[PATCH v2 0/9] U-Boot Bringup of SM6350 SoC

[Luca Weiss]

Add a clock driver, pinctrl driver for SM6350, and enable support for
this SoC in the SMMU and UFS driver. Add a debug kconfig fragment which
configures the debug UART address.

Finally add support for the PM6150L regulators which is used to get
power on for the SD card.

Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
---
Changes in v2:
- Drop printf from clk driver
- Add patch for spmi gpio (volume-down button)
- Pick up tags
- Rebase on v2025.10-rc4
- Link to v1: https://lore.kernel.org/r/20250618-sm6350-bringup-v1-0-3cc22aab7a7a@fairphone.com

---
Luca Weiss (9):
      clk/qcom: Add SM6350 clock driver
      clk/stub: add sm6350-rpmh clock
      drivers: pinctrl: Add Qualcomm SM6350 TLMM driver
      iommu: qcom-smmu: Add qcom,sm6350-smmu-500 compatible
      phy: qcom: Add SM6350 to QMP UFS PHY driver
      regulator: qcom-rpmh-regulator: add support for pm6150l regulators
      gpio: qcom: Support GPIOs on PM6350 PMIC
      qcom_defconfig: Enable SM6350 clock and pinctrl drivers
      board/qualcomm: add debug config fragment for SM6350

 board/qualcomm/debug-sm6350.config            |   5 +
 configs/qcom_defconfig                        |   2 +
 drivers/clk/clk-stub.c                        |   1 +
 drivers/clk/qcom/Kconfig                      |   8 ++
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/clock-sm6350.c               | 193 ++++++++++++++++++++++++++
 drivers/gpio/qcom_spmi_gpio.c                 |   1 +
 drivers/iommu/qcom-hyp-smmu.c                 |   3 +-
 drivers/phy/qcom/phy-qcom-qmp-ufs.c           |   1 +
 drivers/pinctrl/qcom/Kconfig                  |   7 +
 drivers/pinctrl/qcom/Makefile                 |   1 +
 drivers/pinctrl/qcom/pinctrl-sm6350.c         | 104 ++++++++++++++
 drivers/power/regulator/qcom-rpmh-regulator.c |  31 +++++
 13 files changed, 357 insertions(+), 1 deletion(-)
---
base-commit: 7a4f3c5652157cbb3d26a7728bfe537ea483efc9
change-id: 20250618-sm6350-bringup-08e24e0f8bb2

Best regards,
-- 
Luca Weiss <luca.weiss at fairphone.com>