[PATCH] board: phytec: phycore-imx93: Set CONFIG_ETHPRIME to eth0

[Primoz Fiser]

Set ethprime to eth0 since FEC interface is considered the primary IF on
phyCORE-i.MX93 SoM based boards. This comes from the fact that the same
bootloader is reused for both carrier boards, that is phyBOARD-Segin and
phyBOARD-Nash which both use different Ethernet PHYs on the EQOS (eth1)
interface and thus eth1 cannot be used as a prime.

Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
---
 configs/imx93-phycore_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/imx93-phycore_defconfig b/configs/imx93-phycore_defconfig
index 0acdfd2bf53c..4c952e966d1a 100644
--- a/configs/imx93-phycore_defconfig
+++ b/configs/imx93-phycore_defconfig
@@ -89,7 +89,7 @@ CONFIG_ENV_REDUNDANT=y
 CONFIG_ENV_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_MMC_DEVICE_INDEX=1
 CONFIG_USE_ETHPRIME=y
-CONFIG_ETHPRIME="eth1"
+CONFIG_ETHPRIME="eth0"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
-- 
2.34.1