[RFC PATCH v2 3/5] arch: mach-k3: Introduce support for AM62D2-EVM

[Paresh Bhagat]

Introduce the basic functions and definitions needed to properly
initialize TI's AM62D2-EVM.

Signed-off-by: Paresh Bhagat <p-bhagat at ti.com>
---
 arch/arm/mach-k3/am62ax/Kconfig | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-k3/am62ax/Kconfig b/arch/arm/mach-k3/am62ax/Kconfig
index f8cdcdca57a..e7ab299fe5d 100644
--- a/arch/arm/mach-k3/am62ax/Kconfig
+++ b/arch/arm/mach-k3/am62ax/Kconfig
@@ -50,9 +50,34 @@ config TARGET_PHYCORE_AM62AX_R5
 	select BINMAN
 	imply SYS_K3_SPL_ATF
 
+config TARGET_AM62D2_A53_EVM
+	bool "TI K3 based AM62D2 EVM running on A53"
+	select ARM64
+	select BINMAN
+	imply BOARD
+	imply SPL_BOARD
+	imply TI_I2C_BOARD_DETECT
+
+config TARGET_AM62D2_R5_EVM
+	bool "TI K3 based AM62D2 EVM running on R5"
+	select CPU_V7R
+	select SYS_THUMB_BUILD
+	select K3_LOAD_SYSFW
+	select RAM
+	select SPL_RAM
+	select K3_DDRSS
+	select BINMAN
+	imply SYS_K3_SPL_ATF
+	imply TI_I2C_BOARD_DETECT
+
 endchoice
 
+if TARGET_AM62A7_A53_EVM || TARGET_AM62A7_R5_EVM
 source "board/ti/am62ax/Kconfig"
 source "board/phytec/phycore_am62ax/Kconfig"
+endif
 
+if TARGET_AM62D2_A53_EVM || TARGET_AM62D2_R5_EVM
+source "board/ti/am62dx/Kconfig"
+endif
 endif
-- 
2.34.1