[PATCH 7/8] arm: dts: imx95-evk: set alias for enetc PCI buses

[Ye Li]

Use fixed seq 0 and 1 for enetc PCI buses, then the seq for PCI controllers
could start after them.

Signed-off-by: Ye Li <ye.li at nxp.com>
---
 arch/arm/dts/imx95-19x19-evk-u-boot.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi b/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi
index 2d1f02baa5f6..8b59831b7ca0 100644
--- a/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx95-19x19-evk-u-boot.dtsi
@@ -5,6 +5,13 @@
 
 #include "imx95-u-boot.dtsi"
 
+/ {
+	aliases {
+		pci0 = &netc_bus0;
+		pci1 = &netc_bus1;
+	};
+};
+
 &lpuart1 {
 	bootph-pre-ram;
 };
-- 
2.7.4