[RFC 02/10] riscv: dts: starfive: Add VisionFive 2 Lite board device tree

[Hal Feng]

> On 03.09.25 19:07, Sumit Garg wrote:
> On Tue, Sep 02, 2025 at 01:03:09PM -0700, E Shattow wrote:
> > Hi Hal,
> >
> > On 8/28/25 23:09, Hal Feng wrote:
> > > VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.
> > >
> > > Board features:
> > > - JH7110S SoC
> > > - 2/4/8 GiB LPDDR4 DRAM
> > > - AXP15060 PMIC
> > > - 40 pin GPIO header
> > > - 1x USB 3.0 host port
> > > - 3x USB 2.0 host port
> > > - 1x M.2 M-Key (size: 2242)
> > > - 1x MicroSD slot (optional non-removable eMMC)
> > > - 1x QSPI Flash
> > > - 1x I2C EEPROM
> > > - 1x 1Gbps Ethernet port
> > > - SDIO-based Wi-Fi & UART-based Bluetooth
> > > - 1x HDMI port
> > > - 1x 2-lane DSI
> > > - 1x 2-lane CSI
> > >
> >
> > Prefer to see subject line and URL of recent upstream discussion or
> > git web commit for the new or modified dts changes from upstream of
> > devicetree-rebasing in this commit and not just in the cover letter.
> >
> > + From upstream LKML discussion "[RFC 3/3] riscv: dts: starfive: Add
> > VisionFive 2 Lite board device tree" [1].
> > + 1:
> > https://lore.kernel.org/all/20250821100930.71404-4-hal.feng@starfivete
> > ch.com/
> >
> > > Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> > > ---
> > >  .../jh7110s-starfive-visionfive-2-lite.dts    | 152 ++++++++++++++++++
> > >  1 file changed, 152 insertions(+)
> > >  create mode 100644
> > > dts/upstream/src/riscv/starfive/jh7110s-starfive-visionfive-2-lite.d
> > > ts
> > >
> > > diff --git
> > > a/dts/upstream/src/riscv/starfive/jh7110s-starfive-visionfive-2-lite
> > > .dts
> > > b/dts/upstream/src/riscv/starfive/jh7110s-starfive-visionfive-2-lite
> > > .dts
> > > new file mode 100644
> > > index 00000000000..a0cb9912eb8
> > > --- /dev/null
> > > +++ b/dts/upstream/src/riscv/starfive/jh7110s-starfive-visionfive-2-
> > > +++ lite.dts
> >
> > No, do not directly add or modify upstream dts in dts/upstream/src
> > subtree. We are not permitted in U-Boot to merge out-of-band
> > devicetree changes to the devicetree-rebasing subtree as this creates
> > more work for Tom, if I understand correctly?
> >
> > Instead add or modify this dts as
> > arch/riscv/dts/jh7110s-starfive-visionfive-2-lite-u-boot.dtsi filename.
> 
> That's right. dts/upstream subtree isn't allowed to be directly patched but it is
> rather synced regularly with devicetree-rebasing. So please follow
> documentation documentation here [1].
> 
> [1] https://docs.u-
> boot.org/en/latest/develop/devicetree/control.html#resyncing-with-
> devicetree-rebasing

Please ignore patch 1 and patch 2 and don't merge them into u-boot.
I  had noted it in the cover-letter. To be clearer, I will point it out in the
commit messages next time.

The reason to add these two patches is that it will fail to compile without
these two patches and be more convenient for the developers to test the
series.

Best regards,
Hal