[PATCH v4 3/3] doc: phytec: imx8m: Style and firmware update
Yannic Moog
y.moog at phytec.de
Tue Sep 9 16:05:41 CEST 2025
Use single make command for compiling blobs and U-Boot.
Update the imx firmware version.
Signed-off-by: Yannic Moog <y.moog at phytec.de>
---
doc/board/phytec/imx8mm-phygate-tauri-l.rst | 27 ++++++++++++++---------
doc/board/phytec/phycore-imx8mm.rst | 28 +++++++++++++++---------
doc/board/phytec/phycore-imx8mp.rst | 34 +++++++++++++++++------------
3 files changed, 55 insertions(+), 34 deletions(-)
diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
index 7efc9392361b4a867ce2bc18db11aacf31208800..4dd82cd9785fa585ed216664a25f593d4e723dbb 100644
--- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
+++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
@@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
- $ export CROSS_COMPILE=aarch64-linux-gnu-
- $ export IMX_BOOT_UART_BASE=0x30880000
- $ make PLAT=imx8mm BL32_BASE=0xbe000000 SPD=opteed bl31
+ $ make -j $(nproc) \
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ PLAT=imx8mm \
+ IMX_BOOT_UART_BASE=0x30880000 \
+ BL32_BASE=0xbe000000 \
+ SPD=opteed \
+ bl31
Build the OP-TEE binary
-----------------------
@@ -32,8 +36,9 @@ Build the OP-TEE binary
$ git clone https://github.com/OP-TEE/optee_os.git
$ cd optee_os
- $ make CFG_TEE_BENCHMARK=n \
+ $ make -j $(nproc) \
CROSS_COMPILE=aarch64-linux-gnu- \
+ CFG_TEE_BENCHMARK=n \
O=out/arm \
PLATFORM=imx-mx8mm_phygate_tauri_l
@@ -42,9 +47,9 @@ Get the ddr firmware
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.23.bin
- $ chmod +x firmware-imx-8.23.bin
- $ ./firmware-imx-8.23.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin
+ $ chmod +x firmware-imx-8.28-994fa14.bin
+ $ ./firmware-imx-8.28-994fa14.bin
Build U-Boot for SD card
------------------------
@@ -56,15 +61,17 @@ Copy binaries
$ cp <TF-A dir>/build/imx8mm/release/bl31.bin .
$ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
- $ cp firmware-imx-8.23/firmware/ddr/synopsys/lpddr4*.bin .
+ $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin .
Build U-Boot
^^^^^^^^^^^^
.. code-block:: bash
- $ make imx8mm-phygate-tauri-l_defconfig
- $ make flash.bin
+ $ make -j $(nproc)
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ imx8mm-phygate-tauri-l_defconfig \
+ flash.bin
Flash SD card
^^^^^^^^^^^^^
diff --git a/doc/board/phytec/phycore-imx8mm.rst b/doc/board/phytec/phycore-imx8mm.rst
index ba6299a968ae9980d583b87b46dcccba5aa4a186..d5edbc91474e95f677dd12e5fcc6c16092dea1cd 100644
--- a/doc/board/phytec/phycore-imx8mm.rst
+++ b/doc/board/phytec/phycore-imx8mm.rst
@@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
- $ export CROSS_COMPILE=aarch64-linux-gnu-
- $ export IMX_BOOT_UART_BASE=0x30880000
- $ make PLAT=imx8mm BL32_BASE=0x7e000000 SPD=opteed bl31
+ $ make -j $(nproc) \
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ PLAT=imx8mm \
+ IMX_BOOT_UART_BASE=0x30880000 \
+ BL32_BASE=0x7e000000 \
+ SPD=opteed \
+ bl31
Build the OP-TEE binary
-----------------------
@@ -32,8 +36,9 @@ Build the OP-TEE binary
$ git clone https://github.com/OP-TEE/optee_os.git
$ cd optee_os
- $ make CFG_TEE_BENCHMARK=n \
+ $ make -j $(nproc) \
CROSS_COMPILE=aarch64-linux-gnu- \
+ CFG_TEE_BENCHMARK=n \
O=out/arm \
PLATFORM=imx-mx8mm_phyboard_polis
@@ -42,9 +47,9 @@ Get the ddr firmware
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin
- $ chmod +x firmware-imx-8.19.bin
- $ ./firmware-imx-8.19.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin
+ $ chmod +x firmware-imx-8.28-994fa14.bin
+ $ ./firmware-imx-8.28-994fa14.bin
Build U-Boot for SD card
------------------------
@@ -55,15 +60,18 @@ Copy binaries
.. code-block:: bash
$ cp <TF-A dir>/build/imx8mm/release/bl31.bin .
- $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
+ $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
+ $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin .
Build U-Boot
^^^^^^^^^^^^
.. code-block:: bash
- $ make phycore-imx8mm_defconfig
- $ make flash.bin
+ $ make -j $(nproc) \
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ phycore-imx8mm_defconfig \
+ flash.bin
Flash SD card
^^^^^^^^^^^^^
diff --git a/doc/board/phytec/phycore-imx8mp.rst b/doc/board/phytec/phycore-imx8mp.rst
index df087072062a0b8ca2179fecaead4fa3d0b9eff4..0252cbd08249fa37e979e13bb5ffac9c2b7bb723 100644
--- a/doc/board/phytec/phycore-imx8mp.rst
+++ b/doc/board/phytec/phycore-imx8mp.rst
@@ -3,7 +3,7 @@
phyCORE-i.MX 8M Plus
====================
-The phyCORE-i.MX 8M Plus with 2GB of main memory is supported.
+The phyCORE-i.MX 8M Plus with 1,2,4GB of main memory is supported.
Quick Start
-----------
@@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
$ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
$ cd trusted-firmware-a
- $ export CROSS_COMPILE=aarch64-linux-gnu-
- $ export IMX_BOOT_UART_BASE=0x30860000
- $ make PLAT=imx8mp BL32_BASE=0x7e000000 SPD=opteed bl31
+ $ make -j $(nproc) \
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ PLAT=imx8mp \
+ IMX_BOOT_UART_BASE=0x30860000 \
+ BL32_BASE=0x7e000000 \
+ SPD=opteed \
+ bl31
Build the OP-TEE binary
-----------------------
@@ -32,19 +36,19 @@ Build the OP-TEE binary
$ git clone https://github.com/OP-TEE/optee_os.git
$ cd optee_os
- $ make CROSS_COMPILE=aarch64-linux-gnu- \
- O=out/arm \
- PLATFORM=imx-mx8mp_phyboard_pollux \
- CFG_TZDRAM_START=0x7e000000
+ $ make -j $(nproc) \
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ O=out/arm \
+ PLATFORM=imx-mx8mp_phyboard_pollux
Get the ddr firmware
--------------------
.. code-block:: bash
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin
- $ chmod +x firmware-imx-8.19.bin
- $ ./firmware-imx-8.19.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin
+ $ chmod +x firmware-imx-8.28-994fa14.bin
+ $ ./firmware-imx-8.28-994fa14.bin
Build U-Boot for SD card
------------------------
@@ -56,15 +60,17 @@ Copy binaries
$ cp <TF-A dir>/build/imx8mp/release/bl31.bin .
$ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
- $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
+ $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin .
Build U-Boot
^^^^^^^^^^^^
.. code-block:: bash
- $ make phycore-imx8mp_defconfig
- $ make flash.bin
+ $ make -j $(nproc) \
+ CROSS_COMPILE=aarch64-linux-gnu- \
+ phycore-imx8mp_defconfig \
+ flash.bin
Flash SD card
^^^^^^^^^^^^^
--
2.43.0
More information about the U-Boot
mailing list