[PATCH 4/5] doc: board/qualcomm: Clean up debug options for QUP UART

[Luca Weiss]

CONFIG_BAUDRATE is not relevant for the QUP driver, and neither is
CONFIG_DEBUG_UART_SKIP_INIT so remove them from the doc.

Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
---
 doc/board/qualcomm/debugging.rst | 2 --
 1 file changed, 2 deletions(-)

diff --git a/doc/board/qualcomm/debugging.rst b/doc/board/qualcomm/debugging.rst
index c3289c9e4e346058943afd9c803cc44426841544..42821f6546c6425c4b55e1f89501b94bbf9d0623 100644
--- a/doc/board/qualcomm/debugging.rst
+++ b/doc/board/qualcomm/debugging.rst
@@ -42,7 +42,6 @@ Older boards (db410c and db820c)
 
 Open ``configs/dragonboard<BOARD>_defconfig``
 
-	CONFIG_BAUDRATE=115200
 	CONFIG_DEBUG_UART=y
 	CONFIG_DEBUG_UART_ANNOUNCE=y
 	# db410c - 0x78b0000
@@ -50,7 +49,6 @@ Open ``configs/dragonboard<BOARD>_defconfig``
 	CONFIG_DEBUG_UART_BASE=0x75b0000
 	CONFIG_DEBUG_UART_MSM=y
 	CONFIG_DEBUG_UART_CLOCK=7372800
-	#CONFIG_DEBUG_UART_SKIP_INIT=y
 
 	CONFIG_LOG=y
 	CONFIG_HEXDUMP=y

-- 
2.51.0