[PATCH v4 3/3] doc: phytec: imx8m: Style and firmware update

[Yannic Moog]

Hi Jerome,

Am Mittwoch, dem 17.09.2025 um 17:12 +0200 schrieb Jerome Forissier:
> Hi Yannic,
> 
> On 9/9/25 16:05, Yannic Moog wrote:
> > Use single make command for compiling blobs and U-Boot.
> > Update the imx firmware version.
> > 
> > Signed-off-by: Yannic Moog <y.moog at phytec.de>
> > ---
> >  doc/board/phytec/imx8mm-phygate-tauri-l.rst | 27 ++++++++++++++---------
> >  doc/board/phytec/phycore-imx8mm.rst         | 28 +++++++++++++++---------
> >  doc/board/phytec/phycore-imx8mp.rst         | 34 +++++++++++++++++---------
> > ---
> >  3 files changed, 55 insertions(+), 34 deletions(-)
> > 
> > diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > index
> > 7efc9392361b4a867ce2bc18db11aacf31208800..4dd82cd9785fa585ed216664a25f593d4e
> > 723dbb 100644
> > --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst
> > @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
> >  
> >     $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
> >     $ cd trusted-firmware-a
> > -   $ export CROSS_COMPILE=aarch64-linux-gnu-
> > -   $ export IMX_BOOT_UART_BASE=0x30880000
> > -   $ make PLAT=imx8mm BL32_BASE=0xbe000000 SPD=opteed bl31
> > +   $ make -j $(nproc) \
> > +          CROSS_COMPILE=aarch64-linux-gnu- \
> > +          PLAT=imx8mm \
> > +          IMX_BOOT_UART_BASE=0x30880000 \
> > +          BL32_BASE=0xbe000000 \
> > +          SPD=opteed \
> > +          bl31
> >  
> >  Build the OP-TEE binary
> >  -----------------------
> > @@ -32,8 +36,9 @@ Build the OP-TEE binary
> >  
> >     $ git clone https://github.com/OP-TEE/optee_os.git
> >     $ cd optee_os
> > -   $ make CFG_TEE_BENCHMARK=n \
> > +   $ make -j $(nproc) \
> >            CROSS_COMPILE=aarch64-linux-gnu- \
> > +          CFG_TEE_BENCHMARK=n \
> 
> CFG_TEE_BENCHMARK=n is not needed anymore

Thanks, that is a rebasing mistake ...

Yannic

> 
> >            O=out/arm \
> >            PLATFORM=imx-mx8mm_phygate_tauri_l
> >  
> > @@ -42,9 +47,9 @@ Get the ddr firmware
> >  
> >  .. code-block:: bash
> >  
> > -   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.23.bin
> > -   $ chmod +x firmware-imx-8.23.bin
> > -   $ ./firmware-imx-8.23.bin
> > +   $ wget
> > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin
> > +   $ chmod +x firmware-imx-8.28-994fa14.bin
> > +   $ ./firmware-imx-8.28-994fa14.bin
> >  
> >  Build U-Boot for SD card
> >  ------------------------
> > @@ -56,15 +61,17 @@ Copy binaries
> >  
> >     $ cp <TF-A dir>/build/imx8mm/release/bl31.bin .
> >     $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin
> > -   $ cp firmware-imx-8.23/firmware/ddr/synopsys/lpddr4*.bin .
> > +   $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin .
> >  
> >  Build U-Boot
> >  ^^^^^^^^^^^^
> >  
> >  .. code-block:: bash
> >  
> > -   $ make imx8mm-phygate-tauri-l_defconfig
> > -   $ make flash.bin
> > +   $ make -j $(nproc)
> > +          CROSS_COMPILE=aarch64-linux-gnu- \
> > +          imx8mm-phygate-tauri-l_defconfig \
> > +          flash.bin
> >  
> >  Flash SD card
> >  ^^^^^^^^^^^^^
> > diff --git a/doc/board/phytec/phycore-imx8mm.rst b/doc/board/phytec/phycore-
> > imx8mm.rst
> > index
> > ba6299a968ae9980d583b87b46dcccba5aa4a186..d5edbc91474e95f677dd12e5fcc6c16092
> > dea1cd 100644
> > --- a/doc/board/phytec/phycore-imx8mm.rst
> > +++ b/doc/board/phytec/phycore-imx8mm.rst
> > @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary
> >  
> >     $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
> >     $ cd trusted-firmware-a
> > -   $ export CROSS_COMPILE=aarch64-linux-gnu-
> > -   $ export IMX_BOOT_UART_BASE=0x30880000
> > -   $ make PLAT=imx8mm BL32_BASE=0x7e000000 SPD=opteed bl31
> > +   $ make -j $(nproc) \
> > +          CROSS_COMPILE=aarch64-linux-gnu- \
> > +          PLAT=imx8mm \
> > +          IMX_BOOT_UART_BASE=0x30880000 \
> > +          BL32_BASE=0x7e000000 \
> > +          SPD=opteed \
> > +          bl31
> >  
> >  Build the OP-TEE binary
> >  -----------------------
> > @@ -32,8 +36,9 @@ Build the OP-TEE binary
> >  
> >     $ git clone https://github.com/OP-TEE/optee_os.git
> >     $ cd optee_os
> > -   $ make CFG_TEE_BENCHMARK=n \
> > +   $ make -j $(nproc) \
> >            CROSS_COMPILE=aarch64-linux-gnu- \
> > +          CFG_TEE_BENCHMARK=n \
> 
> Same
> 
> 


[...]