[RFC PATCH v3 0/1] Add initial support for AM62D2-EVM

[Paresh Bhagat]

The AM62D2 SoC, part of the K3 architecture, is built for high-performance
DSP tasks in automotive audio, pro audio, radar, sonar, and medical
imaging. It features up to four Cortex-A53 cores (1.4GHz), two Cortex-R5F
cores, and a C7x DSP with 2 TOPS MMA. Key interfaces include multi-channel
McASP audio, TSN-capable Gigabit Ethernet, and a range of peripherals
(UART, SPI, I2C, CAN, USB, eMMC/SD, OSPI, CSI). It supports LPDDR4/DDR4,
secure boot with hardware security, and low-power modes with
CAN/GPIO/UART wakeup.

AM62D2-EVM evaluation module (EVM) is a low-cost expandable platform
board designed for AM62D2 SoC from TI. It supports the following
interfaces:

* 4 GB LPDDR4 RAM
* x2 Gigabit Ethernet expansion connectors
* x4 3.5mm TRS Audio Jack Line In
* x4 3.5mm TRS Audio Jack Line Out
* x2 Audio expansion connectors
* x1 Type-A USB 2.0, x1 Type-C dual-role device (DRD) USB 2.0
* x1 UHS-1 capable micro SD card slot
* 32 GB eMMC Flash
* 512 Mb OSPI NOR flash
* x4 UARTs via USB 2.0-B
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs

Also resuse Soc specific files from AM62A. A key distinction from AM62A
is that the AM62D does not include multimedia components such as the
video encoder/decoder, MJPEG encoder, Vision Processing Accelerator
(VPAC) for image signal processing, or the display subsystem.
Additionally, the AM62D has a different pin configuration compared to
the AM62A.

Technical Reference Manual - https://www.ti.com/lit/pdf/sprujd4
Schematics Link - https://www.ti.com/lit/zip/sprcal5

Branch used-next

Kernel Patch
https://lore.kernel.org/all/20250708085839.1498505-1-p-bhagat@ti.com/

Boot Logs
https://gist.github.com/paresh-bhagat12/6e169340c222427c7648b1ef3ca5067f

Change Log:
	v2->v3:
		- Squash commits.
		- Reuse yaml files from am62d.

	v1->v2:
		- Restruture the commits (verified am62a build for each)
		- Removed unsigned nodes from binman dts.

v2-https://lore.kernel.org/all/20250909053429.444854-1-p-bhagat@ti.com/
v1-https://lore.kernel.org/all/20250902060703.191688-1-p-bhagat@ti.com/

Paresh Bhagat (1):
  Add initial support for AM62D2-EVM

 arch/arm/dts/Makefile                        |    2 +
 arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi | 2802 ++++++++++++++++++
 arch/arm/dts/k3-am62d-evm-binman.dtsi        |  314 ++
 arch/arm/dts/k3-am62d2-evm-u-boot.dtsi       |   13 +
 arch/arm/dts/k3-am62d2-r5-evm.dts            |   82 +
 arch/arm/mach-k3/am62ax/Kconfig              |   21 +
 board/ti/am62dx/Kconfig                      |   26 +
 board/ti/am62dx/MAINTAINERS                  |    8 +
 board/ti/am62dx/Makefile                     |    7 +
 board/ti/am62dx/am62dx.env                   |   21 +
 board/ti/am62dx/evm.c                        |   37 +
 configs/am62dx_evm_a53_defconfig             |   22 +
 configs/am62dx_evm_r5_defconfig              |   20 +
 13 files changed, 3375 insertions(+)
 create mode 100644 arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi
 create mode 100644 arch/arm/dts/k3-am62d-evm-binman.dtsi
 create mode 100644 arch/arm/dts/k3-am62d2-evm-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-am62d2-r5-evm.dts
 create mode 100644 board/ti/am62dx/Kconfig
 create mode 100644 board/ti/am62dx/MAINTAINERS
 create mode 100644 board/ti/am62dx/Makefile
 create mode 100644 board/ti/am62dx/am62dx.env
 create mode 100644 board/ti/am62dx/evm.c
 create mode 100644 configs/am62dx_evm_a53_defconfig
 create mode 100644 configs/am62dx_evm_r5_defconfig

-- 
2.34.1