[PATCH] imx93_frdm: Add support for flashing board with UUU

[Mathieu Dubois-Briand]

On Thu Sep 11, 2025 at 5:15 PM CEST, Tom Rini wrote:
> On Thu, Sep 11, 2025 at 03:34:28PM +0200, Mathieu Dubois-Briand wrote:
>> Allow to flash a board using NXP UUU utility:
>> - Enable fastboot support on USB.
>> - Add fastboot partition aliases with names used by UUU. Also add extra
>>   environment variables used by UUU.
>> - Set 'dofastboot' environment variable based on boot device
>>   configuration, allowing to automatically enter fastboot when booting
>>   from USB.
>> 
>> Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand at bootlin.com>
>> ---
>>  board/freescale/imx93_frdm/imx93_frdm.c   |  6 ++++++
>>  board/freescale/imx93_frdm/imx93_frdm.env |  8 ++++++++
>>  configs/imx93_frdm_defconfig              | 13 +++++++++++++
>>  3 files changed, 27 insertions(+)
>
> This needs to update doc/board/nxp/imx93_frdm.rst as well, thanks.

Sure, I will update the doc.

Thanks,
Mathieu

-- 
Mathieu Dubois-Briand, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com