[PATCH] imx93_frdm: Add support for flashing board with UUU

[Mathieu Dubois-Briand]

Allow to flash a board using NXP UUU utility:
- Enable fastboot support on USB.
- Add fastboot partition aliases with names used by UUU. Also add extra
  environment variables used by UUU.
- Set 'dofastboot' environment variable based on boot device
  configuration, allowing to automatically enter fastboot when booting
  from USB.

Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand at bootlin.com>
---
 board/freescale/imx93_frdm/imx93_frdm.c   |  6 ++++++
 board/freescale/imx93_frdm/imx93_frdm.env |  8 ++++++++
 configs/imx93_frdm_defconfig              | 13 +++++++++++++
 3 files changed, 27 insertions(+)

diff --git a/board/freescale/imx93_frdm/imx93_frdm.c b/board/freescale/imx93_frdm/imx93_frdm.c
index c74fd85712f4..ab9ee040d8bf 100644
--- a/board/freescale/imx93_frdm/imx93_frdm.c
+++ b/board/freescale/imx93_frdm/imx93_frdm.c
@@ -10,6 +10,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch-imx9/imx93_pins.h>
 #include <asm/arch/clock.h>
+#include <asm/mach-imx/boot_mode.h>
 #include <dm/device.h>
 #include <dm/uclass.h>
 
@@ -55,5 +56,10 @@ int board_late_init(void)
 		env_set("board_rev", "iMX93");
 	}
 
+	if (get_boot_device() == USB_BOOT) {
+		printf("Detect USB boot. Will enter fastboot mode!\n");
+		env_set_ulong("dofastboot", 1);
+	}
+
 	return 0;
 }
diff --git a/board/freescale/imx93_frdm/imx93_frdm.env b/board/freescale/imx93_frdm/imx93_frdm.env
index 528a953c8df1..ea5000f1c685 100644
--- a/board/freescale/imx93_frdm/imx93_frdm.env
+++ b/board/freescale/imx93_frdm/imx93_frdm.env
@@ -19,8 +19,16 @@ kernel_addr_r=CONFIG_SYS_LOAD_ADDR
 loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
 loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
 boot_os=booti ${loadaddr} - ${fdt_addr_r}
+fastboot_partition_alias_all=0:0
+fastboot_partition_alias_bootloader=0.1
+emmc_dev=0
+sd_dev=0
+dofastboot=0
 
 bsp_bootcmd=
+	if test ${dofastboot} = 1; then
+		fastboot 0;
+	fi;
 	echo Running BSP bootcmd ...;
 	mmc dev ${mmcdev};
 	run mmcargs;
diff --git a/configs/imx93_frdm_defconfig b/configs/imx93_frdm_defconfig
index 4f837ca92828..3f96e1ddd4ff 100644
--- a/configs/imx93_frdm_defconfig
+++ b/configs/imx93_frdm_defconfig
@@ -30,6 +30,7 @@ CONFIG_EFI_VAR_BUF_SIZE=139264
 CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
 CONFIG_EFI_CAPSULE_ON_DISK=y
 CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_BOOTCOMMAND="bootflow scan -lb; run bsp_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx93-11x11-frdm.dtb"
 CONFIG_SYS_CBSIZE=2048
@@ -58,6 +59,7 @@ CONFIG_CMD_ERASEENV=y
 CONFIG_CMD_NVEDIT_EFI=y
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_BIND is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_FUSE=y
@@ -91,6 +93,11 @@ CONFIG_ADC_IMX93=y
 CONFIG_SPL_CLK_IMX93=y
 CONFIG_CLK_IMX93=y
 CONFIG_DFU_MMC=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82800000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_IMX_RGPIO2P=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
@@ -116,6 +123,12 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_CMD_POWEROFF=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
+CONFIG_CI_UDC=y
 CONFIG_ULP_WATCHDOG=y
 CONFIG_WDT=y
 CONFIG_SHA384=y

---
base-commit: 7a4f3c5652157cbb3d26a7728bfe537ea483efc9
change-id: 20250911-mathieu-frdm_imx93_fastboot-7ab00c562a4c

Best regards,
-- 
Mathieu Dubois-Briand <mathieu.dubois-briand at bootlin.com>