April 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Apr 1 00:38:07 CEST 2013
Ending: Tue Apr 30 23:15:33 CEST 2013
Messages: 2597

• [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage   Vadim Bendebury (вб)
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• [U-Boot] Sections of RAM used by u boot   Scott A
• [U-Boot] Handling images(.jpg, .bmp etc) in u-boot   Bhargav AK
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Albert ARIBAUD
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Albert ARIBAUD
• [U-Boot] Warning messages in latest u-boot-samsung   Albert ARIBAUD
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Albert ARIBAUD
• [U-Boot] Warning messages in latest u-boot-samsung   Albert ARIBAUD
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Albert ARIBAUD
• [U-Boot] OMAP (4) boot_params   Albert ARIBAUD
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Albert ARIBAUD
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Albert ARIBAUD
• [U-Boot] u-boot boot process is broken, how do i recover?   Albert ARIBAUD
• [U-Boot] [PATCH v10 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Albert ARIBAUD
• [U-Boot] u-boot boot process is broken, how do i recover?   Albert ARIBAUD
• [U-Boot] OMAP (4) boot_params   Albert ARIBAUD
• [U-Boot] OMAP (4) boot_params   Albert ARIBAUD
• [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi   Albert ARIBAUD
• [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi   Albert ARIBAUD
• [U-Boot] [PATCH V2] ARM: bcm2835: fix get_timer() to return ms   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.04-rc2 released   Albert ARIBAUD
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Albert ARIBAUD
• [U-Boot] u-boot boot process is broken, how do i recover?   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.04-rc2 released   Albert ARIBAUD
• [U-Boot] [PATCH 1/5] ARM: vexpress: move files in preparation for adding a new platform   Albert ARIBAUD
• [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config   Albert ARIBAUD
• [U-Boot] u-boot boot process is broken, how do i recover?   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH v2] BUGFIX: arm: data abort in get_bad_stack_swi   Albert ARIBAUD
• [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command   Albert ARIBAUD
• [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.04-rc2 released   Albert ARIBAUD
• [U-Boot] Require guidance   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PULL] please pull u-boot-atmel/master   Albert ARIBAUD
• [U-Boot] u-boot boot process is broken, how do i recover?   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] da850evm, da840_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/4] da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/8] ARM: Add Seagate GoFlexHome support   Albert ARIBAUD
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Albert ARIBAUD
• [U-Boot] [PATCH] mx31pdk: Remove watchdog support   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Albert ARIBAUD
• [U-Boot] [ARM] rolling u-boot-arm back then forward   Albert ARIBAUD
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Albert ARIBAUD
• [U-Boot] [ARM] rolling u-boot-arm back then forward - done   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/1] ARM: Add support for Seagate GoFlexHome   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master - UPDATED   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.04-rc2 released   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH V2] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Albert ARIBAUD
• [U-Boot] [PATCH v12 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.04-rc2 released   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.04-rc2 released   Albert ARIBAUD
• [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches... -- FIXED   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v3 2/4] da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v3 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/4] cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT   Albert ARIBAUD
• [U-Boot] [PATCH v4 3/4] da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT   Albert ARIBAUD
• [U-Boot] [PATCH v4 4/4] smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Albert ARIBAUD
• [U-Boot] [PATCH V2] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PATCH] integrator: enable device tree   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH v3] BUGFIX: arm: data abort in get_bad_stack_swi   Albert ARIBAUD
• [U-Boot] [PATCH V2] ARM: Fix __bss_start and __bss_end in linker scripts   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Albert ARIBAUD
• [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README   Albert ARIBAUD
• [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README   Albert ARIBAUD
• [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux   Albert ARIBAUD
• [U-Boot] [PATCH] ARMv7: start.S: stay in HYP mode if u-boot is entered in it   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [STATUS] v2013.04-rc3 released   Albert ARIBAUD
• [U-Boot] uboot_porting_guide   Albert ARIBAUD
• [U-Boot] [PATCH] make hang() a weak function   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Albert ARIBAUD
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Albert ARIBAUD
• [U-Boot] PCIe card doesn't work   Albert ARIBAUD
• [U-Boot] USB Device Identification -- non-removable USB NAND flash   Albert ARIBAUD
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Albert ARIBAUD
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Albert ARIBAUD
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Albert ARIBAUD
• [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores   Albert ARIBAUD
• [U-Boot] [PATCH v3 5/5] lib: consolidate hang()   Albert ARIBAUD
• [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo   Pierre AUBERT
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Pierre AUBERT
• [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo   Pierre AUBERT
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Pierre AUBERT
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Pierre AUBERT
• [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support   Sinan Akman
• [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command   Adnan Ali
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Adnan Ali
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Adnan Ali
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Adnan Ali
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Adnan Ali
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Adnan Ali
• [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command   Adnan Ali
• [U-Boot] [PATCH V8 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and   Amar
• [U-Boot] [PATCH V8 1/9] FDT: Add compatible string for DWMMC   Amar
• [U-Boot] [PATCH V8 2/9] EXYNOS5: FDT: Add DWMMC device node data   Amar
• [U-Boot] [PATCH V8 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues   Amar
• [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Amar
• [U-Boot] [PATCH V8 5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.   Amar
• [U-Boot] [PATCH V8 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT   Amar
• [U-Boot] [PATCH V8 7/9] MMC: APIs to support resize of EMMC boot partition   Amar
• [U-Boot] [PATCH V8 8/9] SMDK5250: Enable EMMC booting   Amar
• [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition   Amar
• [U-Boot] [PATCH V1 0/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C   Amar
• [U-Boot] [PATCH V1 1/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C   Amar
• [U-Boot] [PATCH v2 1/7] patman: Fix up checkpatch parsing to deal with 'CHECK' lines   Doug Anderson
• [U-Boot] [PATCH v2 2/7] patman: Don't allow spaces in tags   Doug Anderson
• [U-Boot] [PATCH v2 4/7] patman: Provide option to ignore bad aliases   Doug Anderson
• [U-Boot] [PATCH v2 6/7] patman: Add Series-process-log tag to sort/uniq change logs   Doug Anderson
• [U-Boot] [PATCH] patman: Ignore all Gerrit Commit-* tags   Doug Anderson
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Doug Anderson
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Doug Anderson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Fleming Andy-AFLEMING
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Fleming Andy-AFLEMING
• [U-Boot] [PATCH v3 0/3] Add TI816X EVM support   TENART Antoine
• [U-Boot] [PATCH v3 1/3] Prepare for TI816X : reuse existing code from TI814X   TENART Antoine
• [U-Boot] [PATCH v3 2/3] Add TI816X support   TENART Antoine
• [U-Boot] [PATCH v3 3/3] Add TI816X evm board support   TENART Antoine
• [U-Boot] [PATCH v3 3/3] Add TI816X evm board support   TENART Antoine
• [U-Boot] [PATCH v3 2/3] Add TI816X support   TENART Antoine
• [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo   Pierre Aubert
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Pierre Aubert
• [U-Boot] [PATCH v2 1/2] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo   Pierre Aubert
• [U-Boot] [PATCH v2 2/2] imx: Add support for the SabreSD shipped with i.MX6DL   Pierre Aubert
• [U-Boot] [PATCH v5 3/3] mx6qsabre{sd, auto}: Add boot mode select   Stefano Babic
• [U-Boot] [PATCH v5 1/3] mx6qsabresd: Document the mapping of USDHC[2-4]   Stefano Babic
• [U-Boot] [PATCH v5 2/3] mx6qsabresd: Fix card detection for invalid card id case   Stefano Babic
• [U-Boot] [PATCH] mx28evk: Introduce a new target for saving env vars to NAND   Stefano Babic
• [U-Boot] [PATCH] mx6qsabrelite: README: No need to pass 'u-boot.imx'   Stefano Babic
• [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board   Stefano Babic
• [U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling   Stefano Babic
• [U-Boot] [PATCH] mx25pdk: Enable imxdi RTC   Stefano Babic
• [U-Boot] [PATCH] mx23_olinuxino: Change definitions to use spaces instead of tabs   Stefano Babic
• [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Stefano Babic
• [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board   Stefano Babic
• [U-Boot] [PATCH v2] mx6: Fix get_board_rev() for the mx6 solo case   Stefano Babic
• [U-Boot] [PATCH 1/3] wandboard: Remove duplicate 'mmc dev'   Stefano Babic
• [U-Boot] [PATCH 2/3] mx6qsabrelite: Remove duplicate 'mmc dev'   Stefano Babic
• [U-Boot] [PATCH 3/3] wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM   Stefano Babic
• [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board   Stefano Babic
• [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Stefano Babic
• [U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Stefano Babic
• [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Stefano Babic
• [U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [STATUS] v2013.04-rc2 released   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Stefano Babic
• [U-Boot] zmodem ?   Stefano Babic
• [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels   Stefano Babic
• [U-Boot] [PATCH] mx31pdk: Remove watchdog support   Stefano Babic
• [U-Boot] [PATCH v2] mx35 iomux: correct offsets of IOMUX registers   Stefano Babic
• [U-Boot] [PATCH] mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments   Stefano Babic
• [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels   Stefano Babic
• [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support   Stefano Babic
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   Stefano Babic
• [U-Boot] [PATCH 3/5] vybrid: add uart driver support   Stefano Babic
• [U-Boot] [PATCH 4/5] vybrid: add eSDHC driver support   Stefano Babic
• [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support   Stefano Babic
• [U-Boot] [PATCH] arm: imx: Change iomux functions to void type   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v3] imx: Add titanium board support (i.MX6 based)   Stefano Babic
• [U-Boot] [PATCH v2] mx35 iomux: correct offsets of IOMUX registers   Stefano Babic
• [U-Boot] [PATCH] mx28evk: add trimffs to nand command   Stefano Babic
• [U-Boot] [PATCH] arm: imx: Change iomux functions to void type   Stefano Babic
• [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230   Stefano Babic
• [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230   Stefano Babic
• [U-Boot] [PATCH v4] imx: Add titanium board support (i.MX6 based)   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Stefano Babic
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Stefano Babic
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Stefano Babic
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Stefano Babic
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefano Babic
• [U-Boot] [PATCH] arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h   Stefano Babic
• [U-Boot] [PATCH] mx35 iomux: correct input select register index   Stefano Babic
• [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register   Stefano Babic
• [U-Boot] [PATCH] nitrogen6x: Setup CCM_CCOSR register   Stefano Babic
• [U-Boot] [PATCH v3 1/7] mx6qsabre{sd, auto}: Add update_sd_firmware support   Stefano Babic
• [U-Boot] [PATCH v3 2/7] mx6qsabresd: Return status when initializing MMC   Stefano Babic
• [U-Boot] [PATCH v3 3/7] wandboard: Use env storage info for mmcdev/mmcpart   Stefano Babic
• [U-Boot] [PATCH v3 4/7] wandboard: Add update_sd_firmware support   Stefano Babic
• [U-Boot] [PATCH v3 5/7] wandboard: Add card detection for SOM MicroSD card   Stefano Babic
• [U-Boot] [PATCH v3 6/7] wandboard: Add support for Carrier Board MicroSD card   Stefano Babic
• [U-Boot] [PATCH v3 7/7] wandboard: Add boot selection support   Stefano Babic
• [U-Boot] [PATCH v5 1/2] mx51evk: Update environment in order to allow booting a dt kernel   Stefano Babic
• [U-Boot] [PATCH v5 2/2] mx51evk: Do not force the rootfs type   Stefano Babic
• [U-Boot] [PATCH 1/3] mx5: Define a common get_board_rev()   Stefano Babic
• [U-Boot] [PATCH 2/3] mx5: Select CONFIG_REVISION_TAG   Stefano Babic
• [U-Boot] [PATCH 3/3] mx53ard: Move register masks into imx-regs.h   Stefano Babic
• [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file   Stefano Babic
• [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file   Stefano Babic
• [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset   Stefano Babic
• [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset   Stefano Babic
• [U-Boot] [PATCH 2/2] mx53ard: Rework default environment to support FDT, MMC and netboot   Stefano Babic
• [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions   Stefano Babic
• [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions   Stefano Babic
• [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage   Stefano Babic
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Stefano Babic
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Stefano Babic
• [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions   Stefano Babic
• [U-Boot] [PATCH v4 02/10] imx: Add useful fuse definitions   Stefano Babic
• [U-Boot] [PATCH v4 03/10] Add fuse API and commands   Stefano Babic
• [U-Boot] [PATCH v4 10/10] imx: Document fuse assignments for MAC addresses   Stefano Babic
• [U-Boot] [PATCH v4 04/10] Add fsl_iim driver   Stefano Babic
• [U-Boot] [PATCH v4 05/10] mpc: iim: Switch to common fsl_iim   Stefano Babic
• [U-Boot] [PATCH v4 06/10] mx51evk: Enable support for iim   Stefano Babic
• [U-Boot] [PATCH v4 07/10] Add mxc_ocotp driver   Stefano Babic
• [U-Boot] [PATCH v4 08/10] mx6qsabrelite: Enable support for ocotp   Stefano Babic
• [U-Boot] [PATCH v4 09/10] nitrogen6x: Enable support for ocotp   Stefano Babic
• [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage   Stefano Babic
• [U-Boot] [PATCH 1/4] imx: iomux-v3: Fix common pad control definitions   Stefano Babic
• [U-Boot] [PATCH 2/4] imx: iomux-v3: cosmetic: Reorganize definitions   Stefano Babic
• [U-Boot] [PATCH 3/4] imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro   Stefano Babic
• [U-Boot] [PATCH 4/4] imx: iomux-v3: Include PKE and PUE to pad control pull definitions   Stefano Babic
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   Stefano Babic
• [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3   Stefano Babic
• [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot   Jerry Van Baren
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Tushar Behera
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Dirk Behme
• [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board   Dirk Behme
• [U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling   Dirk Behme
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Dirk Behme
• [U-Boot] [PATCH] spi: mxc_spi: Set master mode for all channels   Dirk Behme
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Dirk Behme
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Dirk Behme
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Dirk Behme
• [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels   Dirk Behme
• [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop   Dirk Behme
• [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq   Vadim Bendebury
• [U-Boot] [PATCH] Do not call board_early_init_f() twice   Vadim Bendebury
• [U-Boot] [PATCH] i2c: add NACK logic in write   Vadim Bendebury
• [U-Boot] AM3517_EVM, MLO not booting   Andreas Bießmann
• [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3   Andreas Bießmann
• [U-Boot] [PATCH 1/1 v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken   Andreas Bießmann
• [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support   Andreas Bießmann
• [U-Boot] [PATCH v2 2/6] asm/omap_gpmc.h: consolidate common defines   Andreas Bießmann
• [U-Boot] [PATCH v2 3/6] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel   Andreas Bießmann
• [U-Boot] [PATCH v2 4/6] omap_gpmc: change nandecc command   Andreas Bießmann
• [U-Boot] [PATCH v2 5/6] omap_gpmc: add support for hw assisted BCH8   Andreas Bießmann
• [U-Boot] [PATCH v2 6/6] tricorder: enable hw assisted BCH8 in SPL and u-boot   Andreas Bießmann
• [U-Boot] [PATCH] Makefile: fix clobber target   Andreas Bießmann
• [U-Boot] [PATCH v3 4/6] omap_gpmc: change nandecc command   Andreas Bießmann
• [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8   Andreas Bießmann
• [U-Boot] [STATUS] v2013.04-rc2 released   Andreas Bießmann
• [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8   Andreas Bießmann
• [U-Boot] [PATCH v4 4/6] omap_gpmc: change nandecc command   Andreas Bießmann
• [U-Boot] [PATCH v4 4/6] omap_gpmc: change nandecc command   Andreas Bießmann
• [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8   Andreas Bießmann
• [U-Boot] [PATCH v4 5/6] omap_gpmc: add support for hw assisted BCH8   Andreas Bießmann
• [U-Boot] [PATCH] logo: update to the new logo for ATMEL   Andreas Bießmann
• [U-Boot] [PULL] please pull u-boot-atmel/master   Andreas Bießmann
• [U-Boot] [PATCH] patman: fix gitutil for decorations   Andreas Bießmann
• [U-Boot] [PATCH v2] patman: fix gitutil for decorations   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH] make hang() a weak function   Andreas Bießmann
• [U-Boot] [PATCH v2 0/5] consolidate hang()   Andreas Bießmann
• [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c   Andreas Bießmann
• [U-Boot] [PATCH v2 2/5] nios2: fix style in board.c.   Andreas Bießmann
• [U-Boot] [PATCH v2 3/5] mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORT   Andreas Bießmann
• [U-Boot] [PATCH v2 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT   Andreas Bießmann
• [U-Boot] [PATCH v2 5/5] lib: consolidate hang()   Andreas Bießmann
• [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c   Andreas Bießmann
• [U-Boot] phy ic isn't reset   Andreas Bießmann
• [U-Boot] [PATCH v3 0/5] consolidate hang()   Andreas Bießmann
• [U-Boot] [PATCH v3 1/5] microblaze: fix style in board.c   Andreas Bießmann
• [U-Boot] [PATCH v3 2/5] nios2: fix style in board.c.   Andreas Bießmann
• [U-Boot] [PATCH v3 3/5] mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORT   Andreas Bießmann
• [U-Boot] [PATCH v3 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT   Andreas Bießmann
• [U-Boot] [PATCH v3 5/5] lib: consolidate hang()   Andreas Bießmann
• [U-Boot] [PATCH v3 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT   Andreas Bießmann
• [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature   Rajeshwari Birje
• [U-Boot] [PATCH 3/4] power: Explicitly select pmic device's bus   Rajeshwari Birje
• [U-Boot] [PATCH 1/4 V3] EXYNOS5: FDT: Add compatible strings for Serial   Rajeshwari Birje
• [U-Boot] Warning messages in latest u-boot-samsung   Rajeshwari Birje
• [U-Boot] Warning messages in latest u-boot-samsung   Rajeshwari Birje
• [U-Boot] Warning messages in latest u-boot-samsung   Rajeshwari Birje
• [U-Boot] [PATCH 2/6 V4] Sound: MAX98095: Add the driver for codec   Rajeshwari Birje
• [U-Boot] [PATCH v2 1/9] pmic:max77686: add function to set voltage and mode   Rajeshwari Birje
• [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature   Rajeshwari Birje
• [U-Boot] [STATUS] v2013.04-rc2 released   Holger Brunck
• [U-Boot] USB Device Identification -- non-removable USB NAND flash   Curt Brune
• [U-Boot] [PATCH] mx28evk: add NAND commands   Eric Bénard
• [U-Boot] [PATCH] mx28evk: add NAND commands   Eric Bénard
• [U-Boot] [PATCH] mx28evk: add NAND commands   Eric Bénard
• [U-Boot] [PATCH] mx28evk: add trimffs to nand command   Eric Bénard
• [U-Boot] [PATCH] mx28evk: add trimffs to nand command   Eric Bénard
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Eric Bénard
• [U-Boot] [PATCH 1/2] da850: provide davinci_enable_uart0   Eric Bénard
• [U-Boot] [PATCH 2/2] davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK   Eric Bénard
• [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board   Eric Bénard
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Eric Bénard
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Eric Bénard
• [U-Boot] [PATCH 1/1 v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken   Javier Martinez Canillas
• [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Javier Martinez Canillas
• [U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Javier Martinez Canillas
• [U-Boot] Require guidance   Javier Martinez Canillas
• [U-Boot] Banner -> git co target?   Michael Cashwell
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Michael Cashwell
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Michael Cashwell
• [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Michael Cashwell
• [U-Boot] OMAP (4) boot_params   Michael Cashwell
• [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Michael Cashwell
• [U-Boot] OMAP (4) boot_params   Michael Cashwell
• [U-Boot] OMAP (4) boot_params   Michael Cashwell
• [U-Boot] OMAP (4) boot_params   Michael Cashwell
• [U-Boot] OMAP (4) boot_params   Michael Cashwell
• [U-Boot] "No status update" errors in OMAP mmc_send_cmd()   Michael Cashwell
• [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Michael Cashwell
• [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function   Michael Cashwell
• [U-Boot] Power Savings on ARM/OMAP4   Michael Cashwell
• [U-Boot] SDRAM init on OMAP4   Michael Cashwell
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Ch
• [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code   Naveen Krishna Ch
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Ch
• [U-Boot] Transplant u-boot to Atheros AR9344   Rynn Chan
• [U-Boot] AM3517_EVM, MLO not booting   James Chandler
• [U-Boot] AM3517_EVM, MLO not booting   James Chandler
• [U-Boot] AM3517_EVM, MLO not booting   James Chandler
• [U-Boot] [RFC] command/cache: Add flush_cache command   Jim Chargin
• [U-Boot] [PATCH 3/6] i2c: fsl_i2c:i2c_read(): dont try to write address w/ alen=0   Jim Chargin
• [U-Boot] [PATCH v4 4/7] i2c: fsl_i2c:i2c_read(): dont try to write address w/ alen=0   Jim Chargin
• [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code   Naveen Krishna Chatradhi
• [U-Boot] [PATCH 2/2] power: exynos-tmu: use the mux_addr bit fields in tmu_control register   Naveen Krishna Chatradhi
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Chatradhi
• [U-Boot] [PATCH] fdtdec: Add compatible string for High speed i2c   Naveen Krishna Chatradhi
• [U-Boot] [PATCH] Fix usb buffer size for large descriptor of devices   Nicolas Chauvet
• [U-Boot] Regression from v2013.04-rc3 with sdcard detection   Nicolas Chauvet
• [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Che-liang Chiou
• [U-Boot] [PATCH v2 8/9] samsung: trats2: add support for new board Trats2   Jaehoon Chung
• [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition   Jaehoon Chung
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Jaehoon Chung
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Jaehoon Chung
• [U-Boot] [PATCH V8 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues   Jaehoon Chung
• [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Jaehoon Chung
• [U-Boot] [PATCH V8 5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.   Jaehoon Chung
• [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Jaehoon Chung
• [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Jaehoon Chung
• [U-Boot] Setting uboot env vars from OS   Jason Cipriani
• [U-Boot] Setting uboot env vars from OS   Jason Cipriani
• [U-Boot] [PATCH] env: don't add an empty key to the env hashtable   Lucian Cojocar
• [U-Boot] [PATCH] env: don't add an empty key to the env hashtable   Lucian Cojocar
• [U-Boot] [PATCH v2] env: throw an error when an empty key is used   Lucian Cojocar
• [U-Boot] fatwrite problem   Ruud Commandeur
• [U-Boot] fatwrite problem   Ruud Commandeur
• [U-Boot] fatwrite problem   Ruud Commandeur
• [U-Boot] fatwrite problem   Ruud Commandeur
• [U-Boot] offer: program to deal with kirkwood "boot from UART"   Jason Cooper
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Rommel Custodio
• [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support   Christoffer Dall
• [U-Boot] [RFC PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Christoffer Dall
• [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch   Christoffer Dall
• [U-Boot] OMAP (4) boot_params   Wolfgang Denk
• [U-Boot] [PATCH] flash: Add optional verify-after-write feature   Wolfgang Denk
• [U-Boot] Query   Wolfgang Denk
• [U-Boot] [PATCH v2 9/9] Add a maintainer entry for the Trats2 board.   Wolfgang Denk
• [U-Boot] [STATUS] v2013.04-rc2 released   Wolfgang Denk
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   Wolfgang Denk
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   Wolfgang Denk
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   Wolfgang Denk
• [U-Boot] env: fix potential stack overflow in environment functions   Wolfgang Denk
• [U-Boot] env: fix potential stack overflow in environment functions   Wolfgang Denk
• [U-Boot] env: fix potential stack overflow in environment functions   Wolfgang Denk
• [U-Boot] env: fix potential stack overflow in environment functions   Wolfgang Denk
• [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition   Wolfgang Denk
• [U-Boot] env: fix potential stack overflow in environment functions   Wolfgang Denk
• [U-Boot] env: fix potential stack overflow in environment functions   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/mpc85xx: Clear L1 D-cache lock   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Wolfgang Denk
• [U-Boot] env: fix potential stack overflow in environment functions   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [PATCH] VGA text console support   Wolfgang Denk
• [U-Boot] [PATCH] VGA text console support   Wolfgang Denk
• [U-Boot] problem building uboot   Wolfgang Denk
• [U-Boot] Question about Automatic Updates   Wolfgang Denk
• [U-Boot] [PATCH 0/8] ARM: Add Seagate GoFlexHome support   Wolfgang Denk
• [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel   Wolfgang Denk
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Wolfgang Denk
• [U-Boot] Question about Automatic Updates   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] DWMMC / DWMCI question   Wolfgang Denk
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Wolfgang Denk
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Wolfgang Denk
• [U-Boot] [PATCH v2 0/8] ARM: Add Seagate GoFlexHome support   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Wolfgang Denk
• [U-Boot] [PATCH v3 1/1] ARM: Add support for Seagate GoFlexHome   Wolfgang Denk
• [U-Boot] [v3] command/cache: Add flush command   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash/master   Wolfgang Denk
• [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel   Wolfgang Denk
• [U-Boot] [PATCH] Provide more useful debugging when an initcall fails   Wolfgang Denk
• [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK   Wolfgang Denk
• [U-Boot] uboot newbie question on booting ep405 board   Wolfgang Denk
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Wolfgang Denk
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Wolfgang Denk
• [U-Boot] [PATCH] make hang() a weak function   Wolfgang Denk
• [U-Boot] [PATCH] make hang() a weak function   Wolfgang Denk
• [U-Boot] [PATCH] make hang() a weak function   Wolfgang Denk
• [U-Boot] [PATCH] make hang() a weak function   Wolfgang Denk
• [U-Boot] [PATCH] make hang() a weak function   Wolfgang Denk
• [U-Boot] Bug in fdt_fixup_fman_firmware   Wolfgang Denk
• [U-Boot] [PATCH] make hang() a weak function   Wolfgang Denk
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Wolfgang Denk
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Wolfgang Denk
• [U-Boot] [PATCH 4 (resend)] imx: Add titanium board support (i.MX6 based)   Wolfgang Denk
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Wolfgang Denk
• [U-Boot] [PATCH v2 00/12] arm: add Faraday A36x SoC platform support   Wolfgang Denk
• [U-Boot] [PATCH v2 03/12] net: add Faraday FTMAC110 10/100Mbps ethernet support   Wolfgang Denk
• [U-Boot] [PATCH v2 04/12] i2c: add Faraday FTI2C010 I2C controller support   Wolfgang Denk
• [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support   Wolfgang Denk
• [U-Boot] [PATCH v2 06/12] mmc: add an alternative driver to Faraday FTSDC010   Wolfgang Denk
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Wolfgang Denk
• [U-Boot] [PATCH v2 08/12] mtd: spi: add FTSPI020 SPI Flash controller support   Wolfgang Denk
• [U-Boot] [PATCH v2 09/12] usb: ehci: add Faraday USB 2.0 EHCI support   Wolfgang Denk
• [U-Boot] [PATCH v2 10/12] usb: gadget: add Faraday FOTG210 USB gadget support   Wolfgang Denk
• [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores   Wolfgang Denk
• [U-Boot] [PATCH v2 12/12] arm: add Faraday A36x SoC platform support   Wolfgang Denk
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Wolfgang Denk
• [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo   Wolfgang Denk
• [U-Boot] How do I use AM335x eth1 rather than eth0 ?   Wolfgang Denk
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Wolfgang Denk
• [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo   Wolfgang Denk
• [U-Boot] [PATCH v2 0/5] consolidate hang()   Wolfgang Denk
• [U-Boot] [PATCH] mx51evk: Update environmet in order to allow booting a dt kernel   Wolfgang Denk
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Wolfgang Denk
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Wolfgang Denk
• [U-Boot] [STATUS] v2013.04 released   Wolfgang Denk
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Wolfgang Denk
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Wolfgang Denk
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Wolfgang Denk
• [U-Boot] burst transaction test   Wolfgang Denk
• [U-Boot] Add filesystem support   Wolfgang Denk
• [U-Boot] [RFC] Remove ^L string   Wolfgang Denk
• [U-Boot] [RFC] Remove ^L string   Wolfgang Denk
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Wolfgang Denk
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Wolfgang Denk
• [U-Boot] ECCN code for uboot   Wolfgang Denk
• [U-Boot] Add filesystem support   Wolfgang Denk
• [U-Boot] ECCN code for uboot   Wolfgang Denk
• [U-Boot] MIPI-CSI Support question   Wolfgang Denk
• [U-Boot] P2020RDB: Error while using P2020RDB_SDCARD   Wolfgang Denk
• [U-Boot] Questions about U-boot of customized MPC8315E board   Wolfgang Denk
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Wolfgang Denk
• [U-Boot] MIPI-CSI Support question   Wolfgang Denk
• [U-Boot] Questions about U-boot of customized MPC8315E board   Wolfgang Denk
• [U-Boot] [PATCH v3 6/7] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM   Wolfgang Denk
• [U-Boot] [PATCH] cmd_boot: cleanup for 'go' command   Wolfgang Denk
• [U-Boot] [PATCH v4 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM   Wolfgang Denk
• [U-Boot] Sections of RAM used by u boot   Wolfgang Denk
• [U-Boot] [PATCH] env: don't add an empty key to the env hashtable   Wolfgang Denk
• [U-Boot] [PATCH] env: don't add an empty key to the env hashtable   Wolfgang Denk
• [U-Boot] what is sandbox?   Wolfgang Denk
• [U-Boot] what is sandbox?   Wolfgang Denk
• [U-Boot] [RFC] Bootcount improvements   Alexandre Dilly
• [U-Boot] [PATCH 0/8] palm treo 680 smartphone board support   Mike Dunn
• [U-Boot] [PATCH 1/8] pxa_lcd: add the ACX544AKN lcd device   Mike Dunn
• [U-Boot] [PATCH 2/8] pxa_lcd: make lcd_enable() a weak pointer   Mike Dunn
• [U-Boot] [PATCH 3/8] pxa_lcd: allow L_BIAS line to be unused   Mike Dunn
• [U-Boot] [PATCH 4/8] pxa27x_udc: remove call to unimplemented set_GPIO_mode()   Mike Dunn
• [U-Boot] [PATCH 5/8] arm: bootm: call udc_disable() before booting linux   Mike Dunn
• [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel   Mike Dunn
• [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash   Mike Dunn
• [U-Boot] [PATCH 8/8] board support for palm treo 680   Mike Dunn
• [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel   Mike Dunn
• [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash   Mike Dunn
• [U-Boot] [PATCH 2/8] pxa_lcd: make lcd_enable() a weak pointer   Mike Dunn
• [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash   Mike Dunn
• [U-Boot] [PATCH 3/8] pxa_lcd: allow L_BIAS line to be unused   Mike Dunn
• [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support   Mike Dunn
• [U-Boot] [PATCH v2 1/7] pxa_lcd: add the ACX544AKN lcd device   Mike Dunn
• [U-Boot] [PATCH v2 2/7] pxa_lcd: make lcd_enable() a weak pointer   Mike Dunn
• [U-Boot] [PATCH v2 3/7] pxa27x_udc: remove call to unimplemented set_GPIO_mode()   Mike Dunn
• [U-Boot] [PATCH v2 4/7] arm: bootm: call udc_disable()before booting linux   Mike Dunn
• [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel   Mike Dunn
• [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash   Mike Dunn
• [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board   Mike Dunn
• [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot   Mike Dunn
• [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel   Mike Dunn
• [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board   Mike Dunn
• [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash   Mike Dunn
• [U-Boot] [PATCH v3 0/8] palm treo 680 smartphone board support   Mike Dunn
• [U-Boot] [PATCH v3 1/8] pxa_lcd: add the ACX544AKN lcd device   Mike Dunn
• [U-Boot] [PATCH v3 2/8] pxa_lcd: make lcd_enable() a weak pointer   Mike Dunn
• [U-Boot] [PATCH v3 3/8] pxa27x_udc: remove call to unimplemented set_GPIO_mode()   Mike Dunn
• [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux   Mike Dunn
• [U-Boot] [PATCH 5/8] lib: import bitrev library from the linux kernel   Mike Dunn
• [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash   Mike Dunn
• [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board   Mike Dunn
• [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support   Mike Dunn
• [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board   Mike Dunn
• [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board   Mike Dunn
• [U-Boot] [PATCH v4] add support for the palm treo 680 board   Mike Dunn
• [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux   Mike Dunn
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Mike Dunn
• [U-Boot] [PATCH v5] add support for the palm treo 680 board   Mike Dunn
• [U-Boot] [PATCH v3 2/3] Add TI816X support   Andrew Dyer
• [U-Boot] [PATCH v3 3/3] Add TI816X evm board support   Andrew Dyer
• [U-Boot] [PATCH 0/6] Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Dirk Eibach
• [U-Boot] [PATCH 2/6] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY   Dirk Eibach
• [U-Boot] [PATCH 3/6] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0   Dirk Eibach
• [U-Boot] [PATCH 4/6] Add Atmel I2C tpm   Dirk Eibach
• [U-Boot] [PATCH 5/6] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM   Dirk Eibach
• [U-Boot] [PATCH 6/6] mpc85xx: Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH 0/11] Update gdsys ppc4xx-based boards   Dirk Eibach
• [U-Boot] [PATCH 01/11] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA   Dirk Eibach
• [U-Boot] [PATCH 02/11] powerpc/ppc4xx: Add gdsys mclink interface   Dirk Eibach
• [U-Boot] [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers   Dirk Eibach
• [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards   Dirk Eibach
• [U-Boot] [PATCH 05/11] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code   Dirk Eibach
• [U-Boot] [PATCH 06/11] powerpc/ppc4xx: Support gdsys multichannel iocon hardware   Dirk Eibach
• [U-Boot] [PATCH 07/11] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards   Dirk Eibach
• [U-Boot] [PATCH 08/11] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware   Dirk Eibach
• [U-Boot] [PATCH 09/11] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup   Dirk Eibach
• [U-Boot] [PATCH 10/11] powerpc/ppc4xx: Consider gdsys FPGA OSD size   Dirk Eibach
• [U-Boot] [PATCH 11/11] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards   Dirk Eibach
• [U-Boot] (WARNING!!! PGP with incorrect signature) Re: [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers   Eibach, Dirk
• [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Dirk Eibach
• [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Dirk Eibach
• [U-Boot] [PATCH 01/16] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Dirk Eibach
• [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Dirk Eibach
• [U-Boot] [PATCH v2 0/7] Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH v2 1/7] Update gdsys email account   Dirk Eibach
• [U-Boot] [PATCH v2 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Dirk Eibach
• [U-Boot] [PATCH v2 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY   Dirk Eibach
• [U-Boot] [PATCH v2 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0   Dirk Eibach
• [U-Boot] [PATCH v2 5/7] Add Atmel I2C tpm   Dirk Eibach
• [U-Boot] [PATCH v2 6/7] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM   Dirk Eibach
• [U-Boot] [PATCH v2 7/7] mpc85xx: Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH v3 0/7] Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH v3 1/7] Update gdsys email account   Dirk Eibach
• [U-Boot] [PATCH v3 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Dirk Eibach
• [U-Boot] [PATCH v3 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY   Dirk Eibach
• [U-Boot] [PATCH v3 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0   Dirk Eibach
• [U-Boot] [PATCH v3 5/7] Add Atmel I2C tpm   Dirk Eibach
• [U-Boot] [PATCH v3 6/7] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM   Dirk Eibach
• [U-Boot] [PATCH v3 7/7] mpc85xx: Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH v4 0/7] Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH v4 1/7] Update gdsys email account   Dirk Eibach
• [U-Boot] [PATCH v4 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Dirk Eibach
• [U-Boot] [PATCH v4 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY   Dirk Eibach
• [U-Boot] [PATCH v4 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0   Dirk Eibach
• [U-Boot] [PATCH v4 5/7] Add Atmel I2C tpm   Dirk Eibach
• [U-Boot] [PATCH v4 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM   Dirk Eibach
• [U-Boot] [PATCH v4 7/7] mpc85xx: Add gdsys ControlCenter Digital board   Dirk Eibach
• [U-Boot] [PATCH v4 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM   Dirk Eibach
• [U-Boot] [Patch v2] cmd/gpt: Support gpt command for all devices   Egbert Eich
• [U-Boot] [Patch v2] disk/part_dos: check harder for partition table   Egbert Eich
• [U-Boot] [Patch v2] disk/gpt: Fix GPT partition handling for blocksize != 512   Egbert Eich
• [U-Boot] [PATCH v2 0/4] Add Support for Storage Devices with Blocksizes != 512   Egbert Eich
• [U-Boot] [PATCH v2 1/4] disk/iso: Add Support for block sizes > 512 byte to ISO partition support   Egbert Eich
• [U-Boot] [PATCH v2 2/4] fs/fat: Don't multiply fatsize with sector size   Egbert Eich
• [U-Boot] [PATCH v2 3/4] part/dev_desc: Add log2 of blocksize to block_dev_desc data struct   Egbert Eich
• [U-Boot] [PATCH v2 4/4] fs/ext4: Support device block sizes != 512 bytes   Egbert Eich
• [U-Boot] [PATCH] Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH v4 0/3] i.MX6 SabreSD and SabreAUTO bmode support   Fabio Estevam
• [U-Boot] [PATCH] Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH] Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH 1/3] wandboard: Remove duplicate 'mmc dev'   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6qsabrelite: Remove duplicate 'mmc dev'   Fabio Estevam
• [U-Boot] [PATCH 3/3] wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM   Fabio Estevam
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Fabio Estevam
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Fabio Estevam
• [U-Boot] [PATCH 1/3] iomux-v3: Place pad control definitions into common file   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6: Add solo-lite variant support   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH] spi: mxc_spi: Set master mode for all channels   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH 2/8] pxa_lcd: make lcd_enable() a weak pointer   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: add NAND commands   Fabio Estevam
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Fabio Estevam
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Fabio Estevam
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Fabio Estevam
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: add trimffs to nand command   Fabio Estevam
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Fabio Estevam
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Fabio Estevam
• [U-Boot] [PATCH v2 1/3] iomux-v3: Place pad control definitions into common file   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] mx6: Add solo-lite variant support   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] mx6sl: Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH] mx31pdk: Remove watchdog support   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: add trimffs to nand command   Fabio Estevam
• [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels   Fabio Estevam
• [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels   Fabio Estevam
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Fabio Estevam
• [U-Boot] [PATCH] mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments   Fabio Estevam
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Fabio Estevam
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Fabio Estevam
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Fabio Estevam
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   Fabio Estevam
• [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support   Fabio Estevam
• [U-Boot] [PATCH 3/5] vybrid: add uart driver support   Fabio Estevam
• [U-Boot] [PATCH 5/5] vybrid: add ethernet driver support   Fabio Estevam
• [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support   Fabio Estevam
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Fabio Estevam
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Fabio Estevam
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Fabio Estevam
• [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register   Fabio Estevam
• [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register   Fabio Estevam
• [U-Boot] [PATCH] nitrogen6x: Setup CCM_CCOSR register   Fabio Estevam
• [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register   Fabio Estevam
• [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL   Fabio Estevam
• [U-Boot] [PATCH] mx51evk: Update environmet in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v2] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v2] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Fabio Estevam
• [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v4 1/2] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v4 2/2] mx51evk: Do not force the rootfs type   Fabio Estevam
• [U-Boot] [PATCH v5 1/2] mx51evk: Update environment in order to allow booting a dt kernel   Fabio Estevam
• [U-Boot] [PATCH v5 2/2] mx51evk: Do not force the rootfs type   Fabio Estevam
• [U-Boot] [PATCH] powerpc: Use lower case for the core names   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board   Fabio Estevam
• [U-Boot] [PATCH 3/6] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0   Fabio Estevam
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Fabio Estevam
• [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx53ard: Rework default environment to support FDT, MMC and netboot   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx5: Define a common get_board_rev()   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx5: Select CONFIG_REVISION_TAG   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx53ard: Move register masks into imx-regs.h   Fabio Estevam
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file   Fabio Estevam
• [U-Boot] mx23evk resets when loading the kernel   Fabio Estevam
• [U-Boot] mx23evk resets when loading the kernel   Fabio Estevam
• [U-Boot] mx23evk resets when loading the kernel   Fabio Estevam
• [U-Boot] mx23evk resets when loading the kernel   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] [PATCH] mx23: Fix the size of internal RAM   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Fabio Estevam
• [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board   Fabio Estevam
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Fabio Estevam
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Fabio Estevam
• [U-Boot] [PATCH] kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH   Gerlando Falauto
• [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board   Igor Ferrara
• [U-Boot] R: Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board   Igor Ferrara
• [U-Boot] recommended method of netbooting kernel/dtb in u-boot?   Chris Friesen
• [U-Boot] [PATCH v1] mmc: bfin: Ensure MMR writing is done before next command.   Mike Frysinger
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Andrew Gabbasov
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Gabbasov, Andrew
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Gabbasov, Andrew
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Gabbasov, Andrew
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Gabbasov, Andrew
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Gabbasov, Andrew
• [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop   Andrew Gabbasov
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Gabbasov, Andrew
• [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses   Andrew Gabbasov
• [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Andrew Gabbasov
• [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses   Gabbasov, Andrew
• [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure   Gabbasov, Andrew
• [U-Boot] uboot_porting_guide   Carmine Garripoli
• [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout   Vivek Gautam
• [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout   Vivek Gautam
• [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout   Vivek Gautam
• [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition   Vivek Gautam
• [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition   Vivek Gautam
• [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition   Vivek Gautam
• [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition   Vivek Gautam
• [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor   Vivek Gautam
• [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives   Vivek Gautam
• [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports   Vivek Gautam
• [U-Boot] [PATCH 6/7] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports   Vivek Gautam
• [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor   Vivek Gautam
• [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives   Vivek Gautam
• [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives   Vivek Gautam
• [U-Boot] USB3.0 Interrupt transfer in u-boot   Vivek Gautam
• [U-Boot] [PATCH v2 0/5] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v2 1/5] USB: Some cleanup prior to USB 3.0 interface addition   Vivek Gautam
• [U-Boot] [PATCH v2 2/5] usb: hub: Power-cycle on root-hub ports   Vivek Gautam
• [U-Boot] [PATCH v2 3/5] usb: Update device class in usb device's descriptor   Vivek Gautam
• [U-Boot] [PATCH v2 4/5] usb: hub: Fix enumration timeout   Vivek Gautam
• [U-Boot] [PATCH v2 5/5] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [PATCH v2 0/5] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v3 1/8] usb: common: Weed out USB_**_PRINTFs from usb framework   Vivek Gautam
• [U-Boot] [PATCH v3 2/8] USB: Some cleanup prior to USB 3.0 interface addition   Vivek Gautam
• [U-Boot] [PATCH v3 3/8] usb: hub: Power-cycle on root-hub ports   Vivek Gautam
• [U-Boot] [PATCH v3 4/8] usb: Update device class in usb device's descriptor   Vivek Gautam
• [U-Boot] [PATCH v3 5/8] usb: hub: Fix enumration timeout   Vivek Gautam
• [U-Boot] [PATCH v3 6/8] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [PATCH v3 7/8] usb: hub: Reset only usb 2.0 ports   Vivek Gautam
• [U-Boot] [PATCH v3 8/8] usb: common: Use a global macro for 'min3'   Vivek Gautam
• [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode   Vivek Gautam
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Vivek Gautam
• [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'   Vivek Gautam
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports   Vivek Gautam
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports   Vivek Gautam
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Vivek Gautam
• [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports   Vivek Gautam
• [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'   Vivek Gautam
• [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'   Vivek Gautam
• [U-Boot] [PATCH 0/3] usb: ss: Fixes for super speed framework   Vivek Gautam
• [U-Boot] [PATCH 1/3] usb: hub: Parallelize power-cycling of root-hub ports   Vivek Gautam
• [U-Boot] [PATCH 2/3] usb: fix: Fixing Port status and feature number constants   Vivek Gautam
• [U-Boot] [PATCH 3/3] usb: common: Use a global definition for 'min3'   Vivek Gautam
• [U-Boot] [PATCH 3/3] usb: common: Use a global definition for 'min3'   Vivek Gautam
• [U-Boot] [PATCH 0/3] usb: ss: Fixes for super speed framework   Vivek Gautam
• [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports   Vivek Gautam
• [U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo   Simon Glass
• [U-Boot] Patches for this merge window   Simon Glass
• [U-Boot] [PATCH 0/4] Add support for TI TPS65090   Simon Glass
• [U-Boot] [PATCH 1/4] power: Add support for TPS65090 PMU chip.   Simon Glass
• [U-Boot] [PATCH 2/4] exynos5: Enable tps65090 on smdk5250   Simon Glass
• [U-Boot] [PATCH 3/4] power: Explicitly select pmic device's bus   Simon Glass
• [U-Boot] [PATCH 4/4] exynos5: support tps65090 pmic   Simon Glass
• [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay   Simon Glass
• [U-Boot] [PATCH] mmc: Define a constant for the maximum block size   Simon Glass
• [U-Boot] [PATCH] usb: net: Move software resets to basic_init   Simon Glass
• [U-Boot] [PATCH] patman: Ignore all Gerrit Commit-* tags   Simon Glass
• [U-Boot] [PATCH v5 8/8] buildman - U-Boot multi-threaded builder and summary tool   Simon Glass
• [U-Boot] [PATCH 2/4 V4] EXYNOS5: FDT: Add serial device node values   Simon Glass
• [U-Boot] [PATCH 3/4 V4] S5P: Serial: Add fdt support to driver   Simon Glass
• [U-Boot] [PATCH v4 1/7] cros: add cros_ec driver   Simon Glass
• [U-Boot] [PATCH v4 2/7] cros: add I2C support for cros_ec   Simon Glass
• [U-Boot] [PATCH v4 3/7] cros: add SPI support for cros_ec   Simon Glass
• [U-Boot] [PATCH v4 4/7] cros: add LPC support for cros_ec   Simon Glass
• [U-Boot] [PATCH v4 5/7] cros: adds cros_ec keyboard driver   Simon Glass
• [U-Boot] [PATCH v4 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts   Simon Glass
• [U-Boot] [PATCH v4 7/7] cros: enable cros-ec for smdk5250   Simon Glass
• [U-Boot] [PATCH v4 0/7] Add cros-ec protocol driver and enable it in smdk5250   Simon Glass
• [U-Boot] [STATUS] v2013.04-rc2 released   Simon Glass
• [U-Boot] Patman / buildman pull request   Simon Glass
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Simon Glass
• [U-Boot] Patman / buildman pull request   Simon Glass
• [U-Boot] [STATUS] v2013.04-rc2 released   Simon Glass
• [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot   Simon Glass
• [U-Boot] [PATCH v2 1/3] tpm: Add casts for proper compilation   Simon Glass
• [U-Boot] [PATCH v2 2/3] tpm: Add Infineon slb9635_i2c TPM driver   Simon Glass
• [U-Boot] [PATCH v2 3/3] exynos: Enable I2C TPM for smdk5250   Simon Glass
• [U-Boot] [PATCH 1/5] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Simon Glass
• [U-Boot] [PATCH 2/5] x86: config: Reflect the name changes of LPC TPM configs   Simon Glass
• [U-Boot] [PATCH 3/5] tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C)   Simon Glass
• [U-Boot] [PATCH 4/5] tpm: Reorganize the I2C TPM driver   Simon Glass
• [U-Boot] [PATCH 5/5] exynos: config: Reflect the name changes of I2C TPM configs   Simon Glass
• [U-Boot] Pending TPM patches for release   Simon Glass
• [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode   Simon Glass
• [U-Boot] [PATCH 1/2] exynos: Correct use of 64-bit division   Simon Glass
• [U-Boot] [PATCH 2/2] exynos: fdt: Add TMU node for snow   Simon Glass
• [U-Boot] [PATCH] Provide more useful debugging when an initcall fails   Simon Glass
• [U-Boot] [PATCH 1/3] x86: Fix DRAM bank size init with generic board   Simon Glass
• [U-Boot] [PATCH 2/3] x86: Allow setup code to manage its own global data   Simon Glass
• [U-Boot] [PATCH 3/3] x86: config: Init PCI before SPI   Simon Glass
• [U-Boot] [STATUS] v2013.04-rc3 released   Simon Glass
• [U-Boot] [PATCH 3/3] x86: config: Init PCI before SPI   Simon Glass
• [U-Boot] [PATCH] Fix wrong >4G filtering   Simon Glass
• [U-Boot] U-Boot under coreboot   Simon Glass
• [U-Boot] [PATCH] i386 compiler args are wrong   Simon Glass
• [U-Boot] Improper assumption of serial port   Simon Glass
• [U-Boot] [PATCH] VGA text console support   Simon Glass
• [U-Boot] [PATCH] powerpc: Add support for CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH] Provide more useful debugging when an initcall fails   Simon Glass
• [U-Boot] [PATCH v2] patman: fix gitutil for decorations   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH] Fix wrong >4G filtering   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] [PATCH v4 7/7] cros: enable cros-ec for smdk5250   Simon Glass
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Simon Glass
• [U-Boot] [PATCH v2] patman: fix gitutil for decorations   Simon Glass
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Simon Glass
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Simon Glass
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Simon Glass
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Simon Glass
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Simon Glass
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Simon Glass
• [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage   Simon Glass
• [U-Boot] [PATCH 01/19] x86: Remove unused bios/pci code   Simon Glass
• [U-Boot] [PATCH 02/19] x86: Remove unused portion of link script   Simon Glass
• [U-Boot] [PATCH 03/19] x86: Remove legacy board init code   Simon Glass
• [U-Boot] [PATCH 04/19] x86: Declare global_data pointer when it is used   Simon Glass
• [U-Boot] [PATCH 05/19] x86: Implement panic output for coreboot   Simon Glass
• [U-Boot] [PATCH 06/19] x86: Rationalise kernel booting logic and bootstage   Simon Glass
• [U-Boot] [PATCH 07/19] x86: Add TSC timer   Simon Glass
• [U-Boot] [PATCH 08/19] x86: Remove old broken timer implementation   Simon Glass
• [U-Boot] [PATCH 09/19] x86: Remove ISR timer   Simon Glass
• [U-Boot] [PATCH 10/19] x86: Re-enable PCAT timer 2 for beeping   Simon Glass
• [U-Boot] [PATCH 11/19] bootstage: Add stubs for new bootstage functions   Simon Glass
• [U-Boot] [PATCH 12/19] bootstage: Copy bootstage strings post-relocation   Simon Glass
• [U-Boot] [PATCH 13/19] Call bootstage_relocate() after malloc is initted   Simon Glass
• [U-Boot] [PATCH 14/19] x86: Enable bootstage for coreboot   Simon Glass
• [U-Boot] [PATCH 15/19] bootstage: Allow marking a particular line of code   Simon Glass
• [U-Boot] [PATCH 16/19] x86: Fix warning in cmd_ximg.c when CONFIG_GZIP is not defined   Simon Glass
• [U-Boot] [PATCH 17/19] x86: config: Enable LZO for coreboot, remove zlib, gzip   Simon Glass
• [U-Boot] [PATCH 18/19] x86: Support adding coreboot timestanps to bootstage   Simon Glass
• [U-Boot] [PATCH 19/19] x86: Add coreboot timestamps   Simon Glass
• [U-Boot] [U-boot] Help: how to use AES crypto   Simon Glass
• [U-Boot] status i2c uboot driver ST Microelectronics   Simon Glass
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Simon Glass
• [U-Boot] [PATCH v2] crc32: Correct endianness of crc32 result   Simon Glass
• [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements   Simon Glass
• [U-Boot] [PATCH v3 01/17] Trigger generic board error only when building   Simon Glass
• [U-Boot] [PATCH v3 02/17] sandbox: Provide a way to map from host RAM to U-Boot RAM   Simon Glass
• [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board   Simon Glass
• [U-Boot] [PATCH v3 04/17] sandbox: Use generic board init   Simon Glass
• [U-Boot] [PATCH v3 05/17] sandbox: Remove old board init code   Simon Glass
• [U-Boot] [PATCH v3 06/17] sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host file   Simon Glass
• [U-Boot] [PATCH v3 07/17] fdt: Add a parameter to fdt_valid()   Simon Glass
• [U-Boot] [PATCH v3 08/17] Add getenv_hex() to return an environment variable as hex   Simon Glass
• [U-Boot] [PATCH v3 09/17] fdt: Allow fdt command to check and update control FDT   Simon Glass
• [U-Boot] [PATCH v3 10/17] sandbox: fdt: Support fdt command for sandbox   Simon Glass
• [U-Boot] [PATCH v3 11/17] fdt: Skip checking FDT if the pointer is NULL   Simon Glass
• [U-Boot] [PATCH v3 12/17] Revert "fdt- Tell the FDT library where the device tree is"   Simon Glass
• [U-Boot] [PATCH v3 13/17] sandbox: Allow -c argument to provide a command list   Simon Glass
• [U-Boot] [PATCH v3 14/17] sandbox: Support 'source' command   Simon Glass
• [U-Boot] [PATCH v3 15/17] fs: Add support for saving data to filesystems   Simon Glass
• [U-Boot] [PATCH v3 16/17] sandbox: fs: Add support for saving files to host filesystem   Simon Glass
• [U-Boot] [PATCH v3 17/17] sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FIT   Simon Glass
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Simon Glass
• [U-Boot] Driver Model Thoughts   Simon Glass
• [U-Boot] [PATCH v3 0/19] Allow images to work on sandbox   Simon Glass
• [U-Boot] [PATCH v3 01/19] env: Fix minor comment typos in cmd_nvedit   Simon Glass
• [U-Boot] [PATCH v3 02/19] Add minor updates to README.fdt-control   Simon Glass
• [U-Boot] [PATCH v3 03/19] hash: Add a way to calculate a hash for any algortihm   Simon Glass
• [U-Boot] [PATCH v3 04/19] bootstage: Don't build for HOSTCC   Simon Glass
• [U-Boot] [PATCH v3 05/19] mkimage: Move ARRAY_SIZE to header file   Simon Glass
• [U-Boot] [PATCH v3 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration   Simon Glass
• [U-Boot] [PATCH v3 07/19] image: Move timestamp #ifdefs to header file   Simon Glass
• [U-Boot] [PATCH v3 08/19] image: Export fit_check_ramdisk()   Simon Glass
• [U-Boot] [PATCH v3 09/19] image: Split FIT code into new image-fit.c   Simon Glass
• [U-Boot] [PATCH v3 10/19] image: Move HOSTCC image code to tools/   Simon Glass
• [U-Boot] [PATCH v3 11/19] image: Split hash node processing into its own function   Simon Glass
• [U-Boot] [PATCH v3 12/19] image: Convert fit_image_hash_set_value() to static, and rename   Simon Glass
• [U-Boot] [PATCH v3 13/19] image: Rename fit_image_check_hashes() to fit_image_verify()   Simon Glass
• [U-Boot] [PATCH v3 14/19] image: Move hash checking into its own function   Simon Glass
• [U-Boot] [PATCH v3 15/19] image: Move error! string to common place   Simon Glass
• [U-Boot] [PATCH v3 16/19] image: Export fit_conf_get_prop_node()   Simon Glass
• [U-Boot] [PATCH v3 17/19] image: Rename fit_add_hashes() to fit_add_verification_data()   Simon Glass
• [U-Boot] [PATCH v3 18/19] image: Rename hash printing to fit_image_print_verification_data()   Simon Glass
• [U-Boot] [PATCH v3 19/19] sandbox: image: Add support for booting images in sandbox   Simon Glass
• [U-Boot] Driver Model Thoughts   Simon Glass
• [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements   Simon Glass
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Simon Glass
• [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH v2 10/15] sf: Enable FDT-based configuration and memory mapping   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Simon Glass
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Simon Glass
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Simon Glass
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Simon Glass
• [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo   Simon Glass
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH v3 0/5] consolidate hang()   Simon Glass
• [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [PATCH v4 03/15] sandbox: Switch over to generic board   Simon Glass
• [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board   Simon Glass
• [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements   Simon Glass
• [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo   Simon Glass
• [U-Boot] [PATCH 07/19] x86: Add TSC timer   Simon Glass
• [U-Boot] [PATCH 10/19] x86: Re-enable PCAT timer 2 for beeping   Simon Glass
• [U-Boot] [PATCH v2 07/16] x86: Replace timer implementation with TSC timer   Simon Glass
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Simon Glass
• [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze   Simon Glass
• [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO   Simon Glass
• [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo   Simon Glass
• [U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot   Simon Glass
• [U-Boot] [RFC PATCH 01/15] bootstage; Correct printf types   Simon Glass
• [U-Boot] [RFC PATCH 02/15] Add function to print a number with grouped digits   Simon Glass
• [U-Boot] [RFC PATCH 03/15] Add trace library   Simon Glass
• [U-Boot] [RFC PATCH 04/15] Add a trace command   Simon Glass
• [U-Boot] [RFC PATCH 05/15] Support tracing in config.mk when enabled   Simon Glass
• [U-Boot] [RFC PATCH 06/15] Add trace support to generic board   Simon Glass
• [U-Boot] [RFC PATCH 07/15] Add proftool to decode profile data   Simon Glass
• [U-Boot] [RFC PATCH 08/15] sandbox: Support trace feature   Simon Glass
• [U-Boot] [RFC PATCH 09/15] Add a simple test for sandbox trace   Simon Glass
• [U-Boot] [RFC PATCH 10/15] Clarify bootm OS arguments   Simon Glass
• [U-Boot] [RFC PATCH 11/15] Refactor the bootm command to reduce code duplication   Simon Glass
• [U-Boot] [RFC PATCH 12/15] Add a 'fake' go command to the bootm command   Simon Glass
• [U-Boot] [RFC PATCH 13/15] arm: Implement the 'fake' go command   Simon Glass
• [U-Boot] [RFC PATCH 14/15] Show stdout on error in fit-test   Simon Glass
• [U-Boot] [RFC PATCH 15/15] exynos: Avoid function instrumentation for microsecond timer   Simon Glass
• [U-Boot] what is sandbox?   Simon Glass
• [U-Boot] [U-Boot, v6, 4/9] nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters   Igor Grinberg
• [U-Boot] [PATCH 1/3] cm-t35: move cm-t35 to live in compulab directory   Igor Grinberg
• [U-Boot] [PATCH 2/3] MAINTAINERS: fix the cm-t35 board name   Igor Grinberg
• [U-Boot] [PATCH 3/3] cm-t35: update config file   Igor Grinberg
• [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230   Shawn Guo
• [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230   Shawn Guo
• [U-Boot] Banner -> git co target?   Anatolij Gustschin
• [U-Boot] [PATCH] video: bcm2835: fix build issues   Anatolij Gustschin
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Anatolij Gustschin
• [U-Boot] [PATCH] post: fix I2C POST failure for devices in CONFIG_SYS_POST_I2C_IGNORES   Anatolij Gustschin
• [PATCH] imx_watchdog: do not soft-reset while watchdog init   Anatolij Gustschin
• [U-Boot] Displaying characters on the display in u-boot   Anatolij Gustschin
• [U-Boot] [PATCH] Fix references to the documentation files   Anatolij Gustschin
• [U-Boot] [PATCH] p1020rdb-pd: platform support   Haijun.Zhang
• [U-Boot] [PATCH] Add NanoBone board support   Hebbar, Gururaja
• [U-Boot] [PATCH] Add NanoBone board support   Hebbar, Gururaja
• [U-Boot] [PATCH] env_mmc: add support for redundant environment   Michael Heimpold
• [U-Boot] [PATCH RESEND] env_mmc: add support for redundant environment   Michael Heimpold
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Paul B. Henson
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Paul B. Henson
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Paul B. Henson
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Paul B. Henson
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Paul B. Henson
• [U-Boot] CONFIG_FIT on mx28evk board   Paul B. Henson
• [U-Boot] mx28evk initramfs load address   Paul B. Henson
• [U-Boot] u-boot UBI support   Paul B. Henson
• [U-Boot] u-boot UBI support   Paul B. Henson
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Paul B. Henson
• [U-Boot] u-boot UBI support   Paul B. Henson
• [U-Boot] env: fix potential stack overflow in environment functions   Rob Herring
• [U-Boot] env: fix potential stack overflow in environment functions   Rob Herring
• [U-Boot] env: fix potential stack overflow in environment functions   Rob Herring
• [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot   Rob Herring
• [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo   Pavel Herrmann
• [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo   Pavel Herrmann
• [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo   Pavel Herrmann
• [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment   Joe Hershberger
• [U-Boot] [PATCH v3 1/7] ubi: Fix broken cleanup code in attach_by_scanning   Joe Hershberger
• [U-Boot] [PATCH v3 2/7] ubi: Expose a few simple functions from the cmd_ubi   Joe Hershberger
• [U-Boot] [PATCH v3 3/7] ubi: ubifs: Add documentation for README   Joe Hershberger
• [U-Boot] [PATCH v3 4/7] ubi: ubifs: Turn off verbose prints   Joe Hershberger
• [U-Boot] [PATCH v3 5/7] mtd: Make mtdparts work with pre-reloc env   Joe Hershberger
• [U-Boot] [PATCH v3 6/7] env: Add support for UBI environment   Joe Hershberger
• [U-Boot] [PATCH v3 7/7] env: Add redundant env support to UBI env   Joe Hershberger
• [U-Boot] bootm does not work if netconsole is enabled   Joe Hershberger
• [U-Boot] bootm does not work if netconsole is enabled   Joe Hershberger
• [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment   Joe Hershberger
• [U-Boot] [PATCH] net: nfs: add dynamic wait period   Joe Hershberger
• [U-Boot] [PATCH][Upstream] cmd_sf: include header file common.h before div64.h   Mingkai Hu
• [U-Boot] [PATCH] powpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t   Mingkai Hu
• [U-Boot] [PATCH] powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t   Mingkai Hu
• [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support   Wang Huan-B18965
• [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support   Wang Huan-B18965
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   Wang Huan-B18965
• [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support   Wang Huan-B18965
• [U-Boot] [PATCH 3/5] vybrid: add uart driver support   Wang Huan-B18965
• [U-Boot] [PATCH 4/5] vybrid: add eSDHC driver support   Wang Huan-B18965
• [U-Boot] AM3517_EVM, MLO not booting   Manfred Huber
• [U-Boot] [PATCH v1 1/1] omap3: Display MHz instead of mHz on the console   Manfred Huber
• [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support   Liu Hui-R64343
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   Liu Hui-R64343
• [U-Boot] [PATCH 0/4] omap2420-h4: Fix u-boot support for board   Jon Hunter
• [U-Boot] [PATCH 1/4] omap2420-h4: Fix DRAM initialisation   Jon Hunter
• [U-Boot] [PATCH 2/4] omap2420-h4: Fix booting from NOR flash   Jon Hunter
• [U-Boot] [PATCH 3/4] omap2420-h4: Add device tree support   Jon Hunter
• [U-Boot] [PATCH 4/4] omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ   Jon Hunter
• [U-Boot] [PATCH 4/4] omap2420h4: Fix get_timer() and CONFIG_SYS_HZ   Jon Hunter
• [U-Boot] [PATCH 4/4] omap2420h4: Fix get_timer() and CONFIG_SYS_HZ   Jon Hunter
• [U-Boot] [PATCH 0/5] omap5912-osk: Fix u-boot support for board   Jon Hunter
• [U-Boot] [PATCH 1/5] omap5912-osk: Fix DRAM initialisation   Jon Hunter
• [U-Boot] [PATCH 2/5] omap5912-osk: Fix booting from NOR flash   Jon Hunter
• [U-Boot] [PATCH 3/5] omap5912-osk: Fix device initialisation   Jon Hunter
• [U-Boot] [PATCH 4/5] omap5912-osk: Increase flash partition for u-boot   Jon Hunter
• [U-Boot] [PATCH 5/5] omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ   Jon Hunter
• [U-Boot] u-boot boot process is broken, how do i recover?   JPT
• [U-Boot] u-boot boot process is broken, how do i recover?   JPT
• [U-Boot] u-boot boot process is broken, how do i recover?   JPT
• [U-Boot] which u-boot build config to choose for kirkwood?   JPT
• [U-Boot] problem building uboot   JPT
• [U-Boot] build succeeded, what now?   JPT
• [U-Boot] how to troubleshoot when u-boot is stuck   JPT
• [U-Boot] offer: program to deal with kirkwood "boot from UART"   JPT
• [U-Boot] offer: program to deal with kirkwood "boot from UART"   JPT
• [U-Boot] Build failure on am335x_evm   Mark Jackson
• [U-Boot] Build failure on am335x_evm   Mark Jackson
• [U-Boot] How do I use AM335x eth1 rather than eth0 ?   Mark Jackson
• [U-Boot] How do I use AM335x eth1 rather than eth0 ?   Mark Jackson
• [U-Boot] How do I use AM335x eth1 rather than eth0 ?   Mark Jackson
• [U-Boot] How do I use AM335x eth1 rather than eth0 ? [SOLVED]   Mark Jackson
• [U-Boot] How do I use AM335x eth1 rather than eth0 ? [SOLVED]   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Remove duplicate / unused #defines on AM335x boards   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH v2] Add NanoBone board support   Mark Jackson
• [U-Boot] [PATCH]board/bsc9131rdb: Add targets for Sysclk 100MHz   Priyanka Jain
• [U-Boot] [PATCH] board/bsc9131rdb: Add DSP side tlb and laws   Priyanka Jain
• [U-Boot] [PATCH] board/bsc9131rdb: Update default boot environment settings   Priyanka Jain
• [U-Boot] P2020RDB: Error while using P2020RDB_SDCARD   Franck Jullien
• [U-Boot] P2020RDB: Error while using P2020RDB_SDCARD   Franck Jullien
• [U-Boot] Displaying characters on the display in u-boot   Bhargav A K
• [U-Boot] Displaying characters on the display in u-boot   Bhargav A K
• [U-Boot] [PATCH 00/11 v3] Fix and Re-organise PWM Timer   Minkyu Kang
• [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy   Minkyu Kang
• [U-Boot] [PATCH V7 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C   Minkyu Kang
• [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature   Minkyu Kang
• [U-Boot] [PATCH 2/2] samsung: trats2: add support for new board Trats2   Minkyu Kang
• [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature   Minkyu Kang
• [U-Boot] [PATCH] exynos: change indentation of defines in cpu.h   Minkyu Kang
• [U-Boot] Warning messages in latest u-boot-samsung   Minkyu Kang
• [U-Boot] [PATCH] exynos: change indentation of defines in cpu.h   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition   Minkyu Kang
• [U-Boot] [PATCH v2 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics   Minkyu Kang
• [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode   Minkyu Kang
• [U-Boot] [PATCH 1/2] exynos: Correct use of 64-bit division   Minkyu Kang
• [U-Boot] [PATCH 2/2] exynos: fdt: Add TMU node for snow   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [STATUS] v2013.04-rc3 released   Minkyu Kang
• [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature   Minkyu Kang
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Minkyu Kang
• [U-Boot] [PATCH] powerpc: CONFIG_OF_CONTROL support   Jonathan Klee
• [U-Boot] [PATCH] powerpc: Add support for CONFIG_OF_CONTROL   Jonathan Klee
• [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v2] BUGFIX: arm: data abort in get_bad_stack_swi   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v2] BUGFIX: arm: data abort in get_bad_stack_swi   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v3] BUGFIX: arm: data abort in get_bad_stack_swi   Tetsuyuki Kobayashi
• [U-Boot] [PATCH v3] BUGFIX: arm: data abort in get_bad_stack_swi   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] am335x: Enable MMC1 clock   Peter Korsgaard
• [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC   Peter Korsgaard
• [U-Boot] [PATCH 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat)   Peter Korsgaard
• [U-Boot] [PATCH] am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO   Peter Korsgaard
• [U-Boot] [PATCH] video: exynos_fb: Add the missing #else clause   Ajay Kumar
• [U-Boot] [PATCH] nand/fsl_ifc: Convert to self-init   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [v3] new SPL support for IFC based Feescale platforms   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v3] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 4/5][v3] board/bsc9131rdb:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 5/5][v3] board/bsc9132qds:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [v4] new SPL support for IFC based Feescale platforms   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/5][v4] powerpc/mpc85xx: new SPL support for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/5][v4] board/p1010rdb:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 4/5][v4] board/bsc9131rdb:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 5/5][v4] board/bsc9132qds:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [v5] new SPL support for IFC based Feescale platforms   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/5][v5] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/5][v5] powerpc/mpc85xx: new SPL support for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/5][v5] board/p1010rdb:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [PATCH 5/5][v5] board/bsc9132qds:Add NAND boot support using new SPL format   Prabhakar Kushwaha
• [U-Boot] [STATUS] v2013.04-rc2 released   Mats Kärrman
• [U-Boot] fatwrite problem   Mats Kärrman
• [U-Boot] status i2c uboot driver ST Microelectronics   Mathias LEBLANC
• [U-Boot] status i2c uboot driver ST Microelectronics   Mathias LEBLANC
• [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support   Chunhe Lan
• [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support   Chunhe Lan
• [U-Boot] [PATCH] video: exynos_fb: Add the missing #else clause   Donghwa Lee
• [U-Boot] [PATCH] PHY: micrel.c: supplement support for KSZ9031   SARTRE Leo
• [U-Boot] [PATCH] net: phy: supplement support for Micrel's KSZ9031   SARTRE Leo
• [U-Boot] uboot newbie question on booting ep405 board   David Li
• [U-Boot] uboot newbie question on booting ep405 board   David Li
• [U-Boot] uboot newbie question on booting ep405 board   David Li
• [U-Boot] which version of uboot support ARM A7   Li, Hai
• [U-Boot] dtb vs. kernel command line arguments   Grant Likely
• [U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support   Jim Lin
• [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114   Jim Lin
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Jim Lin
• [U-Boot] [PATCH 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function   Jim Lin
• [U-Boot] [PATCH 1/2] powerpc/85xx: Add C29x SoC support   Po Liu
• [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board   Po Liu
• [U-Boot] [PATCH 1/2] dfu:ext4:fix: Change ext4write command order of parameters   Lukasz Majewski
• [U-Boot] [PATCH 2/2] dfu: Increase DFU buffer size from 4MiB to 8MiB   Lukasz Majewski
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Lukasz Majewski
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Allen Martin
• [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support   Peter Maydell
• [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support   Peter Maydell
• [U-Boot] [PATCH V3 00/10] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups   Nishanth Menon
• [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0   Nishanth Menon
• [U-Boot] [PATCH v2] OMAP5: I2C: Add I2C4 and I2C5 bases   Nishanth Menon
• [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0   Nishanth Menon
• [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0   Nishanth Menon
• [U-Boot] [PATCH 2/2] omap5_uevm: Enable redudnant MMC environment   Nishanth Menon
• [U-Boot] [PATCH] powpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t   Hu Mingkai-B21284
• [U-Boot] Unable to build u-boot for Marvell Aspenite board   Fabrice Mousset
• [U-Boot] [UBOOT PATCH 1/2] ARM:Panda:Fix device tree loading for the panda-es   Dan Murphy
• [U-Boot] [UBOOT PATCH 2/2] ARM: Panda: Add flag to allow runtime enviroment varibale mods   Dan Murphy
• [U-Boot] [UBOOT PATCH 1/2] ARM:Panda:Fix device tree loading for the panda-es   Dan Murphy
• [U-Boot] [UBOOT PATCH 2/2] ARM: Panda: Add flag to allow runtime enviroment varibale mods   Dan Murphy
• [U-Boot] [UBOOT PATCH 1/2] ARM:Panda:Fix device tree loading for the panda-es   Dan Murphy
• [U-Boot] [UBOOT PATCH 2/2] ARM: Panda: Add flag to allow runtime enviroment varibale mods   Dan Murphy
• [U-Boot] [PATCH] Add initial support for mx6slevk board   Vikram Narayanan
• [U-Boot] [PATCH] Add initial support for mx6slevk board   Vikram Narayanan
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Eric Nelson
• [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Eric Nelson
• [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command   Eric Nelson
• [U-Boot] [PATCH] fsl_esdhc: flush cache after IO completion   Eric Nelson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion   Eric Nelson
• [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register   Eric Nelson
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Robert Nelson
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Robert Nelson
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Robert Nelson
• [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux   Julius Hemanth P
• [U-Boot] Query   Ujjwal Zamad - PES
• [U-Boot] [PATCH] mx35 iomux: correct offset of IOMUXSW_INPUT_CTL register   Philip Paeps
• [U-Boot] [PATCH v2] mx35 iomux: correct offsets of IOMUX registers   Philip Paeps
• [U-Boot] i.MX3 NAND: trying to understand OOB handling   Philip Paeps
• [U-Boot] i.MX3 NAND: trying to understand OOB handling   Philip Paeps
• [U-Boot] [PATCH] mx35 iomux: correct input select register index   Philip Paeps
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Philip Paeps
• [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5   Philip Paeps
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Philip Paeps
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Philip Paeps
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Philip Paeps
• [U-Boot] Add filesystem support   Pietro Paolini
• [U-Boot] Add filesystem support   Pietro Paolini
• [U-Boot] u-boot boot process is broken, how do i recover?   Thomas Petazzoni
• [U-Boot] u-boot boot process is broken, how do i recover?   Thomas Petazzoni
• [U-Boot] [STATUS] v2013.04-rc2 released   Pfau, Reinhard
• [U-Boot] [PATCH] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Reinhard Pfau
• [U-Boot] (Mixed security state) Re: [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Pfau, Reinhard
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Kim Phillips
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Kim Phillips
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Trent Piepho
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Trent Piepho
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Trent Piepho
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Trent Piepho
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Trent Piepho
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Trent Piepho
• [U-Boot] [PATCH] pcm051: Enable DDR PHY dynamic power down bit   Lars Poeschel
• [U-Boot] [PATCH] OMAP5: Power: Added more functionality to twl6035 driver   Lubomir Popov
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] [PATCH] OMAP4/5: Add USB EHCI support   Lubomir Popov
• [U-Boot] [PATCH] OMAP5: Enable USB Ethernet support with LAN9730   Lubomir Popov
• [U-Boot] Subject: [PATCH 1/2] OMAP4: Add ID for OMAP4470_ES1_0   Lubomir Popov
• [U-Boot] [PATCH 2/2] OMAP4: Add basic support for OMAP4470/TWL6032   Lubomir Popov
• [U-Boot] [PATCH 0/1] OMAP4/5: I2C: New read/write/probe functions   Lubomir Popov
• [U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP: Fix copy-paste bug that did not enable UART4 clock   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP5: I2C: Add I2C4 and I2C5 bases   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work   Lubomir Popov
• [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks   Lubomir Popov
• [U-Boot] [PATCH V3 0/3] OMAP5: I2C: Enable support of I2C4 and I2C5 buses   Lubomir Popov
• [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks   Lubomir Popov
• [U-Boot] [PATCH V3 2/3] OMAP5: I2C: Add I2C4 and I2C5 bases   Lubomir Popov
• [U-Boot] [PATCH V3 3/3] OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5   Lubomir Popov
• [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks   Lubomir Popov
• [U-Boot] [PATCH V4 0/3] OMAP5: I2C: Enable support of I2C4 and I2C5 buses   Lubomir Popov
• [U-Boot] [PATCH V4 1/3] OMAP5: I2C: Enable i2c5 clocks   Lubomir Popov
• [U-Boot] [PATCH V4 2/3] OMAP5: I2C: Add I2C4 and I2C5 bases   Lubomir Popov
• [U-Boot] [PATCH V4 3/3] OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5   Lubomir Popov
• [U-Boot] [PATCH] OMAP4: Fix bug in omap4460_volts struct   Lubomir Popov
• [U-Boot] [PATCH v3] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work   Lubomir Popov
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Lubomir Popov
• [U-Boot] Problems with Linker Symbols to make HAB on i.MX28 work   Christopher Preschern
• [U-Boot] [PATCH] ARMv7: start.S: stay in HYP mode if u-boot is entered in it   Andre Przywara
• [U-Boot] [PATCH 0/5] ARM: vexpress: add support for more core tiles   Andre Przywara
• [U-Boot] [PATCH 1/5] ARM: vexpress: move files in preparation for adding a new platform   Andre Przywara
• [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config   Andre Przywara
• [U-Boot] [PATCH 3/5] ARM: vexpress: create A5 specific board config   Andre Przywara
• [U-Boot] [PATCH 4/5] ARM: vexpress: add support for Versatile Express Cortex-A15-TC2   Andre Przywara
• [U-Boot] [PATCH 5/5] ARM: vexpress: enable bootz and hush parser for all VExpress boards   Andre Przywara
• [U-Boot] [PATCH 1/5] ARM: vexpress: move files in preparation for adding a new platform   Andre Przywara
• [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config   Andre Przywara
• [U-Boot] [PATCH 0/4 v2]: ARM: vexpress: add support for more core tiles   Andre Przywara
• [U-Boot] [PATCH 1/4] ARM: vexpress: refactoring of Versatile Express CA9x4 support   Andre Przywara
• [U-Boot] [PATCH 2/4] ARM: vexpress: create A5 specific board config   Andre Przywara
• [U-Boot] [PATCH 3/4] ARM: vexpress: add support for Versatile Express Cortex-A15-TC2   Andre Przywara
• [U-Boot] [PATCH 4/4] ARM: vexpress: enable bootz and hush parser for all VExpress boards   Andre Przywara
• [U-Boot] [PATCH v3 0/4] ARM: vexpress: add support for more core tiles   Andre Przywara
• [U-Boot] [PATCH v3 1/4] ARM: vexpress: refactoring of Versatile Express CA9x4 support   Andre Przywara
• [U-Boot] [PATCH v3 2/4] ARM: vexpress: create A5 specific board config   Andre Przywara
• [U-Boot] [PATCH v3 3/4] ARM: vexpress: add support for Versatile Express Cortex-A15-TC2   Andre Przywara
• [U-Boot] [PATCH v3 4/4] ARM: vexpress: enable bootz and hush parser for all VExpress boards   Andre Przywara
• [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] [RFC PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state   Andre Przywara
• [U-Boot] [RFC PATCH 2/6] ARM: add assembly routine to switch to non-secure state   Andre Przywara
• [U-Boot] [RFC PATCH 3/6] ARM: add U-Boot command "hypmode" to switch to non-secure state   Andre Przywara
• [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch   Andre Przywara
• [U-Boot] [RFC PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode   Andre Przywara
• [U-Boot] [RFC PATCH 6/6] ARM: VExpress: enable ARMv7 virt support for VExpress A15   Andre Przywara
• [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] [PATCH V4 0/5] ARM: OMAP4/5: Add support to boot with device tree as default   Sricharan R
• [U-Boot] [PATCH V4 1/5] ARM: OMAP5: Rename omap5_evm to omap5_uevm   Sricharan R
• [U-Boot] [PATCH V4 2/5] ARM: OMAP5: Set fdt_high to enable booting with Device tree   Sricharan R
• [U-Boot] [PATCH V4 3/5] omap5: Allow use of a plain text env file   Sricharan R
• [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree   Sricharan R
• [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command   Sricharan R
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Sricharan R
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Sricharan R
• [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree   Sricharan R
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Sricharan R
• [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree   Sricharan R
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Sricharan R
• [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree   Sricharan R
• [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command   Sricharan R
• [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command   Sricharan R
• [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command   Sricharan R
• [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree   Sricharan R
• [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command   Sricharan R
• [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work   Sricharan R
• [U-Boot] [PATCH v2] OMAP: Fix copy-paste bug that did not enable UART4 clock   Sricharan R
• [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks   Sricharan R
• [U-Boot] OMAP (4) boot_params   Sricharan R
• [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC   Sricharan R
• [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work   Sricharan R
• [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks   Sricharan R
• [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks   Sricharan R
• [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks   Sricharan R
• [U-Boot] [PATCH] omap5_common: Add optargs variable for kernel command line args   Sricharan R
• [U-Boot] [PATCH 0/5] ARM: OMAP: Cleanup save_boot_params function   Sricharan R
• [U-Boot] [PATCH 1/5] ARM: OMAP: Make omap_boot_parameters common across socs   Sricharan R
• [U-Boot] [PATCH 2/5] ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common   Sricharan R
• [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function   Sricharan R
• [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage   Sricharan R
• [U-Boot] [PATCH 5/5] ARM: OMAP: Add arch_cpu_init function   Sricharan R
• [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function   Sricharan R
• [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage   Sricharan R
• [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage   Sricharan R
• [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function   Sricharan R
• [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function   Sricharan R
• [U-Boot] [PATCH V2 1/5] ARM: OMAP: Make omap_boot_parameters common across socs   Sricharan R
• [U-Boot] [PATCH V2 2/5] ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common   Sricharan R
• [U-Boot] [PATCH V2 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function   Sricharan R
• [U-Boot] [PATCH V2 4/5] ARM: OMAP: Cleanup boot parameters usage   Sricharan R
• [U-Boot] [PATCH V2 5/5] ARM: OMAP: Add arch_cpu_init function   Sricharan R
• [U-Boot] [PATCH 0/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 1/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 2/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 3/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 4/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 5/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 6/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 7/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH 8/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH v2 0/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH v2 1/8] ARM: Add maintainer for the Seagate GoFlexHome   Suriyan Ramasami
• [U-Boot] [PATCH v2 2/8] ARM: Add a board entry for the Seagate GoFlexHome   Suriyan Ramasami
• [U-Boot] [PATCH v2 3/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH v2 4/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH v2 5/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH v2 6/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH v2 7/8] ARM: Add Seagate GoFlexHome support   Suriyan Ramasami
• [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot   Suriyan Ramasami
• [U-Boot] [PATCH v3 1/1] ARM: Add support for Seagate GoFlexHome   Suriyan Ramasami
• [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot   Suriyan Ramasami
• [U-Boot] [PATCH v4 1/1] ARM: Add Seagate GoFlex Home support   Suriyan Ramasami
• [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot   Suriyan Ramasami
• [U-Boot] [Patch v2 2/3] net: ks8851_mll: add ethernet support   Raffaele Recalcati
• [U-Boot] [PATCH V7 08/10] SMDK5250: Enable EMMC booting   Amarendra Reddy
• [U-Boot] [PATCH V7 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C   Amarendra Reddy
• [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition   Amarendra Reddy
• [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition   Amarendra Reddy
• [U-Boot] [PATCH V8 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues   Amarendra Reddy
• [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Amarendra Reddy
• [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Amarendra Reddy
• [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   Amarendra Reddy
• [U-Boot] [PATCH 1/4] Tegra: All Tamonten-derived boards use onboard NAND   Thierry Reding
• [U-Boot] [PATCH 2/4] Tegra: Medcom-Wide: Enable NAND and boot script support   Thierry Reding
• [U-Boot] [PATCH 3/4] Tegra: Plutux: Enable NAND and boot script support   Thierry Reding
• [U-Boot] [PATCH 4/4] Tegra: TEC: Enable boot script support   Thierry Reding
• [U-Boot] Banner -> git co target?   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree   Tom Rini
• [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout   Tom Rini
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Tom Rini
• [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree   Tom Rini
• [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3   Tom Rini
• [U-Boot] Potential issue with recent OMAP PRCM struct unification   Tom Rini
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Tom Rini
• [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints   Tom Rini
• [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Tom Rini
• [U-Boot] [Patch v8] Consolidate bool type   Tom Rini
• [U-Boot] [PATCH 2/2] OMAP4/5: I2C: New I2C driver files added   Tom Rini
• [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support   Tom Rini
• [U-Boot] [PATCH v2 2/6] asm/omap_gpmc.h: consolidate common defines   Tom Rini
• [U-Boot] [PATCH v2 3/6] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel   Tom Rini
• [U-Boot] [PATCH v2 4/6] omap_gpmc: change nandecc command   Tom Rini
• [U-Boot] [PATCH v2 5/6] omap_gpmc: add support for hw assisted BCH8   Tom Rini
• [U-Boot] mmc: don't allow extra cmdline arguments   Tom Rini
• [U-Boot] replace last __bss_end__ occurrences with __bss_end   Tom Rini
• [U-Boot] [U-Boot, V2] disk: fix unaligned access in efi partitions   Tom Rini
• [U-Boot] [U-Boot, V2] README: document the requirements for CONFIG_SYS_HZ   Tom Rini
• [U-Boot] build: Fix make errors generated when building 'distclean'   Tom Rini
• [U-Boot] env: fix potential stack overflow in environment functions   Tom Rini
• [U-Boot] MAKEALL: Fix case substitution for old bash   Tom Rini
• [U-Boot] [U-Boot, v2] dts/Makefile: Build the user specified dts   Tom Rini
• [U-Boot] biosemu: include <asm/io.h> header   Tom Rini
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Tom Rini
• [U-Boot] OMAP (4) boot_params   Tom Rini
• [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command   Tom Rini
• [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command   Tom Rini
• [U-Boot] [PATCH] am335x: Enable MMC1 clock   Tom Rini
• [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command   Tom Rini
• [U-Boot] [STATUS] v2013.04-rc2 released   Tom Rini
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS   Tom Rini
• [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0   Tom Rini
• [U-Boot] [PATCH] env_onenand.c: Add missing cast in saveenv()   Tom Rini
• [U-Boot] OMAP (4) boot_params   Tom Rini
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS   Tom Rini
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   Tom Rini
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Rini
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Rini
• [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support   Tom Rini
• [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC   Tom Rini
• [U-Boot] [PATCH 2/3] omap5_evm.h: Move uEVM-specific choices to omap5_evm.h   Tom Rini
• [U-Boot] [PATCH 3/3] omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Rini
• [U-Boot] env: fix potential stack overflow in environment functions   Tom Rini
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Rini
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Rini
• [U-Boot] [v3] command/cache: Add flush command   Tom Rini
• [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks   Tom Rini
• [U-Boot] [PATCH] mx28evk: add NAND commands   Tom Rini
• [U-Boot] [PATCH 4/4] ARM: vexpress: enable bootz and hush parser for all VExpress boards   Tom Rini
• [U-Boot] [STATUS] v2013.04-rc2 released   Tom Rini
• [U-Boot] powerpc/lib: fix unsafe register handling in wait_ticks   Tom Rini
• [U-Boot] [U-Boot,v2] common/cmd_test: Avoid macro expansion   Tom Rini
• [U-Boot] [U-Boot, Upstream] cmd_sf: include header file common.h before div64.h   Tom Rini
• [U-Boot] [PATCH 1/2] dfu:ext4:fix: Change ext4write command order of parameters   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 2/3] omap5_evm.h: Move uEVM-specific choices to omap5_evm.h   Tom Rini
• [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support   Tom Rini
• [U-Boot] Patman / buildman pull request   Tom Rini
• [U-Boot] [PATCH v2] OMAP: Fix copy-paste bug that did not enable UART4 clock   Tom Rini
• [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support   Tom Rini
• [U-Boot] musb: am335x: disable bulk split-combine feature   Tom Rini
• [U-Boot] musb: set MUSB speed based on CONFIG   Tom Rini
• [U-Boot] [U-Boot, 1/1, v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken   Tom Rini
• [U-Boot] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Tom Rini
• [U-Boot] pcm051: Enable DDR PHY dynamic power down bit   Tom Rini
• [U-Boot] am335x: Enable MMC1 clock   Tom Rini
• [U-Boot] [U-Boot, v2] OMAP: Fix copy-paste bug that did not enable UART4 clock   Tom Rini
• [U-Boot] arm: omap4: Fix SDRAM AUTO DETECTION   Tom Rini
• [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support   Tom Rini
• [U-Boot] [PATCH V4 0/5] ARM: OMAP4/5: Add support to boot with device tree as default   Tom Rini
• [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Tom Rini
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Rini
• [U-Boot] offer: program to deal with kirkwood "boot from UART"   Tom Rini
• [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Tom Rini
• [U-Boot] [Patch v2] cmd/gpt: Support gpt command for all devices   Tom Rini
• [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC   Tom Rini
• [U-Boot] [PATCH] am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END   Tom Rini
• [U-Boot] Patman / buildman pull request   Tom Rini
• [U-Boot] [U-Boot, v6, 4/9] nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters   Tom Rini
• [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL   Tom Rini
• [U-Boot] [PATCH] am335x: Update timings for the beaglebone again   Tom Rini
• [U-Boot] [PATCH] omap5_uevm: Correct to 2MiB aligned partitions on eMMC   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH 0/4] omap2420-h4: Fix u-boot support for board   Tom Rini
• [U-Boot] [PATCH] OMAP4: Fix bug in omap4460_volts struct   Tom Rini
• [U-Boot] [PATCH] am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END   Tom Rini
• [U-Boot] [PATCH] omap5_uevm: Correct to 2MiB aligned partitions on eMMC   Tom Rini
• [U-Boot] [PATCH] am335x: Update timings for the beaglebone again   Tom Rini
• [U-Boot] [PATCH 1/1] powerpc/lib: fix unsafe register handling in wait_ticks   Tom Rini
• [U-Boot] [U-Boot, v6, 4/9] nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters   Tom Rini
• [U-Boot] Build failure on am335x_evm   Tom Rini
• [U-Boot] [PATCH] omap5_common: Add optargs variable for kernel command line args   Tom Rini
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Tom Rini
• [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...   Tom Rini
• [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...   Tom Rini
• [U-Boot] [PATCH] omap5_common.h: Switch to ext4   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master - UPDATED   Tom Rini
• [U-Boot] [PATCH] Do not call board_early_init_f() twice   Tom Rini
• [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment   Tom Rini
• [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment   Tom Rini
• [U-Boot] [PATCH v3 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Tom Rini
• [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] fatwrite problem   Tom Rini
• [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Tom Rini
• [U-Boot] fatwrite problem   Tom Rini
• [U-Boot] How do I use AM335x eth1 rather than eth0 ?   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH] am335x: Really correct DDR timings on new BeagleBone part   Tom Rini
• [U-Boot] fatwrite problem   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [PATCH] Tegra: T30: Beaver board support.   Tom Rini
• [U-Boot] [PATCH] Tegra: T30: Beaver board support.   Tom Rini
• [U-Boot] [PATCH] omap5_common: Add optargs variable for kernel command line args   Tom Rini
• [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux   Tom Rini
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Tom Rini
• [U-Boot] [PATCH v3 3/3] Add TI816X evm board support   Tom Rini
• [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function   Tom Rini
• [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage   Tom Rini
• [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] Pending TPM patches for release   Tom Rini
• [U-Boot] [STATUS] v2013.04-rc3 released   Tom Rini
• [U-Boot] [PATCH V3 0/3] OMAP5: I2C: Enable support of I2C4 and I2C5 buses   Tom Rini
• [U-Boot] [PATCH v2 0/4] Enable CPSW on TI814x EVM   Tom Rini
• [U-Boot] [PATCH V3 00/10] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups   Tom Rini
• [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support   Tom Rini
• [U-Boot] [PATCH] Add NanoBone board support   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH] Add NanoBone board support   Tom Rini
• [U-Boot] [PATCH] Add NanoBone board support   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH] beagleboard: Update comment in get_board_rev()   Tom Rini
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Tom Rini
• [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot   Tom Rini
• [U-Boot] printenv show garbage on out-of-memory conditions   Tom Rini
• [U-Boot] mmc: support the correct card version for eMMC   Tom Rini
• [U-Boot] mmc: check the revision for sd3.0   Tom Rini
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Tom Rini
• [U-Boot] [PATCH] crc32: Correct endianness of crc32 result   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH v2] patman: fix gitutil for decorations   Tom Rini
• [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target   Tom Rini
• [U-Boot] [PATCH v2] crc32: Correct endianness of crc32 result   Tom Rini
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Tom Rini
• [U-Boot] [STATUS] v2013.04 released   Tom Rini
• [U-Boot] [STATUS] v2013.04 released   Tom Rini
• [U-Boot] [PATCH 1/2] config_cmd_default.h: Remove CONFIG_CMD_MEMTEST   Tom Rini
• [U-Boot] [PATCH 2/2] feature-removal-schedule.txt: Add CONFIG_SYS_MTEST_START/END   Tom Rini
• [U-Boot] [PATCH] Add NanoBone board support   Tom Rini
• [U-Boot] [STATUS] v2013.04 released   Tom Rini
• [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'   Tom Rini
• [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board   Tom Rini
• [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board   Tom Rini
• [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements   Tom Rini
• [U-Boot] [PATCH 4/4] watchdog: Add support for Xilinx Microblaze watchdog   Tom Rini
• [U-Boot] [PATCH 02/14] zynq: Move scutimer baseaddr to hardware.h   Tom Rini
• [U-Boot] [PATCH 08/14] zynq: Move macros to hardware.h   Tom Rini
• [U-Boot] [PATCH 13/14] i2c: zynq: Add support for Xilinx Zynq   Tom Rini
• [U-Boot] [PATCH 14/14] fpga: Add support for loading bitstream for Xilinx Zynq   Tom Rini
• [U-Boot] Xilinx Zynq patches   Tom Rini
• [U-Boot] [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [PATCH 1/2] config_cmd_default.h: Remove CONFIG_CMD_MEMTEST   Tom Rini
• [U-Boot] [PATCH v3 0/19] Allow images to work on sandbox   Tom Rini
• [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Tom Rini
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Tom Rini
• [U-Boot] (WARNING!!! PGP with incorrect signature) Re: [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers   Tom Rini
• [U-Boot] (Mixed security state) Re: [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   Tom Rini
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Tom Rini
• [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support   Tom Rini
• [U-Boot] [PATCH v2 0/15] Xilinx Zynq patches   Tom Rini
• [U-Boot] [PATCH v2 4/4] watchdog: Add support for Xilinx Microblaze watchdog   Tom Rini
• [U-Boot] [PATCH v2 2/4] microblaze: Enable netconsole   Tom Rini
• [U-Boot] [RFC] Remove ^L string   Tom Rini
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Tom Rini
• [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support   Tom Rini
• [U-Boot] [PATCH 3/3] usb: common: Use a global definition for 'min3'   Tom Rini
• [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux   Tom Rini
• [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections   Tom Rini
• [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)   Tom Rini
• [U-Boot] [PATCH v2] Add NanoBone board support   Tom Rini
• [U-Boot] [PATCH] am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO   Tom Rini
• [U-Boot] [PULL] : Please pull u-boot-i2c   Tom Rini
• [U-Boot] [PATCH] am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO   Tom Rini
• [U-Boot] beagleboard: Update comment in get_board_rev()   Tom Rini
• [U-Boot] [U-Boot, V2] arm: omap: emif: Fix DDR3 init after warm reset   Tom Rini
• [U-Boot] [U-Boot, PATCHv2, 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS.   Tom Rini
• [U-Boot] [U-Boot, v3] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work   Tom Rini
• [U-Boot] omap5_common: Add optargs variable for kernel command line args   Tom Rini
• [U-Boot] Remove duplicate / unused #defines on AM335x boards   Tom Rini
• [U-Boot] ARM: OMAP5: Fix warm reset with USB cable connected   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM:Panda:Fix device tree loading for the panda-es   Tom Rini
• [U-Boot] [PATCH 1/2] da850: provide davinci_enable_uart0   Tom Rini
• [U-Boot] [U-Boot, 1/3] cm-t35: move cm-t35 to live in compulab directory   Tom Rini
• [U-Boot] [PATCH] git-mailrc: Add trini shortcut   Tom Rini
• [U-Boot] Pull request - zynq   Tom Rini
• [U-Boot] Pull request - microblaze   Tom Rini
• [U-Boot] [PULL] : Please pull u-boot-i2c   Tom Rini
• [U-Boot] [PATCH v4 0/7] Add cros-ec protocol driver and enable it in smdk5250   Tom Rini
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Tom Rini
• [U-Boot] [PATCH v2] fs/ext4: Support device block sizes != 512 bytes.   Tom Rini
• [U-Boot] [PATCH 1/2] mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND   Tom Rini
• [U-Boot] [PATCH 2/2] omap5_uevm: Enable redudnant MMC environment   Tom Rini
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Tom Rini
• [U-Boot] [PATCH v4 03/15] sandbox: Switch over to generic board   Tom Rini
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined   Tom Rini
• [U-Boot] [PATCH v2 10/11] amcc-common.h: minor white space cleanup   Stefan Roese
• [U-Boot] [PATCH v2 11/11] amcc-common.h: enable support for "env grep", "setexpr", and regex.   Stefan Roese
• [U-Boot] Support required for loading U-boot on SDRAM   Stefan Roese
• [U-Boot] [PATCH 1/3] ppc4xx: Add SPL support   Stefan Roese
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add SPL support   Stefan Roese
• [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints   Stefan Roese
• [U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031   Stefan Roese
• [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support   Stefan Roese
• [U-Boot] [PATCH] mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices   Stefan Roese
• [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Use uintptr_t for casts from u32 to void *   Stefan Roese
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Stefan Roese
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Use uintptr_t for casts from u32 to void *   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH] flash: Add optional verify-after-write feature   Stefan Roese
• [U-Boot] [PATCH] flash: Add optional verify-after-write feature   Stefan Roese
• [U-Boot] [PATCH v2] flash: Add optional verify-after-write feature   Stefan Roese
• [U-Boot] [PATCH] mpc5200: a3m071/a4m2k: Enable flash verify option   Stefan Roese
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Stefan Roese
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Stefan Roese
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Stefan Roese
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   Stefan Roese
• [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support   Stefan Roese
• [U-Boot] [PATCH 1/4] imx: Move some header files from arch-mxs to imx-common   Stefan Roese
• [U-Boot] [PATCH 2/4] imx: Move some i.MX common functions into the imx-common directory   Stefan Roese
• [U-Boot] [PATCH 3/4] dma: Add i.MX6 support to drivers/dma/apbh_dma.c   Stefan Roese
• [U-Boot] [PATCH 4/4] mtd: mxs_nand: Add support for i.MX6   Stefan Roese
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH v2] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH] arm: imx: Change iomux functions to void type   Stefan Roese
• [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support   Stefan Roese
• [U-Boot] [PATCH] arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h   Stefan Roese
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH 4/4 v2] mtd: mxs_nand: Add support for i.MX6   Stefan Roese
• [U-Boot] [PATCH v3] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH] make hang() a weak function   Stefan Roese
• [U-Boot] [PATCH v3] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH v4] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH 4 (resend)] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH 4 (resend)] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH v5] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] uboot newbie question on booting ep405 board   Stefan Roese
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Stefan Roese
• [U-Boot] [PATCH 1/3 v2] ppc4xx: Add SPL support   Stefan Roese
• [U-Boot] [PATCH 2/3] Makefile: Add target for combined u-boot.img & spl/u-boot.bin   Stefan Roese
• [U-Boot] [PATCH 3/3 v3] ppc4xx: Add lcd4_lwmon5 support   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v2] flash: Add optional verify-after-write feature   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards   Stefan Roese
• [U-Boot] [PATCH 1/2] mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct   Stefan Roese
• [U-Boot] [PATCH 2/2] mpc5200: a3m071/a4m2k: Add redundant environment support   Stefan Roese
• [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Stefan Roese
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefan Roese
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefan Roese
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Stefan Roese
• [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage   Stefan Roese
• [U-Boot] [PATCH 1/2 v2] mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct   Stefan Roese
• [U-Boot] [PATCH 2/2 v2] mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes   Stefan Roese
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   Pali Rohár
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   Pali Rohár
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   Pali Rohár
• [U-Boot] [PATCH 0/5] FSL SECURE BOOT: Add support for next level image validation   Gupta Ruchika-R66431
• [U-Boot] [PATCH 3/3] x86: config: Init PCI before SPI   Graeme Russ
• [U-Boot] [PATCH] make hang() a weak function   Graeme Russ
• [U-Boot] [PATCH] make hang() a weak function   Graeme Russ
• [U-Boot] [PATCH] make hang() a weak function   Graeme Russ
• [U-Boot] [PATCH 09/19] x86: Remove ISR timer   Graeme Russ
• [U-Boot] [PATCH 02/19] x86: Remove unused portion of link script   Graeme Russ
• [U-Boot] [PATCH 01/19] x86: Remove unused bios/pci code   Graeme Russ
• [U-Boot] [PATCH 08/19] x86: Remove old broken timer implementation   Graeme Russ
• [U-Boot] [PATCH 10/19] x86: Re-enable PCAT timer 2 for beeping   Graeme Russ
• [U-Boot] [PATCH 07/19] x86: Add TSC timer   Graeme Russ
• [U-Boot] [PATCH 03/19] x86: Remove legacy board init code   Graeme Russ
• [U-Boot] [PATCH 06/19] x86: Rationalise kernel booting logic and bootstage   Graeme Russ
• [U-Boot] [PATCH v4 0/3] i.MX6 SabreSD and SabreAUTO bmode support   Otavio Salvador
• [U-Boot] [PATCH 1/3] wandboard: Remove duplicate 'mmc dev'   Otavio Salvador
• [U-Boot] [PATCH 2/3] mx6qsabrelite: Remove duplicate 'mmc dev'   Otavio Salvador
• [U-Boot] [PATCH 3/3] wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM   Otavio Salvador
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Otavio Salvador
• [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config   Otavio Salvador
• [U-Boot] [PATCH] mx28evk: add trimffs to nand command   Otavio Salvador
• [U-Boot] [PATCH 1/3] iomux-v3: Place pad control definitions into common file   Otavio Salvador
• [U-Boot] [PATCH v2 1/3] iomux-v3: Place pad control definitions into common file   Otavio Salvador
• [U-Boot] [PATCH] mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments   Otavio Salvador
• [U-Boot] [PATCH 1/3] wandboard: Add card detection for SOM MicroSD card   Otavio Salvador
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH 3/3] wandboard: Add boot selection support   Otavio Salvador
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH v2 1/3] wandboard: Add card detection for SOM MicroSD card   Otavio Salvador
• [U-Boot] [PATCH v2 2/3] wandboard: Add support for carrier board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH v2 3/3] wandboard: Add boot selection support   Otavio Salvador
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Otavio Salvador
• [U-Boot] [PATCH] mx51evk: Update environmet in order to allow booting a dt kernel   Otavio Salvador
• [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo   Otavio Salvador
• [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH v3 1/7] mx6qsabre{sd, auto}: Add update_sd_firmware support   Otavio Salvador
• [U-Boot] [PATCH v3 2/7] mx6qsabresd: Return status when initializing MMC   Otavio Salvador
• [U-Boot] [PATCH v3 3/7] wandboard: Use env storage info for mmcdev/mmcpart   Otavio Salvador
• [U-Boot] [PATCH v3 4/7] wandboard: Add update_sd_firmware support   Otavio Salvador
• [U-Boot] [PATCH v3 5/7] wandboard: Add card detection for SOM MicroSD card   Otavio Salvador
• [U-Boot] [PATCH v3 6/7] wandboard: Add support for Carrier Board MicroSD card   Otavio Salvador
• [U-Boot] [PATCH v3 7/7] wandboard: Add boot selection support   Otavio Salvador
• [U-Boot] [PATCH v2] mx51evk: Update environment in order to allow booting a dt kernel   Otavio Salvador
• [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel   Otavio Salvador
• [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel   Otavio Salvador
• [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel   Otavio Salvador
• [U-Boot] [PATCH v4 2/2] mx51evk: Do not force the rootfs type   Otavio Salvador
• [U-Boot] [PATCH v4 1/2] mx51evk: Update environment in order to allow booting a dt kernel   Otavio Salvador
• [U-Boot] [PATCH v4 2/2] mx51evk: Do not force the rootfs type   Otavio Salvador
• [U-Boot] [PATCH v5 1/2] mx51evk: Update environment in order to allow booting a dt kernel   Otavio Salvador
• [U-Boot] [PATCH v5 2/2] mx51evk: Do not force the rootfs type   Otavio Salvador
• [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux   Otavio Salvador
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Otavio Salvador
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Otavio Salvador
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Otavio Salvador
• [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset   Otavio Salvador
• [U-Boot] [PATCH 2/2] mx53ard: Rework default environment to support FDT, MMC and netboot   Otavio Salvador
• [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset   Otavio Salvador
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Otavio Salvador
• [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting   Otavio Salvador
• [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting   Otavio Salvador
• [U-Boot] [PATCH] mx23: Fix the size of internal RAM   Otavio Salvador
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Otavio Salvador
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Otavio Salvador
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Otavio Salvador
• [U-Boot] [PATCH] build: Pull -DBUILD_TAG into separate ifdef   Otavio Salvador
• [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path   Otavio Salvador
• [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path   Otavio Salvador
• [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path   Otavio Salvador
• [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path   Otavio Salvador
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Otavio Salvador
• [U-Boot] [PATCH 00/11 v3] Fix and Re-organise PWM Timer   Akshay Saraswat
• [U-Boot] [PATCH 07/11 v3] Exynos: Add peripherial id for pwm   Akshay Saraswat
• [U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo   Akshay Saraswat
• [U-Boot] [PATCH 0/4] Exynos5: Add cpu freq and tmu throttling   Akshay Saraswat
• [U-Boot] [PATCH 1/4] pmic: max77686: add pmic_set_voltage api for max77686   Akshay Saraswat
• [U-Boot] [PATCH 2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5   Akshay Saraswat
• [U-Boot] [PATCH 3/4] smdk5250: enable support for tmu throttling   Akshay Saraswat
• [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq   Akshay Saraswat
• [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq   Akshay Saraswat
• [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy   Akshay Saraswat
• [U-Boot] My First Android App   Satendra...
• [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Heiko Schocher
• [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Heiko Schocher
• [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Heiko Schocher
• [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)   Heiko Schocher
• [U-Boot] [PATCH v2 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics   Heiko Schocher
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Heiko Schocher
• [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards   Heiko Schocher
• [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH v3 04/11] i2c: add Faraday FTI2C010 I2C controller support   Heiko Schocher
• [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq   Heiko Schocher
• [U-Boot] [PATCH 01/16] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PULL] : Please pull u-boot-i2c   Heiko Schocher
• [U-Boot] [PULL] : Please pull u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support   Heiko Schocher
• [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition   Matt Sealey
• [U-Boot] U-Boot under coreboot   Vladimir 'φ-coder/phcoder' Serbinenko
• [U-Boot] [PATCH] Fix wrong >4G filtering   Vladimir 'φ-coder/phcoder' Serbinenko
• [U-Boot] [PATCH] VGA text console support   Vladimir 'φ-coder/phcoder' Serbinenko
• [U-Boot] [PATCH] i386 compiler args are wrong   Vladimir 'φ-coder/phcoder' Serbinenko
• [U-Boot] Improper assumption of serial port   Vladimir 'φ-coder/phcoder' Serbinenko
• [U-Boot] [PATCH 0/2] Add initial support for AQUILA-CYGNUS   Enric Balletbo i Serra
• [U-Boot] [PATCH 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS.   Enric Balletbo i Serra
• [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS   Enric Balletbo i Serra
• [U-Boot] [PATCHv2 0/2] Add initial support for AQUILA-CYGNUS   Enric Balletbo i Serra
• [U-Boot] [PATCHv2 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS.   Enric Balletbo i Serra
• [U-Boot] [PATCHv2 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS   Enric Balletbo i Serra
• [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS   Enric Balletbo Serra
• [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS   Enric Balletbo Serra
• [U-Boot] [PATCH] net: nfs: add dynamic wait period   Enric Balletbo Serra
• [U-Boot] [PATCH] net: nfs: add dynamic wait period   Enric Balletbo Serra
• [U-Boot] USB3.0 Interrupt transfer in u-boot   Puneet Sharma
• [U-Boot] USB3.0 Interrupt transfer in u-boot   Puneet Sharma
• [U-Boot] CAN support in u-boot   Puneet Sharma
• [U-Boot] [PATCH] USB: ohci-at91: make OHCI work on at91sam9g10 SoC   Bo Shen
• [U-Boot] phy ic isn't reset   Bo Shen
• [U-Boot] phy ic isn't reset   Bo Shen
• [U-Boot] phy ic isn't reset   Bo Shen
• [U-Boot] How do I use AM335x eth1 rather than eth0 ?   Bo Shen
• [U-Boot] How do I use AM335x eth1 rather than eth0 ?   Bo Shen
• [U-Boot] [PATCH 0/2] Enable network support on at91sam9n12ek board   Bo Shen
• [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support   Bo Shen
• [U-Boot] [PATCH 2/2] ARM: at91sam9n12: add network support with ksz8851_16mll   Bo Shen
• [U-Boot] [RFC] Remove ^L string   Bo Shen
• [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support   Bo Shen
• [U-Boot] [RFC] Remove ^L string   Bo Shen
• [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support   Bo Shen
• [U-Boot] [Patch v2 0/3] Enable network support on at91sam9n12ek board   Bo Shen
• [U-Boot] [Patch v2 1/3] checkpatch: add ignore for network block comment style checking   Bo Shen
• [U-Boot] [Patch v2 2/3] net: ks8851_mll: add ethernet support   Bo Shen
• [U-Boot] [Patch v2 3/3] ARM: at91sam9n12: add network support with ksz8851_16mll   Bo Shen
• [U-Boot] [PATCH 0/3] net: macb: add support for gigabit MAC   Bo Shen
• [U-Boot] [PATCH 1/3] net: macb: using AT91FAMILY replace #ifdeferry   Bo Shen
• [U-Boot] [PATCH 2/3] net: macb: using phylib to configure phy device   Bo Shen
• [U-Boot] [PATCH 3/3] net: macb: add support for gigabit MAC   Bo Shen
• [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux   Bo Shen
• [U-Boot] [PATCH 1/2] mmc: atmel_mci: using IP version for different setting   Bo Shen
• [U-Boot] [PATCH 2/2] mmc: atmel_mci: add mmc card support   Bo Shen
• [U-Boot] [PATCH 0/4 V4] SMDK5250: FDT: Add device tree support for console   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4 V4] EXYNOS5: FDT: Add compatible strings for Serial   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4 V4] EXYNOS5: FDT: Add serial device node values   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4 V4] S5P: Serial: Add fdt support to driver   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console   Rajeshwari Shinde
• [U-Boot] [PATCH 0/3 V5] EXYNOS5: Add GPIO numbering feature   Rajeshwari Shinde
• [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature   Rajeshwari Shinde
• [U-Boot] [PATCH 2/3 V5] S5P: Rename GPIO definitions   Rajeshwari Shinde
• [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5   Rajeshwari Shinde
• [U-Boot] [PATCH] EXYNOS: Move includes from setup.h to tzpc_init.c   Rajeshwari Shinde
• [U-Boot] [PATCH] EXYNOS: Add API for power reset and shutdown   Rajeshwari Shinde
• [U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common.   Rajeshwari Shinde
• [U-Boot] [PATCH 1/4] EXYNOS: Add API for power reset and exit wakeup   Rajeshwari Shinde
• [U-Boot] [PATCH 2/4] EXYNOS: LDS file move to common   Rajeshwari Shinde
• [U-Boot] [PATCH 3/4] EXYNOS4210: Configure GPIO for uart   Rajeshwari Shinde
• [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.   Rajeshwari Shinde
• [U-Boot] u-boot UBI support   Sascha Silbe
• [U-Boot] CONFIG option for second ethernet phy   Michal Simek
• [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c   Michal Simek
• [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c   Michal Simek
• [U-Boot] [PATCH 1/4] microblaze: Fix reset function   Michal Simek
• [U-Boot] [PATCH 2/4] microblaze: Enable netconsole   Michal Simek
• [U-Boot] [PATCH 3/4] microblaze: Disable all cpu features before reset   Michal Simek
• [U-Boot] [PATCH 4/4] watchdog: Add support for Xilinx Microblaze watchdog   Michal Simek
• [U-Boot] Xilinx Zynq patches   Michal Simek
• [U-Boot] [PATCH 01/14] arm: zynq: U-Boot udelay < 1000 FIX   Michal Simek
• [U-Boot] [PATCH 02/14] zynq: Move scutimer baseaddr to hardware.h   Michal Simek
• [U-Boot] [PATCH 03/14] net: phy: Define Marvell 88e1518 phy   Michal Simek
• [U-Boot] [PATCH 04/14] net: gem: Remove WRAP bit from TX buffer description   Michal Simek
• [U-Boot] [PATCH 05/14] net: gem: Simplify return path in zynq_gem_recv   Michal Simek
• [U-Boot] [PATCH 06/14] net: gem: Do not initialize BDs again   Michal Simek
• [U-Boot] [PATCH 07/14] net: gem: Fix gem driver on 1Gbps LAN   Michal Simek
• [U-Boot] [PATCH 08/14] zynq: Move macros to hardware.h   Michal Simek
• [U-Boot] [PATCH 09/14] net: gem: Pass phy address to init   Michal Simek
• [U-Boot] [PATCH 10/14] net: gem: Preserve clk on emio interface   Michal Simek
• [U-Boot] [PATCH 11/14] net: gem: Add support for phy autodetection   Michal Simek
• [U-Boot] [PATCH 12/14] mmc: Add support for Xilinx Zynq sdhci controller   Michal Simek
• [U-Boot] [PATCH 13/14] i2c: zynq: Add support for Xilinx Zynq   Michal Simek
• [U-Boot] [PATCH 14/14] fpga: Add support for loading bitstream for Xilinx Zynq   Michal Simek
• [U-Boot] [PATCH v2 0/15] Xilinx Zynq patches   Michal Simek
• [U-Boot] [PATCH v2 01/15] arm: zynq: U-Boot udelay < 1000 FIX   Michal Simek
• [U-Boot] [PATCH v2 02/15] arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses   Michal Simek
• [U-Boot] [PATCH v2 03/15] zynq: Move scutimer baseaddr to hardware.h   Michal Simek
• [U-Boot] [PATCH v2 04/15] net: phy: Define Marvell 88e1518 phy   Michal Simek
• [U-Boot] [PATCH v2 05/15] net: gem: Remove WRAP bit from TX buffer description   Michal Simek
• [U-Boot] [PATCH v2 06/15] net: gem: Simplify return path in zynq_gem_recv   Michal Simek
• [U-Boot] [PATCH v2 07/15] net: gem: Do not initialize BDs again   Michal Simek
• [U-Boot] [PATCH v2 08/15] net: gem: Fix gem driver on 1Gbps LAN   Michal Simek
• [U-Boot] [PATCH v2 09/15] zynq: Move macros to hardware.h   Michal Simek
• [U-Boot] [PATCH v2 10/15] net: gem: Pass phy address to init   Michal Simek
• [U-Boot] [PATCH v2 11/15] net: gem: Preserve clk on emio interface   Michal Simek
• [U-Boot] [PATCH v2 12/15] net: gem: Add support for phy autodetection   Michal Simek
• [U-Boot] [PATCH v2 13/15] mmc: Add support for Xilinx Zynq sdhci controller   Michal Simek
• [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq   Michal Simek
• [U-Boot] [PATCH v2 15/15] fpga: Add support for loading bitstream for Xilinx Zynq   Michal Simek
• [U-Boot] Xilinx Zynq patches   Michal Simek
• [U-Boot] [PATCH v2 0/4] Xilinx Microblaze patches   Michal Simek
• [U-Boot] [PATCH v2 1/4] microblaze: Fix reset function   Michal Simek
• [U-Boot] [PATCH v2 2/4] microblaze: Enable netconsole   Michal Simek
• [U-Boot] [PATCH v2 3/4] microblaze: Disable all cpu features before reset   Michal Simek
• [U-Boot] [PATCH v2 4/4] watchdog: Add support for Xilinx Microblaze watchdog   Michal Simek
• [U-Boot] [PATCH] git-mailrc: Add trini shortcut   Michal Simek
• [U-Boot] patman and buildman experience   Michal Simek
• [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze   Michal Simek
• [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO   Michal Simek
• [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze   Michal Simek
• [U-Boot] [PATCH 1/2] fpga: Clean coding style   Michal Simek
• [U-Boot] [PATCH 2/2] fpga: Fix debug message compilation error   Michal Simek
• [U-Boot] [PATCH 1/2] fpga: Clean coding style   Michal Simek
• [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq   Michal Simek
• [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze   Michal Simek
• [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO   Michal Simek
• [U-Boot] Pull request - microblaze   Michal Simek
• [U-Boot] Pull request - zynq   Michal Simek
• [U-Boot] [PATCH v2 1/3] exynos: move tzpc_init to armv7/exynos   Inderpal Singh
• [U-Boot] [PATCH v3 0/3] Make tzpc initialization common for exynos4 and exynos5   Inderpal Singh
• [U-Boot] [PATCH v3 1/3] exynos: move tzpc_init to armv7/exynos   Inderpal Singh
• [U-Boot] [PATCH v3 2/3] exynos: update tzpc to make it common for exynos4 and exynos5   Inderpal Singh
• [U-Boot] [PATCH v3 3/3] exynos: Update origen and smdkv310 to use common tzpc_init   Inderpal Singh
• [U-Boot] [PATCH V2 1/5] ARM: OMAP5: Rename omap5_evm to omap5_uevm   Smithlife
• [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file   Smithlife
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Smithlife
• [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference   Smithlife
• [U-Boot] [PATCH 05/11] usb-gadget: add FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH 04/11] usb-ehci: add Faraday USB 2.0 EHCI controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 00/12] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v2 01/12] mtd: spi: winbond: add W25PXX support   Kuo-Jung Su
• [U-Boot] [PATCH v2 02/12] net: ftgmac100: add MMU/D-cache support   Kuo-Jung Su
• [U-Boot] [PATCH v2 03/12] net: add Faraday FTMAC110 10/100Mbps ethernet support   Kuo-Jung Su
• [U-Boot] [PATCH v2 04/12] i2c: add Faraday FTI2C010 I2C controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 06/12] mmc: add an alternative driver to Faraday FTSDC010   Kuo-Jung Su
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 08/12] mtd: spi: add FTSPI020 SPI Flash controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 09/12] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v2 10/12] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores   Kuo-Jung Su
• [U-Boot] [PATCH v2 12/12] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores   Kuo-Jung Su
• [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores   Kuo-Jung Su
• [U-Boot] [PATCH v2 00/12] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v2 12/12] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v2 10/12] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v2 09/12] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v2 08/12] mtd: spi: add FTSPI020 SPI Flash controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 06/12] mmc: add an alternative driver to Faraday FTSDC010   Kuo-Jung Su
• [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 04/12] i2c: add Faraday FTI2C010 I2C controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 03/12] net: add Faraday FTMAC110 10/100Mbps ethernet support   Kuo-Jung Su
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH] cmd_boot: cleanup for 'go' command   Kuo-Jung Su
• [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support   Kuo-Jung Su
• [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH v3 01/11] arm: add MMU/D-Cache support for Faraday cores   Kuo-Jung Su
• [U-Boot] [PATCH v3 02/11] net: ftgmac100: add MMU/D-cache support   Kuo-Jung Su
• [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support   Kuo-Jung Su
• [U-Boot] [PATCH v3 04/11] i2c: add Faraday FTI2C010 I2C controller support   Kuo-Jung Su
• [U-Boot] [PATCH v3 05/11] spi: add Faraday FTSPI010 SPI controller support   Kuo-Jung Su
• [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue   Kuo-Jung Su
• [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v3 09/11] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v3 10/11] video: add Faraday FTLCDC200 LCD controller support   Kuo-Jung Su
• [U-Boot] [PATCH v3 11/11] arm: add Faraday A36x SoC platform support   Kuo-Jung Su
• [U-Boot] [PATCH] cmd_boot: cleanup for 'go' command   Kuo-Jung Su
• [U-Boot] [PATCH v2] cmd_boot: cleanup for 'go' command   Kuo-Jung Su
• [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v3 09/11] usb: gadget: add Faraday FOTG210 USB gadget support   Kuo-Jung Su
• [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support   Kuo-Jung Su
• [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support   Kuo-Jung Su
• [U-Boot] [RFC] MAKEALL: Fix case substitution for old bash   York Sun
• [U-Boot] [Patch v8] Consolidate bool type   York Sun
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   York Sun
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   York Sun
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   York Sun
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   York Sun
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   York Sun
• [U-Boot] [PATCH] common/cmd_test: Avoid macro expansion   York Sun
• [U-Boot] [Patch v2] common/cmd_test: Avoid macro expansion   York Sun
• [U-Boot] [Patch alt] common/cmd_test: Avoid macro expansion   York Sun
• [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Clear L1 D-cache lock   York Sun
• [U-Boot] [v3] command/cache: Add flush command   York Sun
• [U-Boot] [v3] command/cache: Add flush command   York Sun
• [U-Boot] [v3] command/cache: Add flush command   York Sun
• [U-Boot] [v2] powerpc/mpc85xx: Clear L1 D-cache lock   York Sun
• [U-Boot] [PATCH] powerpc/BSC9132: Add IFC bank count   York Sun
• [U-Boot] u-boot was skipped: because UBOOT_MACHINE is not set   Zafrullah Syed
• [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support   Timur Tabi
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Jagan Teki
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Jagan Teki
• [U-Boot] Question about Automatic Updates   Jagan Teki
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Jagan Teki
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Jagan Teki
• [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd   Jagan Teki
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Jagan Teki
• [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT   Jagan Teki
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Jagan Teki
• [U-Boot] [PATCH v2 10/15] sf: Enable FDT-based configuration and memory mapping   Jagan Teki
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Jagan Teki
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Jagan Teki
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Jagan Teki
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Jagan Teki
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Jagan Teki
• [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size   Jagan Teki
• [U-Boot] [U-boot] mmc write|read howto   Jagan Teki
• [U-Boot] [U-boot] mmc write|read howto   Jagan Teki
• [U-Boot] [U-boot] Help: how to use AES crypto   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] exynos: Adjust the starting MIF voltage to 1.05v   Bernie Thompson
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v10 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Benoît Thébaudeau
• [U-Boot] [PATCH v10 02/30] mtd: nand: mxc_nand: Fix is_16bit_nand()   Benoît Thébaudeau
• [U-Boot] [PATCH v10 03/30] nand: mxc: Prepare to add support for i.MX5   Benoît Thébaudeau
• [U-Boot] [PATCH v10 04/30] nand: mxc: Add support for i.MX5   Benoît Thébaudeau
• [U-Boot] [PATCH v10 05/30] imx: mx5: lowlevel_init: Simplify code   Benoît Thébaudeau
• [U-Boot] [PATCH v10 06/30] imx: mx53ard: Add support for NAND Flash   Benoît Thébaudeau
• [U-Boot] [PATCH v10 07/30] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()   Benoît Thébaudeau
• [U-Boot] [PATCH v10 08/30] nand: mxc: Use appropriate page number in syndrome functions   Benoît Thébaudeau
• [U-Boot] [PATCH v10 09/30] arm: start.S: Fix _TEXT_BASE for SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v10 10/30] arm: relocate_code() is no longer noreturn   Benoît Thébaudeau
• [U-Boot] [PATCH v10 11/30] arm1136: Remove redundant relocate_code() return   Benoît Thébaudeau
• [U-Boot] [PATCH v10 12/30] arm: relocate_code(): Remove useless relocation offset computation   Benoît Thébaudeau
• [U-Boot] [PATCH v10 13/30] arm: relocate_code(): Use __image_copy_end for end of relocation   Benoît Thébaudeau
• [U-Boot] [PATCH v10 14/30] arm: crt0.S: Remove bogus .globl   Benoît Thébaudeau
• [U-Boot] [PATCH v10 15/30] autoconfig.mk: Make it possible to define configs from other configs   Benoît Thébaudeau
• [U-Boot] [PATCH v10 16/30] Makefile: Change CONFIG_SPL_PAD_TO to image offset   Benoît Thébaudeau
• [U-Boot] [PATCH v10 17/30] imx: Fix automatic make targets for imx images   Benoît Thébaudeau
• [U-Boot] [PATCH v10 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v10 19/30] arm926ejs: Remove deprecated and now unused NAND SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v10 20/30] arm: Remove unused relocate_code() parameters   Benoît Thébaudeau
• [U-Boot] [PATCH v10 21/30] Makefile: Move SHELL setup to config.mk   Benoît Thébaudeau
• [U-Boot] [PATCH v10 22/30] .gitignore: Add /SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v10 23/30] imx: Add u-boot-with-spl.imx make target   Benoît Thébaudeau
• [U-Boot] [PATCH v10 24/30] imx: Add u-boot-with-nand-spl.imx make target   Benoît Thébaudeau
• [U-Boot] [PATCH v10 25/30] arm: Remove support for smdk6400   Benoît Thébaudeau
• [U-Boot] [PATCH v10 26/30] Revert "mkconfig: start deprecating Makefile config targets"   Benoît Thébaudeau
• [U-Boot] [PATCH v10 27/30] arm: Remove support for unused s3c64xx   Benoît Thébaudeau
• [U-Boot] [PATCH v10 28/30] arm: Remove deprecated and now unused NAND SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v10 29/30] arm1176: Remove unused MMU setup from start.S   Benoît Thébaudeau
• [U-Boot] [PATCH v10 30/30] arm: Make all linker scripts compatible with per-symbol sections   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v3 3/7] Add fuse API and commands   Benoît Thébaudeau
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Benoît Thébaudeau
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Benoît Thébaudeau
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Benoît Thébaudeau
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Benoît Thébaudeau
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Benoît Thébaudeau
• [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Benoît Thébaudeau
• [U-Boot] [PATCH v11 02/30] mtd: nand: mxc_nand: Fix is_16bit_nand()   Benoît Thébaudeau
• [U-Boot] [PATCH v11 03/30] nand: mxc: Prepare to add support for i.MX5   Benoît Thébaudeau
• [U-Boot] [PATCH v11 04/30] nand: mxc: Add support for i.MX5   Benoît Thébaudeau
• [U-Boot] [PATCH v11 05/30] imx: mx5: lowlevel_init: Simplify code   Benoît Thébaudeau
• [U-Boot] [PATCH v11 06/30] imx: mx53ard: Add support for NAND Flash   Benoît Thébaudeau
• [U-Boot] [PATCH v11 07/30] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()   Benoît Thébaudeau
• [U-Boot] [PATCH v11 08/30] nand: mxc: Use appropriate page number in syndrome functions   Benoît Thébaudeau
• [U-Boot] [PATCH v11 09/30] arm: start.S: Fix _TEXT_BASE for SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 10/30] arm: relocate_code() is no longer noreturn   Benoît Thébaudeau
• [U-Boot] [PATCH v11 11/30] arm1136: Remove redundant relocate_code() return   Benoît Thébaudeau
• [U-Boot] [PATCH v11 12/30] arm: relocate_code(): Remove useless relocation offset computation   Benoît Thébaudeau
• [U-Boot] [PATCH v11 13/30] arm: relocate_code(): Use __image_copy_end for end of relocation   Benoît Thébaudeau
• [U-Boot] [PATCH v11 14/30] arm: crt0.S: Remove bogus .globl   Benoît Thébaudeau
• [U-Boot] [PATCH v11 15/30] autoconfig.mk: Make it possible to define configs from other configs   Benoît Thébaudeau
• [U-Boot] [PATCH v11 16/30] Makefile: Change CONFIG_SPL_PAD_TO to image offset   Benoît Thébaudeau
• [U-Boot] [PATCH v11 17/30] imx: Fix automatic make targets for imx images   Benoît Thébaudeau
• [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 19/30] arm926ejs: Remove deprecated and now unused NAND SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 20/30] arm: Remove unused relocate_code() parameters   Benoît Thébaudeau
• [U-Boot] [PATCH v11 21/30] Makefile: Move SHELL setup to config.mk   Benoît Thébaudeau
• [U-Boot] [PATCH v11 22/30] .gitignore: Add /SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 23/30] imx: Add u-boot-with-spl.imx make target   Benoît Thébaudeau
• [U-Boot] [PATCH v11 24/30] imx: Add u-boot-with-nand-spl.imx make target   Benoît Thébaudeau
• [U-Boot] [PATCH v11 25/30] arm: Remove support for smdk6400   Benoît Thébaudeau
• [U-Boot] [PATCH v11 26/30] Revert "mkconfig: start deprecating Makefile config targets"   Benoît Thébaudeau
• [U-Boot] [PATCH v11 27/30] arm: Remove support for unused s3c64xx   Benoît Thébaudeau
• [U-Boot] [PATCH v11 28/30] arm: Remove deprecated and now unused NAND SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 29/30] arm1176: Remove unused MMU setup from start.S   Benoît Thébaudeau
• [U-Boot] [PATCH v11 30/30] arm: Make all linker scripts compatible with per-symbol sections   Benoît Thébaudeau
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Benoît Thébaudeau
• [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Benoît Thébaudeau
• [U-Boot] Pull request: u-boot-arm/master   Benoît Thébaudeau
• [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...   Benoît Thébaudeau
• [U-Boot] [PATCH v12 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Benoît Thébaudeau
• [U-Boot] [PATCH v12 02/30] mtd: nand: mxc_nand: Fix is_16bit_nand()   Benoît Thébaudeau
• [U-Boot] [PATCH v12 03/30] nand: mxc: Prepare to add support for i.MX5   Benoît Thébaudeau
• [U-Boot] [PATCH v12 04/30] nand: mxc: Add support for i.MX5   Benoît Thébaudeau
• [U-Boot] [PATCH v12 05/30] imx: mx5: lowlevel_init: Simplify code   Benoît Thébaudeau
• [U-Boot] [PATCH v12 06/30] imx: mx53ard: Add support for NAND Flash   Benoît Thébaudeau
• [U-Boot] [PATCH v12 07/30] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()   Benoît Thébaudeau
• [U-Boot] [PATCH v12 08/30] nand: mxc: Use appropriate page number in syndrome functions   Benoît Thébaudeau
• [U-Boot] [PATCH v12 09/30] arm: start.S: Fix _TEXT_BASE for SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v12 10/30] arm: relocate_code() is no longer noreturn   Benoît Thébaudeau
• [U-Boot] [PATCH v12 11/30] arm1136: Remove redundant relocate_code() return   Benoît Thébaudeau
• [U-Boot] [PATCH v12 12/30] arm: relocate_code(): Remove useless relocation offset computation   Benoît Thébaudeau
• [U-Boot] [PATCH v12 13/30] arm: relocate_code(): Use __image_copy_end for end of relocation   Benoît Thébaudeau
• [U-Boot] [PATCH v12 14/30] arm: crt0.S: Remove bogus .globl   Benoît Thébaudeau
• [U-Boot] [PATCH v12 15/30] autoconfig.mk: Make it possible to define configs from other configs   Benoît Thébaudeau
• [U-Boot] [PATCH v12 16/30] Makefile: Change CONFIG_SPL_PAD_TO to image offset   Benoît Thébaudeau
• [U-Boot] [PATCH v12 17/30] imx: Fix automatic make targets for imx images   Benoît Thébaudeau
• [U-Boot] [PATCH v12 18/30] nand: mxc: Switch NAND SPL to generic SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v12 19/30] arm926ejs: Remove deprecated and now unused NAND SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v12 20/30] arm: Remove unused relocate_code() parameters   Benoît Thébaudeau
• [U-Boot] [PATCH v12 21/30] Makefile: Move SHELL setup to config.mk   Benoît Thébaudeau
• [U-Boot] [PATCH v12 22/30] .gitignore: Add /SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v12 23/30] imx: Add u-boot-with-spl.imx make target   Benoît Thébaudeau
• [U-Boot] [PATCH v12 24/30] imx: Add u-boot-with-nand-spl.imx make target   Benoît Thébaudeau
• [U-Boot] [PATCH v12 25/30] arm: Remove support for smdk6400   Benoît Thébaudeau
• [U-Boot] [PATCH v12 26/30] Revert "mkconfig: start deprecating Makefile config targets"   Benoît Thébaudeau
• [U-Boot] [PATCH v12 27/30] arm: Remove support for unused s3c64xx   Benoît Thébaudeau
• [U-Boot] [PATCH v12 28/30] arm: Remove deprecated and now unused NAND SPL   Benoît Thébaudeau
• [U-Boot] [PATCH v12 29/30] arm1176: Remove unused MMU setup from start.S   Benoît Thébaudeau
• [U-Boot] [PATCH v12 30/30] arm: Make all linker scripts compatible with per-symbol sections   Benoît Thébaudeau
• [U-Boot] [PATCH v12 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT   Benoît Thébaudeau
• [U-Boot] fatwrite problem   Benoît Thébaudeau
• [U-Boot] fatwrite problem   Benoît Thébaudeau
• [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE   Benoît Thébaudeau
• [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README   Benoît Thébaudeau
• [U-Boot] i.MX3 NAND: trying to understand OOB handling   Benoît Thébaudeau
• [U-Boot] i.MX3 NAND: trying to understand OOB handling   Benoît Thébaudeau
• [U-Boot] [PATCH v2 5/5] lib: consolidate hang()   Benoît Thébaudeau
• [U-Boot] [PATCH 1/6] imx: Align the imximage header and payload to multiples of 4k   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target   Benoît Thébaudeau
• [U-Boot] [PATCH v3 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT   Benoît Thébaudeau
• [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling   Benoît Thébaudeau
• [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5   Benoît Thébaudeau
• [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling   Benoît Thébaudeau
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling   Benoît Thébaudeau
• [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Benoît Thébaudeau
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions   Benoît Thébaudeau
• [U-Boot] [PATCH v4 02/10] imx: Add useful fuse definitions   Benoît Thébaudeau
• [U-Boot] [PATCH v4 03/10] Add fuse API and commands   Benoît Thébaudeau
• [U-Boot] [PATCH v4 04/10] Add fsl_iim driver   Benoît Thébaudeau
• [U-Boot] [PATCH v4 05/10] mpc: iim: Switch to common fsl_iim   Benoît Thébaudeau
• [U-Boot] [PATCH v4 06/10] mx51evk: Enable support for iim   Benoît Thébaudeau
• [U-Boot] [PATCH v4 07/10] Add mxc_ocotp driver   Benoît Thébaudeau
• [U-Boot] [PATCH v4 08/10] mx6qsabrelite: Enable support for ocotp   Benoît Thébaudeau
• [U-Boot] [PATCH v4 09/10] nitrogen6x: Enable support for ocotp   Benoît Thébaudeau
• [U-Boot] [PATCH v4 10/10] imx: Document fuse assignments for MAC addresses   Benoît Thébaudeau
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions   Benoît Thébaudeau
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Benoît Thébaudeau
• [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file   Benoît Thébaudeau
• [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage   Benoît Thébaudeau
• [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file   Benoît Thébaudeau
• [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage   Benoît Thébaudeau
• [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions   Benoît Thébaudeau
• [U-Boot] [PATCH 1/4] imx: iomux-v3: Fix common pad control definitions   Benoît Thébaudeau
• [U-Boot] [PATCH 2/4] imx: iomux-v3: cosmetic: Reorganize definitions   Benoît Thébaudeau
• [U-Boot] [PATCH 3/4] imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro   Benoît Thébaudeau
• [U-Boot] [PATCH 4/4] imx: iomux-v3: Include PKE and PUE to pad control pull definitions   Benoît Thébaudeau
• [U-Boot] [PATCH 1/6] imx: iomux-v3: Add iomux-mx25.h   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] imx: mx25pdk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 3/6] imx: mx25pdk: Fix GPIO assignments   Benoît Thébaudeau
• [U-Boot] [PATCH 4/6] imx: tx25: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 5/6] imx: zmx25: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 6/6] imx: mx25: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 1/6] imx: iomux-v3: Add iomux-mx35.h   Benoît Thébaudeau
• [U-Boot] [PATCH 2/6] imx: flea3: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 3/6] imx: mx35pdk: Fix WDOG_RST iomux function   Benoît Thébaudeau
• [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 5/6] imx: woodburn: Convert to iomux-v3   Benoît Thébaudeau
• [U-Boot] [PATCH 6/6] imx: mx35: Remove legacy iomux support   Benoît Thébaudeau
• [U-Boot] [PATCH v4 0/7] Add cros-ec protocol driver and enable it in smdk5250   Hung-ying Tyan
• [U-Boot] [PATCH v4 1/7] cros: add cros_ec driver   Hung-ying Tyan
• [U-Boot] [PATCH v4 2/7] cros: add I2C support for cros_ec   Hung-ying Tyan
• [U-Boot] [PATCH v4 3/7] cros: add SPI support for cros_ec   Hung-ying Tyan
• [U-Boot] [PATCH v4 4/7] cros: add LPC support for cros_ec   Hung-ying Tyan
• [U-Boot] [PATCH v4 5/7] cros: adds cros_ec keyboard driver   Hung-ying Tyan
• [U-Boot] [PATCH v4 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts   Hung-ying Tyan
• [U-Boot] [PATCH v4 7/7] cros: enable cros-ec for smdk5250   Hung-ying Tyan
• [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy   Hung-ying Tyan
• [U-Boot] Require guidance   Rajdeep Vaghasia
• [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout   Marek Vasut
• [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition   Marek Vasut
• [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout   Marek Vasut
• [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition   Marek Vasut
• [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports   Marek Vasut
• [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor   Marek Vasut
• [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports   Marek Vasut
• [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives   Marek Vasut
• [U-Boot] [PATCH 3/8] pxa_lcd: allow L_BIAS line to be unused   Marek Vasut
• [U-Boot] [PATCH 5/8] arm: bootm: call udc_disable() before booting linux   Marek Vasut
• [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel   Marek Vasut
• [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash   Marek Vasut
• [U-Boot] [PATCH 8/8] board support for palm treo 680   Marek Vasut
• [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash   Marek Vasut
• [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] arm: imx: Change iomux functions to void type   Marek Vasut
• [U-Boot] [PATCH v2 1/7] pxa_lcd: add the ACX544AKN lcd device   Marek Vasut
• [U-Boot] [PATCH v2 2/7] pxa_lcd: make lcd_enable() a weak pointer   Marek Vasut
• [U-Boot] [PATCH v2 3/7] pxa27x_udc: remove call to unimplemented set_GPIO_mode()   Marek Vasut
• [U-Boot] [PATCH v2 4/7] arm: bootm: call udc_disable()before booting linux   Marek Vasut
• [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel   Marek Vasut
• [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash   Marek Vasut
• [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board   Marek Vasut
• [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board   Marek Vasut
• [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash   Marek Vasut
• [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel   Marek Vasut
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Marek Vasut
• [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash   Marek Vasut
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Marek Vasut
• [U-Boot] [PATCH v3 8/8] usb: common: Use a global macro for 'min3'   Marek Vasut
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Marek Vasut
• [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives   Marek Vasut
• [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux   Marek Vasut
• [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board   Marek Vasut
• [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash   Marek Vasut
• [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support   Marek Vasut
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Marek Vasut
• [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux   Marek Vasut
• [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support   Marek Vasut
• [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support   Marek Vasut
• [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux   Marek Vasut
• [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board   Marek Vasut
• [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash   Marek Vasut
• [U-Boot] [PATCH] USB: ohci-at91: make OHCI work on at91sam9g10 SoC   Marek Vasut
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Marek Vasut
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Marek Vasut
• [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash   Marek Vasut
• [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash   Marek Vasut
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Marek Vasut
• [U-Boot] [PATCH 1/6] imx: Align the imximage header and payload to multiples of 4k   Marek Vasut
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Marek Vasut
• [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target   Marek Vasut
• [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5   Marek Vasut
• [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Marek Vasut
• [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target   Marek Vasut
• [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling   Marek Vasut
• [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target   Marek Vasut
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Marek Vasut
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Marek Vasut
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Marek Vasut
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Marek Vasut
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Marek Vasut
• [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5   Marek Vasut
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Marek Vasut
• [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Marek Vasut
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Marek Vasut
• [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux   Marek Vasut
• [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash   Marek Vasut
• [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V2 1/6] imx: Align the imximage header and payload to multiples of 4k   Marek Vasut
• [U-Boot] [PATCH V2 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Marek Vasut
• [U-Boot] [PATCH V2 3/6] arm: imx: Pack u-boot.bin into uImage for SPL   Marek Vasut
• [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5   Marek Vasut
• [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] Driver Model Thoughts   Marek Vasut
• [U-Boot] Driver Model Thoughts   Marek Vasut
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Marek Vasut
• [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports   Marek Vasut
• [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 3/3] mx53ard: Move register masks into imx-regs.h   Marek Vasut
• [U-Boot] [PATCH 2/3] mx5: Select CONFIG_REVISION_TAG   Marek Vasut
• [U-Boot] [PATCH 1/3] mx5: Define a common get_board_rev()   Marek Vasut
• [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux   Marek Vasut
• [U-Boot] [PATCH 0/3] usb: ss: Fixes for super speed framework   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage   Marek Vasut
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset   Marek Vasut
• [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage   Marek Vasut
• [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK   Marek Vasut
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Marek Vasut
• [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting   Marek Vasut
• [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting   Marek Vasut
• [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting   Marek Vasut
• [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support   Marek Vasut
• [U-Boot] [PATCH v3 09/11] usb: gadget: add Faraday FOTG210 USB gadget support   Marek Vasut
• [U-Boot] mx23evk resets when loading the kernel   Marek Vasut
• [U-Boot] mx23evk resets when loading the kernel   Marek Vasut
• [U-Boot] mx23evk resets when loading the kernel   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Fix the size of internal RAM   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] build: Pull -DBUILD_TAG into separate ifdef   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path   Marek Vasut
• [U-Boot] How to make DocBook   Marek Vasut
• [U-Boot] what is sandbox?   Marek Vasut
• [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses   Marek Vasut
• [U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function   Marek Vasut
• [U-Boot] [PATCH 2/4] arm: mxs: Add LCDIF registers for i.MX233   Marek Vasut
• [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver   Marek Vasut
• [U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK   Marek Vasut
• [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path   Marek Vasut
• [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value   Marek Vasut
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Marek Vasut
• [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path   Marek Vasut
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Marek Vasut
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Marek Vasut
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Marek Vasut
• [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks   Marek Vasut
• [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Marek Vasut
• [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports   Marek Vasut
• [U-Boot] [PATCH] arm: omap4: Fix SDRAM AUTO DETECTION   Lokesh Vutla
• [U-Boot] [PATCH] arm: omap4: Fix SDRAM AUTO DETECTION   Lokesh Vutla
• [U-Boot] [PATCH] ARM: OMAP5: Fix warm reset with USB cable connected   Lokesh Vutla
• [U-Boot] [PATCH 0/8] ARM: Add Seagate GoFlexHome support   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH   Prafulla Wadaskar
• [U-Boot] offer: program to deal with kirkwood "boot from UART"   Prafulla Wadaskar
• [U-Boot] [STATUS] v2013.04-rc2 released   Prafulla Wadaskar
• [U-Boot] [STATUS] v2013.04-rc2 released   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] zmodem ?   Brad Walker
• [U-Boot] bootm does not work if netconsole is enabled   Michael Walle
• [U-Boot] bootm does not work if netconsole is enabled   Michael Walle
• [U-Boot] bootm does not work if netconsole is enabled   Michael Walle
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Linus Walleij
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Linus Walleij
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Linus Walleij
• [U-Boot] [PATCH] integrator: enable device tree   Linus Walleij
• [U-Boot] [PATCH] biosemu: include <asm/io.h> header   Linus Walleij
• [U-Boot] [PATCH] integrator: enable device tree   Linus Walleij
• [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support   Alison Wang
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   Alison Wang
• [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support   Alison Wang
• [U-Boot] [PATCH 3/5] vybrid: add uart driver support   Alison Wang
• [U-Boot] [PATCH 4/5] vybrid: add eSDHC driver support   Alison Wang
• [U-Boot] [PATCH 5/5] vybrid: add ethernet driver support   Alison Wang
• [U-Boot] [PATCH] mmc: don't allow extra cmdline arguments   Stephen Warren
• [U-Boot] [PATCH] video: bcm2835: fix build issues   Stephen Warren
• [U-Boot] [PATCH] Tegra: Split tegra_get_chip_type() into _soc and _sku functions   Stephen Warren
• [U-Boot] [PATCH 1/4] Tegra: All Tamonten-derived boards use onboard NAND   Stephen Warren
• [U-Boot] [PATCH] Tegra114: Initialize System Counter (TSC) with osc frequency   Stephen Warren
• [U-Boot] [PATCH] Tegra: Fix MSELECT clock divisors for T30/T114.   Stephen Warren
• [U-Boot] [PATCH V2] ARM: bcm2835: fix get_timer() to return ms   Stephen Warren
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Stephen Warren
• [U-Boot] [PATCH v2] Tegra: Split tegra_get_chip_type() into soc & sku funcs   Stephen Warren
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Stephen Warren
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Stephen Warren
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Stephen Warren
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Stephen Warren
• [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics   Stephen Warren
• [U-Boot] [PATCH] Tegra: T30: Beaver board support.   Stephen Warren
• [U-Boot] [PATCH v2] Tegra: T30: Beaver board support.   Stephen Warren
• [U-Boot] [PATCH v3] Tegra: T30: Beaver board support.   Stephen Warren
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Stephen Warren
• [U-Boot] [PATCH] Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver, not cardhu   Stephen Warren
• [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference   Stephen Warren
• [U-Boot] [PATCH] Tegra: Split tegra_get_chip_type() into _soc and _sku functions   Tom Warren
• [U-Boot] [PATCH] Tegra114: Initialize System Counter (TSC) with osc frequency   Tom Warren
• [U-Boot] [PATCH] Tegra: Fix MSELECT clock divisors for T30/T114.   Tom Warren
• [U-Boot] [PATCH] Tegra114: Initialize System Counter (TSC) with osc frequency   Tom Warren
• [U-Boot] [PATCH v2] Tegra: Split tegra_get_chip_type() into soc & sku funcs   Tom Warren
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Warren
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Tom Warren
• [U-Boot] [ARM] Rollback *again* -- 5 patches   Tom Warren
• [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts   Tom Warren
• [U-Boot] [PATCH] Tegra: T30: Beaver board support.   Tom Warren
• [U-Boot] [PATCH v2] Tegra: T30: Beaver board support.   Tom Warren
• [U-Boot] [PATCH] Tegra: T30: Beaver board support.   Tom Warren
• [U-Boot] [PATCH v2] Tegra: T30: Beaver board support.   Tom Warren
• [U-Boot] [PATCH v3] Tegra: T30: Beaver board support.   Tom Warren
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] [PATCH v3] Tegra: T30: Beaver board support.   Tom Warren
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Tom Warren
• [U-Boot] [PATCH] Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver, not cardhu   Tom Warren
• [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference   Tom Warren
• [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference   Tom Warren
• [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114   Tom Warren
• [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8   Thomas Weber
• [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8   Thomas Weber
• [U-Boot] [PATCH v4 4/6] omap_gpmc: change nandecc command   Thomas Weber
• [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support   Julius Werner
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Julius Werner
• [U-Boot] [U-Boot, v3, 4/8] usb: Update device class in usb device's descriptor   Julius Werner
• [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports   Julius Werner
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Julius Werner
• [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports   Julius Werner
• [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface   Julius Werner
• [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports   Julius Werner
• [U-Boot] [PATCH 2/3] usb: fix: Fixing Port status and feature number constants   Julius Werner
• [U-Boot] [PATCH 2/2] samsung: trats2: add support for new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH v2 0/9] Introduce Samsung's new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH v2 1/9] pmic:max77686: add function to set voltage and mode   Piotr Wilczek
• [U-Boot] [PATCH v2 2/9] drivers:power:max77693: add support for new multi function pmic max77693   Piotr Wilczek
• [U-Boot] [PATCH v2 3/9] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH v2 4/9] i2c:multi_i2c: add new macros I2C_7 and I2C_10   Piotr Wilczek
• [U-Boot] [PATCH v2 5/9] power: fix pmic command   Piotr Wilczek
• [U-Boot] [PATCH v2 6/9] drivers:video:s6e8ax0: change data_to_send array to static   Piotr Wilczek
• [U-Boot] [PATCH v2 7/9] drivers:lcd: fix unaligned access on lcd   Piotr Wilczek
• [U-Boot] [PATCH v2 8/9] samsung: trats2: add support for new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH v2 9/9] Add a maintainer entry for the Trats2 board.   Piotr Wilczek
• [U-Boot] [PATCH v2 8/9] samsung: trats2: add support for new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH v2 9/9] Add a maintainer entry for the Trats2 board.   Piotr Wilczek
• [U-Boot] [PATCH 0/4] Enable 'ums' command on Trats2 board.   Piotr Wilczek
• [U-Boot] [PATCH 1/4] driver:usb:s3c_udc: add support for Exynos4x12   Piotr Wilczek
• [U-Boot] [PATCH 2/4] usb:composite: use memcpy to avoid unaligned access   Piotr Wilczek
• [U-Boot] [PATCH 3/4] pmic: max77693: add defines for safeout 1 and 2   Piotr Wilczek
• [U-Boot] [PATCH 4/4] trats2: enable ums support on Trats2   Piotr Wilczek
• [U-Boot] [Patch v2] cmd/gpt: Support gpt command for all devices   Piotr Wilczek
• [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support   Aaron Williams
• [U-Boot] [PATCH 1/3] arm:goni: Adjustment of configuration for goni target   Arkadiusz Wlodarczyk
• [U-Boot] [STATUS] v2013.04-rc2 released   Scott Wood
• [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Scott Wood
• [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND   Scott Wood
• [U-Boot] env: fix potential stack overflow in environment functions   Scott Wood
• [U-Boot] [v3] command/cache: Add flush command   Scott Wood
• [U-Boot] [v3] command/cache: Add flush command   Scott Wood
• [U-Boot] [v3] command/cache: Add flush command   Scott Wood
• [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Scott Wood
• [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND   Scott Wood
• [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash   Scott Wood
• [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND   Scott Wood
• [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Scott Wood
• [U-Boot] [v3] command/cache: Add flush command   Scott Wood
• [U-Boot] [v3] command/cache: Add flush command   Scott Wood
• [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Scott Wood
• [U-Boot] [PATCH 4/4] mtd: mxs_nand: Add support for i.MX6   Scott Wood
• [U-Boot] [v3] command/cache: Add flush command   Scott Wood
• [U-Boot] [v3] command/cache: Add flush command   Scott Wood
• [U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND   Scott Wood
• [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Add TWR-P10xx board support   Scott Wood
• [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash   Scott Wood
• [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format   Scott Wood
• [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash   Scott Wood
• [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash   Scott Wood
• [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash   Scott Wood
• [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash   Scott Wood
• [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Scott Wood
• [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399   Scott Wood
• [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support   Scott Wood
• [U-Boot] [RFC] command/cache: Add flush_cache command   Scott Wood
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH V2 2/6] nand: Add SPL_NAND support to mxc_nand_spl   Scott Wood
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support   Scott Wood
• [U-Boot] [PATCH 4/4 v2] mtd: mxs_nand: Add support for i.MX6   Scott Wood
• [U-Boot] [PATCH v4 0/3] arm: atmel: add at91sam9n12ek board support   Josh Wu
• [U-Boot] [PATCH v4 1/3] spi: atmel_spi: using ip version to check whether has wdrbt   Josh Wu
• [U-Boot] [PATCH v4 2/3] arm: at91: add at91sam9n12 register definition   Josh Wu
• [U-Boot] [PATCH v4 3/3] arm: at91: add at91sam9n12ek board support   Josh Wu
• [U-Boot] [U-boot] mmc write|read howto   Josh Wu
• [U-Boot] [U-boot] mmc write|read howto   Josh Wu
• [U-Boot] [U-boot] mmc write|read howto   Josh Wu
• [U-Boot] [PATCH] phylib: Add Atheros AR8035 GETH PHY support   Xie Xiaobo
• [U-Boot] [PATCH] powerpc/85xx: Add TWR-P10xx board support   Xie Xiaobo
• [U-Boot] [PATCH][v2] powerpc/85xx: Add TWR-P10xx board support   Xie Xiaobo
• [U-Boot] [PATCH v1] bf609: add SPI register base address   Sonic Zhang
• [U-Boot] [PATCH v1] blackfin: Move blackfin watchdog driver out of the blackfin arch folder.   Sonic Zhang
• [U-Boot] [PATCH v1] blackfin: Move blackfin serial driver out of blackfin arch folder.   Sonic Zhang
• [U-Boot] [PATCH v2] blackfin: Move blackfin watchdog driver out of the blackfin arch folder.   Sonic Zhang
• [U-Boot] [PATCH v3] blackfin: Move blackfin watchdog driver out of the blackfin arch folder.   Sonic Zhang
• [U-Boot] [PATCH v1] blackfin: Add comments for watchdog event initialization.   Sonic Zhang
• [U-Boot] [PATCH v1] mmc: bfin: Ensure MMR writing is done before next command.   Sonic Zhang
• [U-Boot] [PATCH v1] mmc: bfin: Ensure MMR writing is done before next command.   Sonic Zhang
• [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration   Kiril Zyapkov
• [U-Boot] phy ic isn't reset   alex
• [U-Boot] phy ic isn't reset   alex
• [U-Boot] phy ic isn't reset   alex
• [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support   wang alison
• [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support   wang alison
• [U-Boot] [PATCH 3/5] vybrid: add uart driver support   wang alison
• [U-Boot] [PATCH 5/5] vybrid: add ethernet driver support   wang alison
• [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot   amar_g
• [U-Boot] [PATCH V9 1/9] FDT: Add compatible string for DWMMC   amar_g
• [U-Boot] [PATCH V9 2/9] EXYNOS5: FDT: Add DWMMC device node data   amar_g
• [U-Boot] [PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues   amar_g
• [U-Boot] [PATCH V9 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC   amar_g
• [U-Boot] [PATCH V9 5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.   amar_g
• [U-Boot] [PATCH V9 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT   amar_g
• [U-Boot] [PATCH V9 7/9] MMC: APIs to support resize of EMMC boot partition   amar_g
• [U-Boot] [PATCH V9 8/9] SMDK5250: Enable EMMC booting   amar_g
• [U-Boot] [PATCH V9 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition   amar_g
• [U-Boot] USB detection in u-boot oin our custom board   amit
• [U-Boot] [PATCH v3] powerpc/mpc85xx: set clock-frequency for T4/B4 clockgen node   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH v5 0/7] Add gdsys ControlCenter Digital board   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5 1/7] Update gdsys email account   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5 5/7] Add Atmel I2C tpm   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v5 7/7] mpc85xx: Add gdsys ControlCenter Digital board   dirk.eibach at gdsys.cc
• [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file   festevam at gmail.com
• [U-Boot] [PATCH v3 2/3] mx6: Add solo-lite variant support   festevam at gmail.com
• [U-Boot] [PATCH v2 3/3] mx6sl: Add initial support for mx6slevk board   festevam at gmail.com
• [U-Boot] PCIe card doesn't work   goldenshore
• [U-Boot] ECCN code for uboot   takeshi.harada.hq at hitachi.com
• [U-Boot] ECCN code for uboot   takeshi.harada.hq at hitachi.com
• [U-Boot] ECCN code for uboot   takeshi.harada.hq at hitachi.com
• [U-Boot] [PATCH] video: exynos_fb: Add the missing #else clause   Ajay kumar
• [U-Boot] [PATCH] nds32: Use sections header to obtain link symbols   ken kuo
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Mathias leblanc
• [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Mathias leblanc
• [U-Boot] [Patch alt] common/cmd_test: Avoid macro expansion   sh1.park at lge.com
• [U-Boot] [PATCH 2/6 V4] Sound: MAX98095: Add the driver for codec   prem s
• [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register   prem s
• [U-Boot] Interrupt handling ARM cortex A9 ( Armv7) in u-boot   s_arm_uboot
• [U-Boot] [PATCH, v1] arm:trats: change auto-booting to boot kernel with separate device tree blob   a.wlodarczyk at samsung.com
• [U-Boot] mx28evk spi boot   smithknown
• [U-Boot] mx28evk spi boot   smithknown
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] PPC4XX Custom Board - Failing to read I2C   txcotrader
• [U-Boot] Question about Automatic Updates   TigerLiu at viatech.com.cn
• [U-Boot] DWMMC / DWMCI question   TigerLiu at viatech.com.cn
• [U-Boot] DWMMC / DWMCI question   TigerLiu at viatech.com.cn
• [U-Boot] burst transaction test   TigerLiu at viatech.com.cn
• [U-Boot] MIPI-CSI Support question   TigerLiu at viatech.com.cn
• [U-Boot] CONFIG_ARM_ERRATA_7XXXX question   TigerLiu at viatech.com.cn
• [U-Boot] CONFIG_ARM_ERRATA_7XXXX question   TigerLiu at viatech.com.cn
• [U-Boot] MIPI-CSI Support question   TigerLiu at viatech.com.cn
• [U-Boot] CONFIG_ARM_ERRATA_7XXXX question again   TigerLiu at viatech.com.cn
• [U-Boot] picture format   TigerLiu at viatech.com.cn
• [U-Boot] How to make DocBook   TigerLiu at viatech.com.cn
• [U-Boot] what is sandbox?   TigerLiu at viatech.com.cn
• [U-Boot] what is sandbox?   TigerLiu at viatech.com.cn
• [U-Boot] PCIe card doesn't work (wolfking2000)   wolfking
• [U-Boot] PCIe card doesn't work (wolfking2000)   wolfking
• [U-Boot] [v3] command/cache: Add flush command   sun york-R58495
• [U-Boot] [v3] command/cache: Add flush command   sun york-R58495
• [U-Boot] Questions about U-boot of customized MPC8315E board   zhenhuan
• [U-Boot] Questions about U-boot of customized MPC8315E board   du zhenhuan
• [U-Boot] Bug in fdt_fixup_fman_firmware   Николай Пузанов