[PATCH v3] doc: Update mentions of README.fdt-control

[E Shattow]

Update documents 'README.fdt-control' reference to replacement 'control.rst':
  doc/arch/nios2.rst
  dts/Makefile

Also convert some adjacent pathname mentions to rST links where applicable

Fixes: 3e9fddfc4f14 "doc: Move devicetree control doc to rST"
Signed-off-by: E Shattow <e at freeshell.de>
---

Changes since v2: Use document reference instead of adding per-doc ref.

Changes since v1: Use per-doc ref to add reST links where applicable.

---
 doc/arch/nios2.rst                    | 2 +-
 doc/develop/devicetree/control.rst    | 2 +-
 doc/develop/driver-model/ethernet.rst | 2 +-
 doc/develop/spl.rst                   | 2 +-
 doc/usage/fit/overlay-fdt-boot.rst    | 2 +-
 dts/Makefile                          | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/doc/arch/nios2.rst b/doc/arch/nios2.rst
index 34a75e7fb00..90b4ddf387b 100644
--- a/doc/arch/nios2.rst
+++ b/doc/arch/nios2.rst
@@ -13,7 +13,7 @@ Please refer to the link for Linux port and toolchains:
 http://rocketboards.org/foswiki/view/Documentation/NiosIILinuxUserManual
 
 The Nios II port of u-boot is controlled by device tree. Please check
-out doc/README.fdt-control.
+out :doc:`/develop/devicetree/control`.
 
 To add a new board/configuration (eg, mysystem) to u-boot, you will need
 three files.
diff --git a/doc/develop/devicetree/control.rst b/doc/develop/devicetree/control.rst
index 0233945f8b6..8811e1d5c23 100644
--- a/doc/develop/devicetree/control.rst
+++ b/doc/develop/devicetree/control.rst
@@ -282,7 +282,7 @@ U-Boot can be divided into three phases: TPL, SPL and U-Boot proper.
 
 The full devicetree is available to U-Boot proper, but normally only a subset
 (or none at all) is available to TPL and SPL. See 'Pre-Relocation Support' and
-'SPL Support' in doc/driver-model/design.rst for more details.
+'SPL Support' in :doc:`/develop/driver-model/design` for more details.
 
 
 Using several DTBs in the SPL (SPL_MULTI_DTB_FIT Kconfig option)
diff --git a/doc/develop/driver-model/ethernet.rst b/doc/develop/driver-model/ethernet.rst
index 73c3a728dbf..2e1df744d4a 100644
--- a/doc/develop/driver-model/ethernet.rst
+++ b/doc/develop/driver-model/ethernet.rst
@@ -8,7 +8,7 @@ own ethernet device driver.  Here we will describe a new pseudo 'APE' driver.
 
 Most existing drivers do already - and new network driver MUST - use the
 U-Boot core driver model. Generic information about this can be found in
-doc/driver-model/design.rst, this document will thus focus on the network
+:doc:`/develop/driver-model/design`, this document will thus focus on the network
 specific code parts.
 Some drivers are still using the old Ethernet interface, differences between
 the two and hints about porting will be handled at the end.
diff --git a/doc/develop/spl.rst b/doc/develop/spl.rst
index 7f2eac50806..08b51172014 100644
--- a/doc/develop/spl.rst
+++ b/doc/develop/spl.rst
@@ -145,7 +145,7 @@ fdtgrep is also used to remove:
   'bootph-verify' (VPL))
 
 All the nodes remaining in the SPL devicetree are bound
-(see doc/driver-model/design.rst).
+(see :doc:`/develop/driver-model/design`).
 
 NOTE: U-Boot migrated to a new schema for the u-boot,dm-* tags in 2023. Please
 update to use the new bootph-* tags as described in the
diff --git a/doc/usage/fit/overlay-fdt-boot.rst b/doc/usage/fit/overlay-fdt-boot.rst
index 3d7296ad913..d687e98ea2a 100644
--- a/doc/usage/fit/overlay-fdt-boot.rst
+++ b/doc/usage/fit/overlay-fdt-boot.rst
@@ -13,7 +13,7 @@ that matches the desired configuration.
 
 This document focuses on specifically using overlays as part of a FIT image.
 General information regarding overlays including its syntax and building it
-can be found in doc/README.fdt-overlays
+can be found in :doc:`/usage/fdt_overlays`
 
 Configuration without overlays
 ------------------------------
diff --git a/dts/Makefile b/dts/Makefile
index 86bf8dc2156..fd4ae31a533 100644
--- a/dts/Makefile
+++ b/dts/Makefile
@@ -3,7 +3,7 @@
 # Copyright (c) 2011 The Chromium OS Authors.
 
 # This Makefile builds the internal U-Boot fdt if CONFIG_OF_CONTROL is
-# enabled. See doc/README.fdt-control for more details.
+# enabled. See doc/develop/devicetree/control.rst for more details.
 
 DEVICE_TREE ?= $(CONFIG_DEFAULT_DEVICE_TREE:"%"=%)
 ifeq ($(DEVICE_TREE),)

base-commit: 2f2ab7e13a69367cc9b88a45899e24dba02667c6
-- 
2.50.0