[PATCH] configs: j7200_evm_a72_defconfig: Enable DP83867 Ethernet PHY

Siddharth Vadapalli s-vadapalli at ti.com
Tue Sep 9 06:48:15 CEST 2025


The MCU Ethernet Interface on J7200-EVM uses the DP83867 Ethernet PHY as
described in the section '4.9 MCU Ethernet Interface' of the J7200-EVM
User-Guide [0]. Since the config corresponding to the DP83867 PHY has not
been enabled, the Generic PHY driver is used. As a result, the RGMII delays
do not take effect leading to packet losses.

Fix this by enabling the config for the DP83867 Ethernet PHY.

[0]: https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf
Fixes: f8c1e893c82f ("configs: j7200_evm_a72: Add Initial support")
Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---

Hello,

This patch is based on commit
7a4f3c56521 Prepare v2025.10-rc4
of Mainline U-Boot.

Logs without patch applied:
https://gist.github.com/Siddharth-Vadapalli-at-TI/e016dc8a1bc6a3bad0af395e0c5910a8
Logs with patch applied:
https://gist.github.com/Siddharth-Vadapalli-at-TI/92c841b195f24f01c3542654a6e144c8

Regards,
Siddharth.

 configs/j7200_evm_a72_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index 36274804881..69b77ad5285 100644
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -144,6 +144,7 @@ CONFIG_SPI_FLASH_MTD=y
 CONFIG_MULTIPLEXER=y
 CONFIG_SPL_MUX_MMIO=y
 CONFIG_MUX_MMIO=y
+CONFIG_PHY_TI_DP83867=y
 CONFIG_PHY_TI_DP83869=y
 CONFIG_PHY_FIXED=y
 CONFIG_TI_AM65_CPSW_NUSS=y
-- 
2.43.0



More information about the U-Boot mailing list