[PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update
Jerome Forissier
jerome.forissier at linaro.org
Tue Sep 9 13:16:07 CEST 2025
On 9/9/25 13:12, Yannic Moog wrote:
> Hi Jerome,
>
> Am Dienstag, dem 09.09.2025 um 11:58 +0200 schrieb Jerome Forissier:
>> Hi Yannic,
>>
>> On 9/8/25 08:34, Yannic Moog wrote:
>>> Use single make command for compiling blobs and U-Boot.
>>> Update the imx firmware version.
>>>
>>> Signed-off-by: Yannic Moog <y.moog at phytec.de>
>>> ---
>>> doc/board/phytec/imx8mm-phygate-tauri-l.rst | 27 ++++++++++++++--------
>>> doc/board/phytec/phycore-imx8mm.rst | 28 ++++++++++++++--------
>>> doc/board/phytec/phycore-imx8mp.rst | 36 +++++++++++++++++---------
>>> ---
>>> 3 files changed, 56 insertions(+), 35 deletions(-)
>>>
>>> diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
>>> b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
>>> index
>>> 7efc9392361b4a867ce2bc18db11aacf31208800..4dd82cd9785fa585ed216664a25f593d4e
>>> 723dbb 100644
>>> --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
>>> +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
>>> @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
>>>
>>> $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
>>> $ cd trusted-firmware-a
>>> - $ export CROSS_COMPILE=aarch64-linux-gnu-
>>> - $ export IMX_BOOT_UART_BASE=0x30880000
>>> - $ make PLAT=imx8mm BL32_BASE=0xbe000000 SPD=opteed bl31
>>> + $ make -j $(nproc) \
>>> + CROSS_COMPILE=aarch64-linux-gnu- \
>>> + PLAT=imx8mm \
>>> + IMX_BOOT_UART_BASE=0x30880000 \
>>> + BL32_BASE=0xbe000000 \
>>> + SPD=opteed \
>>> + bl31
>>>
>>> Build the OP-TEE binary
>>> -----------------------
>>> @@ -32,8 +36,9 @@ Build the OP-TEE binary
>>>
>>> $ git clone https://github.com/OP-TEE/optee_os.git
>>> $ cd optee_os
>>> - $ make CFG_TEE_BENCHMARK=n \
>>> + $ make -j $(nproc) \
>>> CROSS_COMPILE=aarch64-linux-gnu- \
>>> + CFG_TEE_BENCHMARK=n \
>>
>> This CFG has been removed from optee_os since 4.2.0 and has never been enabled
>> by default, so I would think there is no need to set it to n here.
>
> Thanks for the info, will remove it.
> Should we remove it from the optee doc as well then?
> https://optee.readthedocs.io/en/latest/building/gits/optee_os.html#build-using-gnu-make
Yes, good catch. I will submit a PR to the docs project [1]
[1] https://github.com/OP-TEE/optee_docs
Thanks,
--
Jerome
>
> Yannic
>
>
>>
>> Thanks,
More information about the U-Boot
mailing list