[U-Boot] [PATCH] Add initial support for mx6slevk board

[Fabio Estevam]

On Mon, Apr 1, 2013 at 2:26 PM, Vikram Narayanan <vikram186 at gmail.com> wrote:

> Is the above same for all the variants of i.Mx?
> Can we put this into a common header file?

Ok, I can try to put this into a common location.

>> +#define IOMUX_CONFIG_SION 0x10
>> +#define NO_MUX_I                0
>> +#define NO_PAD_I                0
>> +enum {
>> +       MX6_PAD_AUD_MCLK__AUDMUX_AUDIO_CLK_OUT                  =
>> IOMUX_PAD(0x02A4, 0x004C, 0, 0x0000, 0, 0),
>> +       MX6_PAD_AUD_MCLK__PWM4_PWMO                             =
>> IOMUX_PAD(0x02A4, 0x004C, 1, 0x0000, 0, 0),
>> +       MX6_PAD_AUD_MCLK__ECSPI3_RDY                            =
>> IOMUX_PAD(0x02A4, 0x004C, 2, 0x06B4, 0, 0),
>> +       MX6_PAD_AUD_MCLK__FEC_MDC                               =
>> IOMUX_PAD(0x02A4, 0x004C, 3, 0x0000, 0, 0),
>
>
> Is the mx6slevk using all the pins defined here?

No, I put all pins for completion.

> If not please take off the unused IOMUX pins so that we don't add dead code.

I thought it was common practice to provide the complete IOMUX pin file.

Stefano, please advise.

Regards,

Fabio Estevam