[PATCH 8/8] imx95_evk: Enable PCI host controller on iMX95 19x19 EVK

[Ye Li]

Enable DW IMX PCI driver and iMX95 BLKCTRL clock driver in defconfig,
so PCI controller can work.

Signed-off-by: Ye Li <ye.li at nxp.com>
---
 configs/imx95_19x19_evk_defconfig | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/configs/imx95_19x19_evk_defconfig b/configs/imx95_19x19_evk_defconfig
index 73818a826273..f0a31dbda7ba 100644
--- a/configs/imx95_19x19_evk_defconfig
+++ b/configs/imx95_19x19_evk_defconfig
@@ -94,15 +94,12 @@ CONFIG_ETHPRIME="eth0"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SYS_RX_ETH_BUFFER=8
 CONFIG_SPL_DM=y
-CONFIG_REGMAP=y
-CONFIG_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_SPL_CLK_CCF=y
-CONFIG_CLK_CCF=y
 CONFIG_CLK_SCMI=y
 CONFIG_SPL_CLK_SCMI=y
+CONFIG_CLK_IMX95_BLKCTRL=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_SPL_FIRMWARE=y
@@ -130,13 +127,13 @@ CONFIG_DM_MDIO=y
 CONFIG_MII=y
 CONFIG_FSL_ENETC=y
 CONFIG_PCIE_ECAM_GENERIC=y
+CONFIG_PCIE_DW_IMX=y
 CONFIG_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX_SCMI=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_SCMI_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
 CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_SPL_DM_REGULATOR_FIXED=y
-- 
2.7.4