem   Ilias Apalodimas
  • [PATCH -next v6 08/10] spl: split spl_board_fixups to arch/board specific   Anshul Dalal
  • [PATCH -next v6 09/10] mach-k3: add reserved memory fixups for next boot stage   Anshul Dalal
  • [PATCH -next v6 10/10] mach-k3: add carveouts for TFA and optee   Anshul Dalal
    • [PATCH -next v6 10/10] mach-k3: add carveouts for TFA and optee   Bryan Brattlof
      • [PATCH -next v6 10/10] mach-k3: add carveouts for TFA and optee   Anshul Dalal
  • [PATCH -next v6 0/9] Add support for dynamic MMU configuration   Wadim Egorov
• [PATCH -next v6 02/10] mach-k3: use custom enable_cache   Anshul Dalal
  • [PATCH -next v6 02/10] mach-k3: use custom enable_cache   Dhruva Gole
• Call for Participation: Embedded & IoT micro-conference at Linux Plumbers 2025   Jan Lübbe
• [PATCH] crypto/rng: double the entropy delay interval for retry   Gaurav Jain
  • [PATCH] crypto/rng: double the entropy delay interval for retry   Peng Fan
    • [PATCH] crypto/rng: double the entropy delay interval for retry   Gaurav Jain
      • [PATCH] crypto/rng: double the entropy delay interval for retry   Peng Fan
• [PATCH 0/1] Add compatible for ADP5587   Philip Molloy
  • [PATCH 1/1] gpio: adp5588: Add ADP5587 as compatible   Philip Molloy
    • [PATCH 1/1] gpio: adp5588: Add ADP5587 as compatible   Tom Rini
• [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Kory Maincent
  • [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Sidharth Seela
  • [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Sidharth Seela
  • [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Kory Maincent
    • [PATCH v1] board: ti: am33xx: Fix serial_getc comparision in spl_start_uboot()   Sidharth Seela
• [GIT PULL] Please pull u-boot-imx-next-20250905a   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-next-20250905a   Tom Rini
• [PATCH] tools: imx8image: Make imx8image_check_params() static   Fabio Estevam
• [PATCH] arm: dts: imx93-phyboard-segin-u-boot: Clean-up already upstream nodes   Fabio Estevam
• [PATCH 11/11] imx: kontron-sl-mx6ul: Switch to OF_UPSTREAM   Fabio Estevam
• [Upstream] [PATCH 1/2] configs: imx93-phycore_defconfig: Disable CONFIG_AHAB_BOOT   Fabio Estevam
• [PATCH v2] imx8m[m,n,p]_evk: Add redundant environment support   Fabio Estevam
• [PATCH] cmd: terminal: avoid serial_reinit_all() with DM_SERIAL enabled   Aditya Dutt
  • [PATCH] cmd: terminal: avoid serial_reinit_all() with DM_SERIAL enabled   Aditya Dutt
  • [PATCH] cmd: terminal: avoid serial_reinit_all() with DM_SERIAL enabled   Tom Rini
• [PATCH v5] disk: efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
  • [PATCH v5] disk: efi_loader: Improve disk image detection in efi_bootmgr   Ilias Apalodimas
• LWIP buffer alignment   Tim Harvey
  • LWIP buffer alignment   Jerome Forissier
    • LWIP buffer alignment   Tim Harvey
      • LWIP buffer alignment   Jerome Forissier
      • LWIP buffer alignment   Tim Harvey
• [PATCH v5 0/2] Restore support for i.MX95 A0 silicon   Alice Guo (OSS)
  • [PATCH v5 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Alice Guo (OSS)
  • [PATCH v5 2/2] imx95_evk: Restore support for i.MX95 A0 silicon   Alice Guo (OSS)
  • [PATCH v5 0/2] Restore support for i.MX95 A0 silicon   Fabio Estevam
• [PATCH v3 0/4] Modernize U-Boot code formatting with clang-format   Javier Tia
  • [PATCH v3 1/4] clang-format: Add configuration file   Javier Tia
  • [PATCH v3 2/4] tools: zynqmp_psu_init_minimize.sh: Switch to clang-format   Javier Tia
  • [PATCH v3 3/4] Lindent: Remove wrapper around indent tool   Javier Tia
  • [PATCH v3 4/4] doc: Update U-Boot coding style guide with clang-format usage   Javier Tia
  • [PATCH v3 0/4] Modernize U-Boot code formatting with clang-format   Tom Rini
• [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Fabio Estevam
  • 回复: [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Alice Guo (OSS)
    • 回复: [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Tom Rini
      • 回复: 回复: [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Alice Guo (OSS)
      • 回复: 回复: [PATCH v4 1/2] binman: add a new entry type to support .bin file generation for the i.MX95 platform   Tom Rini
• [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Jonas Kvinge
  • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
  • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Oleksii Moisieiev
    • [RFC PATCH v1 00/20] Introduce support for Raspberry PI 5.   Peter Robinson
• No console output on Raspberry Pi Compute Module 5   Jonas Kvinge
  • No console output on Raspberry Pi Compute Module 5   Gijs Peskens
• [PATCH] thermal: sandbox: Staticize sandbox_thermal_get_temp()   Marek Vasut
  • [PATCH] thermal: sandbox: Staticize sandbox_thermal_get_temp()   Tom Rini
• [PATCH] thermal: Sort the Makefile   Marek Vasut
  • [PATCH] thermal: Sort the Makefile   Tom Rini
• [PATCH 1/2] thermal: rcar_gen3: Add Renesas R-Car Gen3/Gen4 and RZ/G2 thermal driver   Marek Vasut
  • [PATCH 2/2] arm64: renesas: Enable thermal driver on R-Car Gen3 and Gen4   Marek Vasut
• [PATCH] thermal: Convert .get_temp() return value to millicelsius   Marek Vasut
  • [PATCH] thermal: Convert .get_temp() return value to millicelsius   Tom Rini
  • [PATCH] thermal: Convert .get_temp() return value to millicelsius   Quentin Schulz
    • [PATCH] thermal: Convert .get_temp() return value to millicelsius   Marek Vasut
  • [PATCH] thermal: Convert .get_temp() return value to millicelsius   David Zang
• [v2 00/12] imx: add i.MX94 support   Alice Guo (OSS)
  • [v2 01/12] imx9: Add i.MX94 CPU type and SoC-level Kconfig   Alice Guo (OSS)
  • [v2 02/12] cpu: imx94: Add support for i.MX94 in get_imx_type_str()   Alice Guo (OSS)
  • [v2 03/12] imx95: Add get_reset_reason() to retrieve the LM/system last booted/shutdown reasons   Alice Guo (OSS)
  • [v2 04/12] imx9: scmi: Add i.MX94 support to get_reset_reason()   Alice Guo (OSS)
  • [v2 05/12] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   Alice Guo (OSS)
  • [v2 06/12] imx: container: Add i.MX94 support to get_imageset_end()   Alice Guo (OSS)
  • [v2 07/12] pinctrl: nxp: Add i.MX94 daisy register offset   Alice Guo (OSS)
  • [v2 08/12] imx9: Change container header temp buffer address   Alice Guo (OSS)
  • [v2 09/12] imx: ele_ahab: Implement display_life_cycle() for i.MX95   Alice Guo (OSS)
  • [v2 10/12] imx: ele_ahab: Add i.MX94 support to display_life_cycle()   Alice Guo (OSS)
  • [v2 11/12] arm: dts: Add i.MX943 EVK board dtsi files   Alice Guo (OSS)
  • [v2 12/12] imx94_evk: Add i.MX943 EVK board support   Alice Guo (OSS)
    • [v2 12/12] imx94_evk: Add i.MX943 EVK board support   Tom Rini
• [PATCH] clk: stm32: Pass udevice pointer to clk_register_composite()   Marek Vasut
  • [PATCH] clk: stm32: Pass udevice pointer to clk_register_composite()   Patrice CHOTARD
    • [PATCH] clk: stm32: Pass udevice pointer to clk_register_composite()   Patrice CHOTARD
• [PATCH] phy: Reset init count on phy exit failure   Marek Vasut
  • [PATCH] phy: Reset init count on phy exit failure   Siddharth Vadapalli
    • [PATCH] phy: Reset init count on phy exit failure   Marek Vasut
      • [PATCH] phy: Reset init count on phy exit failure   Siddharth Vadapalli
  • [PATCH] phy: Reset init count on phy exit failure   Tom Rini
• [PATCH] net: dwc_eth_qos: Fix support for stm32mp2 platform   Marek Vasut
• [PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()   Marek Vasut
  • [PATCH 2/2] board: dhelectronics: Use isascii() before isprint() in dh_read_eeprom_id_page()   Marek Vasut
    • [PATCH 2/2] board: dhelectronics: Use isascii() before isprint() in dh_read_eeprom_id_page()   Christoph Niedermaier
  • [PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()   Christoph Niedermaier
  • [PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()   Tom Rini
    • [PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()   Marek Vasut
      • [PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()   Tom Rini
  • [PATCH 1/2] board: dhelectronics: Check pointer before access in dh_get_value_from_eeprom_buffer()   Tom Rini
• [PATCH RFC 0/9] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
  • [PATCH RFC 2/9] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
  • [PATCH RFC 3/9] mmc: meson_gx_mmc: don't bail if there is no clock driver   Ferass El Hafidi
    • [PATCH RFC 3/9] mmc: meson_gx_mmc: don't bail if there is no clock driver   Neil Armstrong
  • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
    • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Neil Armstrong
    • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Heinrich Schuchardt
      • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
      • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Heinrich Schuchardt
      • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
      • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Simon Glass
      • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
      • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Tom Rini
      • [PATCH RFC 4/9] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
  • [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
    • [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs   Neil Armstrong
      • [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
      • [PATCH RFC 5/9] arm: meson: initial u-boot SPL support for GX SoCs   neil.armstrong at linaro.org
  • [PATCH RFC 6/9] arm: meson: spl: add support for SPL DRAM init   Ferass El Hafidi
    • [PATCH RFC 6/9] arm: meson: spl: add support for SPL DRAM init   Neil Armstrong
  • [PATCH RFC 7/9] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
    • [PATCH RFC 7/9] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Neil Armstrong
  • [PATCH RFC 8/9] board: amlogic: add kconfig fragments for SPL   Ferass El Hafidi
    • [PATCH RFC 8/9] board: amlogic: add kconfig fragments for SPL   Neil Armstrong
  • [PATCH RFC 9/9] doc: board: amlogic: add u-boot-spl documentation   Ferass El Hafidi
    • [PATCH RFC 9/9] doc: board: amlogic: add u-boot-spl documentation   Neil Armstrong
      • [PATCH RFC 9/9] doc: board: amlogic: add u-boot-spl documentation   Heinrich Schuchardt
      • [PATCH RFC 9/9] doc: board: amlogic: add u-boot-spl documentation   Ferass El Hafidi
  • [PATCH RFC 0/9] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
• [PATCH RFC 1/9] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
  • [PATCH RFC 1/9] tools: mkimage: Add Amlogic Boot Image type   Heinrich Schuchardt
    • [PATCH RFC 1/9] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
    • [PATCH RFC 1/9] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
• [PATCH] serial: sh: Handle HSCIF RX FIFO overflow   Marek Vasut
• [PATCH v3 0/3] PHYTEC imx8m boards: enable OP-TEE as default   Yannic Moog
  • [PATCH v3 2/3] doc: phytec: update imx8m docs for optee builds   Yannic Moog
    • [PATCH v3 2/3] doc: phytec: update imx8m docs for optee builds   Teresa Remmet
  • [PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update   Yannic Moog
    • [PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update   Jerome Forissier
      • [PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update   Yannic Moog
      • [PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update   Jerome Forissier
• [PATCH v3 1/3] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
  • [PATCH v3 1/3] phytec-imx8m boards: enable OP-TEE for KASLR   Teresa Remmet
• [PATCH v4 0/5] Add support for MediaTek MT7987/MT7988 built-in 2.5Gb ethernet PHY (v4)   Weijie Gao
  • [PATCH v4 1/5] misc: fs_loader: allow returning actual firmware data size in request_firmware_into_buf_via_script()   Weijie Gao
  • [PATCH v4 2/5] misc: fs_loader: allow using long script name in request_firmware_into_buf_via_script()   Weijie Gao
  • [PATCH v4 3/5] net: mediatek: associate PHY device with dts node specified by phy-handle   Weijie Gao
  • [PATCH v4 4/5] net: phy: Add MediaTek built-in 2.5Gb ethernet PHY driver   Weijie Gao
    • [PATCH v4 4/5] net: phy: Add MediaTek built-in 2.5Gb ethernet PHY driver   Tom Rini
  • [PATCH v4 5/5] MAINTAINERS: update ethernet-related file list for MediaTek ARM platform   Weijie Gao
  • [PATCH v4 0/5] Add support for MediaTek MT7987/MT7988 built-in 2.5Gb ethernet PHY (v4)   Tom Rini
• [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Heiko Thiery
  • [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Siddharth Vadapalli
    • [PATCH] net: ti: am65-cpsw-nuss: invoke phy_config() in driver's .start callback   Heiko Thiery
• [PATCH v2 0/6] Fix UART autoboot issues on DragonBoard 410c   Stephan Gerhold
  • [PATCH v2 1/6] board: dragonboard410c: Drop now unneeded bootph-all for console   Stephan Gerhold
  • [PATCH v2 2/6] Revert "serial: serial_msm: Delay initialization to let pins stabilize"   Stephan Gerhold
  • [PATCH v2 3/6] serial: msm: Cleanup register naming   Stephan Gerhold
  • [PATCH v2 4/6] serial: msm: Reset after writing to DMEN   Stephan Gerhold
  • [PATCH v2 5/6] serial: msm: Re-enable after resetting   Stephan Gerhold
  • [PATCH v2 6/6] serial: msm: Use single character mode   Stephan Gerhold
  • [PATCH v2 0/6] Fix UART autoboot issues on DragonBoard 410c   Sumit Garg
  • [PATCH v2 0/6] Fix UART autoboot issues on DragonBoard 410c   Alexey Minnekhanov
• [PATCH] board: rockchip: add Lunzn FastRhino R66S   Tianling Shen
• [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Stephan Gerhold
  • [PATCH 0/6] usb: host: ehci-msm: Clean up and fix crashes   Marek Vasut
• [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Łukasz Majewski
  • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Svyatoslav Ryhel
    • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Łukasz Majewski
    • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Svyatoslav Ryhel
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Tom Rini
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Svyatoslav Ryhel
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Tom Rini
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Svyatoslav Ryhel
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Francesco Dolcini
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Łukasz Majewski
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Francesco Dolcini
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Łukasz Majewski
      • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Łukasz Majewski
  • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Łukasz Majewski
    • [PATCH 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Svyatoslav Ryhel
• [PATCH] boot: Increase kernel size limit to 128 MiB on ARM64/PPC/RV   Marek Vasut
  • [PATCH] boot: Increase kernel size limit to 128 MiB on ARM64/PPC/RV   Tom Rini
• [PATCH] Fix detection of odd memory configurations on sunxi   Jernej Škrabec
• [PATCH v4 00/10] riscv: Add support for P8700 platform on Boston board   Uros Stajic
  • [PATCH v4 00/10] riscv: Add support for P8700 platform on Boston board   Uros Stajic
• [PATCH v1] MAINTAINERS: Add entry for DesignWare XGMAC driver   Tom Rini
• [ANN] U-Boot v2025.10-rc4 released   Tom Rini
  • [ANN] U-Boot v2025.10-rc4 released   E Shattow
  • [ANN] U-Boot v2025.10-rc4 released   Tom Rini
• [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Kory Maincent
  • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
    • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Tom Rini
      • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
      • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Tom Rini
      • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
      • [PATCH v2] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
  • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
    • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Kory Maincent
      • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Tom Rini
      • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
      • [PATCH 1/1] board: ti: am335x: Do not call disabled PMIC functions   Tom Rini
• [PATCH v1] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   Alice Guo (OSS)
  • [PATCH v1] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   Marek Vasut
    • 回复: [PATCH v1] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   Alice Guo (OSS)
      • Re: 回复: [PATCH v1] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   Marek Vasut
• [PATCH v1] usb: f_sdp: Update SDP driver to support PQC container   Alice Guo (OSS)
• [PATCH v3] imx8: Add ahab_commit command   John Ripple
  • [PATCH v3] imx8: Add ahab_commit command   Peng Fan
    • [PATCH v4] imx8: Add ahab_commit command   John Ripple
  • [PATCH v3] imx8: Add ahab_commit command   Heiko Schocher
  • [PATCH v3] imx8: Add ahab_commit command   Fabio Estevam
  • [PATCH v3] imx8: Add ahab_commit command   Fabio Estevam
• [PATCH v2 0/3] Add Agilex Clock Enable/Disable API Support   alif.zakuan.yuslaimi at altera.com
  • [PATCH v2 1/3] include: dt-bindings: clk: agilex: Add Agilex clock definitions header file   alif.zakuan.yuslaimi at altera.com
    • [PATCH v2 1/3] include: dt-bindings: clk: agilex: Add Agilex clock definitions header file   Chee, Tien Fong
    • [PATCH v2 1/3] include: dt-bindings: clk: agilex: Add Agilex clock definitions header file   Peng Fan
      • [PATCH v2 1/3] include: dt-bindings: clk: agilex: Add Agilex clock definitions header file   Yuslaimi, Alif Zakuan
      • [PATCH v2 1/3] include: dt-bindings: clk: agilex: Add Agilex clock definitions header file   Tom Rini
      • [PATCH v2 1/3] include: dt-bindings: clk: agilex: Add Agilex clock definitions header file   Yuslaimi, Alif Zakuan
  • [PATCH v2 2/3] drivers: clk: agilex: Support for enable/disable API   alif.zakuan.yuslaimi at altera.com
    • [PATCH v2 2/3] drivers: clk: agilex: Support for enable/disable API   Chee, Tien Fong
  • [PATCH v2 3/3] mmc: socfpga_dw_mmc: Enable/disable SDMMC clock via API   alif.zakuan.yuslaimi at altera.com
    • [PATCH v2 3/3] mmc: socfpga_dw_mmc: Enable/disable SDMMC clock via API   Chee, Tien Fong
    • [PATCH v2 3/3] mmc: socfpga_dw_mmc: Enable/disable SDMMC clock via API   Peng Fan
• [PATCH] env: spi: Fix gd->env_valid for the first write   Marek Vasut
  • [PATCH] env: spi: Fix gd->env_valid for the first write   Love Kumar
• [PATCH v2 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Marek Vasut
  • [PATCH v2 1/2] ARM: bootm: Add support for starting Linux through OpTee-OS on ARMv7a   Tom Rini
• [PATCH] configs: j7200_evm_a72_defconfig: Enable DP83867 Ethernet PHY   Siddharth Vadapalli
• [RFC PATCH v2 0/5] Add initial support for AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH v2 1/5] board: ti: Introduce the basic files needed to support am62d   Paresh Bhagat
  • [RFC PATCH v2 2/5] board: ti: am62dx: Add board configs for am62d   Paresh Bhagat
  • [RFC PATCH v2 3/5] arch: mach-k3: Introduce support for AM62D2-EVM   Paresh Bhagat
    • [RFC PATCH v2 3/5] arch: mach-k3: Introduce support for AM62D2-EVM   Andrew Davis
      • [RFC PATCH v2 3/5] arch: mach-k3: Introduce support for AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH v2 4/5] arm: dts: Introduce AM62D2-EVM dtbs   Paresh Bhagat
    • [RFC PATCH v2 4/5] arm: dts: Introduce AM62D2-EVM dtbs   Anshul Dalal
      • [RFC PATCH v2 4/5] arm: dts: Introduce AM62D2-EVM dtbs   Paresh Bhagat
  • [RFC PATCH v2 5/5] configs: Introduce configs for the AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH v2 0/5] Add initial support for AM62D2-EVM   Tom Rini
    • [RFC PATCH v2 0/5] Add initial support for AM62D2-EVM   Paresh Bhagat
• [PATCH] drivers: net: Add versal2 10GBE device support   Michal Simek
• [PATCH 1/3] clk: xilinx: Call generic smc_call_handler()   Michal Simek
• [PATCH -master v1] spl: spi: fix falcon mode for spi boot   Anshul Dalal
  • [PATCH -master v1] spl: spi: fix falcon mode for spi boot   Tom Rini
• [PATCH v3 1/2] clk: scmi: fix set_parent support when CCF is not being used   Dhruva Gole
• [PATCH] mtd: spinor: winbond: Describe several chips   Miquel Raynal
• [PATCH] mtd: spi-nor: winbond: Make sure w25q{01,02}jv behave correctly   Miquel Raynal
  • [PATCH] mtd: spi-nor: winbond: Make sure w25q{01, 02}jv behave correctly   Jagan Teki
    • [PATCH] mtd: spi-nor: winbond: Make sure w25q{01,02}jv behave correctly   Miquel Raynal
    • [PATCH] mtd: spi-nor: winbond: Make sure w25q{01,02}jv behave correctly   Raghavendra, Vignesh
      • [PATCH] mtd: spi-nor: winbond: Make sure w25q{01, 02}jv behave correctly   Michael Nazzareno Trimarchi
• [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Dhruva Gole
  • [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Maxim Kochetkov
  • [PATCH v3 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Maxim Kochetkov
• [PATCH v2] tools: Do not generate logo when cross-building   Jan Kiszka
  • [PATCH v2] tools: Do not generate logo when cross-building   Tom Rini
    • [PATCH v2] tools: Do not generate logo when cross-building   Jan Kiszka
      • [PATCH v2] tools: Do not generate logo when cross-building   Tom Rini
  • [PATCH v2] tools: Do not generate logo when cross-building   Tom Rini
• [PATCH 1/2] configs: phycore_am62ax_r5_defconfig: eMMC boot from raw offsets   Wadim Egorov
  • [PATCH 2/2] configs: phycore_am62ax_a53_defconfig: eMMC boot from raw offsets   Wadim Egorov
    • [PATCH 2/2] configs: phycore_am62ax_a53_defconfig: eMMC boot from raw offsets   Anshul Dalal
  • [PATCH 1/2] configs: phycore_am62ax_r5_defconfig: eMMC boot from raw offsets   Anshul Dalal
  • [PATCH 1/2] configs: phycore_am62ax_r5_defconfig: eMMC boot from raw offsets   Tom Rini
• [PATCH] gpio: mpfs_gpio: fix compilation warnings   Eoin Dickson
  • [PATCH] gpio: mpfs_gpio: fix compilation warnings   Leo Liang
• [PATCH v4 0/3] PHYTEC imx8m boards: enable OP-TEE as default   Yannic Moog
• [PATCH v4 1/3] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
• [PATCH v4 2/3] doc: phytec: update imx8m docs for optee builds   Yannic Moog
• [PATCH v4 3/3] doc: phytec: imx8m: Style and firmware update   Yannic Moog
  • [PATCH v4 3/3] doc: phytec: imx8m: Style and firmware update   Jerome Forissier
    • [PATCH v4 3/3] doc: phytec: imx8m: Style and firmware update   Yannic Moog
• [PATCH] binman: blob_dtb: improve error message when SPL is not found   Tom Rini
  • [PATCH] binman: blob_dtb: improve error message when SPL is not found   Tom Rini
    • [PATCH] binman: blob_dtb: improve error message when SPL is not found   Tom Rini
• [PATCH] drivers: rtc: max313xx: Add delay after setting date   Tom Rini
• [PATCH v2] misc: fs_loader: Initialize actread variable   Tom Rini
• [PATCH] boot: Add LEGACY_IMAGE_FORMAT to DISTRO_DEFAULTS   Tom Rini
• [PATCH] common/spl: use memmove() in load_simple_fit()   Tom Rini
• [PATCH] pci: apple: Fix use of uninitialized variable   Tom Rini
• [PATCH v2] airoha: rework RAM size handling to support multiple RAM size   Christian Marangi
  • [PATCH v2] airoha: rework RAM size handling to support multiple RAM size   Mikhail Kshevetskiy
    • [PATCH v2] airoha: rework RAM size handling to support multiple RAM size   Christian Marangi
      • [PATCH v2] airoha: rework RAM size handling to support multiple RAM size   Mikhail Kshevetskiy
      • [PATCH v2] airoha: rework RAM size handling to support multiple RAM size   Christian Marangi
      • [PATCH v2] airoha: rework RAM size handling to support multiple RAM size   Mikhail Kshevetskiy
• [PATCH 1/8] tools: fdtgrep: Mark util_version() as static   Tom Rini
• [PATCH v1] arm: nuvoton: remove unused parameter   Jim Liu
  • [PATCH v1] arm: nuvoton: remove unused parameter   Tom Rini
• [PATCH] arm: mach-qemu: add support for boot from TF-A.   chalianis1 at gmail.com
  • [PATCH] arm: mach-qemu: add support for boot from TF-A.   Raymond Mao
• [PATCH v3 2/2] board: xilinx: update guid based on metadata   Michal Simek
• [PATCH 1/1] lib: Tidy up comments for vsprintf functions   Heinrich Schuchardt
  • [PATCH 1/1] lib: Tidy up comments for vsprintf functions   Tom Rini
• [PATCH v2] env: spi: Fix gd->env_valid for the first write   Michal Simek
  • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Marek Vasut
    • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Michal Simek
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Michal Simek
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Marek Vasut
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   E Shattow
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Michal Simek
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   E Shattow
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Michal Simek
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   E Shattow
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Michal Simek
      • [PATCH v2] env: spi: Fix gd->env_valid for the first write   Tom Rini
• [PATCH v3] airoha: rework RAM size handling to support multiple RAM size   Christian Marangi
• [PATCH 0/2] qemu-sbsa: Fix GIC enablement   Kunihiko Hayashi
  • [PATCH 1/2] configs: qemu-sbsa: Define GIC register base address   Kunihiko Hayashi
  • [PATCH 2/2] board: qemu-sbsa: Fix mistyped GICV3 definition   Kunihiko Hayashi
  • [PATCH 0/2] qemu-sbsa: Fix GIC enablement   Tom Rini
• [PATCH] ARM: Remove mistyped GICV3 definition from ARCH_SYNQUACER   Kunihiko Hayashi
  • [PATCH] ARM: Remove mistyped GICV3 definition from ARCH_SYNQUACER   Tom Rini
• [RFC 1/1] arm: mach-k3: Rework spl/get_boot_device()   Anshul Dalal
• [PATCH] arm: mach-k3: am625: Unlock MMR registers again   Daniel Schultz
  • [PATCH] arm: mach-k3: am625: Unlock MMR registers again   bb at ti.com
    • [PATCH] arm: mach-k3: am625: Unlock MMR registers again   Sverdlin, Alexander
      • [PATCH] arm: mach-k3: am625: Unlock MMR registers again   bb at ti.com
      • [PATCH] arm: mach-k3: am625: Unlock MMR registers again   Sverdlin, Alexander
      • [PATCH] arm: mach-k3: am625: Unlock MMR registers again   bb at ti.com
      • [PATCH] arm: mach-k3: am625: Unlock MMR registers again   Daniel Schultz
• [PATCH 0/2] arm: mach-k3: am64x: Add reset cause for cpuinfo   Bryan Brattlof
  • [PATCH 0/2] arm: mach-k3: am64x: Add reset cause for cpuinfo   Tom Rini
• [PATCH v2 0/3] Add PCIe boot support on TI AM64X SoC   Bryan Brattlof
  • [PATCH v2 0/3] Add PCIe boot support on TI AM64X SoC   Hrushikesh Salunke
• [PATCH 1/5] ioport: Add resource check helpers   Patrick DELAUNAY
• [PATCH 1/2] vexpress64: Set the DM_RNG property   Debbie Horsfall
  • [PATCH 2/2] arm: vexpress64: Enable SYSRESET and SYSRESET_PSCI   Debbie Horsfall
    • [PATCH 2/2] arm: vexpress64: Enable SYSRESET and SYSRESET_PSCI   Andre Przywara
  • [PATCH 1/2] vexpress64: Set the DM_RNG property   Andre Przywara
• [PATCH 2/5] memory: Add STM32 Octo Memory Manager driver   Patrick DELAUNAY
• [PATCH 4/5] configs: stm32mp25: Enable configs flags related to SPI flashes.   Patrick DELAUNAY
• [PATCH] doc: memory: Restore missing diagram   Tom Rini
  • [PATCH] doc: memory: Restore missing diagram   Neha Malcom Francis
  • [PATCH] doc: memory: Restore missing diagram   Anshul Dalal
    • [PATCH] doc: memory: Restore missing diagram   Tom Rini
• [PATCH 5/5] ARM: dts: Add flash0 partitions for stm32mp257f-ev1-u-boot   Patrick DELAUNAY
• [PATCH 1/2] ARM: stm32mp: fix RIFSC semaphores acquisition   Patrick DELAUNAY
  • [PATCH 1/2] ARM: stm32mp: fix RIFSC semaphores acquisition   Patrice CHOTARD
• [PATCH 2/2] ARM: stm32mp: replace RIFSC check access APIs   Patrick DELAUNAY
  • [PATCH 2/2] ARM: stm32mp: replace RIFSC check access APIs   Patrice CHOTARD
• [PATCH 3/5] spi: Add STM32MP2 Octo-SPI driver support   Patrick DELAUNAY
  • [PATCH 3/5] spi: Add STM32MP2 Octo-SPI driver support   Patrice CHOTARD
• [RFC PATCH 1/2] bootmeth: implement semihosting (smh) boot method   Andre Przywara
  • [RFC PATCH 1/2] bootmeth: implement semihosting (smh) boot method   Sean Anderson
• [RFC PATCH 2/2] vexpress64: replace distro boot with standard boot   Andre Przywara
• [PATCH RFC v2 0/8] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
  • [PATCH RFC v2 1/8] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
  • [PATCH RFC v2 2/8] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
  • [PATCH RFC v2 3/8] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
  • [PATCH RFC v2 4/8] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
  • [PATCH RFC v2 5/8] arm: meson: spl: add support for SPL DRAM init   Ferass El Hafidi
  • [PATCH RFC v2 6/8] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
  • [PATCH RFC v2 7/8] board: amlogic: add kconfig fragments for SPL   Ferass El Hafidi
  • [PATCH RFC v2 8/8] doc: board: amlogic: add u-boot-spl documentation   Ferass El Hafidi
• [PATCH v2] i2c: davinci: drop unnecessary parentheses in REG(&…)   Tom Rini
• [PATCH] fs: ext4fs: Add initialization failure recovery path in ext4fs_write   Tom Rini
• [PATCH] fs: ext4fs: add CONFIG_EXT4_MAX_JOURNAL_ENTRIES to Kconfig   Tom Rini
• [PATCH] checkpatch.pl: Ignore mdelay instead of udelay   Tom Rini
• [PATCH] i2c: davinci: prefer kernel types (u8/u32)   Tom Rini
• [PATCH] board: rockchip: Fix RG353M model renaming   David Barbion
• [PATCH 0/4] General MMC fixes for K3   Judith Mendez
  • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
    • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Kumar, Udit
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Moteen Shah
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
    • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Anshul Dalal
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Andrew Davis
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Anshul Dalal
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Andrew Davis
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
    • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Moteen Shah
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
    • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Wadim Egorov
      • [PATCH 1/4] arm: mach-k3: Fix MMC macros   Judith Mendez
  • [PATCH 3/4] configs: am62px/j722s: Remove non-spl HS400 support at r5 stage   Judith Mendez
    • [PATCH 3/4] configs: am62px/j722s: Remove non-spl HS400 support at r5 stage   Moteen Shah
  • [PATCH 4/4] configs: j722s_evm_a53_defconfig: Disable eMMC HS400   Judith Mendez
    • [PATCH 4/4] configs: j722s_evm_a53_defconfig: Disable eMMC HS400   Kumar, Udit
      • [PATCH 4/4] configs: j722s_evm_a53_defconfig: Disable eMMC HS400   Judith Mendez
      • [PATCH 4/4] configs: j722s_evm_a53_defconfig: Disable eMMC HS400   Kumar, Udit
      • [PATCH 4/4] configs: j722s_evm_a53_defconfig: Disable eMMC HS400   Judith Mendez
    • [PATCH 4/4] configs: j722s_evm_a53_defconfig: Disable eMMC HS400   Moteen Shah
• [PATCH 2/4] configs: am62px_evm_r5_defconfig: Add support eMMC boot config   Judith Mendez
• [PATCH] doc: ext4fs: update documentation for Ext4 Write configuration   Tony Dinh
  • [PATCH] doc: ext4fs: update documentation for Ext4 Write configuration   Tom Rini
• [PATCH v3 0/4] Enable USB 3.1 for Agilex5 SoCFPGA   Naresh Kumar Ravulapalli
  • [PATCH v3 1/4] arch: arm: dts: Enable USB3.1 for Agilex5   Naresh Kumar Ravulapalli
    • [PATCH v3 1/4] arch: arm: dts: Enable USB3.1 for Agilex5   Chee, Tien Fong
  • [PATCH v3 2/4] configs: Enable USB DWC3 host drivers for Agilex5   Naresh Kumar Ravulapalli
  • [PATCH v3 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Naresh Kumar Ravulapalli
  • [PATCH v3 4/4] arch: arm: socfpga: Configure USB3 System Manager registers   Naresh Kumar Ravulapalli
• [PATCH v3 0/2] Fix EMAC clock source selection   Naresh Kumar Ravulapalli
  • [PATCH v3 1/2] drivers: clk: agilex: Fix EMAC clock source selection   Naresh Kumar Ravulapalli
    • [PATCH v3 1/2] drivers: clk: agilex: Fix EMAC clock source selection   Chee, Tien Fong
  • [PATCH v3 2/2] drivers: clk: agilex: Use FIELD_GET during EMAC clock selection   Naresh Kumar Ravulapalli
    • [PATCH v3 2/2] drivers: clk: agilex: Use FIELD_GET during EMAC clock selection   Chee, Tien Fong
• [PATCH v2] mtd: spi: Add ISSI QSPI to lightweight SPI flash stack   Ravulapalli, Naresh Kumar
  • [PATCH v2] mtd: spi: Add ISSI QSPI to lightweight SPI flash stack   Marek Vasut
• [PATCH v2 0/5] stm32mp2: Add SPI flashes support   Patrice Chotard
  • [PATCH v2 3/5] spi: Add STM32MP2 Octo-SPI driver support   Patrice Chotard
  • [PATCH v2 0/5] stm32mp2: Add SPI flashes support   Patrice CHOTARD
• [PATCH v2 1/5] ioport: Add resource check helpers   Patrice Chotard
• [PATCH v2 2/5] memory: Add STM32 Octo Memory Manager driver   Patrice Chotard
• [PATCH v2 4/5] configs: stm32mp25: Enable configs flags related to SPI flashes.   Patrice Chotard
• [PATCH v2 5/5] ARM: dts: Add flash0 partitions for stm32mp257f-ev1-u-boot   Patrice Chotard
• [PATCH] env: fix config dependency for ENV_OFFSET_REDUND_RELATIVE_END   Heiko Thiery
  • [PATCH] env: fix config dependency for ENV_OFFSET_REDUND_RELATIVE_END   Marek Vasut
  • [PATCH] env: fix config dependency for ENV_OFFSET_REDUND_RELATIVE_END   Tom Rini
    • [PATCH] env: fix config dependency for ENV_OFFSET_REDUND_RELATIVE_END   Tom Rini
  • [PATCH] env: fix config dependency for ENV_OFFSET_REDUND_RELATIVE_END   Tom Rini
• [PATCH 0/8] Enable PCIE controller on iMX95 EVK   Ye Li
  • [PATCH 1/8] pci: dw: Fix wrong register used for PCI_COMMAND   Ye Li
  • [PATCH 2/8] pci: pcie_dw_imx: Add iMX9 support to the driver   Ye Li
  • [PATCH 3/8] clk: imx: Add imx95 blkctrl clock driver   Ye Li
  • [PATCH 4/8] power: regulator: Add vin-supply for GPIO and Fixed regulators   Ye Li
  • [PATCH 5/8] clk: clk-uclass: Fix clk_set_default_rates issue   Ye Li
  • [PATCH 6/8] arm: dts: imx95: Assign HSIOPLL_VCO as HSIOPLL parent clock   Ye Li
  • [PATCH 7/8] arm: dts: imx95-evk: set alias for enetc PCI buses   Ye Li
  • [PATCH 8/8] imx95_evk: Enable PCI host controller on iMX95 19x19 EVK   Ye Li
  • [PATCH 0/8] Enable PCIE controller on iMX95 EVK   Fabio Estevam
• [PATCH] bootstd: make it possible to use tftp for netboot with standardboot   Benjamin Hahn
  • [PATCH] bootstd: make it possible to use tftp for netboot with standardboot   Tom Rini
  • [PATCH] bootstd: make it possible to use tftp for netboot with standardboot   Tom Rini
• [RESEND PATCH 0/8] Enable PCIE controller on iMX95 EVK   Ye Li
  • [RESEND PATCH 1/8] pci: dw: Fix wrong register used for PCI_COMMAND   Ye Li
  • [RESEND PATCH 2/8] pci: pcie_dw_imx: Add iMX9 support to the driver   Ye Li
  • [RESEND PATCH 3/8] clk: imx: Add imx95 blkctrl clock driver   Ye Li
  • [RESEND PATCH 4/8] power: regulator: Add vin-supply for GPIO and Fixed regulators   Ye Li
  • [RESEND PATCH 5/8] clk: clk-uclass: Fix clk_set_default_rates issue   Ye Li
  • [RESEND PATCH 6/8] arm: dts: imx95: Assign HSIOPLL_VCO as HSIOPLL parent clock   Ye Li
  • [RESEND PATCH 7/8] arm: dts: imx95-evk: set alias for enetc PCI buses   Ye Li
  • [RESEND PATCH 8/8] imx95_evk: Enable PCI host controller on iMX95 19x19 EVK   Ye Li
• [PATCH RFT v1 00/17] Add support for secure falcon mode   Anshul Dalal
  • [PATCH RFT v1 01/17] spl: Kconfig: add SPL_OS_BOOT_SECURE config symbol   Anshul Dalal
    • [PATCH RFT v1 01/17] spl: Kconfig: add SPL_OS_BOOT_SECURE config symbol   Tom Rini
  • [PATCH RFT v1 02/17] arm: Kconfig: add per device symbols for TI_SECURE   Anshul Dalal
  • [PATCH RFT v1 03/17] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
    • [PATCH RFT v1 03/17] spl: Kconfig: allow K3 devices to use falcon mode   Andrew Davis
  • [PATCH RFT v1 04/17] spl: fat: load kernel image before args in falcon   Anshul Dalal
    • [PATCH RFT v1 04/17] spl: fat: load kernel image before args in falcon   Tom Rini
  • [PATCH RFT v1 05/17] spl: ext: load kernel image before args in falcon   Anshul Dalal
    • [PATCH RFT v1 05/17] spl: ext: load kernel image before args in falcon   Tom Rini
  • [PATCH RFT v1 06/17] spl: mmc: load kernel image before args in falcon   Anshul Dalal
    • [PATCH RFT v1 06/17] spl: mmc: load kernel image before args in falcon   Tom Rini
  • [PATCH RFT v1 07/17] spl: ext, fat: cleanup use of CONFIG_SPL_LIBCOMMON_SUPPORT   Anshul Dalal
    • [PATCH RFT v1 07/17] spl: ext,fat: cleanup use of CONFIG_SPL_LIBCOMMON_SUPPORT   Tom Rini
  • [PATCH RFT v1 08/17] spl: mmc: split spl_mmc_do_fs_boot into regular/os_boot   Anshul Dalal
  • [PATCH RFT v1 09/17] spl: ubi: refactor spl_ubi_load_image for falcon mode   Anshul Dalal
  • [PATCH RFT v1 10/17] spl: spi: refactor spl_spi_load_image for falcon mode   Anshul Dalal
  • [PATCH RFT v1 11/17] spl: nor: refactor spl_nor_load_image for falcon mode   Anshul Dalal
  • [PATCH RFT v1 12/17] spl: nand: refactor spl_nand_load_image for falcon mode   Anshul Dalal
  • [PATCH RFT v1 13/17] spl: falcon: disable fallback to U-Boot on failure   Anshul Dalal
  • [PATCH RFT v1 14/17] spl: falcon: prevent loading args file in secure os boot   Anshul Dalal
    • [PATCH RFT v1 14/17] spl: falcon: prevent loading args file in secure os boot   Tom Rini
  • [PATCH RFT v1 15/17] env: Kconfig: disable external env in secure os boot   Anshul Dalal
    • [PATCH RFT v1 15/17] env: Kconfig: disable external env in secure os boot   Tom Rini
  • [PATCH RFT v1 16/17] Kconfig: disable raw image boot in secure falcon mode   Anshul Dalal
    • [PATCH RFT v1 16/17] Kconfig: disable raw image boot in secure falcon mode   Tom Rini
  • [PATCH RFT v1 17/17] arm: spl: use fdt addr if arg is unset in falcon mode   Anshul Dalal
    • [PATCH RFT v1 17/17] arm: spl: use fdt addr if arg is unset in falcon mode   Tom Rini
• [PATCH] x86: boot: fix unreachable else branch in boot_prep_linux   Guillaume Ranquet
• [PATCH] android: boot: fix wrong end of header in v3/v4 parsing   Guillaume Ranquet
  • [PATCH] android: boot: fix wrong end of header in v3/v4 parsing   Tom Rini
• [PATCH] imx93_frdm: Add support for flashing board with UUU   Tom Rini
  • [PATCH] imx93_frdm: Add support for flashing board with UUU   Mathieu Dubois-Briand
    • [PATCH] imx93_frdm: Add support for flashing board with UUU   Fabio Estevam
      • [PATCH] imx93_frdm: Add support for flashing board with UUU   Mathieu Dubois-Briand
  • [PATCH] imx93_frdm: Add support for flashing board with UUU   Mathieu Dubois-Briand
• [PATCH 1/1] spl: SPL_DM_SPI_FLASH depends on SPL_DM_SPI   Tom Rini
• [PATCH v2] mach-k3: am62*: Fix backup from eMMC boot mode   Tom Rini
• [PATCH] arm: mach-k3: increase max resasg_entries   Tom Rini
• [PATCH] board: ti: am65x: Overwrite get_overlay_mmc   Tom Rini
• [PATCH v2 0/8] USB preparation for "allyesconfig"   Tom Rini
  • [PATCH v2 1/6] usb: dwc3: Tighten driver glue dependencies   Tom Rini
  • [PATCH v2 2/6] usb: gadget: Tighten requirements on USB_GADGET_ATMEL_USBA   Tom Rini
  • [PATCH v2 3/6] usb: gadget: bcm_udc_otg: Remove unused driver   Tom Rini
    • [PATCH v2 3/6] usb: gadget: bcm_udc_otg: Remove unused driver   Marek Vasut
  • [PATCH v2 4/6] usb: gadget: max3420_udc: Remove unused driver   Tom Rini
    • [PATCH v2 4/6] usb: gadget: max3420_udc: Remove unused driver   Marek Vasut
  • [PATCH v2 5/6] usb: host: Tighten USB host driver dependencies   Tom Rini
  • [PATCH v2 6/6] usb: host: Tighten USB musb-new host glue driver dependencies   Tom Rini
• [PATCH v2 0/3] cmd: mtd: improvements   Mikhail Kshevetskiy
  • [PATCH v2 1/3] cmd: mtd: add markbad command support   Mikhail Kshevetskiy
  • [PATCH v2 2/3] cmd: mtd: add nand_write_test command support   Mikhail Kshevetskiy
  • [PATCH v2 3/3] cmd: mtd: add nand_read_test command support   Mikhail Kshevetskiy
• [PATCH] doc: usage: Add File System section and Ext4 documentation   Tony Dinh
  • [PATCH] doc: usage: Add File System section and Ext4 documentation   Anshul Dalal
    • [PATCH] doc: usage: Add File System section and Ext4 documentation   Tony Dinh
• [PATCH v4 0/2] xilinx: Update guid with fwu metadata   Padmarao Begari
  • [PATCH v4 1/2] FWU: Add platform hook support for fwu metata   Padmarao Begari
  • [PATCH v4 2/2] board: xilinx: update guid based on metadata   Padmarao Begari
  • [PATCH v4 0/2] xilinx: Update guid with fwu metadata   Michal Simek
• [PATCH] arm: armv8: Fix spl recover data section broken   Peng Fan
  • [PATCH] arm: armv8: Fix spl recover data section broken   Ye Li
    • [PATCH] arm: armv8: Fix spl recover data section broken   Fabio Estevam
    • [PATCH] arm: armv8: Fix spl recover data section broken   Tom Rini
• [PATCH -next v7 00/10] Add support for dynamic MMU configuration   Anshul Dalal
  • [PATCH -next v7 02/10] mach-k3: use custom enable_cache   Anshul Dalal
  • [PATCH -next v7 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
    • [PATCH -next v7 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Heinrich Schuchardt
      • [PATCH -next v7 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
      • [PATCH -next v7 04/10] arm: armv8: invalidate dcache entries on dcache_enable   Anshul Dalal
  • [PATCH -next v7 05/10] arm: armv8: mmu: add mem_map_fix_dram_banks   Anshul Dalal
  • [PATCH -next v7 06/10] mach-k3: map all banks using mem_map_fix_dram_banks   Anshul Dalal
  • [PATCH -next v7 07/10] arm: armv8: mmu: add mmu_unmap_reserved_mem   Anshul Dalal
  • [PATCH -next v7 08/10] spl: split spl_board_fixups to arch/board specific   Anshul Dalal
  • [PATCH -next v7 09/10] mach-k3: add reserved memory fixups for next boot stage   Anshul Dalal
  • [PATCH -next v7 10/10] mach-k3: add carveouts for TFA and optee   Anshul Dalal
• [PATCH -next v7 01/10] mach-k3: use minimal memory map for all K3   Anshul Dalal
• [PATCH -next v7 03/10] arm: armv8: mmu: export mmu_setup   Anshul Dalal
• [PATCH v2] scripts/Makefile.lib: add CONFIG_SYS_CONFIG_NAME prefix to dtsi search   Tom Rini
  • [PATCH v2] scripts/Makefile.lib: add CONFIG_SYS_CONFIG_NAME prefix to dtsi search   E Shattow
    • [PATCH v2] scripts/Makefile.lib: add CONFIG_SYS_CONFIG_NAME prefix to dtsi search   E Shattow
• [PATCH] Revert "sandbox: replace deprecated getenv() with env_get()"   Tom Rini
  • [PATCH] Revert "sandbox: replace deprecated getenv() with env_get()"   Tom Rini
  • [PATCH] Revert "sandbox: replace deprecated getenv() with env_get()"   Osama Abdelkader
• [PATCH] doc: Remove README.commands.itest   Tom Rini
  • [PATCH] doc: Remove README.commands.itest   Heinrich Schuchardt
• [PATCH] doc: Convert README.commands.spl to rST   Tom Rini
  • [PATCH] doc: Convert README.commands.spl to rST   Heinrich Schuchardt
    • [PATCH] doc: Convert README.commands.spl to rST   Tom Rini
      • [PATCH] doc: Convert README.commands.spl to rST   Heinrich Schuchardt
      • [PATCH] doc: Convert README.commands.spl to rST   Tom Rini
      • [PATCH] doc: Convert README.commands.spl to rST   Heinrich Schuchardt
• [PATCH] rockchip: board: assign up to 3 static Ethernet MAC addresses   MichaIng
• [PATCH] cmd/dma: fix generic naming, spacing, and Dependencies   briansune
  • [PATCH] cmd/dma: fix generic naming, spacing, and Dependencies   Tom Rini
  • [PATCH] cmd/dma: fix generic naming, spacing, and Dependencies   briansune
    • [PATCH] cmd/dma: fix generic naming, spacing, and Dependencies   Quentin Schulz
    • [PATCH v2] cmd/dma: implement dmareset command   briansune
• [PATCH] power: pfuze100: Ensure loop index is incremented   Tom Rini
  • [PATCH] power: pfuze100: Ensure loop index is incremented   Andrew Goodbody
    • [PATCH] power: pfuze100: Ensure loop index is incremented   Tom Rini
      • [PATCH] power: pfuze100: Ensure loop index is incremented   Peng Fan
• [PATCH 1/1] [U-Boot, v4, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
  • [PATCH 1/1] [U-Boot, v4, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
    • [PATCH 1/1] [U-Boot, v4, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
      • [PATCH 1/1] [U-Boot, v4, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
      • [PATCH 1/1] [U-Boot, v4, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
      • [PATCH 1/1] [U-Boot, v4, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
  • [PATCH 1/1] [U-Boot, v4, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
• [PATCH 0/5] Add initial support for Qualcomm SDM670   David Wronek
  • [PATCH 1/5] clk/stub: add sdm670 rpmh clock   David Wronek
    • [PATCH 1/5] clk/stub: add sdm670 rpmh clock   Neil Armstrong
  • [PATCH 3/5] pinctrl: qcom: add sdm670 pinctrl driver   David Wronek
    • [PATCH 3/5] pinctrl: qcom: add sdm670 pinctrl driver   Neil Armstrong
  • [PATCH 4/5] qcom_defconfig: enable pinctrl for sdm670   David Wronek
    • [PATCH 4/5] qcom_defconfig: enable pinctrl for sdm670   Neil Armstrong
• [PATCH 2/5] clk/qcom: sdm845: add support for sdm670   David Wronek
  • [PATCH 2/5] clk/qcom: sdm845: add support for sdm670   Neil Armstrong
• [PATCH 5/5] gpio: qcom_spmi: add pm660l   David Wronek
  • [PATCH 5/5] gpio: qcom_spmi: add pm660l   Neil Armstrong
• [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Aristo Chen
  • [PATCH v2 1/7] binman: Fix typo for the test case name   Aristo Chen
    • [PATCH v2 1/7] binman: Fix typo for the test case name   Dhruva Gole
  • [PATCH v2 2/7] binman: Fix FIT image overlap issues   Aristo Chen
  • [PATCH v2 3/7] binman: Fix FIT image overlap issues for testFitSplitElf   Aristo Chen
  • [PATCH v2 4/7] arm: dts: k3-am6xx: Fix FIT image memory overlap in binman configurations   Aristo Chen
    • [PATCH v2 4/7] arm: dts: k3-am6xx: Fix FIT image memory overlap in binman configurations   Bryan Brattlof
  • [PATCH v2 5/7] tools: mkimage: detect overlapping load regions in FIT configurations   Aristo Chen
  • [PATCH v2 6/7] test: Add test case for FIT image load address overlap detection   Aristo Chen
  • [PATCH v2 7/7] doc: binman: Add guidance for determining ELF load addresses   Aristo Chen
    • [PATCH v2 7/7] doc: binman: Add guidance for determining ELF load addresses   Jonas Karlman
      • [PATCH v2 7/7] doc: binman: Add guidance for determining ELF load addresses   Simon Glass
  • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Tom Rini
    • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Neha Malcom Francis
  • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Nishanth Menon
    • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Nishanth Menon
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   E Shattow
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Tom Rini
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Nishanth Menon
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Aristo Chen
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Aristo Chen
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Bryan Brattlof
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   E Shattow
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Simon Glass
      • [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Aristo Chen
• [PATCH v2] drivers: video: tidss: Refactor tidss_drv   Devarsh Thakkar
• [PATCH v1 1/1] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Lukas Schmid
  • [PATCH v1 1/1] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Andre Przywara
    • [PATCH v1 1/1] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Jernej Škrabec
    • [PATCH v1 1/1] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   András Szemző
    • [PATCH v1 1/1] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Andre Przywara
  • [PATCH v1 1/1] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   John Watts
• [PATCH] qcom_defconfig: Enable pinctrl driver for SDM630/660   Alexey Minnekhanov
  • [PATCH] qcom_defconfig: Enable pinctrl driver for SDM630/660   Neil Armstrong
• [PATCH] sandbox: use env_get() for time offset instead of getenv()   Osama Abdelkader
  • [PATCH] sandbox: use env_get() for time offset instead of getenv()   Tom Rini
• [PATCH] imls: remove return parentheses   Osama Abdelkader
  • [PATCH] imls: remove return parentheses   Tom Rini
• [PATCH v2] doc: usage: Add File System section and Ext4 documentation   Tony Dinh
  • [PATCH v2] doc: usage: Add File System section and Ext4 documentation   Anshul Dalal
• [PATCH] riscv: qemu: Remove fdt_high default   Vivian Wang
  • [PATCH] riscv: qemu: Remove fdt_high default   Tom Rini
    • [PATCH] riscv: qemu: Remove fdt_high default   E Shattow
      • [PATCH] riscv: qemu: Remove fdt_high default   Tom Rini
  • [PATCH] riscv: qemu: Remove fdt_high default   Auer, Lukas
  • [PATCH] riscv: qemu: Remove fdt_high default   Leo Liang
• [PATCH 0/5] stm32mp2: Add SPI flashes support   Marek Vasut
  • [PATCH 0/5] stm32mp2: Add SPI flashes support   Patrice CHOTARD
• [PATCH] ARM: stm32: Perform node compatible check for KS8851 early   Marek Vasut
  • [PATCH] ARM: stm32: Perform node compatible check for KS8851 early   Patrice CHOTARD
    • [PATCH] ARM: stm32: Perform node compatible check for KS8851 early   Patrice CHOTARD
• [PATCH v2] net: dwc_eth_qos: Fix support for stm32mp2 platform   Marek Vasut
  • [PATCH v2] net: dwc_eth_qos: Fix support for stm32mp2 platform   Christophe ROULLIER
    • [PATCH v2] net: dwc_eth_qos: Fix support for stm32mp2 platform   Patrice CHOTARD
• [PATCH] arch/riscv: Remove unused macro in encoding.h   Jimmy Ho
  • [PATCH] arch/riscv: Remove unused macro in encoding.h   Leo Liang
• [PATCH v2] imx93_frdm: Add support for flashing board with UUU   Mathieu Dubois-Briand
  • [PATCH v2] imx93_frdm: Add support for flashing board with UUU   Fabio Estevam
• [PATCH] lib: optee: Add line ending to debug() outputs   Jan Kiszka
  • [PATCH] lib: optee: Add line ending to debug() outputs   Tom Rini
• [PATCH] test: Fix optee unit test   Jan Kiszka
  • [PATCH] test: Fix optee unit test   Tom Rini
• [PATCH] doc: environment: clarify env precedence   mark.jonas at de.bosch.com
• [PATCH] Fix Linux reboot on MT7988 using EFI and PSCI   EasyNetDev
  • [PATCH] Fix Linux reboot on MT7988 using EFI and PSCI   EasyNetDev
    • Aw: [PATCH] Fix Linux reboot on MT7988 using EFI and PSCI   Frank Wunderlich
  • [PATCH] Fix Linux reboot on MT7988 using EFI and PSCI   Adrian Ban
    • [PATCH] Fix Linux reboot on MT7988 using EFI and PSCI   EasyNetDev
• [PATCH] cmd: spl: Remove ATAG support from this command   Tom Rini
  • [PATCH] cmd: spl: Remove ATAG support from this command   Anshul Dalal
    • [PATCH] cmd: spl: Remove ATAG support from this command   Tom Rini
• [PATCH v2] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Lukas Schmid
  • [PATCH v2] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Andre Przywara
  • [PATCH v2] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation   Andre Przywara
• Continued need for ATAGS-based booting?   Tom Rini
  • Continued need for ATAGS-based booting?   Tony Dinh
    • Continued need for ATAGS-based booting?   Tom Rini
  • Continued need for ATAGS-based booting?   Svyatoslav Ryhel
    • Continued need for ATAGS-based booting?   Wolfgang Wallner
      • Continued need for ATAGS-based booting?   Tom Rini
    • Continued need for ATAGS-based booting?   Tom Rini
      • Continued need for ATAGS-based booting?   Svyatoslav Ryhel
      • Continued need for ATAGS-based booting?   Tom Rini
• [PATCH] MAINTAINERS: Update Luka Perkov's roles   Tom Rini
  • [PATCH] MAINTAINERS: Update Luka Perkov's roles   Tony Dinh
  • [PATCH] MAINTAINERS: Update Luka Perkov's roles   Tom Rini
• [PATCH] power: regulator: pfuze100: Fix accessing the regulator desc   Tom Rini
  • [PATCH] power: regulator: pfuze100: Fix accessing the regulator desc   Peng Fan (OSS)
    • [PATCH] power: regulator: pfuze100: Fix accessing the regulator desc   Fabio Estevam
• [RFC PATCH] bootstage: stash boot records to reserved mem before kernel handoff   Vishnu Singh
• [PATCH] bootstage: stash boot records to reserved mem before kernel handoff   vishnu singh
  • [PATCH] bootstage: stash boot records to reserved mem before kernel handoff   Tom Rini
• [PATCH] usb: onboard-hub: Make i2c-bus option   Michal Simek
  • [PATCH] usb: onboard-hub: Make i2c-bus option   Marek Vasut
• [PATCH] board: ti: am57xx: Remove "ti/omap/" from name_fit_config   Anurag Dutta
  • [PATCH] board: ti: am57xx: Remove "ti/omap/" from name_fit_config   Kumar, Udit
• [PATCH v2] usb: onboard-hub: Make i2c-bus option   Michal Simek
  • [PATCH v2] usb: onboard-hub: Make i2c-bus option   Marek Vasut
• [PATCH v2 0/4] Add support for secure falcon mode: load kernel image before args   Anshul Dalal
  • [PATCH v2 1/4] spl: fat: load kernel image before args in falcon   Anshul Dalal
  • [PATCH v2 2/4] spl: ext: load kernel image before args in falcon   Anshul Dalal
  • [PATCH v2 3/4] spl: mmc: load kernel image before args in falcon   Anshul Dalal
  • [PATCH v2 4/4] spl: ext, fat: cleanup use of CONFIG_SPL_LIBCOMMON_SUPPORT   Anshul Dalal
• [PATCH v1 0/8] Add support for secure falcon mode: disable fallback   Anshul Dalal
  • [PATCH v1 2/8] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
  • [PATCH v1 3/8] spl: mmc: split spl_mmc_do_fs_boot into regular/os_boot   Anshul Dalal
    • [PATCH v1 3/8] spl: mmc: split spl_mmc_do_fs_boot into regular/os_boot   Tom Rini
      • [PATCH v1 3/8] spl: mmc: split spl_mmc_do_fs_boot into regular/os_boot   Anshul Dalal
  • [PATCH v1 4/8] spl: ubi: refactor spl_ubi_load_image for falcon mode   Anshul Dalal
    • [PATCH v1 4/8] spl: ubi: refactor spl_ubi_load_image for falcon mode   Tom Rini
      • [PATCH v1 4/8] spl: ubi: refactor spl_ubi_load_image for falcon mode   Anshul Dalal
  • [PATCH v1 5/8] spl: spi: refactor spl_spi_load_image for falcon mode   Anshul Dalal
  • [PATCH v1 6/8] spl: nor: refactor spl_nor_load_image for falcon mode   Anshul Dalal
  • [PATCH v1 7/8] spl: nand: refactor spl_nand_load_image for falcon mode   Anshul Dalal
  • [PATCH v1 8/8] spl: falcon: disable fallback to U-Boot on failure   Anshul Dalal
• [PATCH v1 1/8] spl: Kconfig: add SPL_OS_BOOT_SECURE config symbol   Anshul Dalal
• [PATCH -next v1] arm: armv8: remove redundant definition of mmu_status   Anshul Dalal
  • [PATCH -next v1] arm: armv8: remove redundant definition of mmu_status   Patrice CHOTARD
  • [PATCH -next v1] arm: armv8: remove redundant definition of mmu_status   Dhruva Gole
  • [PATCH -next v1] arm: armv8: remove redundant definition of mmu_status   Ilias Apalodimas
• RZG2L and DTB blob from TF-A   Mathieu Othacehe
  • RZG2L and DTB blob from TF-A   Marek Vasut
    • RZG2L and DTB blob from TF-A   Biju Das
      • RZG2L and DTB blob from TF-A   Mathieu Othacehe
      • RZG2L and DTB blob from TF-A   Biju Das
      • RZG2L and DTB blob from TF-A   Marek Vasut
      • RZG2L and DTB blob from TF-A   Mathieu Othacehe
      • RZG2L and DTB blob from TF-A   Biju Das
• [PATCH u-boot-test-hooks 1/2] bin: add helper script for testing swtmp with TF-A   Raymond Mao
  • [PATCH u-boot-test-hooks 2/2] travis-ci: add config file for testing firmware handoff on qemu_arm64   Raymond Mao
    • [PATCH u-boot-test-hooks 2/2] travis-ci: add config file for testing firmware handoff on qemu_arm64   Tom Rini
      • [PATCH u-boot-test-hooks 2/2] travis-ci: add config file for testing firmware handoff on qemu_arm64   Raymond Mao
      • [PATCH u-boot-test-hooks 2/2] travis-ci: add config file for testing firmware handoff on qemu_arm64   Tom Rini
      • Re: [PATCH u-boot-test-hooks 2/2] travis-ci: add config file for testing firmware handoff on qemu_arm64   Heinrich Schuchardt
      • [PATCH u-boot-test-hooks 2/2] travis-ci: add config file for testing firmware handoff on qemu_arm64   Raymond Mao
      • [PATCH u-boot-test-hooks 2/2] travis-ci: add config file for testing firmware handoff on qemu_arm64   Tom Rini
  • [PATCH u-boot-test-hooks 1/2] bin: add helper script for testing swtmp with TF-A   Tom Rini
• [PATCH 0/5] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
  • [PATCH 1/5] docker: add OP-TEE build for testing Firmware Handoff   Raymond Mao
    • [PATCH 1/5] docker: add OP-TEE build for testing Firmware Handoff   Tom Rini
  • [PATCH 2/5] ci: add post-buildman script to build TF-A   Raymond Mao
    • [PATCH 2/5] ci: add post-buildman script to build TF-A   Tom Rini
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Raymond Mao
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Tom Rini
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Raymond Mao
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Simon Glass
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Tom Rini
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Simon Glass
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Tom Rini
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Raymond Mao
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Tom Rini
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Simon Glass
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Raymond Mao
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Tom Rini
      • [PATCH 2/5] ci: add post-buildman script to build TF-A   Raymond Mao
  • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Raymond Mao
    • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Tom Rini
      • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Raymond Mao
      • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Tom Rini
      • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Raymond Mao
      • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Tom Rini
      • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Raymond Mao
      • [PATCH 3/5] pytest: add test script to validate Firmware Handoff   Tom Rini
  • [PATCH 4/5] configs: select CMD_BLOBLIST for Firmware Handoff testing   Raymond Mao
  • [PATCH 5/5] ci: add test entries for qemu_arm64_tfa_fw_handoff   Raymond Mao
    • [PATCH 5/5] ci: add test entries for qemu_arm64_tfa_fw_handoff   Tom Rini
• [PATCH] scripts: checkpatch.pl: Extend some checks to "env" files   Tom Rini
  • [PATCH] scripts: checkpatch.pl: Extend some checks to "env" files   Tom Rini
• Gitlab CI slowdown   Tom Rini
  • Gitlab CI slowdown   Simon Glass
    • Gitlab CI slowdown   Tom Rini
      • Gitlab CI slowdown   Simon Glass
• [PATCH] mkimage: add register initialization file support to zynqmpbif   Erich E. Hoover
  • [PATCH] mkimage: add register initialization file support to zynqmpbif   Michal Simek
    • [PATCH] mkimage: add register initialization file support to zynqmpbif   Erich E. Hoover
• [PATCH v3 0/4] riscv: dts: starfive: prune redundant jh7110-common   E Shattow
  • [PATCH v3 1/4] riscv: dts: starfive: prune redundant jh7110-common overrides   E Shattow
    • [PATCH v3 1/4] riscv: dts: starfive: prune redundant jh7110-common overrides   Leo Liang
  • [PATCH v3 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next   E Shattow
    • [PATCH v3 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next   E Shattow
    • [PATCH v3 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next   Leo Liang
  • [PATCH v3 3/4] riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi inclusion   E Shattow
    • [PATCH v3 3/4] riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi inclusion   Leo Liang
  • [PATCH v3 4/4] configs: starfive: Use visionfive2 DEVICE_TREE_INCLUDES dtsi named similar to defconfig   E Shattow
    • [PATCH v3 4/4] configs: starfive: Use visionfive2 DEVICE_TREE_INCLUDES dtsi named similar to defconfig   Leo Liang
• [PATCH v2] doc: Update mentions of README.fdt-control   E Shattow
  • [PATCH v2] doc: Update mentions of README.fdt-control   Quentin Schulz
    • [PATCH v2] doc: Update mentions of README.fdt-control   E Shattow
• [PATCH v2] board: ti: am57xx: Remove "ti/omap/" from name_fit_config   Anurag Dutta
  • [PATCH v2] board: ti: am57xx: Remove "ti/omap/" from name_fit_config   Dutta, Anurag
  • [PATCH v2] board: ti: am57xx: Remove "ti/omap/" from name_fit_config   Kumar, Udit
  • [PATCH v2] board: ti: am57xx: Remove "ti/omap/" from name_fit_config   Tom Rini
• [PULL] Pull request for u-boot master / v2025.10 = u-boot-stm32-20250917   Patrice CHOTARD
  • [PULL] Pull request for u-boot master / v2025.10 = u-boot-stm32-20250917   Tom Rini
• [PATCH] xilinx: Disable SPL_OS_BOOT for Zynq and ZynqMP   Michal Simek
  • [PATCH] xilinx: Disable SPL_OS_BOOT for Zynq and ZynqMP   Tom Rini
• [PATCH] arm: Change SYS_INIT_SP_BSS_OFFSET from int to hex   Michal Simek
  • [PATCH] arm: Change SYS_INIT_SP_BSS_OFFSET from int to hex   Tom Rini
• [RESEND PATCH] drivers/mtd/ubispl/ubispl.c: limit copy size   Benedikt Spranger
• [PATCH v4 0/4] Hyperflash boot fixes for j721e/j7200   Anurag Dutta
  • [PATCH v4 1/4] mtd: Kconfig: Add SPL_MUX_MMIO dependency to HBMC driver   Anurag Dutta
  • [PATCH v4 2/4] configs: j721e_evm_r5: Enable HBMC and MUX_MMIO at SPL   Anurag Dutta
  • [PATCH v4 3/4] configs: j7200_evm_*_defconfig: Enable HBMC and MUX_MMIO at SPL   Anurag Dutta
  • [PATCH v4 4/4] arm: dts: k3-j721e-r5-common-proc-board: Enable HBMC in R5 SPL stage   Anurag Dutta
  • [PATCH v4 0/4] Hyperflash boot fixes for j721e/j7200   Tom Rini
• [PATCH] stm32mp2: update register used by BL31 for boot parameter   Patrick Delaunay
  • [PATCH] stm32mp2: update register used by BL31 for boot parameter   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] stm32mp2: update register used by BL31 for boot parameter   Patrice CHOTARD
• [PATCH v2 0/9] U-Boot Bringup of SM6350 SoC   Luca Weiss
  • [PATCH v2 1/9] clk/qcom: Add SM6350 clock driver   Luca Weiss
  • [PATCH v2 2/9] clk/stub: add sm6350-rpmh clock   Luca Weiss
  • [PATCH v2 3/9] drivers: pinctrl: Add Qualcomm SM6350 TLMM driver   Luca Weiss
  • [PATCH v2 4/9] iommu: qcom-smmu: Add qcom,sm6350-smmu-500 compatible   Luca Weiss
  • [PATCH v2 5/9] phy: qcom: Add SM6350 to QMP UFS PHY driver   Luca Weiss
  • [PATCH v2 6/9] regulator: qcom-rpmh-regulator: add support for pm6150l regulators   Luca Weiss
  • [PATCH v2 7/9] gpio: qcom: Support GPIOs on PM6350 PMIC   Luca Weiss
    • [PATCH v2 7/9] gpio: qcom: Support GPIOs on PM6350 PMIC   Neil Armstrong
  • [PATCH v2 8/9] qcom_defconfig: Enable SM6350 clock and pinctrl drivers   Luca Weiss
  • [PATCH v2 9/9] board/qualcomm: add debug config fragment for SM6350   Luca Weiss
• [PATCH] gpio: qcom: Support GPIOs on PM7325 PMIC   Luca Weiss
  • [PATCH] gpio: qcom: Support GPIOs on PM7325 PMIC   Neil Armstrong
• [PATCH v1] doc: memory: fix encodings for spl layout diagrams   Anshul Dalal
• [GIT PULL] Please pull u-boot-imx-master-20250917   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20250917   Tom Rini
• [PATCH 2/2] watchdog: Add implementation of NVIDIA's Tegra 30 watchdog driver   Svyatoslav Ryhel
• [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Kory Maincent
  • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Quentin Schulz
    • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Patrice CHOTARD
  • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Patrice CHOTARD
    • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Kory Maincent
      • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Patrice CHOTARD
      • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Kory Maincent
      • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Patrice CHOTARD
      • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Tom Rini
      • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Patrice CHOTARD
      • [PATCH] Revert "board: st: stm32mp1: Clean env_get_location()"   Tom Rini
• [PATCH] clk: imx6q: Add definition for missing PWM clocks   mark.jonas at de.bosch.com
  • [PATCH] clk: imx6q: Add definition for missing PWM clocks   Fabio Estevam
• [PATCH v2 1/2] vexpress63: Set the DM_RNG property   Debbie Horsfall
  • [PATCH v2 2/2] arm: vexpress64: Enable SYSRESET and SYSRESET_PSCI   Debbie Horsfall
  • [PATCH v2 1/2] vexpress63: Set the DM_RNG property   Andre Przywara
    • [PATCH v2 1/2] vexpress63: Set the DM_RNG property   Tom Rini
  • [PATCH v2 1/2] vexpress63: Set the DM_RNG property   Tom Rini
• DO YOU NEED A FINANCIER TO FINANCE YOUR BUSINESS   info.kexyhdwr at service.bhkbra.cn
  • DO YOU NEED A FINANCIER TO FINANCE YOUR BUSINESS   info.kexyhdwr at service.bhkbra.cn
• [PATCH v5 0/3] PHYTEC imx8m boards: enable OP-TEE as default   Yannic Moog
  • [PATCH v5 2/3] doc: phytec: update imx8m docs for optee builds   Yannic Moog
  • [PATCH v5 3/3] doc: phytec: imx8m: Style and firmware update   Yannic Moog
  • [PATCH v5 0/3] PHYTEC imx8m boards: enable OP-TEE as default   Fabio Estevam
• [PATCH v5 1/3] phytec-imx8m boards: enable OP-TEE for KASLR   Yannic Moog
• [PATCH v2 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Lukasz Majewski
  • [PATCH v2 2/2] watchdog: Add implementation of NVIDIA's Tegra watchdog driver   Lukasz Majewski
    • [PATCH v2 2/2] watchdog: Add implementation of NVIDIA's Tegra watchdog driver   Svyatoslav Ryhel
  • [PATCH v2 1/2] timer: tegra: Bind watchdog driver when timer node is processed   Svyatoslav Ryhel
• [PATCH 1/4] configs: th1520_lpi4a: Enlarge SYS_MALLOC_F_LEN to 0x10000   Leo Liang
• [PATCH 2/4] clk: thead: th1520-ap: Mark drivers as DM_FLAG_PRE_RELOC   Leo Liang
• [PATCH 3/4] pinctrl: th1520: Mark driver as DM_FLAG_PRE_RELOC   Leo Liang
• [PATCH 4/4] dts: th1520: Switch to upstream devicetree   Leo Liang
• [PATCH] include: configs: andes: Remove fdt_high env variable   Leo Liang
• [PATCH] board: rzg2l: Do not expect a DTB blob from the TF-A.   Mathieu Othacehe
  • [PATCH] board: rzg2l: Do not expect a DTB blob from the TF-A.   Marek Vasut
    • [PATCH] board: rzg2l: Do not expect a DTB blob from the TF-A.   Mathieu Othacehe
      • [PATCH] board: rzg2l: Do not expect a DTB blob from the TF-A.   Marek Vasut
      • [PATCH] board: rzg2l: Do not expect a DTB blob from the TF-A.   Mathieu Othacehe
• [PATCH 1/2] pci: pcie-rcar-gen4: Shut down controller on link down and remove   Marek Vasut
  • [PATCH 2/2] arm64: renesas: r8a779g3: Reset PCIe before next stage on Retronix R-Car V4H Sparrow Hawk   Marek Vasut
• [PATCH] arm64: Add MIDR entry for Cortex-A720   Marek Vasut
  • [PATCH] arm64: Add MIDR entry for Cortex-A720   Tom Rini
  • [PATCH] arm64: Add MIDR entry for Cortex-A720   Peng Fan
• [RFC PATCH v3 0/1] Add initial support for AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH v3 1/1] Add initial support for AM62D2-EVM   Paresh Bhagat
    • [RFC PATCH v3 1/1] Add initial support for AM62D2-EVM   Andrew Davis
• [PATCH 1/7] doc: make pdfdocs: Specify texlive-xetex as a prerequisite   E Shattow
• [PATCH] doc: build: documentation: add description of KDOC_WERROR   E Shattow
• [PULL] Pull request for u-boot next / v2026.01 = u-boot-stm32-20250919   Patrice CHOTARD
  • [PULL] Pull request for u-boot next / v2026.01 = u-boot-stm32-20250919   Tom Rini
    • [PULL] Pull request for u-boot next / v2026.01 = u-boot-stm32-20250919   Patrice CHOTARD
  • [PULL] Pull request for u-boot next / v2026.01 = u-boot-stm32-20250919   Tom Rini
• [PATCH 0/2] Fix boot w/ scriptaddr & minor newline issue   Wadim Egorov
  • [PATCH 0/2] Fix boot w/ scriptaddr & minor newline issue   Tom Rini
• [PATCH 1/2] board: phytec: phycore_am6xx: Update scriptaddr   Wadim Egorov
  • [PATCH 1/2] board: phytec: phycore_am6xx: Update scriptaddr   Anshul Dalal
• [PATCH 2/2] board: phytec: common: Fix missing newline in error message   Wadim Egorov
• [PATCH] imx: imx8ulp: Call DM post init function for init_r phase   Ye Li
  • [PATCH] imx8ulp_evk: Fix ELE FW version print bug   Ye Li
    • [PATCH] imx8ulp_evk: Fix ELE FW version print bug   Fabio Estevam
  • [PATCH] arm: imx9: Fix LPCG number in ccm_reg structure   Ye Li
    • [PATCH] arm: imx9: Fix LPCG number in ccm_reg structure   Fabio Estevam
  • [PATCH] imx: imx8ulp: Call DM post init function for init_r phase   Peng Fan
  • [PATCH] imx: imx8ulp: Call DM post init function for init_r phase   Fabio Estevam
• [PATCH] cmd: sf: align erase and write on erase block boundary   Ye Li
  • [PATCH] cmd: sf: align erase and write on erase block boundary   Peng Fan
  • [PATCH] cmd: sf: align erase and write on erase block boundary   Marek Vasut
    • [PATCH] cmd: sf: align erase and write on erase block boundary   Ye Li
    • [PATCH] cmd: sf: align erase and write on erase block boundary   Marek Vasut
      • [PATCH] cmd: sf: align erase and write on erase block boundary   Ye Li
• [PATCH] board: phytec: phycore-imx93: Fix i.MX93 voltage modes   Primoz Fiser
  • [PATCH] board: phytec: phycore-imx93: Fix i.MX93 voltage modes   Fabio Estevam
• [PATCH 0/9] exports overhaul   Rasmus Villemoes
  • [PATCH 2/9] _exports.h: drop creating dummy i2c entries and fixup config dependency   Rasmus Villemoes
  • [PATCH 3/9] _exports.h: simplify condition for including spi functions   Rasmus Villemoes
  • [PATCH 4/9] _exports.h: drop the last dummy entries   Rasmus Villemoes
  • [PATCH 5/9] exports.c: drop unused dummy function   Rasmus Villemoes
  • [PATCH 6/9] exports.h: make sure declarations are in sync with the actual exports   Rasmus Villemoes
  • [PATCH 7/9] _exports.h: reorganize a bit   Rasmus Villemoes
  • [PATCH 8/9] _exports.h: export standard memory/string handling functions   Rasmus Villemoes
  • [PATCH 9/9] exports.h: bump XF_VERSION   Rasmus Villemoes
  • [PATCH 0/9] exports overhaul   Tom Rini
  • [PATCH 0/9] exports overhaul   Tom Rini
• [PATCH 1/9] malloc.h: be a bit more consistent with macro definitions   Rasmus Villemoes
• [PATCH] arm: gpio: Add set_flags callback to the Tegra gpio driver   Lukasz Majewski
  • [PATCH] arm: gpio: Add set_flags callback to the Tegra gpio driver   Svyatoslav Ryhel
    • [PATCH] arm: gpio: Add set_flags callback to the Tegra gpio driver   Łukasz Majewski
      • [PATCH] arm: gpio: Add set_flags callback to the Tegra gpio driver   Svyatoslav Ryhel
• [PATCH 0/3] Drop ATAGS for B&R boards   Wolfgang Wallner
  • [PATCH 1/3] configs: brcp1: Drop CONFIG_SUPPORT_PASSING_ATAGS   Wolfgang Wallner
  • [PATCH 2/3] configs: brcp150: Drop CONFIG_SUPPORT_PASSING_ATAGS   Wolfgang Wallner
  • [PATCH 3/3] configs: brcp170: Drop CONFIG_SUPPORT_PASSING_ATAGS   Wolfgang Wallner
• [PATCH RFC] lib: optee: forbid OP-TEE OS loading without adding OP-TEE OS reserved-memory nodes   Quentin Schulz
  • [PATCH RFC] lib: optee: forbid OP-TEE OS loading without adding OP-TEE OS reserved-memory nodes   Tom Rini
    • [PATCH RFC] lib: optee: forbid OP-TEE OS loading without adding OP-TEE OS reserved-memory nodes   Quentin Schulz
• Seeking advice on API return type inconsistency   Simon Glass
  • Seeking advice on API return type inconsistency   Michal Suchánek
• [PATCH v3 1/2] smbios: Fix duplicated smbios handles   Raymond Mao
  • [PATCH v3 2/2] smbios: add support for dynamic generation of Type 9 system slot tables   Raymond Mao
    • [PATCH v3 2/2] smbios: add support for dynamic generation of Type 9 system slot tables   Ilias Apalodimas
  • [PATCH v3 1/2] smbios: Fix duplicated smbios handles   Ilias Apalodimas
• [PATCH] MAINTAINERS: Add myself into the list for MbedTLS   Raymond Mao
  • [PATCH] MAINTAINERS: Add myself into the list for MbedTLS   Ilias Apalodimas
  • [PATCH] MAINTAINERS: Add myself into the list for MbedTLS   Tom Rini
• [PATCH] arm: mach-qemu: add support for qemu booted from TF-A.   Raymond Mao
  • [PATCH] arm: mach-qemu: add support for qemu booted from TF-A.   chalianis1 at gmail.com
  • [PATCH] arm: mach-qemu: add support for qemu booted from TF-A.   anis chali
• [GIT,PULL] u-boot-riscv/next   Leo Liang
  • [GIT,PULL] u-boot-riscv/next   Tom Rini
    • [GIT,PULL] u-boot-riscv/next   E Shattow
      • [GIT,PULL] u-boot-riscv/next   E Shattow
      • [GIT,PULL] u-boot-riscv/next   Yao Zi
      • [GIT,PULL] u-boot-riscv/next   E Shattow
• [PATCH 0/5] net: mediatek: mt7988: various fixup + MDIO detach   Christian Marangi
  • [PATCH 1/5] net: mediatek: mt7988: fix broken phy_setting config   Christian Marangi
  • [PATCH 2/5] net: mediatek: mt7988: restore PHY page on PHY setting exit   Christian Marangi
  • [PATCH 3/5] net: mediatek: mt7988: free allocated MDIO bus on cleanup   Christian Marangi
  • [PATCH 4/5] net: mediatek: move MT7531 MMIO MDIO to dedicated driver   Christian Marangi
  • [PATCH 5/5] net: airoha: bind MDIO controller on Ethernet load   Christian Marangi
• [PATCH v2 0/5] net: mediatek: mt7988: various fixup + MDIO detach   Christian Marangi
  • [PATCH v2 1/5] net: mediatek: mt7531/7988: fix broken PHY turn ON/OFF   Christian Marangi
  • [PATCH v2 2/5] net: mediatek: mt7988: restore PHY page on PHY setting exit   Christian Marangi
  • [PATCH v2 3/5] net: mediatek: mt7988: free allocated MDIO bus on cleanup   Christian Marangi
  • [PATCH v2 4/5] net: mediatek: move MT7531 MMIO MDIO to dedicated driver   Christian Marangi
  • [PATCH v2 5/5] net: airoha: bind MDIO controller on Ethernet load   Christian Marangi
• [PATCH] MT7988 add LED Blue/Green + WPS/Reset Button   EasyNetDev
  • Aw: [PATCH] MT7988 add LED Blue/Green + WPS/Reset Button   Frank Wunderlich
    • Aw: [PATCH] MT7988 add LED Blue/Green + WPS/Reset Button   Weijie Gao
• [RFC, PATCH] fdt: Make sure there is no stale initrd left   Sam Protsenko
• [PATCH] sunxi: OLinuXino-A64 needs the CONFIG_GMAC_TX_DELAY=4 workaround.   Andre Przywara
• [PATCH v1 0/1] Tegra: remove ATAGS support   Svyatoslav Ryhel
  • [PATCH v1 1/1] configs: tegra: remove ATAGS support   Svyatoslav Ryhel
    • [PATCH v1 1/1] configs: tegra: remove ATAGS support   Peter Robinson
• [PATCH] misc: fs_loader: Use buffer pointer in request_firmware_into_buf_via_script()   Marek Vasut
  • [PATCH] misc: fs_loader: Use buffer pointer in request_firmware_into_buf_via_script()   Weijie Gao
• [PATCH] arm64: zynqmp: Fix DTOVL warning about graphs in kv/kr260   Michal Simek
  • [PATCH] arm64: zynqmp: Fix DTOVL warning about graphs in kv/kr260   Michal Simek
• [PATCH 0/3] lwIP fixes (SNTP with DHCP)   Jerome Forissier
  • [PATCH 1/3] net: lwip: enable debug traces for SNTP when CONFIG_LWIP_DEBUG is set   Jerome Forissier
  • [PATCH 2/3] net: lwip: dhcp: make NTP servers usable by the sntp command   Jerome Forissier
  • [PATCH 3/3] net: lwip: dhcp: set ntpserverip environment variable   Jerome Forissier
  • [PATCH 0/3] lwIP fixes (SNTP with DHCP)   Michal Simek
• [PATCH 1/4] spi: nxp_fspi: Use second last LUT entry for AHB read   Ye Li
  • [PATCH 2/4] spi: nxp_fspi: Support i.MX8QXP flexspi   Ye Li
  • [PATCH 3/4] spi: nxp_fspi: Support i.MX8DXL flexspi   Ye Li
    • [PATCH 3/4] spi: nxp_fspi: Support i.MX8DXL flexspi   Fabio Estevam
      • [PATCH 3/4] spi: nxp_fspi: Support i.MX8DXL flexspi   Ye Li
  • [PATCH 4/4] spi: nxp_fspi: Support i.MX8ULP flexspi   Ye Li
  • [PATCH 1/4] spi: nxp_fspi: Use second last LUT entry for AHB read   Fabio Estevam
• [PATCH 1/2] fw_loader: Split from fs_loader into separate library file   Marek Vasut
  • [PATCH 2/2] fw_loader: Prefix the FW loader variables with the script prefix   Marek Vasut
• [PATCH] linux/kernel.h: Update upper_NN_bits() and lower_NN_bits() macros   Marek Vasut
  • [PATCH] linux/kernel.h: Update upper_NN_bits() and lower_NN_bits() macros   Tom Rini
• [PATCH] usb: musb-new: fix ti-musb dependencies   yegorslists at googlemail.com
• [PATCH] clk: ti: fix K3 clock driver help texts   yegorslists at googlemail.com
  • [PATCH] clk: ti: fix K3 clock driver help texts   Quentin Schulz
• [PATCH] net: fix RMII help text   yegorslists at googlemail.com
  • [PATCH] net: fix RMII help text   Quentin Schulz
• [PATCH] usb: musb-new: fix typos   yegorslists at googlemail.com
  • [PATCH] usb: musb-new: fix typos   Marek Vasut
• [GIT PULL] Please pull u-boot-imx-master-20250922   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20250922   Tom Rini
• [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Lukasz Majewski
  • [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Svyatoslav Ryhel
    • [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Łukasz Majewski
      • [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Svyatoslav Ryhel
      • [PATCH v2] arm: gpio: Add set_flags callback to the Tegra gpio driver   Łukasz Majewski
• [GIT PULL] Please pull u-boot-imx-next-20250922   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-next-20250922   Tom Rini
  • [GIT PULL] Please pull u-boot-imx-next-20250922   Tom Rini
• [PATCH v3] env: spi: Fix gd->env_valid for the first write   Michal Simek
  • [PATCH v3] env: spi: Fix gd->env_valid for the first write   Marek Vasut
    • [PATCH v3] env: spi: Fix gd->env_valid for the first write   E Shattow
      • [PATCH v3] env: spi: Fix gd->env_valid for the first write   Michal Simek
• [PATCH v2] board: rzg2l: Check the DTB pointer passed by the TF-A.   Mathieu Othacehe
  • [PATCH v2] board: rzg2l: Check the DTB pointer passed by the TF-A.   Marek Vasut
  • [PATCH v2] board: rzg2l: Check the DTB pointer passed by the TF-A.   Hugo Villeneuve
• [PATCH 0/4] net: phy: aquantia: Switch to generic firmware loader   Beiyan Yun
  • [PATCH 0/4] net: phy: aquantia: Switch to generic firmware loader   Beiyan Yun
• [PATCH 1/4] net: phy: aquantia: switch to use phy_get_ofnode()   Beiyan Yun
  • [PATCH 1/4] net: phy: aquantia: switch to use phy_get_ofnode()   Beiyan Yun
• [PATCH 2/4] doc: bindings: fix aquantia-phy.txt typo   Beiyan Yun
• [PATCH 3/4] net: phy: aquantia: use generic firmware loader   Beiyan Yun
• [PATCH 4/4] doc: bindings: add Aquantia PHY node's "firmware-name" binding   Beiyan Yun
• [PATCH v1] arm: socfpga: mailbox: Remove CONFIG_CADENCE_QSPI guard from QSPI mailbox API declarations   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1] arm: socfpga: mailbox: Remove CONFIG_CADENCE_QSPI guard from QSPI mailbox API declarations   Chee, Tien Fong
• [PATCH v3 00/12] imx: add i.MX94 support   Alice Guo (OSS)
  • [PATCH v3 01/12] imx9: Add i.MX94 CPU type and SoC-level Kconfig   Alice Guo (OSS)
  • [PATCH v3 02/12] cpu: imx94: Add support for i.MX94 in get_imx_type_str()   Alice Guo (OSS)
  • [PATCH v3 03/12] imx95: Add get_reset_reason() to retrieve the LM/system last booted/shutdown reasons   Alice Guo (OSS)
  • [PATCH v3 04/12] imx9: scmi: Add i.MX94 support to get_reset_reason()   Alice Guo (OSS)
  • [PATCH v3 05/12] imx9: scmi: Update the files under arch/arm/mach-imx/imx9/scmi/ to support i.MX94   Alice Guo (OSS)
  • [PATCH v3 06/12] imx: container: Add i.MX94 support to get_imageset_end()   Alice Guo (OSS)
  • [PATCH v3 07/12] pinctrl: nxp: Add i.MX94 daisy register offset   Alice Guo (OSS)
  • [PATCH v3 08/12] imx9: Change container header temp buffer address   Alice Guo (OSS)
  • [PATCH v3 09/12] imx: ele_ahab: Implement display_life_cycle() for i.MX95   Alice Guo (OSS)
  • [PATCH v3 10/12] imx: ele_ahab: Add i.MX94 support to display_life_cycle()   Alice Guo (OSS)
  • [PATCH v3 11/12] arm: dts: Add i.MX943 EVK board dtsi files   Alice Guo (OSS)
  • [PATCH v3 12/12] imx94_evk: Add i.MX943 EVK board support   Alice Guo (OSS)
  • [PATCH v3 00/12] imx: add i.MX94 support   Fabio Estevam
• [RFC PATCH v4 0/1] Add initial support for AM62D2-EVM   Paresh Bhagat
  • [RFC PATCH v4 1/1] Add initial support for AM62D2-EVM   Paresh Bhagat
• [PATCH RESEND 0/4] net: phy: aquantia: Switch to generic firmware loader   Beiyan Yun
  • [PATCH RESEND 1/4] net: phy: aquantia: switch to use phy_get_ofnode()   Beiyan Yun
  • [PATCH RESEND 2/4] doc: bindings: fix aquantia-phy.txt typo   Beiyan Yun
  • [PATCH RESEND 3/4] net: phy: aquantia: use generic firmware loader   Beiyan Yun
  • [PATCH RESEND 4/4] doc: bindings: add Aquantia PHY node's "firmware-name" binding   Beiyan Yun
    • [PATCH RESEND 4/4] doc: bindings: add Aquantia PHY node's "firmware-name" binding   Yao Zi
      • [PATCH RESEND 4/4] doc: bindings: add Aquantia PHY node's "firmware-name" binding   Beiyan Yun
      • [PATCH RESEND 4/4] doc: bindings: add Aquantia PHY node's "firmware-name" binding   Beiyan Yun
      • [PATCH RESEND 4/4] doc: bindings: add Aquantia PHY node's "firmware-name" binding   Yao Zi
      • [PATCH RESEND 4/4] doc: bindings: add Aquantia PHY node's "firmware-name" binding   Tom Rini
• [PATCH 1/2] clk: at91: Add ACR in all PLL setting.   Manikandan Muralidharan
  • [PATCH 2/2] ARM: at91: remove default values for PMC_PLL_ACR   Manikandan Muralidharan
• [PATCH 0/3] mkimage: fit: various fixes in fit_{import,extract}_data   Quentin Schulz
  • [PATCH 1/3] mkimage: fit: do not overwrite fdt_setprop return value   Quentin Schulz
  • [PATCH 3/3] mkimage: fit: erase data-size property when importing data   Quentin Schulz
• [PATCH 2/3] mkimage: fit: do not ignore fdt_setprop return code   Quentin Schulz
• [PATCH] board: phytec: phycore-imx93: Set CONFIG_ETHPRIME to eth0   Primoz Fiser
• [PATCH 00/10] Enable USB and ENETC on i.MX943 EVK   Alice Guo (OSS)
  • [PATCH 01/10] usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95   Alice Guo (OSS)
  • [PATCH 02/10] arm: arch-imx9: Add USB2.0 and USB3.0 base address definitions   Alice Guo (OSS)
  • [PATCH 03/10] imx943_evk: Enable USB 2.0 controller host mode   Alice Guo (OSS)
  • [PATCH 04/10] Add serial# for SPL SDP download   Alice Guo (OSS)
  • [PATCH 05/10] usb: f_sdp: Update SDP driver to support PQC container   Alice Guo (OSS)
    • [PATCH 05/10] usb: f_sdp: Update SDP driver to support PQC container   Mattijs Korpershoek
  • [PATCH 06/10] phy: imx8mq-usb: Add SPL support for i.MX8MQ, i.MX8MP, i.MX95, and i.MX94 USB3.0 PHY   Alice Guo (OSS)
  • [PATCH 07/10] imx943_evk: Add support for booting from USB SDP on USB3.0   Alice Guo (OSS)
  • [PATCH 08/10] net: fsl_enetc: Add i.MX94 support to NETC block control driver   Alice Guo (OSS)
  • [PATCH 09/10] net: fsl_enetc_mdio: Add support for phy-supply property   Alice Guo (OSS)
  • [PATCH 10/10] imx943_evk: Enable ENETC1 and ENETC2   Alice Guo (OSS)
• [PATCH v3 0/4] Add support for secure falcon mode: load kernel image before args   Anshul Dalal
  • [PATCH v3 2/4] spl: ext: load kernel image before args in falcon   Anshul Dalal
  • [PATCH v3 3/4] spl: mmc: load kernel image before args in falcon   Anshul Dalal
  • [PATCH v3 4/4] spl: ext, fat: cleanup use of CONFIG_SPL_LIBCOMMON_SUPPORT   Anshul Dalal
• [PATCH v3 1/4] spl: fat: load kernel image before args in falcon   Anshul Dalal
• [PATCH v2 0/8] Add support for secure falcon mode: disable fallback   Anshul Dalal
  • [PATCH v2 2/8] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
    • [PATCH v2 2/8] spl: Kconfig: allow K3 devices to use falcon mode   Andrew Davis
      • [PATCH v2 2/8] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
      • [PATCH v2 2/8] spl: Kconfig: allow K3 devices to use falcon mode   Andrew Davis
  • [PATCH v2 3/8] spl: mmc: split spl_mmc_do_fs_boot into regular/os_boot   Anshul Dalal
  • [PATCH v2 4/8] spl: ubi: refactor spl_ubi_load_image for falcon mode   Anshul Dalal
  • [PATCH v2 5/8] spl: spi: refactor spl_spi_load_image for falcon mode   Anshul Dalal
  • [PATCH v2 6/8] spl: nor: refactor spl_nor_load_image for falcon mode   Anshul Dalal
  • [PATCH v2 7/8] spl: nand: refactor spl_nand_load_image for falcon mode   Anshul Dalal
  • [PATCH v2 8/8] spl: falcon: disable fallback to U-Boot on failure   Anshul Dalal
• [PATCH v2 1/8] spl: Kconfig: add SPL_OS_BOOT_SECURE config symbol   Anshul Dalal
• [ANN] U-Boot v2025.10-r5 4released   Tom Rini
• [PATCH v2] bootstd: make it possible to use tftp for netboot with standardboot   Benjamin Hahn
  • [PATCH v2] bootstd: make it possible to use tftp for netboot with standardboot   Tom Rini
• [PATCH] doc: develop: process: Add note about asking for feedback   Tom Rini
• [PATCH 1/4] colibri-imx8x: Increase the boot delay   Simon Glass
• [PATCH 2/4] scripts: Update build-efi/qemu to support disabling pager   Simon Glass
• [PATCH 3/4] efi: test: Update distro EFI-app tests for new naming   Simon Glass
• [PATCH 4/4] test: Deal with the silent menu in grub   Simon Glass
• Reviewers please for Flat Image Tree (FIT) Spec   Simon Glass
• [PATCH v3] doc: Update mentions of README.fdt-control   E Shattow
• [PATCH 1/3] pci: pcie-rcar-gen4: Fix inverted break condition in PHY initialization   Marek Vasut
  • [PATCH 2/3] pci: pcie-rcar-gen4: Assure reset occurs before DBI access   Marek Vasut
  • [PATCH 3/3] pci: pcie-rcar-gen4: Add missing 1ms delay after PWR reset assertion   Marek Vasut
• [PATCH] qcom_defconfig: enable watchdog command   Paul Sajna
  • [PATCH] qcom_defconfig: enable watchdog command   Neil Armstrong
• [PATCH v2 1/4] spi: nxp_fspi: Use second last LUT entry for AHB read   Ye Li
  • [PATCH v2 2/4] spi: nxp_fspi: Support i.MX8QXP flexspi   Ye Li
  • [PATCH v2 3/4] spi: nxp_fspi: Support i.MX8DXL flexspi   Ye Li
  • [PATCH v2 4/4] spi: nxp_fspi: Support i.MX8ULP flexspi   Ye Li
  • [PATCH v2 1/4] spi: nxp_fspi: Use second last LUT entry for AHB read   Fabio Estevam
• [PATCH RESEND v2 0/3] cmd: mtd: improvements   Mikhail Kshevetskiy
  • [PATCH RESEND v2 1/3] cmd: mtd: add markbad command support   Mikhail Kshevetskiy
    • [PATCH RESEND v2 1/3] cmd: mtd: add markbad command support   Michael Nazzareno Trimarchi
  • [PATCH RESEND v2 2/3] cmd: mtd: add nand_write_test command support   Mikhail Kshevetskiy
  • [PATCH RESEND v2 3/3] cmd: mtd: add nand_read_test command support   Mikhail Kshevetskiy
• [PATCH v3] bootstd: make it possible to use tftp for netboot with standardboot   Benjamin Hahn
  • [PATCH v3] bootstd: make it possible to use tftp for netboot with standardboot   Simon Glass
• [PATCH v4 0/4] Enable USB3.1 for Agilex5   Naresh Kumar Ravulapalli
  • [PATCH v4 1/4] arch: arm: dts: Enable USB3.1 for Agilex5   Naresh Kumar Ravulapalli
    • [PATCH v4 1/4] arch: arm: dts: Enable USB3.1 for Agilex5   Chee, Tien Fong
  • [PATCH v4 2/4] configs: Enable USB DWC3 host drivers for Agilex5   Naresh Kumar Ravulapalli
    • [PATCH v4 2/4] configs: Enable USB DWC3 host drivers for Agilex5   Chee, Tien Fong
  • [PATCH v4 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Naresh Kumar Ravulapalli
    • [PATCH v4 3/4] configs: Increase USB Hub debounce timeout in Agilex5   Chee, Tien Fong
  • [PATCH v4 4/4] arch: arm: socfpga: Configure USB3 System Manager registers   Naresh Kumar Ravulapalli
    • [PATCH v4 4/4] arch: arm: socfpga: Configure USB3 System Manager registers   Chee, Tien Fong
• am335x: NAND boot problem using the legacy u-boot.img   Yegor Yefremov
  • am335x: NAND boot problem using the legacy u-boot.img   Tom Rini
    • am335x: NAND boot problem using the legacy u-boot.img   Yegor Yefremov
      • am335x: NAND boot problem using the legacy u-boot.img   Tom Rini
• [PATCH] Allwinner: fix booting on a number of devices   Andre Przywara
• [PATCH 0/5] Colorful mix of small fixes and UART improvements for Qualcomm   Luca Weiss
  • [PATCH 5/5] board/qualcomm: add debug config fragment for MSM8953   Luca Weiss
    • [PATCH 5/5] board/qualcomm: add debug config fragment for MSM8953   Neil Armstrong
• [PATCH 1/5] pinctrl: qcom: sc7280: Fix offset of UFS_RESET   Luca Weiss
  • [PATCH 1/5] pinctrl: qcom: sc7280: Fix offset of UFS_RESET   Neil Armstrong
• [PATCH 2/5] clk/qcom: sm8250: Remove unused defines   Luca Weiss
  • [PATCH 2/5] clk/qcom: sm8250: Remove unused defines   Neil Armstrong
• [PATCH 3/5] serial: msm-geni: Update kconfig name for DEBUG_UART_MSM_GENI   Luca Weiss
  • [PATCH 3/5] serial: msm-geni: Update kconfig name for DEBUG_UART_MSM_GENI   Neil Armstrong
• [PATCH 4/5] doc: board/qualcomm: Clean up debug options for QUP UART   Luca Weiss
  • [PATCH 4/5] doc: board/qualcomm: Clean up debug options for QUP UART   Neil Armstrong
• [PATCH] efi_loader: Cleanup UEFI Variables menu selection   Michal Simek
• [GIT PULL] please pull mmc-power-next-2025-09-24 for next   Peng Fan
  • [GIT PULL] please pull mmc-power-next-2025-09-24 for next   Tom Rini
• Bootstd for sunxi   Simon Glass
  • Bootstd for sunxi   Tom Rini
    • Bootstd for sunxi   Simon Glass
      • Bootstd for sunxi   Tom Rini
      • Bootstd for sunxi   Simon Glass
      • Bootstd for sunxi   Heinrich Schuchardt
• [PATCH] env: fix typo in multiple Kconfig descriptions   Thomas Bonnefille
• [PATCH v6 0/2] Improve disk image detection in efi_bootmgr   Javier Tia
  • [PATCH v6 1/2] part: Export part_driver_lookup_type for external use   Javier Tia
    • [PATCH v6 1/2] part: Export part_driver_lookup_type for external use   Ilias Apalodimas
      • [PATCH v6 1/2] part: Export part_driver_lookup_type for external use   Tom Rini
      • [PATCH v6 1/2] part: Export part_driver_lookup_type for external use   Javier Tia
      • [PATCH v6 1/2] part: Export part_driver_lookup_type for external use   Javier Tia
  • [PATCH v6 2/2] efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
• [RFC v1 0/4] Add upstream boards Milk-V Mars CM and Mars CM Lite   E Shattow
  • [RFC v1 1/4] riscv: dts: starfive: Add Milk-V Mars CM and Mars CM Lite from upstream Linux for-next   E Shattow
  • [RFC v1 2/4] board: starfive: visionfive2: Add Milk-V Mars CM and Mars CM Lite selection by product_id   E Shattow
  • [RFC v1 3/4] riscv: dts: Add placeholder files for pending upstream Milk-V Mars CM and Mars CM Lite   E Shattow
  • [RFC v1 4/4] configs: starfive: Add Milk-V Mars CM and Mars CM Lite to visionfive2   E Shattow
• [PATCH] spi: cadence-qspi: Remove cdns,is-dma property handling   Michal Simek
• [PATCH v7 2/5] bootstd: select BLK rather than depending on it   Stefan Roese
  • [PATCH v7 2/5] bootstd: select BLK rather than depending on it   Tom Rini
    • [PATCH v7 2/5] bootstd: select BLK rather than depending on it   Simon Glass
• [PATCH] usb: fsl-dt-fixup: Return an error code on error   Andrew Goodbody
  • [PATCH] usb: fsl-dt-fixup: Return an error code on error   Marek Vasut
• [PATCH] usb: dwc3: Remove redundant test   Andrew Goodbody
  • [PATCH] usb: dwc3: Remove redundant test   Marek Vasut
    • [PATCH] usb: dwc3: Remove redundant test   Andrew Goodbody
      • [PATCH] usb: dwc3: Remove redundant test   Marek Vasut
      • [PATCH] usb: dwc3: Remove redundant test   Andrew Goodbody
      • [PATCH] usb: dwc3: Remove redundant test   Tom Rini
      • [PATCH] usb: dwc3: Remove redundant test   Konstantin Ryabitsev
      • [PATCH] usb: dwc3: Remove redundant test   Tom Rini
      • [PATCH] usb: dwc3: Remove redundant test   Andrew Goodbody
      • [PATCH] usb: dwc3: Remove redundant test   Tom Rini
• [PATCH] Revert "tools: mkimage: detect overlapping load regions in FIT configurations"   Marek Vasut
  • [PATCH] Revert "tools: mkimage: detect overlapping load regions in FIT configurations"   Tom Rini
    • [PATCH] Revert "tools: mkimage: detect overlapping load regions in FIT configurations"   Marek Vasut
      • [PATCH] Revert "tools: mkimage: detect overlapping load regions in FIT configurations"   Tom Rini
• [PATCH] mkimage: Add help text for bundling TFA BL31 in mkimage -f auto   Marek Vasut
• [PATCH 2/3] am33xx: am3517 evm: Drop old musb AM35X driver   Tom Rini
• [PATCH] MAINTAINERS: update NETWORK and NETWORK (LWIP)   Jerome Forissier
  • [PATCH] MAINTAINERS: update NETWORK and NETWORK (LWIP)   Tom Rini
• [PATCH] Revert "riscv: Add a Zalrsc-only alternative for synchronization in start.S"   Yao Zi
  • [PATCH] Revert "riscv: Add a Zalrsc-only alternative for synchronization in start.S"   E Shattow
    • [PATCH] Revert "riscv: Add a Zalrsc-only alternative for synchronization in start.S"   Yao Zi
  • [PATCH] Revert "riscv: Add a Zalrsc-only alternative for synchronization in start.S"   Leo Liang
• [PATCH 1/4] usb: musb: Remove reference to drivers/usb/musb   Tom Rini
  • [PATCH 2/4] usb: gadget: Tighten the dependency for DWC2 OTG support   Tom Rini
  • [PATCH 3/4] usb: host: xhci: Make U_BOOT_DRIVER entries unique   Tom Rini
  • [PATCH 4/4] usb: gadget: Tighten CI_UDC dependencies   Tom Rini
  • [PATCH 1/4] usb: musb: Remove reference to drivers/usb/musb   Marek Vasut
    • [PATCH 1/4] usb: musb: Remove reference to drivers/usb/musb   Tom Rini
• [PATCH] pci: Remove pcie_intel_fpga driver   Tom Rini
• [PATCH 1/4] arm: socfpga: Tighten a few more driver dependencies   Tom Rini
  • [PATCH 2/4] net: Add SYS_FAULT_MII_ADDR to Kconfig   Tom Rini
    • [PATCH 2/4] net: Add SYS_FAULT_MII_ADDR to Kconfig   Jerome Forissier
  • [PATCH 3/4] net: Remove BOOTP_VENDOREX support   Tom Rini
    • [PATCH 3/4] net: Remove BOOTP_VENDOREX support   Jerome Forissier
  • [PATCH 4/4] net: Tighten more driver dependencies   Tom Rini
    • [PATCH 4/4] net: Tighten more driver dependencies   Ng, Boon Khai
    • [PATCH 4/4] net: Tighten more driver dependencies   Tom Rini
• [PATCH] crypto: tegra: Tighten TEGRA_AES driver dependency   Tom Rini
  • [PATCH] crypto: tegra: Tighten TEGRA_AES driver dependency   Svyatoslav Ryhel
• [PATCH 1/2] test: led: Add missing ';'   Tom Rini
  • [PATCH 2/2] test: syslog: Add missing include of <env.h>   Tom Rini
  • [PATCH 1/2] test: led: Add missing ';'   Christian Marangi
    • [PATCH 1/2] test: led: Add missing ';'   Tom Rini
• [PATCH] Kconfig: Make further use of testing for !COMPILE_TEST   Tom Rini
• [PATCH] spl: Correct dependency for SPL_SYS_REPORT_STACK_F_USAGE   Tom Rini
• [PATCH] NXP: Make RAMBOOT_PBL only be valid for PowerPC or ls1021A   Tom Rini
• [PATCH] sandbox: Add more dummy cache functions   Tom Rini
• [PATCH] cmd: Make CMD_MP depend on the CPU framework being disabled   Tom Rini
• [PATCH] cmd: Update dependencies on CMD_IRQ   Tom Rini
• [PATCH] spl: nand: initialize writesize for am335x   yegorslists at googlemail.com
  • [PATCH] spl: nand: initialize writesize for am335x   Tom Rini
• [PATCH] gpio: aspeed: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH] phy: marvell: Tighten MVEBU_COMPHY_SUPPORT dependencies   Tom Rini
  • [PATCH] phy: marvell: Tighten MVEBU_COMPHY_SUPPORT dependencies   Stefan Roese
• [PATCH] rtc: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH] spmi: sandbox: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH] thermal: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH] tpm: Make U_BOOT_DRIVER entries unique   Tom Rini
• [PATCH v7 0/2] Improve disk image detection in efi_bootmgr   Javier Tia
  • [PATCH v7 1/2] part: Export part_driver_lookup_type for external use   Javier Tia
  • [PATCH v7 2/2] efi_loader: Improve disk image detection in efi_bootmgr   Javier Tia
• [PULL] u-boot-usb/next   Marek Vasut
  • [PULL] u-boot-usb/next   Tom Rini
• [PATCH] MAINTAINERS: Update MMC/POWER/FREESCALE QORIQ   Peng Fan (OSS)
  • [PATCH] MAINTAINERS: Update MMC/POWER/FREESCALE QORIQ   Tom Rini
• [PATCH] arm: baltos: remove obsolete GPMC_NAND_ECC_LP_x8_LAYOUT macro   yegorslists at googlemail.com
• [PATCH] Add symlink from gpl-2.0.txt to a COPYING file   Daniel P. Berrangé
  • [PATCH] Add symlink from gpl-2.0.txt to a COPYING file   Tom Rini
  • [PATCH] Add symlink from gpl-2.0.txt to a COPYING file   Tom Rini
• [PATCH v1] i2c: designware_i2c: Don't warn if reset DT property is not present   bigunclemax at gmail.com
  • [PATCH v1] i2c: designware_i2c: Don't warn if reset DT property is not present   Peng Fan
  • [PATCH v1] i2c: designware_i2c: Don't warn if reset DT property is not present   Heiko Schocher
  • [PATCH v1] i2c: designware_i2c: Don't warn if reset DT property is not present   Tom Rini
• [PATCH] imx9: scmi: Add PCIE ECAM and outbound space to MMU   Ye Li
• [PATCH v5 00/24] Introduce Firmware Update Support for Arm PSA   abdellatif.elkhlifi at arm.com
  • [PATCH v5 01/24] arm_ffa: Add FFA_MEM_SHARE support   abdellatif.elkhlifi at arm.com
  • [PATCH v5 02/24] arm_ffa: Add FFA_MEM_RECLAIM support   abdellatif.elkhlifi at arm.com
  • [PATCH v5 03/24] arm_ffa: sandbox: Replace the emulator error log with debug log   abdellatif.elkhlifi at arm.com
  • [PATCH v5 04/24] arm_ffa: sandbox: Improve the readability of clearing the X registers   abdellatif.elkhlifi at arm.com
  • [PATCH v5 05/24] arm_ffa: sandbox: Add FFA_MEM_SHARE emulation   abdellatif.elkhlifi at arm.com
  • [PATCH v5 06/24] arm_ffa: sandbox: Add FFA_MEM_SHARE tests   abdellatif.elkhlifi at arm.com
  • [PATCH v5 07/24] arm_ffa: sandbox: Add FFA_MEM_RECLAIM emulation   abdellatif.elkhlifi at arm.com
  • [PATCH v5 08/24] arm_ffa: sandbox: Add FFA_MEM_RECLAIM tests   abdellatif.elkhlifi at arm.com
  • [PATCH v5 09/24] fwu_arm_psa: Initialize the update agent   abdellatif.elkhlifi at arm.com
  • [PATCH v5 10/24] fwu_arm_psa: Read the FWU directory through get_image_info()   abdellatif.elkhlifi at arm.com
  • [PATCH v5 11/24] fwu_arm_psa: Add staging ABIs   abdellatif.elkhlifi at arm.com
  • [PATCH v5 12/24] efi_loader: fwu_arm_psa: Add set_image() support   abdellatif.elkhlifi at arm.com
  • [PATCH v5 13/24] efi_loader: fwu_arm_psa: Allow keeping the FMP payload header   abdellatif.elkhlifi at arm.com
  • [PATCH v5 14/24] efi_loader: fwu: fwu_arm_psa: Skip accepting the payload after set_image()   abdellatif.elkhlifi at arm.com
  • [PATCH v5 15/24] efi_loader: fwu: fwu_arm_psa: Disable trial state handling   abdellatif.elkhlifi at arm.com
  • [PATCH v5 16/24] fwu_arm_psa: Add FWU acceptance mechanism   abdellatif.elkhlifi at arm.com
  • [PATCH v5 17/24] fwu_arm_psa: Add ESRT support   abdellatif.elkhlifi at arm.com
  • [PATCH v5 18/24] fwu_arm_psa: Add ExitBootService() notification handler   abdellatif.elkhlifi at arm.com
  • [PATCH v5 19/24] efi_loader: capsule: Add runtime capsule flags checks   abdellatif.elkhlifi at arm.com
  • [PATCH v5 20/24] fwu_arm_psa: corstone1000: Enable FWU support   abdellatif.elkhlifi at arm.com
  • [PATCH v5 21/24] fwu_arm_psa: corstone1000: Perform bank logic when reading boot index   abdellatif.elkhlifi at arm.com
  • [PATCH v5 22/24] fwu_arm_psa: corstone1000: Notify SE Proxy SP on ExitBootService()   abdellatif.elkhlifi at arm.com
  • [PATCH v5 23/24] fwu_arm_psa: corstone1000: Set Boot0001 for on-disk FWU   abdellatif.elkhlifi at arm.com
  • [PATCH v5 24/24] fwu_arm_psa: Document FWU support for Arm PSA   abdellatif.elkhlifi at arm.com
• [PATCH v2 1/5] omap3: evm: Drop old musb omap3 driver   Tom Rini
  • [PATCH v2 2/5] usb: musb: drop musb legacy drivers   Tom Rini
  • [PATCH v2 3/5] usb: gadget: Tighten the dependency for DWC2 OTG support   Tom Rini
    • [PATCH v2 3/5] usb: gadget: Tighten the dependency for DWC2 OTG support   Peter Robinson
    • [PATCH v2 3/5] usb: gadget: Tighten the dependency for DWC2 OTG support   Mattijs Korpershoek
  • [PATCH v2 4/5] usb: host: xhci: Make U_BOOT_DRIVER entries unique   Tom Rini
    • [PATCH v2 4/5] usb: host: xhci: Make U_BOOT_DRIVER entries unique   Peter Robinson
  • [PATCH v2 5/5] usb: gadget: Tighten CI_UDC dependencies   Tom Rini
    • [PATCH v2 5/5] usb: gadget: Tighten CI_UDC dependencies   Mattijs Korpershoek
• [PATCH] include: completion.h: Convert the rest of the dummy functions to macros   Tom Rini
  • [PATCH] include: completion.h: Convert the rest of the dummy functions to macros   Peng Fan
    • [PATCH] include: completion.h: Convert the rest of the dummy functions to macros   Tom Rini
• [PATCH] common: Make MMU_PGPROT depend on !SANDBOX   Tom Rini
  • [PATCH] common: Make MMU_PGPROT depend on !SANDBOX   Peng Fan
• [PATCH] clk: ti: Tighten some TI clock driver dependencies   Tom Rini
• [PATCH] led: Mark LED_STATUS as depending on LED being disabled   Tom Rini
• [PATCH] nand: atmel: Rework ATMEL_EBI and DM_NAND_ATMEL interaction   Tom Rini
• [PATCH] misc: ti: k3: Tighten K3_FUSE dependencies   Tom Rini
• [PATCH] mtd: Tighten some driver dependencies   Tom Rini
• [PATCH] rng: Tighten some rng driver dependencies   Tom Rini
• [PATCH] tee: Rework Makefile logic   Tom Rini
  • [PATCH] tee: Rework Makefile logic   Ilias Apalodimas
• [PATCH] timer: Tighten CADENCE_TTC_TIMER dependencies   Tom Rini
  • [PATCH] timer: Tighten CADENCE_TTC_TIMER dependencies   Michal Simek
• [PATCH] w1-eeprom: Make use of static keyword in drivers   Tom Rini
  • [PATCH] w1-eeprom: Make use of static keyword in drivers   Peng Fan
• [PATCH v8 0/4] bootstd: sunxi: Migrate to standard boot   Simon Glass
  • [PATCH v8 1/4] sunxi: Add a bootmeth for FEL   Simon Glass
  • [PATCH v8 2/4] sunxi: Move to bootstd   Simon Glass
  • [PATCH v8 3/4] sunxi: Drop old distro boot variables   Simon Glass
  • [PATCH v8 4/4] sunxi: Move to text environment   Simon Glass
• [PATCH 00/10] firmware: scmi: various update   Peng Fan (OSS)
  • [PATCH 01/10] firmware: scmi: Typo fix   Peng Fan (OSS)
  • [PATCH 02/10] firmware: scmi: smt: Use io helpers   Peng Fan (OSS)
  • [PATCH 03/10] firmware: scmi: smt: Dump more info   Peng Fan (OSS)
  • [PATCH 04/10] firmware: scmi: Add error code IN_USE   Peng Fan (OSS)
  • [PATCH 05/10] firmware: scmi: use PAGE_SIZE alignment for ARM64   Peng Fan (OSS)
  • [PATCH 06/10] firmware: scmi: mailbox: Update timeout to 30ms   Peng Fan (OSS)
  • [PATCH 07/10] firmware: scmi: mailbox: Support arm,max_rx_timeout_ms   Peng Fan (OSS)
  • [PATCH 08/10] clk: scmi: Replace log_debug with dev_dbg   Peng Fan (OSS)
  • [PATCH 09/10] cmd: scmi: Add pin control protocol name   Peng Fan (OSS)
  • [PATCH 10/10] MAINTAINERS: Add an entry for SCMI   Peng Fan (OSS)
• Transfer List Checksum Correction and Impact on Bloblist   Harrison Mutai
  • Transfer List Checksum Correction and Impact on Bloblist   Raymond Mao
  • Transfer List Checksum Correction and Impact on Bloblist   Tom Rini
    • Transfer List Checksum Correction and Impact on Bloblist   Harrison Mutai
      • Transfer List Checksum Correction and Impact on Bloblist   Tom Rini
• [PATCH] board: rockchip: Add support for rk3588 MNT Reform2   Peter Robinson
• [PATCH v2] board: rockchip: Add support for rk3588 MNT Reform2   Peter Robinson
• [GIT PULL] Please pull u-boot-imx-next-20250926   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-next-20250926   Tom Rini
• [PATCH v5 0/1] rpi: Tidy up booting   Simon Glass
  • [PATCH v5 1/1] rpi: Use the U-Boot control FDT for fdt_addr   Simon Glass
• [MASTER] Pull request efi-2025-10-rc6   Heinrich Schuchardt
  • [MASTER] Pull request efi-2025-10-rc6   Tom Rini
• [NEXT] Pull request doc-next-2025-09-27   Heinrich Schuchardt
  • [NEXT] Pull request doc-next-2025-09-27   Tom Rini
• [PATCH] mmc: sdhci-cadence6: Fix DT property value endianness   Marek Vasut
  • [PATCH] mmc: sdhci-cadence6: Fix DT property value endianness   Tanmay Kathpalia
  • [PATCH] mmc: sdhci-cadence6: Fix DT property value endianness   Peng Fan
• [PATCH] xilinx: Enable sntp command   Michal Simek
  • [PATCH] xilinx: Enable sntp command   Heinrich Schuchardt
    • [PATCH] xilinx: Enable sntp command   Michal Simek
  • [PATCH] xilinx: Enable sntp command   Marek Vasut
    • [PATCH] xilinx: Enable sntp command   Michal Simek
      • [PATCH] xilinx: Enable sntp command   Tom Rini
• [PATCH v2] fastboot: Fix has-slot command always returning yes for fb_nand   Mattijs Korpershoek
  • [PATCH v2] fastboot: Fix has-slot command always returning yes for fb_nand   Mattijs Korpershoek
• [PATCH 5/6] usb: dwc3: gadget: Add delay after software writes DCTL in dwc3_gadget_run_stop()   Mattijs Korpershoek
• [PATCH RESEND] usb: dwc3: Remove redundant test   Andrew Goodbody
  • [PATCH RESEND] usb: dwc3: Remove redundant test   Marek Vasut
    • [PATCH RESEND] usb: dwc3: Remove redundant test   Tom Rini
  • [PATCH RESEND] usb: dwc3: Remove redundant test   Mattijs Korpershoek
  • [PATCH RESEND] usb: dwc3: Remove redundant test   Mattijs Korpershoek
• [PATCH] bloblist: fix missing OR between licenses in the SPDX-License-Identifier   Max Merchel -alt
  • [PATCH] bloblist: fix missing OR between licenses in the SPDX-License-Identifier   Simon Glass
• [PATCH] checkpatch: use python3 to find codespell dictionary   Kory Maincent
  • [PATCH] checkpatch: use python3 to find codespell dictionary   Tom Rini
• [RFC PATCH] link principle license to COPYING   Alex Bennée
  • [RFC PATCH] link principle license to COPYING   Tom Rini
    • [RFC PATCH] link principle license to COPYING   Alex Bennée
• [PATCH] b4-config: configure `b4` for U-Boot   Tom Rini
  • [PATCH] b4-config: configure `b4` for U-Boot   Tom Rini
• [PATCH] usb: gadget: atmel: Add missing null check   Andrew Goodbody
  • [PATCH] usb: gadget: atmel: Add missing null check   Marek Vasut
  • [PATCH] usb: gadget: atmel: Add missing null check   Mattijs Korpershoek
  • [PATCH] usb: gadget: atmel: Add missing null check   Mattijs Korpershoek
• [PATCH] usb: dwc2: Add missing null check   Andrew Goodbody
  • [PATCH] usb: dwc2: Add missing null check   Marek Vasut
  • [PATCH] usb: dwc2: Add missing null check   Mattijs Korpershoek
  • [PATCH] usb: dwc2: Add missing null check   Mattijs Korpershoek
• [PATCH] usb: ehci: exynos: variable node should be signed   Andrew Goodbody
  • [PATCH] usb: ehci: exynos: variable node should be signed   Marek Vasut
• [PATCH] scripts/checkpatch.pl: Resync with v6.17   Kory Maincent
  • [PATCH] scripts/checkpatch.pl: Resync with v6.17   Tom Rini
• [PATCH] net: lwip: ensure alignment of packet buffers   Tim Harvey
  • [PATCH] net: lwip: ensure alignment of packet buffers   Jerome Forissier
    • [PATCH] net: lwip: ensure alignment of packet buffers   Tim Harvey
• [PATCH v2 0/3] Load ASMedia XHCI controller firmware   Mark Kettenis
  • [PATCH v2 1/3] apple: Set up file system firmware loader   Mark Kettenis
    • [PATCH v2 1/3] apple: Set up file system firmware loader   Marek Vasut
      • [PATCH v2 1/3] apple: Set up file system firmware loader   Mark Kettenis
  • [PATCH v2 2/3] iopoll: Add readb_poll_sleep_timeout   Mark Kettenis
    • [PATCH v2 2/3] iopoll: Add readb_poll_sleep_timeout   Tom Rini
  • [PATCH v2 3/3] usb: xhci-pci: Load ASMedia XHCI controller firmware   Mark Kettenis
    • [PATCH v2 3/3] usb: xhci-pci: Load ASMedia XHCI controller firmware   Tom Rini
      • [PATCH v2 3/3] usb: xhci-pci: Load ASMedia XHCI controller firmware   Mark Kettenis
• [PATCH 0/2] docs: Adopt b4 as default patch submission workflow   Javier Tia
  • [PATCH 1/2] doc: Update coding style to recommend b4 for patch submission   Javier Tia
    • [PATCH 1/2] doc: Update coding style to recommend b4 for patch submission   Neil Armstrong
  • [PATCH 2/2] b4-config: Simplify configuration by relying on default b4 maintainer   Javier Tia
    • [PATCH 2/2] b4-config: Simplify configuration by relying on default b4 maintainer   Tom Rini
      • [PATCH 2/2] b4-config: Simplify configuration by relying on default b4 maintainer   Javier Tia
      • [PATCH 2/2] b4-config: Simplify configuration by relying on default b4 maintainer   Tom Rini
• [PATCH v2] doc: Update coding style to recommend b4 for patch submission   Javier Tia
  • [PATCH v2] doc: Update coding style to recommend b4 for patch submission   Neil Armstrong
  • [PATCH v2] doc: Update coding style to recommend b4 for patch submission   Mattijs Korpershoek
• [PATCH] pci: mvebu: Unable to assign mbus windows for 2nd pcie controller   Tony Dinh
  • [PATCH] pci: mvebu: Unable to assign mbus windows for 2nd pcie controller   Stefan Roese
• [PATCH] Revert "fdt: Make sure there is no stale initrd left"   Sam Protsenko
• U-Boot PHY_MSCC vs PHY_VITESSE   Tom Rini
  • U-Boot PHY_MSCC vs PHY_VITESSE   Mathew McBride
    • U-Boot PHY_MSCC vs PHY_VITESSE   Tom Rini
  • U-Boot PHY_MSCC vs PHY_VITESSE   Peng Fan
    • U-Boot PHY_MSCC vs PHY_VITESSE   Tom Rini
  • U-Boot PHY_MSCC vs PHY_VITESSE   Michal Simek
  • U-Boot PHY_MSCC vs PHY_VITESSE   Conor Dooley
    • U-Boot PHY_MSCC vs PHY_VITESSE   Tom Rini
      • U-Boot PHY_MSCC vs PHY_VITESSE   Conor Dooley
• [PATCH v7 00/24] mtd: spinand: driver improvements   Mikhail Kshevetskiy
  • [PATCH v7 02/24] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
  • [PATCH v7 03/24] mtd: nand: Add a NAND page I/O request type   Mikhail Kshevetskiy
  • [PATCH v7 04/24] mtd: spinand: core: add missing MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
  • [PATCH v7 05/24] mtd: spinand: Extend spinand_wait() to match Linux kernel implementation   Mikhail Kshevetskiy
  • [PATCH v7 06/24] mtd: spinand: Make use of spinand_to_[mtd/nand]() helpers   Mikhail Kshevetskiy
  • [PATCH v7 07/24] mtd: spinand: Align logic for enabling ECC to match Linux kernel   Mikhail Kshevetskiy
  • [PATCH v7 08/24] mtd: spinand: Refactor spinand_init* functions   Mikhail Kshevetskiy
  • [PATCH v7 09/24] mtd: spinand: Refactor ECC/OOB functions   Mikhail Kshevetskiy
  • [PATCH v7 10/24] mtd: spinand: Sync core code and device support with Linux 6.10   Mikhail Kshevetskiy
  • [PATCH v7 11/24] mtd: spinand: set bitflip_threshold to 75% of ECC strength   Mikhail Kshevetskiy
  • [PATCH v7 12/24] mtd: spinand: Add support for setting plane select bits   Mikhail Kshevetskiy
  • [PATCH v7 13/24] mtd: spinand: Remove write_enable_op() in markbad()   Mikhail Kshevetskiy
  • [PATCH v7 14/24] mtd: spinand: Introduce a way to avoid raw access   Mikhail Kshevetskiy
  • [PATCH v7 15/24] mtd: spinand: add support of continuous reading mode   Mikhail Kshevetskiy
  • [PATCH v7 16/24] mtd: spinand: Add read retry support   Mikhail Kshevetskiy
  • [PATCH v7 17/24] mtd: spinand: add OTP support   Mikhail Kshevetskiy
  • [PATCH v7 18/24] mtd: spinand: Enhance the logic when picking a variant   Mikhail Kshevetskiy
  • [PATCH v7 19/24] mtd: spinand: propagate spinand_wait() errors from spinand_write_page()   Mikhail Kshevetskiy
  • [PATCH v7 20/24] mtd: spinand: Add a ->configure_chip() hook   Mikhail Kshevetskiy
  • [PATCH v7 21/24] mtd: spinand: Sync core code and device support with Linux 6.17-rc1   Mikhail Kshevetskiy
  • [PATCH v7 22/24] mtd: spinand: fix direct mapping creation sizes   Mikhail Kshevetskiy
  • [PATCH v7 23/24] mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails   Mikhail Kshevetskiy
  • [PATCH v7 24/24] mtd: spinand: repeat reading in regular mode if continuous reading fails   Mikhail Kshevetskiy
  • [PATCH v7 00/24] mtd: spinand: driver improvements   Miquel Raynal
  • [PATCH v7 00/24] mtd: spinand: driver improvements   Michael Nazzareno Trimarchi
• [PATCH v7 01/24] spi: spi-mem: Extend SPI MEM ops to match Linux 6.16   Mikhail Kshevetskiy
• [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC   Michal Simek
  • [PATCH] xilinx: Replace PHY_VITESSE by PHY_MSCC   Tom Rini
• [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   Mattijs Korpershoek
  • [PATCH v4 3/6] bootm: Append bootargs value when bootmeth_android provide cmdline   Mattijs Korpershoek
• [PATCH 0/2] am65-cpsw-nuss phy_interface_t fixup for fixed TX delay   Matthias Schiffer
• [PATCH 1/2] net: mdio-uclass: introduce dm_eth_phy_connect_interface()   Matthias Schiffer
• [PATCH 2/2] net: ethernet: ti: am65-cpsw: fix up PHY mode for fixed RGMII TX delay   Matthias Schiffer
• clk: ti: CLK_TI_CTRL name confusion   Yegor Yefremov
• [PATCH] usb: ohci-hcd: Null check lurb_priv before dereference   Andrew Goodbody
  • [PATCH] usb: ohci-hcd: Null check lurb_priv before dereference   Marek Vasut
    • [PATCH] usb: ohci-hcd: Null check lurb_priv before dereference   Andrew Goodbody
• activity-led usage   Yegor Yefremov
  • activity-led usage   Yegor Yefremov
    • activity-led usage   Simon Glass
      • activity-led usage   Yegor Yefremov
• [PATCH] usb: xhci: exynos: variable node should be signed   Andrew Goodbody
• [PATCH v6 0/2] cmd: mtd: fix benchmarking   Mikhail Kshevetskiy
• [PATCH v6 1/2] cmd: mtd: fix speed measurement in the speed benchmark   Mikhail Kshevetskiy
• [PATCH v6 2/2] cmd: mtd: add benchmark option to the help   Mikhail Kshevetskiy
• [PATCH] doc: develop: fix grammar and syntax   yegorslists at googlemail.com
  • [PATCH] doc: develop: fix grammar and syntax   Simon Glass
• Please pull net-20250930   Jerome Forissier
  • Please pull net-20250930   Tom Rini
• [PATCH v3] doc: Update coding style to recommend b4 for patch submission   Javier Tia
  • [PATCH v3] doc: Update coding style to recommend b4 for patch submission   Mattijs Korpershoek
    • [PATCH v3] doc: Update coding style to recommend b4 for patch submission   Javier Tia
• [PATCH] board: mpfs_icicle: fix pointer assignment in board_fdt_blob_setup()   Tom Rini
  • [PATCH] board: mpfs_icicle: fix pointer assignment in board_fdt_blob_setup()   Jamie Gibbons
    • [PATCH] board: mpfs_icicle: fix pointer assignment in board_fdt_blob_setup()   Tom Rini
  • [PATCH] board: mpfs_icicle: fix pointer assignment in board_fdt_blob_setup()   Conor.Dooley at microchip.com
    • [PATCH] board: mpfs_icicle: fix pointer assignment in board_fdt_blob_setup()   Tom Rini
      • [PATCH] board: mpfs_icicle: fix pointer assignment in board_fdt_blob_setup()   Conor.Dooley at microchip.com
      • [PATCH] board: mpfs_icicle: fix pointer assignment in board_fdt_blob_setup()   Tom Rini
• [PATCH 0/3] usb: musb-new: Address some Smatch issues   Andrew Goodbody
  • [PATCH 1/3] usb: musb-new: Null check before dereference   Andrew Goodbody
  • [PATCH 2/3] usb: musb-new: Limit check array index before use   Andrew Goodbody
  • [PATCH 3/3] usb: musb-new: Cannot test unsigned member to be negative   Andrew Goodbody
• [PATCH] usb: ulpi: Incorrect operator used   Andrew Goodbody
• [PULL] Pull request for u-boot master / v2025.10 = u-boot-stm32-20250930   Patrice CHOTARD
• [PATCH] video: exynos: node variable should not be unsigned   Andrew Goodbody
• [GIT PULL] Please pull u-boot-amlogic-next-20250930   Neil Armstrong