[U-Boot] [U-Boot, V2] arm: omap: emif: Fix DDR3 init after warm reset

Tom Rini trini at ti.com
Mon Apr 29 22:21:26 CEST 2013


On Wed, Mar 27, 2013 at 08:24:42PM -0000, Lokesh Vutla wrote:

> EMIF supports a global warm reset mode, during which the
> EMIF keeps the SDRAM content. But if leveling is enabled
> at the time of warm reset for DDR3, the following steps
> needs to be done after warm reset:
> 1) Keep EMIF in self refresh mode.
> 2) Reset PHY to bring back the PHY to a known state.
> 3) Start Levelling procedure.
> Doing the same.
> And also enabling DLL lock and code output after warm reset.
> 
> Tested on OMAP5432 ES2.0
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130429/60367b32/attachment.pgp>


More information about the U-Boot mailing list