April 2013 Archives by thread
Starting: Mon Apr 1 00:38:07 CEST 2013
Ending: Tue Apr 30 23:15:33 CEST 2013
Messages: 2597
- [U-Boot] [PATCH] Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH 05/11] usb-gadget: add FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH 04/11] usb-ehci: add Faraday USB 2.0 EHCI controller support
Kuo-Jung Su
- [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy
Minkyu Kang
- [U-Boot] [PATCH V7 08/10] SMDK5250: Enable EMMC booting
Amarendra Reddy
- [U-Boot] [PATCH V7 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C
Amarendra Reddy
- [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature
Minkyu Kang
- [U-Boot] [PATCH v4 0/3] i.MX6 SabreSD and SabreAUTO bmode support
Fabio Estevam
- [U-Boot] [PATCH] Add initial support for mx6slevk board
Vikram Narayanan
- [U-Boot] [RFC] MAKEALL: Fix case substitution for old bash
York Sun
- [U-Boot] [PATCH v2 6/7] patman: Add Series-process-log tag to sort/uniq change logs
Doug Anderson
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Kim Phillips
- [U-Boot] [PATCH] video: bcm2835: fix build issues
Stephen Warren
- [U-Boot] [PATCH 2/2] samsung: trats2: add support for new board Trats2
Minkyu Kang
- [U-Boot] [PATCH 1/4 V3] EXYNOS5: FDT: Add compatible strings for Serial
Rajeshwari Birje
- [U-Boot] [PATCH] exynos: change indentation of defines in cpu.h
Minkyu Kang
- [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] [PATCH v2 10/11] amcc-common.h: minor white space cleanup
Stefan Roese
- [U-Boot] [PATCH v2 11/11] amcc-common.h: enable support for "env grep", "setexpr", and regex.
Stefan Roese
- [U-Boot] [PATCH 1/1 v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Javier Martinez Canillas
- [U-Boot] Support required for loading U-boot on SDRAM
Stefan Roese
- [U-Boot] [PATCH 1/3] ppc4xx: Add SPL support
Stefan Roese
- [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3
Andreas Bießmann
- [U-Boot] [PATCH 1/1 v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Andreas Bießmann
- [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor
Vivek Gautam
- [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints
Stefan Roese
- [U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031
Stefan Roese
- [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
Stefan Roese
- [U-Boot] [RFC] Bootcount improvements
Alexandre Dilly
- [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
Vivek Gautam
- [U-Boot] [PATCH 1/3] arm:goni: Adjustment of configuration for goni target
Arkadiusz Wlodarczyk
- [U-Boot] [PATCH V3 00/10] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups
Nishanth Menon
- [U-Boot] [PATCH] mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices
Stefan Roese
- [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Adnan Ali
- [U-Boot] u-boot boot process is broken, how do i recover?
JPT
- [U-Boot] [PATCH v5 3/3] mx6qsabre{sd, auto}: Add boot mode select
Stefano Babic
- [U-Boot] [PATCH v5 1/3] mx6qsabresd: Document the mapping of USDHC[2-4]
Stefano Babic
- [U-Boot] [PATCH v5 2/3] mx6qsabresd: Fix card detection for invalid card id case
Stefano Babic
- [U-Boot] [PATCH] mx28evk: Introduce a new target for saving env vars to NAND
Stefano Babic
- [U-Boot] [PATCH] mx6qsabrelite: README: No need to pass 'u-boot.imx'
Stefano Babic
- [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Stefano Babic
- [U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling
Stefano Babic
- [U-Boot] [PATCH] mx25pdk: Enable imxdi RTC
Stefano Babic
- [U-Boot] [PATCH] mx23_olinuxino: Change definitions to use spaces instead of tabs
Stefano Babic
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Stefano Babic
- [U-Boot] [PATCH v2] mx6: Fix get_board_rev() for the mx6 solo case
Stefano Babic
- [U-Boot] Unable to build u-boot for Marvell Aspenite board
Fabrice Mousset
- [U-Boot] Setting uboot env vars from OS
Jason Cipriani
- [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay
Simon Glass
- [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command
Tom Rini
- [U-Boot] [PATCH V2] ARM: bcm2835: fix get_timer() to return ms
Stephen Warren
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] Query
Ujjwal Zamad - PES
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq
Vadim Bendebury
- [U-Boot] My First Android App
Satendra...
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Pali Rohár
- [U-Boot] [PATCH v3 3/7] Add fuse API and commands
Benoît Thébaudeau
- [U-Boot] Patman / buildman pull request
Simon Glass
- [U-Boot] Require guidance
Rajdeep Vaghasia
- [U-Boot] [PATCH 2/6 V4] Sound: MAX98095: Add the driver for codec
prem s
- [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition
Wolfgang Denk
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Scott Wood
- [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND
Scott Wood
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jagan Teki
- [U-Boot] Handling images(.jpg, .bmp etc) in u-boot
Bhargav AK
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jagan Teki
- [U-Boot] which u-boot build config to choose for kirkwood?
JPT
- [U-Boot] U-Boot under coreboot
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH] Fix wrong >4G filtering
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH] VGA text console support
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH] i386 compiler args are wrong
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] Improper assumption of serial port
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH] VGA text console support
Wolfgang Denk
- [U-Boot] status i2c uboot driver ST Microelectronics
Mathias LEBLANC
- [U-Boot] [PATCH] kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
Gerlando Falauto
- [U-Boot] offer: program to deal with kirkwood "boot from UART"
JPT
- [U-Boot] Question about Automatic Updates
Wolfgang Denk
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Eric Bénard
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Otavio Salvador
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Fabio Estevam
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Eric Bénard
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Fabio Estevam
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Stefano Babic
- [U-Boot] "No status update" errors in OMAP mmc_send_cmd()
Michael Cashwell
- [U-Boot] [PATCH 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Tom Rini
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v4 2/4] cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT
Albert ARIBAUD
- [U-Boot] [PATCH v4 3/4] da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT
Albert ARIBAUD
- [U-Boot] [PATCH v4 4/4] smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Tom Rini
- [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v3 2/4] da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v3 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Tom Rini
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Heiko Schocher
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Heiko Schocher
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Heiko Schocher
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] da850evm, da840_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Benoît Thébaudeau
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Joe Hershberger
- [U-Boot] [PATCH v3 2/7] ubi: Expose a few simple functions from the cmd_ubi
Joe Hershberger
- [U-Boot] [PATCH v3 4/7] ubi: ubifs: Turn off verbose prints
Joe Hershberger
- [U-Boot] [PATCH v3 5/7] mtd: Make mtdparts work with pre-reloc env
Joe Hershberger
- [U-Boot] [PATCH v3 6/7] env: Add support for UBI environment
Joe Hershberger
- [U-Boot] [PATCH v3 7/7] env: Add redundant env support to UBI env
Joe Hershberger
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Tom Rini
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Stefan Roese
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Tom Rini
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Joe Hershberger
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Stefan Roese
- [U-Boot] [PATCH v3 1/7] ubi: Fix broken cleanup code in attach_by_scanning
Joe Hershberger
- [U-Boot] [PATCH v3 3/7] ubi: ubifs: Add documentation for README
Joe Hershberger
- [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy
Hung-ying Tyan
- [U-Boot] [PATCH V4 0/3] OMAP5: I2C: Enable support of I2C4 and I2C5 buses
Lubomir Popov
- [U-Boot] [PATCH V4 1/3] OMAP5: I2C: Enable i2c5 clocks
Lubomir Popov
- [U-Boot] [PATCH V4 2/3] OMAP5: I2C: Add I2C4 and I2C5 bases
Lubomir Popov
- [U-Boot] [PATCH V4 3/3] OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
Lubomir Popov
- [U-Boot] [PATCH] OMAP4: Fix bug in omap4460_volts struct
Lubomir Popov
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- [U-Boot] [PATCH v2 1/3] iomux-v3: Place pad control definitions into common file
Otavio Salvador
- [U-Boot] bootm does not work if netconsole is enabled
Michael Walle
- [U-Boot] [PATCH 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat)
Peter Korsgaard
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file
festevam at gmail.com
- [U-Boot] [PATCH v3 2/3] mx6: Add solo-lite variant support
festevam at gmail.com
- [U-Boot] [PATCH v2 3/3] mx6sl: Add initial support for mx6slevk board
festevam at gmail.com
- [U-Boot] [ARM] rolling u-boot-arm back then forward
Albert ARIBAUD
- [U-Boot] [PATCH v1 1/1] omap3: Display MHz instead of mHz on the console
Manfred Huber
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Build failure on am335x_evm
Mark Jackson
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Albert ARIBAUD
- [U-Boot] recommended method of netbooting kernel/dtb in u-boot?
Chris Friesen
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Mark Jackson
- [U-Boot] CONFIG option for second ethernet phy
Michal Simek
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Mark Jackson
- [U-Boot] How do I use AM335x eth1 rather than eth0 ? [SOLVED]
Mark Jackson
- [U-Boot] How do I use AM335x eth1 rather than eth0 ? [SOLVED]
Mark Jackson
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 1/8] usb: common: Weed out USB_**_PRINTFs from usb framework
Vivek Gautam
- [U-Boot] [PATCH v3 2/8] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] [PATCH v3 3/8] usb: hub: Power-cycle on root-hub ports
Vivek Gautam
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Julius Werner
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Vivek Gautam
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Julius Werner
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Vivek Gautam
- [U-Boot] [PATCH v3 4/8] usb: Update device class in usb device's descriptor
Vivek Gautam
- [U-Boot] [U-Boot, v3, 4/8] usb: Update device class in usb device's descriptor
Julius Werner
- [U-Boot] [PATCH v3 5/8] usb: hub: Fix enumration timeout
Vivek Gautam
- [U-Boot] [PATCH v3 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Julius Werner
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Marek Vasut
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Julius Werner
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Marek Vasut
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Marek Vasut
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Julius Werner
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [PATCH v3 7/8] usb: hub: Reset only usb 2.0 ports
Vivek Gautam
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Julius Werner
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Marek Vasut
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Vivek Gautam
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Vivek Gautam
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Marek Vasut
- [U-Boot] [PATCH v3 8/8] usb: common: Use a global macro for 'min3'
Vivek Gautam
- [U-Boot] [PATCH v3 8/8] usb: common: Use a global macro for 'min3'
Marek Vasut
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Marek Vasut
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Tom Rini
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Julius Werner
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/3] Add TI816X EVM support
TENART Antoine
- [U-Boot] [PATCH v3 1/3] Prepare for TI816X : reuse existing code from TI814X
TENART Antoine
- [U-Boot] [PATCH v3 2/3] Add TI816X support
TENART Antoine
- [U-Boot] [PATCH v3 3/3] Add TI816X evm board support
TENART Antoine
- [U-Boot] [PATCH v3 3/3] Add TI816X evm board support
TENART Antoine
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] Pending TPM patches for release
Simon Glass
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
wang alison
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
Fabio Estevam
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Jagan Teki
- [U-Boot] uboot_porting_guide
Carmine Garripoli
- [U-Boot] dtb vs. kernel command line arguments
Grant Likely
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] i.MX3 NAND: trying to understand OOB handling
Philip Paeps
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] [PATCH 3/3] x86: config: Init PCI before SPI
Simon Glass
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230
Stefano Babic
- [U-Boot] Please pull u-boot-x86.git
Simon Glass
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] phy ic isn't reset
alex
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] Remove duplicate / unused #defines on AM335x boards
Mark Jackson
- [U-Boot] USB Device Identification -- non-removable USB NAND flash
Curt Brune
- [U-Boot] Displaying characters on the display in u-boot
Bhargav A K
- [U-Boot] Driver Model Thoughts
Simon Glass
- [U-Boot] [PATCH 2/3] Makefile: Add target for combined u-boot.img & spl/u-boot.bin
Stefan Roese
- [U-Boot] [PATCH 3/3 v3] ppc4xx: Add lcd4_lwmon5 support
Stefan Roese
- [U-Boot] Please pull u-boot-ppc4xx/master
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PATCH 0/6] Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Dirk Eibach
- [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Che-liang Chiou
- [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Tom Rini
- [U-Boot] (Mixed security state) Re: [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Pfau, Reinhard
- [U-Boot] (Mixed security state) Re: [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Tom Rini
- [U-Boot] [PATCH 6/6] mpc85xx: Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH 2/6] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
Dirk Eibach
- [U-Boot] [PATCH 3/6] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Dirk Eibach
- [U-Boot] [PATCH 3/6] i2c: fsl_i2c:i2c_read(): dont try to write address w/ alen=0
Jim Chargin
- [U-Boot] [PATCH 3/6] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Fabio Estevam
- [U-Boot] [PATCH 4/6] Add Atmel I2C tpm
Dirk Eibach
- [U-Boot] [PATCH 5/6] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH 1/3] cm-t35: move cm-t35 to live in compulab directory
Igor Grinberg
- [U-Boot] [PATCH 2/3] MAINTAINERS: fix the cm-t35 board name
Igor Grinberg
- [U-Boot] [PATCH 3/3] cm-t35: update config file
Igor Grinberg
- [U-Boot] [U-Boot, 1/3] cm-t35: move cm-t35 to live in compulab directory
Tom Rini
- [U-Boot] [PATCH 0/11] Update gdsys ppc4xx-based boards
Dirk Eibach
- [U-Boot] [PATCH 02/11] powerpc/ppc4xx: Add gdsys mclink interface
Dirk Eibach
- [U-Boot] [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Dirk Eibach
- [U-Boot] [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Tom Rini
- [U-Boot] (WARNING!!! PGP with incorrect signature) Re: [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Eibach, Dirk
- [U-Boot] (WARNING!!! PGP with incorrect signature) Re: [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Tom Rini
- [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards
Dirk Eibach
- [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards
Stefan Roese
- [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards
Heiko Schocher
- [U-Boot] burst transaction test
TigerLiu at viatech.com.cn
- [U-Boot] burst transaction test
Wolfgang Denk
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Dirk Eibach
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Dirk Eibach
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Stefan Roese
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Dirk Eibach
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH 05/11] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
Dirk Eibach
- [U-Boot] [PATCH 06/11] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Dirk Eibach
- [U-Boot] [PATCH 07/11] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH 08/11] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware
Dirk Eibach
- [U-Boot] [PATCH 09/11] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup
Dirk Eibach
- [U-Boot] [PATCH 10/11] powerpc/ppc4xx: Consider gdsys FPGA OSD size
Dirk Eibach
- [U-Boot] [PATCH 11/11] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards
Dirk Eibach
- [U-Boot] [PATCH 01/11] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA
Dirk Eibach
- [U-Boot] [PATCH v2] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH 1/4] microblaze: Fix reset function
Michal Simek
- [U-Boot] [PATCH 01/14] arm: zynq: U-Boot udelay < 1000 FIX
Michal Simek
- [U-Boot] [PATCH v2 0/15] Xilinx Zynq patches
Michal Simek
- [U-Boot] [PATCH v2 0/4] Xilinx Microblaze patches
Michal Simek
- [U-Boot] [PATCH v2 1/4] microblaze: Fix reset function
Michal Simek
- [U-Boot] [PATCH v2 2/4] microblaze: Enable netconsole
Michal Simek
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] CONFIG_FIT on mx28evk board
Paul B. Henson
- [U-Boot] mx28evk initramfs load address
Paul B. Henson
- [U-Boot] [PATCH] git-mailrc: Add trini shortcut
Michal Simek
- [U-Boot] patman and buildman experience
Michal Simek
- [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze
Michal Simek
- [U-Boot] ECCN code for uboot
takeshi.harada.hq at hitachi.com
- [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] CONFIG_ARM_ERRATA_7XXXX question
TigerLiu at viatech.com.cn
- [U-Boot] CONFIG_ARM_ERRATA_7XXXX question
TigerLiu at viatech.com.cn
- [U-Boot] P2020RDB: Error while using P2020RDB_SDCARD
Franck Jullien
- [U-Boot] Questions about U-boot of customized MPC8315E board
du zhenhuan
- [U-Boot] Problems with Linker Symbols to make HAB on i.MX28 work
Christopher Preschern
- [U-Boot] [PATCH 1/2] fpga: Clean coding style
Michal Simek
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] mx23evk resets when loading the kernel
Fabio Estevam
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board
Igor Ferrara
- [U-Boot] [PATCH v1] mmc: bfin: Ensure MMR writing is done before next command.
Mike Frysinger
- [U-Boot] CONFIG_ARM_ERRATA_7XXXX question again
TigerLiu at viatech.com.cn
- [U-Boot] picture format
TigerLiu at viatech.com.cn
- [U-Boot] How to make DocBook
TigerLiu at viatech.com.cn
- [U-Boot] what is sandbox?
TigerLiu at viatech.com.cn
- [U-Boot] u-boot UBI support
Paul B. Henson
- [U-Boot] [PULL] : Please pull u-boot-i2c
Heiko Schocher
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] Pull request - zynq
Michal Simek
- [U-Boot] [PATCH] PHY: micrel.c: supplement support for KSZ9031
SARTRE Leo
- [U-Boot] [PATCH] net: phy: supplement support for Micrel's KSZ9031
SARTRE Leo
Last message date:
Tue Apr 30 23:15:33 CEST 2013
Archived on: Sun Sep 29 18:58:02 CEST 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).