[PATCH v2] sunxi: extend R528/T113-s3/D1(s) DRAM initialisation

[Andre Przywara]

On Tue, 16 Sep 2025 01:40:26 +0100
Andre Przywara <andre.przywara at arm.com> wrote:

Hi Lukas,

please remember to wait for a bit before sending out a v2, to give other
people time to respond, to the patch itself and also the comments to that.
Given the current U-Boot development state, this is October material, so
there is no real rush.

> On Mon, 15 Sep 2025 21:20:35 +0200
> Lukas Schmid <lukas.schmid at netcube.li> wrote:
> 
> > Extend the DRAM initialisation code to add support for the T113-S4 aka
> > T113M4020DC0 by checking the SoC's CHIPID.
> > 
> > The list of Chip-IDs came from
> > https://github.com/ua1arn/hftrx/blob/25d8cb9e4cfe1d7d0e4a2f641025c88a9ec5e758/inc/clocks.h#L250

I am not sure a random github repo is necessarily a good reference. What's
more important here is our observation that the -s4 chips we have seen use
that identifier, which is different from the -s3 ones.
I wonder if we should include the 0x6800 identifier, since it's apparently
used out there in the wild for some -s4 batches, too?

> > And the chipid register address was something I heard through apritzel
> > altough it seems that, according to Jookia, the Tina Device Tree seems
> > to agree:
> > 
> > sid at 3006000 {
> > 	compatible = "allwinner,sun20iw1p1-sid", "allwinner,sunxi-sid";
> > 	reg = <0x0 0x03006000 0 0x1000>;
> > 	#address-cells = <1>;
> > 	#size-cells = <1>;
> > 
> > 	chipid {
> > 		reg = <0x0 0>;
> > 		offset = <0x200>;
> > 		size = <0x10>;
> > 	};
> > 	...
> > };  
> 

I understand you did this after John's comment, but I am replying here since
it's the newest version of the patch: that's a lot of words for something
that has been widely known for almost a decade now: "The first word of the
SID carries some batch/package information." So I don't think that
deserves some lengthy paragraph, and I would like to avoid proliferating
unreviewed and undocumented BSP DT snippets.

So I think the wording should be more along the line of "certain batches
or packages, identifiable by the SID chip ID, require a different
remapping table".

Cheers,
Andre

> 
> > 
> > Signed-off-by: Lukas Schmid <lukas.schmid at netcube.li>
> > Tested-by: John Watts <contact at jookia.org>
> > Reviewed-by: John Watts <contact at jookia.org>
> > Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>
> > ---
> > Changes in v2:
> >   - Use uint32_t instead of u32 for sid_read_soc_chipid return type
> >   - Add descriptive comment about source of Chip-ID list and register
> > 
> >  drivers/ram/sunxi/dram_sun20i_d1.c | 13 ++++++++++++-
> >  drivers/ram/sunxi/dram_sun20i_d1.h |  7 +++++++
> >  2 files changed, 19 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/ram/sunxi/dram_sun20i_d1.c b/drivers/ram/sunxi/dram_sun20i_d1.c
> > index a1794032f3b..381eeb87e2e 100644
> > --- a/drivers/ram/sunxi/dram_sun20i_d1.c
> > +++ b/drivers/ram/sunxi/dram_sun20i_d1.c
> > @@ -54,6 +54,11 @@ static void sid_read_ldoB_cal(const dram_para_t *para)
> >  	clrsetbits_le32(0x3000150, 0xff00, reg << 8);
> >  }
> >  
> > +static uint32_t sid_read_soc_chipid(void)
> > +{
> > +	return readl(SUNXI_SID_BASE + 0x00) & 0xffff;
> > +}
> > +
> >  static void dram_voltage_set(const dram_para_t *para)
> >  {
> >  	int vol;
> > @@ -663,6 +668,7 @@ static void mctl_phy_ac_remapping(const dram_para_t *para,
> >  
> >  	fuse = (readl(SUNXI_SID_BASE + 0x28) & 0xf00) >> 8;
> >  	debug("DDR efuse: 0x%x\n", fuse);
> > +	debug("SoC Chip ID: 0x%08x\n", sid_read_soc_chipid());
> >  
> >  	if (para->dram_type == SUNXI_DRAM_TYPE_DDR2) {
> >  		if (fuse == 15)
> > @@ -675,7 +681,12 @@ static void mctl_phy_ac_remapping(const dram_para_t *para,
> >  			switch (fuse) {
> >  			case 8: cfg = ac_remapping_tables[2]; break;
> >  			case 9: cfg = ac_remapping_tables[3]; break;
> > -			case 10: cfg = ac_remapping_tables[5]; break;
> > +			case 10:
> > +				if (sid_read_soc_chipid() == SUNXI_CHIPID_T113M4020DC0)
> > +					cfg = ac_remapping_tables[0];
> > +				else
> > +					cfg = ac_remapping_tables[5];
> > +				break;
> >  			case 11: cfg = ac_remapping_tables[4]; break;
> >  			default:
> >  			case 12: cfg = ac_remapping_tables[1]; break;
> > diff --git a/drivers/ram/sunxi/dram_sun20i_d1.h b/drivers/ram/sunxi/dram_sun20i_d1.h
> > index 91383f6cf10..7bd8f67a77a 100644
> > --- a/drivers/ram/sunxi/dram_sun20i_d1.h
> > +++ b/drivers/ram/sunxi/dram_sun20i_d1.h
> > @@ -19,6 +19,13 @@ enum sunxi_dram_type {
> >  	SUNXI_DRAM_TYPE_LPDDR3 = 7,
> >  };
> >  
> > +enum sunxi_soc_chipid {
> > +	SUNXI_CHIPID_F133A = 0x5C00,
> > +	SUNXI_CHIPID_D1S = 0x5E00,
> > +	SUNXI_CHIPID_T113S3 = 0x6000,
> > +	SUNXI_CHIPID_T113M4020DC0 = 0x7200,
> > +};
> > +
> >  /*
> >   * This structure contains a mixture of fixed configuration settings,
> >   * variables that are used at runtime to communicate settings between  
>