[RFC PATCH v2 0/5] Add initial support for AM62D2-EVM

Tom Rini trini at konsulko.com
Wed Sep 10 00:03:12 CEST 2025


On Tue, Sep 09, 2025 at 11:04:24AM +0530, Paresh Bhagat wrote:
> The AM62D2 SoC, part of the K3 architecture, is built for high-performance
> DSP tasks in automotive audio, pro audio, radar, sonar, and medical
> imaging. It features up to four Cortex-A53 cores (1.4GHz), two Cortex-R5F
> cores, and a C7x DSP with 2 TOPS MMA. Key interfaces include multi-channel
> McASP audio, TSN-capable Gigabit Ethernet, and a range of peripherals
> (UART, SPI, I2C, CAN, USB, eMMC/SD, OSPI, CSI). It supports LPDDR4/DDR4,
> secure boot with hardware security, and low-power modes with
> CAN/GPIO/UART wakeup.
[snip]
>  arch/arm/dts/Makefile                        |    2 +
>  arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi | 2802 ++++++++++++++++++
>  arch/arm/dts/k3-am62d-evm-binman.dtsi        |  262 ++
>  arch/arm/dts/k3-am62d2-evm-u-boot.dtsi       |   14 +
>  arch/arm/dts/k3-am62d2-r5-evm.dts            |   82 +
>  arch/arm/mach-k3/am62ax/Kconfig              |   25 +
>  board/ti/am62dx/Kconfig                      |   26 +
>  board/ti/am62dx/MAINTAINERS                  |    8 +
>  board/ti/am62dx/Makefile                     |    7 +
>  board/ti/am62dx/am62dx.env                   |   21 +
>  board/ti/am62dx/board-cfg.yaml               |   36 +
>  board/ti/am62dx/evm.c                        |   37 +
>  board/ti/am62dx/pm-cfg.yaml                  |   12 +
>  board/ti/am62dx/rm-cfg.yaml                  | 1047 +++++++
>  board/ti/am62dx/sec-cfg.yaml                 |  379 +++
>  board/ti/am62dx/tifs-rm-cfg.yaml             |  903 ++++++
>  configs/am62dx_evm_a53_defconfig             |   22 +
>  configs/am62dx_evm_r5_defconfig              |   20 +
>  18 files changed, 5705 insertions(+)
>  create mode 100644 arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi
>  create mode 100644 arch/arm/dts/k3-am62d-evm-binman.dtsi
>  create mode 100644 arch/arm/dts/k3-am62d2-evm-u-boot.dtsi
>  create mode 100644 arch/arm/dts/k3-am62d2-r5-evm.dts
>  create mode 100644 board/ti/am62dx/Kconfig
>  create mode 100644 board/ti/am62dx/MAINTAINERS
>  create mode 100644 board/ti/am62dx/Makefile
>  create mode 100644 board/ti/am62dx/am62dx.env
>  create mode 100644 board/ti/am62dx/board-cfg.yaml
>  create mode 100644 board/ti/am62dx/evm.c
>  create mode 100644 board/ti/am62dx/pm-cfg.yaml
>  create mode 100644 board/ti/am62dx/rm-cfg.yaml
>  create mode 100644 board/ti/am62dx/sec-cfg.yaml
>  create mode 100644 board/ti/am62dx/tifs-rm-cfg.yaml
>  create mode 100644 configs/am62dx_evm_a53_defconfig
>  create mode 100644 configs/am62dx_evm_r5_defconfig

This isn't architecture and board, it's just a board, it should be a
single patch. In that some of these yaml files are big, it would be good
to figure out as a generic problem how to reduce that if possible (I
don't know if it is).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250909/f82da21c/attachment.sig>


More information about the U-Boot mailing list