[PATCH] usb: musb-new: fix typos

[yegorslists at googlemail.com]

From: Yegor Yefremov <yegorslists at googlemail.com>

Typos found via codespell utility.

Signed-off-by: Yegor Yefremov <yegorslists at googlemail.com>
---
 drivers/usb/musb-new/musb_core.c   | 2 +-
 drivers/usb/musb-new/musb_gadget.c | 4 ++--
 drivers/usb/musb-new/musb_host.c   | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c
index a14b127dc37..17ec0d3acbd 100644
--- a/drivers/usb/musb-new/musb_core.c
+++ b/drivers/usb/musb-new/musb_core.c
@@ -1954,7 +1954,7 @@ musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev,
 
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs and musb->isr if needed,
-	 *   - may initialize an integrated tranceiver
+	 *   - may initialize an integrated transceiver
 	 *   - initializes musb->xceiv, usually by otg_get_phy()
 	 *   - stops powering VBUS
 	 *
diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c
index 08fac829ce7..7daff5850f1 100644
--- a/drivers/usb/musb-new/musb_gadget.c
+++ b/drivers/usb/musb-new/musb_gadget.c
@@ -728,7 +728,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	 * mode 0 only. So we do not get endpoint interrupts due to DMA
 	 * completion. We only get interrupts from DMA controller.
 	 *
-	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * We could operate in DMA mode 1 if we knew the size of the transfer
 	 * in advance. For mass storage class, request->length = what the host
 	 * sends, so that'd work.  But for pretty much everything else,
 	 * request->length is routinely more than what the host sends. For
@@ -1422,7 +1422,7 @@ done:
 }
 
 /*
- * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any
  * data but will queue requests.
  *
  * exported to ep0 code
diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c
index 7528a53d73e..7f296d15984 100644
--- a/drivers/usb/musb-new/musb_host.c
+++ b/drivers/usb/musb-new/musb_host.c
@@ -1862,7 +1862,7 @@ static int musb_schedule(
 			head = &musb->out_bulk;
 
 		/* Enable bulk RX NAK timeout scheme when bulk requests are
-		 * multiplexed.  This scheme doen't work in high speed to full
+		 * multiplexed.  This scheme doesn't work in high speed to full
 		 * speed scenario as NAK interrupts are not coming from a
 		 * full speed device connected to a high speed device.
 		 * NAK timeout interval is 8 (128 uframe or 16ms) for HS and
-- 
2.34.1