[PATCH v3 3/3] doc: phytec: imx8m: Style and firmware update
Jerome Forissier
jerome.forissier at linaro.org
Tue Sep 9 11:58:08 CEST 2025
Hi Yannic,
On 9/8/25 08:34, Yannic Moog wrote:
> Use single make command for compiling blobs and U-Boot.
> Update the imx firmware version.
>
> Signed-off-by: Yannic Moog <y.moog at phytec.de>
> ---
> doc/board/phytec/imx8mm-phygate-tauri-l.rst | 27 ++++++++++++++--------
> doc/board/phytec/phycore-imx8mm.rst | 28 ++++++++++++++--------
> doc/board/phytec/phycore-imx8mp.rst | 36 +++++++++++++++++------------
> 3 files changed, 56 insertions(+), 35 deletions(-)
>
> diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> index 7efc9392361b4a867ce2bc18db11aacf31208800..4dd82cd9785fa585ed216664a25f593d4e723dbb 100644
> --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
>
> $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
> $ cd trusted-firmware-a
> - $ export CROSS_COMPILE=aarch64-linux-gnu-
> - $ export IMX_BOOT_UART_BASE=0x30880000
> - $ make PLAT=imx8mm BL32_BASE=0xbe000000 SPD=opteed bl31
> + $ make -j $(nproc) \
> + CROSS_COMPILE=aarch64-linux-gnu- \
> + PLAT=imx8mm \
> + IMX_BOOT_UART_BASE=0x30880000 \
> + BL32_BASE=0xbe000000 \
> + SPD=opteed \
> + bl31
>
> Build the OP-TEE binary
> -----------------------
> @@ -32,8 +36,9 @@ Build the OP-TEE binary
>
> $ git clone https://github.com/OP-TEE/optee_os.git
> $ cd optee_os
> - $ make CFG_TEE_BENCHMARK=n \
> + $ make -j $(nproc) \
> CROSS_COMPILE=aarch64-linux-gnu- \
> + CFG_TEE_BENCHMARK=n \
This CFG has been removed from optee_os since 4.2.0 and has never been enabled
by default, so I would think there is no need to set it to n here.
Thanks,
--
Jerome
> O=out/arm \
> PLATFORM=imx-mx8mm_phygate_tauri_l
>
> @@ -42,9 +47,9 @@ Get the ddr firmware
>
> .. code-block:: bash
>
> - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.23.bin
> - $ chmod +x firmware-imx-8.23.bin
> - $ ./firmware-imx-8.23.bin
> + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin
> + $ chmod +x firmware-imx-8.28-994fa14.bin
> + $ ./firmware-imx-8.28-994fa14.bin
>
> Build U-Boot for SD card
> ------------------------
> @@ -56,15 +61,17 @@ Copy binaries
>
> $ cp <TF-A dir>/build/imx8mm/release/bl31.bin .
> $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
> - $ cp firmware-imx-8.23/firmware/ddr/synopsys/lpddr4*.bin .
> + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin .
>
> Build U-Boot
> ^^^^^^^^^^^^
>
> .. code-block:: bash
>
> - $ make imx8mm-phygate-tauri-l_defconfig
> - $ make flash.bin
> + $ make -j $(nproc)
> + CROSS_COMPILE=aarch64-linux-gnu- \
> + imx8mm-phygate-tauri-l_defconfig \
> + flash.bin
>
> Flash SD card
> ^^^^^^^^^^^^^
> diff --git a/doc/board/phytec/phycore-imx8mm.rst b/doc/board/phytec/phycore-imx8mm.rst
> index ba6299a968ae9980d583b87b46dcccba5aa4a186..d5edbc91474e95f677dd12e5fcc6c16092dea1cd 100644
> --- a/doc/board/phytec/phycore-imx8mm.rst
> +++ b/doc/board/phytec/phycore-imx8mm.rst
> @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
>
> $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
> $ cd trusted-firmware-a
> - $ export CROSS_COMPILE=aarch64-linux-gnu-
> - $ export IMX_BOOT_UART_BASE=0x30880000
> - $ make PLAT=imx8mm BL32_BASE=0x7e000000 SPD=opteed bl31
> + $ make -j $(nproc) \
> + CROSS_COMPILE=aarch64-linux-gnu- \
> + PLAT=imx8mm \
> + IMX_BOOT_UART_BASE=0x30880000 \
> + BL32_BASE=0x7e000000 \
> + SPD=opteed \
> + bl31
>
> Build the OP-TEE binary
> -----------------------
> @@ -32,8 +36,9 @@ Build the OP-TEE binary
>
> $ git clone https://github.com/OP-TEE/optee_os.git
> $ cd optee_os
> - $ make CFG_TEE_BENCHMARK=n \
> + $ make -j $(nproc) \
> CROSS_COMPILE=aarch64-linux-gnu- \
> + CFG_TEE_BENCHMARK=n \
> O=out/arm \
> PLATFORM=imx-mx8mm_phyboard_polis
>
> @@ -42,9 +47,9 @@ Get the ddr firmware
>
> .. code-block:: bash
>
> - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin
> - $ chmod +x firmware-imx-8.19.bin
> - $ ./firmware-imx-8.19.bin
> + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin
> + $ chmod +x firmware-imx-8.28-994fa14.bin
> + $ ./firmware-imx-8.28-994fa14.bin
>
> Build U-Boot for SD card
> ------------------------
> @@ -55,15 +60,18 @@ Copy binaries
> .. code-block:: bash
>
> $ cp <TF-A dir>/build/imx8mm/release/bl31.bin .
> - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
> + $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
> + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin .
>
> Build U-Boot
> ^^^^^^^^^^^^
>
> .. code-block:: bash
>
> - $ make phycore-imx8mm_defconfig
> - $ make flash.bin
> + $ make -j $(nproc) \
> + CROSS_COMPILE=aarch64-linux-gnu- \
> + phycore-imx8mm_defconfig \
> + flash.bin
>
> Flash SD card
> ^^^^^^^^^^^^^
> diff --git a/doc/board/phytec/phycore-imx8mp.rst b/doc/board/phytec/phycore-imx8mp.rst
> index e1385be25e1a862db7021e29cd5d0d3ba68cc01b..8995a2965328dc645fd29ad979e399bf7652106c 100644
> --- a/doc/board/phytec/phycore-imx8mp.rst
> +++ b/doc/board/phytec/phycore-imx8mp.rst
> @@ -3,7 +3,7 @@
> phyCORE-i.MX 8M Plus
> ====================
>
> -The phyCORE-i.MX 8M Plus with 2GB of main memory is supported.
> +The phyCORE-i.MX 8M Plus with 1,2,4GB of main memory is supported.
>
> Quick Start
> -----------
> @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
>
> $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
> $ cd trusted-firmware-a
> - $ export CROSS_COMPILE=aarch64-linux-gnu-
> - $ export IMX_BOOT_UART_BASE=0x30860000
> - $ make PLAT=imx8mp BL32_BASE=0x7e000000 SPD=opteed bl31
> + $ make -j $(nproc) \
> + CROSS_COMPILE=aarch64-linux-gnu- \
> + PLAT=imx8mp \
> + IMX_BOOT_UART_BASE=0x30860000 \
> + BL32_BASE=0x7e000000 \
> + SPD=opteed \
> + bl31
>
> Build the OP-TEE binary
> -----------------------
> @@ -32,20 +36,20 @@ Build the OP-TEE binary
>
> $ git clone https://github.com/OP-TEE/optee_os.git
> $ cd optee_os
> - $ make CFG_TEE_BENCHMARK=n \
> - CROSS_COMPILE=aarch64-linux-gnu- \
> - O=out/arm \
> - PLATFORM=imx-mx8mp_phyboard_pollux \
> - CFG_TZDRAM_START=0x7e000000
> + $ make -j $(nproc) \
> + CROSS_COMPILE=aarch64-linux-gnu- \
> + CFG_TEE_BENCHMARK=n \
> + O=out/arm \
> + PLATFORM=imx-mx8mp_phyboard_pollux
>
> Get the ddr firmware
> --------------------
>
> .. code-block:: bash
>
> - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin
> - $ chmod +x firmware-imx-8.19.bin
> - $ ./firmware-imx-8.19.bin
> + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin
> + $ chmod +x firmware-imx-8.28-994fa14.bin
> + $ ./firmware-imx-8.28-994fa14.bin
>
> Build U-Boot for SD card
> ------------------------
> @@ -57,15 +61,17 @@ Copy binaries
>
> $ cp <TF-A dir>/build/imx8mp/release/bl31.bin .
> $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
> - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
> + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin .
>
> Build U-Boot
> ^^^^^^^^^^^^
>
> .. code-block:: bash
>
> - $ make phycore-imx8mp_defconfig
> - $ make flash.bin
> + $ make -j $(nproc) \
> + CROSS_COMPILE=aarch64-linux-gnu- \
> + phycore-imx8mp_defconfig \
> + flash.bin
>
> Flash SD card
> ^^^^^^^^^^^^^
>
More information about the U-Boot
mailing list