[U-Boot] Please pull u-boot-ti/master

[Albert ARIBAUD]

Hi Tom,

On Mon, 8 Apr 2013 12:33:36 -0400, Tom Rini <trini at ti.com> wrote:

> Hello,
> 
> The following changes since commit 8bf3c322856f42d4db8acd7fa4f2a17898564064:
> 
>   logo: update to the new logo for ATMEL (2013-04-05 21:49:37 +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-ti.git master
> 
> for you to fetch changes up to dd2445ec1b839a5ca61ff8438a5b7aebb21b7986:
> 
>   omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE (2013-04-08 11:40:59 -0400)
> 
> ----------------------------------------------------------------
> Andreas Bießmann (6):
>       omap3/cpu.h: add BCH support
>       asm/omap_gpmc.h: consolidate common defines
>       omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
>       omap_gpmc: change nandecc command
>       omap_gpmc: add support for hw assisted BCH8
>       tricorder: enable hw assisted BCH8 in SPL and u-boot
> 
> Bin Liu (2):
>       musb: am335x: disable bulk split-combine feature
>       musb: set MUSB speed based on CONFIG
> 
> Hunter, Jon (4):
>       omap2420-h4: Fix DRAM initialisation
>       omap2420-h4: Fix booting from NOR flash
>       omap2420-h4: Add device tree support
>       omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
> 
> Lars Poeschel (1):
>       pcm051: Enable DDR PHY dynamic power down bit
> 
> Lokesh Vutla (1):
>       arm: omap4: Fix SDRAM AUTO DETECTION
> 
> Lubomir Popov (1):
>       OMAP: Fix copy-paste bug that did not enable UART4 clock
> 
> Manfred Huber (1):
>       omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
> 
> Nishanth Menon (1):
>       omap5: Allow use of a plain text env file
> 
> SRICHARAN R (4):
>       ARM: OMAP5: Rename omap5_evm to omap5_uevm
>       ARM: OMAP5: Set fdt_high to enable booting with Device tree
>       ARM: OMAP4/5: Change the default boot command to work with device tree
>       ARM: OMAP4/5: Make bootz as the default boot command
> 
> Tom Rini (5):
>       am335x: Enable MMC1 clock
>       doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
>       OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
>       omap5_uevm.h: Move uEVM-specific choices to omap5_uevm.h
>       omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
> 
>  README                                         |    8 -
>  arch/arm/cpu/arm1136/omap24xx/timer.c          |    8 +-
>  arch/arm/cpu/armv7/am33xx/clock_am33xx.c       |    5 +
>  arch/arm/cpu/armv7/am33xx/elm.c                |    2 +-
>  arch/arm/cpu/armv7/omap-common/clocks-common.c |    4 +-
>  arch/arm/cpu/armv7/omap-common/emif-common.c   |   29 +-
>  arch/arm/cpu/armv7/omap-common/lowlevel_init.S |   10 +-
>  arch/arm/cpu/armv7/omap3/board.c               |   31 +-
>  arch/arm/cpu/armv7/omap4/emif.c                |    1 -
>  arch/arm/cpu/armv7/omap5/emif.c                |    1 -
>  arch/arm/include/asm/arch-am33xx/omap_gpmc.h   |   58 +---
>  arch/arm/include/asm/arch-am33xx/spl.h         |    3 +
>  arch/arm/include/asm/arch-am33xx/sys_proto.h   |    2 +-
>  arch/arm/include/asm/arch-omap24xx/omap2420.h  |    6 +-
>  arch/arm/include/asm/arch-omap3/cpu.h          |    6 +
>  arch/arm/include/asm/arch-omap3/omap_gpmc.h    |   68 +---
>  arch/arm/include/asm/arch-omap3/spl.h          |    3 +
>  arch/arm/include/asm/arch-omap3/sys_proto.h    |    2 +-
>  arch/arm/include/asm/arch-omap4/omap.h         |    1 -
>  arch/arm/include/asm/arch-omap4/spl.h          |    2 +
>  arch/arm/include/asm/arch-omap5/omap.h         |    1 -
>  arch/arm/include/asm/arch-omap5/spl.h          |    2 +
>  arch/arm/include/asm/emif.h                    |    1 -
>  arch/arm/include/asm/omap_gpmc.h               |   87 +++++
>  board/isee/igep00x0/igep00x0.c                 |    2 +-
>  board/overo/overo.c                            |    2 +-
>  board/phytec/pcm051/board.c                    |    3 +-
>  board/ti/omap2420h4/config.mk                  |    4 +-
>  board/ti/omap2420h4/mem.c                      |   13 -
>  board/ti/omap2420h4/omap2420h4.c               |   24 +-
>  board/ti/{omap5_evm => omap5_uevm}/Makefile    |    0
>  board/ti/{omap5_evm => omap5_uevm}/evm.c       |    0
>  board/ti/{omap5_evm => omap5_uevm}/mux_data.h  |    0
>  boards.cfg                                     |    2 +-
>  doc/README.omap3                               |   28 ++
>  doc/feature-removal-schedule.txt               |   16 +
>  drivers/mtd/nand/omap_gpmc.c                   |  424 +++++++++++++++++-------
>  drivers/serial/ns16550.c                       |   18 +-
>  drivers/usb/musb-new/musb_core.c               |    7 +
>  drivers/usb/musb-new/musb_uboot.c              |    2 +-
>  include/configs/am335x_evm.h                   |    1 +
>  include/configs/dra7xx_evm.h                   |    2 +
>  include/configs/igep00x0.h                     |    3 -
>  include/configs/omap2420h4.h                   |    5 +-
>  include/configs/omap4_common.h                 |   22 +-
>  include/configs/omap5_common.h                 |   51 ++-
>  include/configs/{omap5_evm.h => omap5_uevm.h}  |   18 +
>  include/configs/tricorder.h                    |   13 +-
>  lib/Makefile                                   |    2 +-
>  49 files changed, 672 insertions(+), 331 deletions(-)
>  create mode 100644 arch/arm/include/asm/omap_gpmc.h
>  rename board/ti/{omap5_evm => omap5_uevm}/Makefile (100%)
>  rename board/ti/{omap5_evm => omap5_uevm}/evm.c (100%)
>  rename board/ti/{omap5_evm => omap5_uevm}/mux_data.h (100%)
>  rename include/configs/{omap5_evm.h => omap5_uevm.h} (70%)
> 
> Andreas' changes came well before the merge window, Everything else is a
> bugfix of some sort or another or part of keeping platforms still useful
> with later kernel releases.
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.