[PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update

[Yannic Moog]

Hi Jerome,

Am Dienstag, dem 09.09.2025 um 11:58 +0200 schrieb Jerome Forissier:
> Hi Yannic,
> 
> On 9/8/25 08:34, Yannic Moog wrote:
> > Use single make command for compiling blobs and U-Boot.
> > Update the imx firmware version.
> > 
> > Signed-off-by: Yannic Moog <y.moog at phytec.de>
> > ---
> >  doc/board/phytec/imx8mm-phygate-tauri-l.rst | 27 ++++++++++++++--------
> >  doc/board/phytec/phycore-imx8mm.rst         | 28 ++++++++++++++--------
> >  doc/board/phytec/phycore-imx8mp.rst         | 36 +++++++++++++++++---------
> > ---
> >  3 files changed, 56 insertions(+), 35 deletions(-)
> > 
> > diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > index
> > 7efc9392361b4a867ce2bc18db11aacf31208800..4dd82cd9785fa585ed216664a25f593d4e
> > 723dbb 100644
> > --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
> >  
> >     $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
> >     $ cd trusted-firmware-a
> > -   $ export CROSS_COMPILE=aarch64-linux-gnu-
> > -   $ export IMX_BOOT_UART_BASE=0x30880000
> > -   $ make PLAT=imx8mm BL32_BASE=0xbe000000 SPD=opteed bl31
> > +   $ make -j $(nproc) \
> > +          CROSS_COMPILE=aarch64-linux-gnu- \
> > +          PLAT=imx8mm \
> > +          IMX_BOOT_UART_BASE=0x30880000 \
> > +          BL32_BASE=0xbe000000 \
> > +          SPD=opteed \
> > +          bl31
> >  
> >  Build the OP-TEE binary
> >  -----------------------
> > @@ -32,8 +36,9 @@ Build the OP-TEE binary
> >  
> >     $ git clone https://github.com/OP-TEE/optee_os.git
> >     $ cd optee_os
> > -   $ make CFG_TEE_BENCHMARK=n \
> > +   $ make -j $(nproc) \
> >            CROSS_COMPILE=aarch64-linux-gnu- \
> > +          CFG_TEE_BENCHMARK=n \
> 
> This CFG has been removed from optee_os since 4.2.0 and has never been enabled
> by default, so I would think there is no need to set it to n here.

Thanks for the info, will remove it.
Should we remove it from the optee doc as well then?
https://optee.readthedocs.io/en/latest/building/gits/optee_os.html#build-using-gnu-make

Yannic


> 
> Thanks,