April 2013 Archives by date
Starting: Mon Apr 1 00:38:07 CEST 2013
Ending: Tue Apr 30 23:15:33 CEST 2013
Messages: 2597
- [U-Boot] [PATCH] Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH 05/11] usb-gadget: add FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH 04/11] usb-ehci: add Faraday USB 2.0 EHCI controller support
Kuo-Jung Su
- [U-Boot] [PATCH 00/11 v3] Fix and Re-organise PWM Timer
Akshay Saraswat
- [U-Boot] [PATCH 07/11 v3] Exynos: Add peripherial id for pwm
Akshay Saraswat
- [U-Boot] [PATCH]board/bsc9131rdb: Add targets for Sysclk 100MHz
Priyanka Jain
- [U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo
Akshay Saraswat
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Albert ARIBAUD
- [U-Boot] [PATCH v1] bf609: add SPI register base address
Sonic Zhang
- [U-Boot] [PATCH 00/11 v3] Fix and Re-organise PWM Timer
Minkyu Kang
- [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy
Minkyu Kang
- [U-Boot] [PATCH V7 08/10] SMDK5250: Enable EMMC booting
Amarendra Reddy
- [U-Boot] [PATCH V7 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C
Amarendra Reddy
- [U-Boot] [PATCH V7 10/10] EXYNOS5: I2C: Added FDT and non-FDT support for I2C
Minkyu Kang
- [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature
Minkyu Kang
- [U-Boot] [PATCH v4 0/3] i.MX6 SabreSD and SabreAUTO bmode support
Fabio Estevam
- [U-Boot] [PATCH v4 0/3] i.MX6 SabreSD and SabreAUTO bmode support
Otavio Salvador
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] Banner -> git co target?
Michael Cashwell
- [U-Boot] [PATCH] OMAP5: Power: Added more functionality to twl6035 driver
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] Banner -> git co target?
Anatolij Gustschin
- [U-Boot] Banner -> git co target?
Tom Rini
- [U-Boot] [PATCH] OMAP4/5: Add USB EHCI support
Lubomir Popov
- [U-Boot] [PATCH] OMAP5: Enable USB Ethernet support with LAN9730
Lubomir Popov
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Michael Cashwell
- [U-Boot] [PATCH V4 0/5] ARM: OMAP4/5: Add support to boot with device tree as default
Sricharan R
- [U-Boot] [PATCH V4 1/5] ARM: OMAP5: Rename omap5_evm to omap5_uevm
Sricharan R
- [U-Boot] [PATCH V4 2/5] ARM: OMAP5: Set fdt_high to enable booting with Device tree
Sricharan R
- [U-Boot] [PATCH V4 3/5] omap5: Allow use of a plain text env file
Sricharan R
- [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
Sricharan R
- [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command
Sricharan R
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-staging
Tom Rini
- [U-Boot] [PATCH] Add initial support for mx6slevk board
Vikram Narayanan
- [U-Boot] AM3517_EVM, MLO not booting
James Chandler
- [U-Boot] [PATCH] Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo
Simon Glass
- [U-Boot] [RFC] MAKEALL: Fix case substitution for old bash
York Sun
- [U-Boot] [Patch v8] Consolidate bool type
York Sun
- [U-Boot] Patches for this merge window
Simon Glass
- [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
Tom Rini
- [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
Tom Rini
- [U-Boot] [PATCH] mmc: don't allow extra cmdline arguments
Stephen Warren
- [U-Boot] [PATCH] Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] AM3517_EVM, MLO not booting
James Chandler
- [U-Boot] [PATCH v2 1/7] patman: Fix up checkpatch parsing to deal with 'CHECK' lines
Doug Anderson
- [U-Boot] [PATCH v2 2/7] patman: Don't allow spaces in tags
Doug Anderson
- [U-Boot] [PATCH v2 4/7] patman: Provide option to ignore bad aliases
Doug Anderson
- [U-Boot] [PATCH 0/4] Add support for TI TPS65090
Simon Glass
- [U-Boot] [PATCH 1/4] power: Add support for TPS65090 PMU chip.
Simon Glass
- [U-Boot] [PATCH 2/4] exynos5: Enable tps65090 on smdk5250
Simon Glass
- [U-Boot] [PATCH 3/4] power: Explicitly select pmic device's bus
Simon Glass
- [U-Boot] [PATCH 4/4] exynos5: support tps65090 pmic
Simon Glass
- [U-Boot] [PATCH v2 6/7] patman: Add Series-process-log tag to sort/uniq change logs
Doug Anderson
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Kim Phillips
- [U-Boot] [PATCH 1/3] wandboard: Remove duplicate 'mmc dev'
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Remove duplicate 'mmc dev'
Fabio Estevam
- [U-Boot] [PATCH 3/3] wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
Fabio Estevam
- [U-Boot] [PATCH] video: bcm2835: fix build issues
Stephen Warren
- [U-Boot] [PATCH] Add initial support for mx6slevk board
Vikram Narayanan
- [U-Boot] [PATCH] video: bcm2835: fix build issues
Anatolij Gustschin
- [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
Vivek Gautam
- [U-Boot] [PATCH 2/2] samsung: trats2: add support for new board Trats2
Minkyu Kang
- [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature
Rajeshwari Birje
- [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
Marek Vasut
- [U-Boot] [PATCH 3/4] power: Explicitly select pmic device's bus
Rajeshwari Birje
- [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin numbering feature
Minkyu Kang
- [U-Boot] [PATCH 1/4 V3] EXYNOS5: FDT: Add compatible strings for Serial
Rajeshwari Birje
- [U-Boot] [PATCH] exynos: change indentation of defines in cpu.h
Minkyu Kang
- [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
Vivek Gautam
- [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
Vivek Gautam
- [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
Marek Vasut
- [U-Boot] Warning messages in latest u-boot-samsung
Rajeshwari Birje
- [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
Marek Vasut
- [U-Boot] [PATCH 0/4 V4] SMDK5250: FDT: Add device tree support for console
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4 V4] EXYNOS5: FDT: Add compatible strings for Serial
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4 V4] EXYNOS5: FDT: Add serial device node values
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4 V4] S5P: Serial: Add fdt support to driver
Rajeshwari Shinde
- [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
Marek Vasut
- [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] AM3517_EVM, MLO not booting
Andreas Bießmann
- [U-Boot] AM3517_EVM, MLO not booting
Manfred Huber
- [U-Boot] [PATCH v2 10/11] amcc-common.h: minor white space cleanup
Stefan Roese
- [U-Boot] [PATCH v2 11/11] amcc-common.h: enable support for "env grep", "setexpr", and regex.
Stefan Roese
- [U-Boot] [PATCH 1/1 v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Javier Martinez Canillas
- [U-Boot] Warning messages in latest u-boot-samsung
Albert ARIBAUD
- [U-Boot] Support required for loading U-boot on SDRAM
Stefan Roese
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Linus Walleij
- [U-Boot] [PATCH 1/3] ppc4xx: Add SPL support
Stefan Roese
- [U-Boot] [PATCH 1/3 v2] ppc4xx: Add SPL support
Stefan Roese
- [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3
Andreas Bießmann
- [U-Boot] [PATCH 2/2] samsung: trats2: add support for new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Albert ARIBAUD
- [U-Boot] [PATCH 1/1 v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Andreas Bießmann
- [U-Boot] Warning messages in latest u-boot-samsung
Rajeshwari Birje
- [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor
Vivek Gautam
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Sricharan R
- [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
Vivek Gautam
- [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports
Vivek Gautam
- [U-Boot] Warning messages in latest u-boot-samsung
Albert ARIBAUD
- [U-Boot] [PATCH 6/7] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] Warning messages in latest u-boot-samsung
Minkyu Kang
- [U-Boot] [PATCH v4 0/7] Add cros-ec protocol driver and enable it in smdk5250
Hung-ying Tyan
- [U-Boot] [PATCH v4 1/7] cros: add cros_ec driver
Hung-ying Tyan
- [U-Boot] [PATCH v4 2/7] cros: add I2C support for cros_ec
Hung-ying Tyan
- [U-Boot] [PATCH v4 3/7] cros: add SPI support for cros_ec
Hung-ying Tyan
- [U-Boot] [PATCH v4 4/7] cros: add LPC support for cros_ec
Hung-ying Tyan
- [U-Boot] [PATCH v4 5/7] cros: adds cros_ec keyboard driver
Hung-ying Tyan
- [U-Boot] [PATCH v4 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts
Hung-ying Tyan
- [U-Boot] [PATCH v4 7/7] cros: enable cros-ec for smdk5250
Hung-ying Tyan
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Andrew Gabbasov
- [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports
Marek Vasut
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Linus Walleij
- [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor
Marek Vasut
- [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports
Vivek Gautam
- [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor
Vivek Gautam
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Albert ARIBAUD
- [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports
Marek Vasut
- [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints
Stefan Roese
- [U-Boot] Warning messages in latest u-boot-samsung
Rajeshwari Birje
- [U-Boot] [PATCH 1/3] wandboard: Remove duplicate 'mmc dev'
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Remove duplicate 'mmc dev'
Otavio Salvador
- [U-Boot] [PATCH 3/3] wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
Otavio Salvador
- [U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031
Stefan Roese
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Michael Cashwell
- [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
Stefan Roese
- [U-Boot] [PATCH, v1] arm:trats: change auto-booting to boot kernel with separate device tree blob
a.wlodarczyk at samsung.com
- [U-Boot] [RFC] Bootcount improvements
Alexandre Dilly
- [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
Vivek Gautam
- [U-Boot] [PATCH 1/3] arm:goni: Adjustment of configuration for goni target
Arkadiusz Wlodarczyk
- [U-Boot] [PATCH V3 00/10] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups
Nishanth Menon
- [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command
Adnan Ali
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Adnan Ali
- [U-Boot] [PATCH] mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices
Stefan Roese
- [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Sricharan R
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Tom Rini
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Robert Nelson
- [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
Sricharan R
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Adnan Ali
- [U-Boot] [PATCH] ARMv7: start.S: stay in HYP mode if u-boot is entered in it
Andre Przywara
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Robert Nelson
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Sricharan R
- [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support
Andreas Bießmann
- [U-Boot] [PATCH v2 2/6] asm/omap_gpmc.h: consolidate common defines
Andreas Bießmann
- [U-Boot] [PATCH v2 3/6] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
Andreas Bießmann
- [U-Boot] [PATCH v2 4/6] omap_gpmc: change nandecc command
Andreas Bießmann
- [U-Boot] [PATCH v2 5/6] omap_gpmc: add support for hw assisted BCH8
Andreas Bießmann
- [U-Boot] [PATCH v2 6/6] tricorder: enable hw assisted BCH8 in SPL and u-boot
Andreas Bießmann
- [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
Tom Rini
- [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3
Tom Rini
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Otavio Salvador
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Otavio Salvador
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Tom Rini
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Tom Rini
- [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
Sricharan R
- [U-Boot] AM3517_EVM, MLO not booting
James Chandler
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Adnan Ali
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Adnan Ali
- [U-Boot] Potential issue with recent OMAP PRCM struct unification
Sricharan R
- [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Tom Rini
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Dirk Behme
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Gabbasov, Andrew
- [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints
Tom Rini
- [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Michael Cashwell
- [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Tom Rini
- [U-Boot] [Patch v8] Consolidate bool type
Tom Rini
- [U-Boot] [PATCH 2/2] OMAP4/5: I2C: New I2C driver files added
Tom Rini
- [U-Boot] [PATCH] Tegra: Split tegra_get_chip_type() into _soc and _sku functions
Tom Warren
- [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support
Tom Rini
- [U-Boot] [PATCH v2 2/6] asm/omap_gpmc.h: consolidate common defines
Tom Rini
- [U-Boot] [PATCH v2 3/6] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
Tom Rini
- [U-Boot] [PATCH v2 4/6] omap_gpmc: change nandecc command
Tom Rini
- [U-Boot] [PATCH v2 5/6] omap_gpmc: add support for hw assisted BCH8
Tom Rini
- [U-Boot] [PATCH] Tegra: Split tegra_get_chip_type() into _soc and _sku functions
Stephen Warren
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] OMAP (4) boot_params
Michael Cashwell
- [U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
Aaron Williams
- [U-Boot] [PATCH] cfi_flash: Use uintptr_t for casts from u32 to void *
Stefan Roese
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Stefan Roese
- [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Michael Cashwell
- [U-Boot] OMAP (4) boot_params
Albert ARIBAUD
- [U-Boot] [PATCH v10 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Benoît Thébaudeau
- [U-Boot] [PATCH v10 02/30] mtd: nand: mxc_nand: Fix is_16bit_nand()
Benoît Thébaudeau
- [U-Boot] [PATCH v10 03/30] nand: mxc: Prepare to add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v10 04/30] nand: mxc: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v10 05/30] imx: mx5: lowlevel_init: Simplify code
Benoît Thébaudeau
- [U-Boot] [PATCH v10 06/30] imx: mx53ard: Add support for NAND Flash
Benoît Thébaudeau
- [U-Boot] [PATCH v10 07/30] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
Benoît Thébaudeau
- [U-Boot] [PATCH v10 08/30] nand: mxc: Use appropriate page number in syndrome functions
Benoît Thébaudeau
- [U-Boot] [PATCH v10 09/30] arm: start.S: Fix _TEXT_BASE for SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v10 10/30] arm: relocate_code() is no longer noreturn
Benoît Thébaudeau
- [U-Boot] [PATCH v10 11/30] arm1136: Remove redundant relocate_code() return
Benoît Thébaudeau
- [U-Boot] [PATCH v10 12/30] arm: relocate_code(): Remove useless relocation offset computation
Benoît Thébaudeau
- [U-Boot] [PATCH v10 13/30] arm: relocate_code(): Use __image_copy_end for end of relocation
Benoît Thébaudeau
- [U-Boot] [PATCH v10 14/30] arm: crt0.S: Remove bogus .globl
Benoît Thébaudeau
- [U-Boot] [PATCH v10 15/30] autoconfig.mk: Make it possible to define configs from other configs
Benoît Thébaudeau
- [U-Boot] [PATCH v10 16/30] Makefile: Change CONFIG_SPL_PAD_TO to image offset
Benoît Thébaudeau
- [U-Boot] [PATCH v10 17/30] imx: Fix automatic make targets for imx images
Benoît Thébaudeau
- [U-Boot] [PATCH v10 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v10 19/30] arm926ejs: Remove deprecated and now unused NAND SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v10 20/30] arm: Remove unused relocate_code() parameters
Benoît Thébaudeau
- [U-Boot] [PATCH v10 21/30] Makefile: Move SHELL setup to config.mk
Benoît Thébaudeau
- [U-Boot] [PATCH v10 22/30] .gitignore: Add /SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v10 23/30] imx: Add u-boot-with-spl.imx make target
Benoît Thébaudeau
- [U-Boot] [PATCH v10 24/30] imx: Add u-boot-with-nand-spl.imx make target
Benoît Thébaudeau
- [U-Boot] [PATCH v10 25/30] arm: Remove support for smdk6400
Benoît Thébaudeau
- [U-Boot] [PATCH v10 26/30] Revert "mkconfig: start deprecating Makefile config targets"
Benoît Thébaudeau
- [U-Boot] [PATCH v10 27/30] arm: Remove support for unused s3c64xx
Benoît Thébaudeau
- [U-Boot] [PATCH v10 28/30] arm: Remove deprecated and now unused NAND SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v10 29/30] arm1176: Remove unused MMU setup from start.S
Benoît Thébaudeau
- [U-Boot] [PATCH v10 30/30] arm: Make all linker scripts compatible with per-symbol sections
Benoît Thébaudeau
- [U-Boot] [PATCH 0/4] Exynos5: Add cpu freq and tmu throttling
Akshay Saraswat
- [U-Boot] [PATCH 1/4] pmic: max77686: add pmic_set_voltage api for max77686
Akshay Saraswat
- [U-Boot] [PATCH 2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5
Akshay Saraswat
- [U-Boot] [PATCH 3/4] smdk5250: enable support for tmu throttling
Akshay Saraswat
- [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq
Akshay Saraswat
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Gabbasov, Andrew
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Gabbasov, Andrew
- [U-Boot] [PATCH] Makefile: fix clobber target
Andreas Bießmann
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Albert ARIBAUD
- [U-Boot] u-boot boot process is broken, how do i recover?
JPT
- [U-Boot] [PATCH v5 3/3] mx6qsabre{sd, auto}: Add boot mode select
Stefano Babic
- [U-Boot] [PATCH v5 1/3] mx6qsabresd: Document the mapping of USDHC[2-4]
Stefano Babic
- [U-Boot] [PATCH v5 2/3] mx6qsabresd: Fix card detection for invalid card id case
Stefano Babic
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Albert ARIBAUD
- [U-Boot] [PATCH] mx28evk: Introduce a new target for saving env vars to NAND
Stefano Babic
- [U-Boot] [PATCH] mx6qsabrelite: README: No need to pass 'u-boot.imx'
Stefano Babic
- [U-Boot] u-boot boot process is broken, how do i recover?
Albert ARIBAUD
- [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Stefano Babic
- [U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling
Stefano Babic
- [U-Boot] [PATCH] mx25pdk: Enable imxdi RTC
Stefano Babic
- [U-Boot] [PATCH] mx23_olinuxino: Change definitions to use spaces instead of tabs
Stefano Babic
- [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Dirk Behme
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Stefano Babic
- [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Stefano Babic
- [U-Boot] [PATCH v2] mx6: Fix get_board_rev() for the mx6 solo case
Stefano Babic
- [U-Boot] [PATCH 1/3] wandboard: Remove duplicate 'mmc dev'
Stefano Babic
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Remove duplicate 'mmc dev'
Stefano Babic
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Javier Martinez Canillas
- [U-Boot] [PATCH 3/3] wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
Stefano Babic
- [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
Stefano Babic
- [U-Boot] [PATCH v10 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Javier Martinez Canillas
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Stefano Babic
- [U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Stefano Babic
- [U-Boot] u-boot boot process is broken, how do i recover?
JPT
- [U-Boot] [PATCH 0/3 V5] EXYNOS5: Add GPIO numbering feature
Rajeshwari Shinde
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature
Rajeshwari Shinde
- [U-Boot] [PATCH 2/3 V5] S5P: Rename GPIO definitions
Rajeshwari Shinde
- [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
Rajeshwari Shinde
- [U-Boot] u-boot boot process is broken, how do i recover?
Albert ARIBAUD
- [U-Boot] [PATCH] EXYNOS: Move includes from setup.h to tzpc_init.c
Rajeshwari Shinde
- [U-Boot] [PATCH 0/2] Add initial support for AQUILA-CYGNUS
Enric Balletbo i Serra
- [U-Boot] [PATCH 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS.
Enric Balletbo i Serra
- [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS
Enric Balletbo i Serra
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] [PATCH 0/5] ARM: vexpress: add support for more core tiles
Andre Przywara
- [U-Boot] [PATCH 1/5] ARM: vexpress: move files in preparation for adding a new platform
Andre Przywara
- [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config
Andre Przywara
- [U-Boot] [PATCH 3/5] ARM: vexpress: create A5 specific board config
Andre Przywara
- [U-Boot] [PATCH 4/5] ARM: vexpress: add support for Versatile Express Cortex-A15-TC2
Andre Przywara
- [U-Boot] [PATCH 5/5] ARM: vexpress: enable bootz and hush parser for all VExpress boards
Andre Przywara
- [U-Boot] OMAP (4) boot_params
Michael Cashwell
- [U-Boot] [RFC] command/cache: Add flush_cache command
Jim Chargin
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Eric Nelson
- [U-Boot] [PATCH V8 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and
Amar
- [U-Boot] [PATCH V8 1/9] FDT: Add compatible string for DWMMC
Amar
- [U-Boot] [PATCH V8 2/9] EXYNOS5: FDT: Add DWMMC device node data
Amar
- [U-Boot] [PATCH V8 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amar
- [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amar
- [U-Boot] [PATCH V8 5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
Amar
- [U-Boot] [PATCH V8 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
Amar
- [U-Boot] [PATCH V8 7/9] MMC: APIs to support resize of EMMC boot partition
Amar
- [U-Boot] [PATCH V8 8/9] SMDK5250: Enable EMMC booting
Amar
- [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Amar
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Eric Nelson
- [U-Boot] OMAP (4) boot_params
Albert ARIBAUD
- [U-Boot] [PATCH] pcm051: Enable DDR PHY dynamic power down bit
Lars Poeschel
- [U-Boot] Unable to build u-boot for Marvell Aspenite board
Fabrice Mousset
- [U-Boot] Subject: [PATCH 1/2] OMAP4: Add ID for OMAP4470_ES1_0
Lubomir Popov
- [U-Boot] [PATCH 2/2] OMAP4: Add basic support for OMAP4470/TWL6032
Lubomir Popov
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Stefano Babic
- [U-Boot] [PATCH v3 4/6] omap_gpmc: change nandecc command
Andreas Bießmann
- [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8
Andreas Bießmann
- [U-Boot] [PATCH 1/4] Tegra: All Tamonten-derived boards use onboard NAND
Thierry Reding
- [U-Boot] [PATCH 2/4] Tegra: Medcom-Wide: Enable NAND and boot script support
Thierry Reding
- [U-Boot] [PATCH 3/4] Tegra: Plutux: Enable NAND and boot script support
Thierry Reding
- [U-Boot] [PATCH 4/4] Tegra: TEC: Enable boot script support
Thierry Reding
- [U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
Eric Nelson
- [U-Boot] OMAP (4) boot_params
Michael Cashwell
- [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
Adnan Ali
- [U-Boot] mmc: don't allow extra cmdline arguments
Tom Rini
- [U-Boot] replace last __bss_end__ occurrences with __bss_end
Tom Rini
- [U-Boot] [U-Boot, V2] disk: fix unaligned access in efi partitions
Tom Rini
- [U-Boot] [U-Boot, V2] README: document the requirements for CONFIG_SYS_HZ
Tom Rini
- [U-Boot] build: Fix make errors generated when building 'distclean'
Tom Rini
- [U-Boot] env: fix potential stack overflow in environment functions
Tom Rini
- [U-Boot] MAKEALL: Fix case substitution for old bash
Tom Rini
- [U-Boot] [U-Boot, v2] dts/Makefile: Build the user specified dts
Tom Rini
- [U-Boot] biosemu: include <asm/io.h> header
Tom Rini
- [U-Boot] OMAP (4) boot_params
Albert ARIBAUD
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Tom Rini
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] OMAP (4) boot_params
Tom Rini
- [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command
Tom Rini
- [U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling
Dirk Behme
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Linus Walleij
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Stefan Roese
- [U-Boot] [PATCH 1/4] Tegra: All Tamonten-derived boards use onboard NAND
Stephen Warren
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command
Adnan Ali
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Gabbasov, Andrew
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Anatolij Gustschin
- [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command
Tom Rini
- [U-Boot] Setting uboot env vars from OS
Jason Cipriani
- [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay
Simon Glass
- [U-Boot] [PATCH] am335x: Enable MMC1 clock
Tom Rini
- [U-Boot] [PATCH] mmc: Define a constant for the maximum block size
Simon Glass
- [U-Boot] [PATCH] usb: net: Move software resets to basic_init
Simon Glass
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] Setting uboot env vars from OS
Jason Cipriani
- [U-Boot] [PATCH 0/4] omap2420-h4: Fix u-boot support for board
Jon Hunter
- [U-Boot] [PATCH 1/4] omap2420-h4: Fix DRAM initialisation
Jon Hunter
- [U-Boot] [PATCH 2/4] omap2420-h4: Fix booting from NOR flash
Jon Hunter
- [U-Boot] [PATCH 3/4] omap2420-h4: Add device tree support
Jon Hunter
- [U-Boot] [PATCH 4/4] omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
Jon Hunter
- [U-Boot] [PATCH 4/4] omap2420h4: Fix get_timer() and CONFIG_SYS_HZ
Jon Hunter
- [U-Boot] [PATCH 4/4] omap2420h4: Fix get_timer() and CONFIG_SYS_HZ
Jon Hunter
- [U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command
Tom Rini
- [U-Boot] [PATCH] patman: Ignore all Gerrit Commit-* tags
Simon Glass
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Fabio Estevam
- [U-Boot] [PATCH v5 8/8] buildman - U-Boot multi-threaded builder and summary tool
Simon Glass
- [U-Boot] [STATUS] v2013.04-rc2 released
Tom Rini
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Tom Rini
- [U-Boot] [PATCH] fsl_esdhc: flush cache after IO completion
Eric Nelson
- [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS
Tom Rini
- [U-Boot] [PATCH] Tegra114: Initialize System Counter (TSC) with osc frequency
Tom Warren
- [U-Boot] [PATCH] patman: Ignore all Gerrit Commit-* tags
Doug Anderson
- [U-Boot] [PATCH] Tegra: Fix MSELECT clock divisors for T30/T114.
Tom Warren
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] [PATCH] Tegra114: Initialize System Counter (TSC) with osc frequency
Stephen Warren
- [U-Boot] [PATCH] Tegra: Fix MSELECT clock divisors for T30/T114.
Stephen Warren
- [U-Boot] [PATCH] Tegra114: Initialize System Counter (TSC) with osc frequency
Tom Warren
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] [PATCH V2] ARM: bcm2835: fix get_timer() to return ms
Stephen Warren
- [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
Marek Vasut
- [U-Boot] [PATCH] board/bsc9131rdb: Add DSP side tlb and laws
Priyanka Jain
- [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi
Tetsuyuki Kobayashi
- [U-Boot] [PATCH] cfi_flash: Use uintptr_t for casts from u32 to void *
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] [PATCH] integrator: enable device tree
Linus Walleij
- [U-Boot] OMAP (4) boot_params
Wolfgang Denk
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Linus Walleij
- [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi
Albert ARIBAUD
- [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi
Albert ARIBAUD
- [U-Boot] USB3.0 Interrupt transfer in u-boot
Puneet Sharma
- [U-Boot] [PATCH V1 0/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C
Amar
- [U-Boot] [PATCH V1 1/1] EXYNOS5: I2C: Add FDT and non-FDT support for I2C
Amar
- [U-Boot] [PATCH] EXYNOS: Add API for power reset and shutdown
Rajeshwari Shinde
- [U-Boot] [PATCH V2] ARM: bcm2835: fix get_timer() to return ms
Albert ARIBAUD
- [U-Boot] [PATCH] flash: Add optional verify-after-write feature
Stefan Roese
- [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS
Enric Balletbo Serra
- [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS
Enric Balletbo Serra
- [U-Boot] u-boot boot process is broken, how do i recover?
Thomas Petazzoni
- [U-Boot] [STATUS] v2013.04-rc2 released
Albert ARIBAUD
- [U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [STATUS] v2013.04-rc2 released
Stefano Babic
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Albert ARIBAUD
- [U-Boot] [PATCH] board/bsc9131rdb: Update default boot environment settings
Priyanka Jain
- [U-Boot] u-boot boot process is broken, how do i recover?
Albert ARIBAUD
- [U-Boot] [STATUS] v2013.04-rc2 released
Andreas Bießmann
- [U-Boot] [STATUS] v2013.04-rc2 released
Albert ARIBAUD
- [U-Boot] Query
Ujjwal Zamad - PES
- [U-Boot] [PATCH 1/5] ARM: vexpress: move files in preparation for adding a new platform
Albert ARIBAUD
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config
Albert ARIBAUD
- [U-Boot] u-boot boot process is broken, how do i recover?
JPT
- [U-Boot] [PATCH] BUGFIX: arm: armv7: data abort in get_bad_stack_swi
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 1/5] ARM: vexpress: move files in preparation for adding a new platform
Andre Przywara
- [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config
Andre Przywara
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
Vivek Gautam
- [U-Boot] USB3.0 Interrupt transfer in u-boot
Vivek Gautam
- [U-Boot] [PATCH v2 0/9] Introduce Samsung's new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH v2 1/9] pmic:max77686: add function to set voltage and mode
Piotr Wilczek
- [U-Boot] [PATCH v2 2/9] drivers:power:max77693: add support for new multi function pmic max77693
Piotr Wilczek
- [U-Boot] [PATCH v2 3/9] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
Piotr Wilczek
- [U-Boot] [PATCH v2 4/9] i2c:multi_i2c: add new macros I2C_7 and I2C_10
Piotr Wilczek
- [U-Boot] [PATCH v2 5/9] power: fix pmic command
Piotr Wilczek
- [U-Boot] [PATCH v2 6/9] drivers:video:s6e8ax0: change data_to_send array to static
Piotr Wilczek
- [U-Boot] [PATCH v2 7/9] drivers:lcd: fix unaligned access on lcd
Piotr Wilczek
- [U-Boot] [PATCH v2 8/9] samsung: trats2: add support for new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH v2 9/9] Add a maintainer entry for the Trats2 board.
Piotr Wilczek
- [U-Boot] [PATCH 2/5] ARM: vexpress: create A9 specific board config
Albert ARIBAUD
- [U-Boot] USB3.0 Interrupt transfer in u-boot
Puneet Sharma
- [U-Boot] [PATCH] exynos: change indentation of defines in cpu.h
Minkyu Kang
- [U-Boot] [STATUS] v2013.04-rc2 released
Mats Kärrman
- [U-Boot] [PATCH v2 8/9] samsung: trats2: add support for new board Trats2
Jaehoon Chung
- [U-Boot] [PATCH v2 8/9] samsung: trats2: add support for new board Trats2
Piotr Wilczek
- [U-Boot] [PATCH] flash: Add optional verify-after-write feature
Wolfgang Denk
- [U-Boot] u-boot boot process is broken, how do i recover?
Albert ARIBAUD
- [U-Boot] Query
Wolfgang Denk
- [U-Boot] [PATCH v2 9/9] Add a maintainer entry for the Trats2 board.
Wolfgang Denk
- [U-Boot] [STATUS] v2013.04-rc2 released
Wolfgang Denk
- [U-Boot] [PATCH] flash: Add optional verify-after-write feature
Stefan Roese
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH v2 9/9] Add a maintainer entry for the Trats2 board.
Piotr Wilczek
- [U-Boot] [PATCH 0/1] OMAP4/5: I2C: New read/write/probe functions
Lubomir Popov
- [U-Boot] [PATCH 1/1] OMAP4/5: I2C: New read/write/probe functions
Lubomir Popov
- [U-Boot] [PATCH v2] flash: Add optional verify-after-write feature
Stefan Roese
- [U-Boot] [PATCH] mpc5200: a3m071/a4m2k: Enable flash verify option
Stefan Roese
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Albert ARIBAUD
- [U-Boot] OMAP (4) boot_params
Michael Cashwell
- [U-Boot] [PATCH] video: exynos_fb: Add the missing #else clause
Ajay Kumar
- [U-Boot] [PATCH 1/2] dfu:ext4:fix: Change ext4write command order of parameters
Lukasz Majewski
- [U-Boot] [PATCH 2/2] dfu: Increase DFU buffer size from 4MiB to 8MiB
Lukasz Majewski
- [U-Boot] [STATUS] v2013.04-rc2 released
Scott Wood
- [U-Boot] [PATCH v2] OMAP: Fix copy-paste bug that did not enable UART4 clock
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP5: I2C: Add I2C4 and I2C5 bases
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0
Lubomir Popov
- [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq
Vadim Bendebury
- [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0
Nishanth Menon
- [U-Boot] [PATCH v2] OMAP5: I2C: Add I2C4 and I2C5 bases
Nishanth Menon
- [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0
Lubomir Popov
- [U-Boot] My First Android App
Satendra...
- [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq
Akshay Saraswat
- [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0
Nishanth Menon
- [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0
Tom Rini
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Pali Rohár
- [U-Boot] [PATCH v2] OMAP4: Add ID for OMAP4470_ES1_0
Nishanth Menon
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Gabbasov, Andrew
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Fabio Estevam
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Fleming Andy-AFLEMING
- [U-Boot] [PATCH] env_onenand.c: Add missing cast in saveenv()
Tom Rini
- [U-Boot] [PATCH] am335x: Enable MMC1 clock
Peter Korsgaard
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] [PATCH v3 3/7] Add fuse API and commands
Benoît Thébaudeau
- [U-Boot] OMAP (4) boot_params
Tom Rini
- [U-Boot] [PATCH 2/4 V4] EXYNOS5: FDT: Add serial device node values
Simon Glass
- [U-Boot] [PATCH 3/4 V4] S5P: Serial: Add fdt support to driver
Simon Glass
- [U-Boot] [PATCH v4 1/7] cros: add cros_ec driver
Simon Glass
- [U-Boot] [PATCH] biosemu: include <asm/io.h> header
Tom Rini
- [U-Boot] [PATCH v4 2/7] cros: add I2C support for cros_ec
Simon Glass
- [U-Boot] [PATCH v4 3/7] cros: add SPI support for cros_ec
Simon Glass
- [U-Boot] [PATCH v4 4/7] cros: add LPC support for cros_ec
Simon Glass
- [U-Boot] [PATCH v4 5/7] cros: adds cros_ec keyboard driver
Simon Glass
- [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS
Tom Rini
- [U-Boot] [PATCH v4 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts
Simon Glass
- [U-Boot] [PATCH v4 7/7] cros: enable cros-ec for smdk5250
Simon Glass
- [U-Boot] [PATCH 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS
Tom Rini
- [U-Boot] [PATCH v4 0/7] Add cros-ec protocol driver and enable it in smdk5250
Simon Glass
- [U-Boot] [STATUS] v2013.04-rc2 released
Simon Glass
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Wolfgang Denk
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
York Sun
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
York Sun
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Pali Rohár
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
York Sun
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Pali Rohár
- [U-Boot] Patman / buildman pull request
Simon Glass
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
York Sun
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Tom Rini
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Wolfgang Denk
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
York Sun
- [U-Boot] [PATCH] common/cmd_test: Avoid macro expansion
York Sun
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
Wolfgang Denk
- [U-Boot] [Patch v2] common/cmd_test: Avoid macro expansion
York Sun
- [U-Boot] [Patch alt] common/cmd_test: Avoid macro expansion
York Sun
- [U-Boot] [PATCH] CRITICAL error in v2013.04-rc2 (true and false not working)
York Sun
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Rommel Custodio
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Benoît Thébaudeau
- [U-Boot] [Patch alt] common/cmd_test: Avoid macro expansion
sh1.park at lge.com
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Benoît Thébaudeau
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] [PATCH v2] BUGFIX: arm: data abort in get_bad_stack_swi
Tetsuyuki Kobayashi
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Benoît Thébaudeau
- [U-Boot] [PATCH] nand/fsl_ifc: Convert to self-init
Prabhakar Kushwaha
- [U-Boot] CAN support in u-boot
Puneet Sharma
- [U-Boot] [PATCH] arm: omap4: Fix SDRAM AUTO DETECTION
Lokesh Vutla
- [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
Sricharan R
- [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command
Sricharan R
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Stefan Roese
- [U-Boot] [PATCH] arm: omap4: Fix SDRAM AUTO DETECTION
Lokesh Vutla
- [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Jaehoon Chung
- [U-Boot] Require guidance
Rajdeep Vaghasia
- [U-Boot] [PATCH v2] BUGFIX: arm: data abort in get_bad_stack_swi
Albert ARIBAUD
- [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command
Albert ARIBAUD
- [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command
Sricharan R
- [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Amarendra Reddy
- [U-Boot] [STATUS] v2013.04-rc2 released
Pfau, Reinhard
- [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command
Albert ARIBAUD
- [U-Boot] [STATUS] v2013.04-rc2 released
Albert ARIBAUD
- [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8
Thomas Weber
- [U-Boot] Require guidance
Albert ARIBAUD
- [U-Boot] [PATCHv2 0/2] Add initial support for AQUILA-CYGNUS
Enric Balletbo i Serra
- [U-Boot] [PATCHv2 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS.
Enric Balletbo i Serra
- [U-Boot] [PATCHv2 2/2] ARM: Add support for IGEP COM AQUILA/CYGNUS
Enric Balletbo i Serra
- [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command
Sricharan R
- [U-Boot] Require guidance
Javier Martinez Canillas
- [U-Boot] [PATCH v2 1/3] exynos: move tzpc_init to armv7/exynos
Inderpal Singh
- [U-Boot] [PATCH v3 0/3] Make tzpc initialization common for exynos4 and exynos5
Inderpal Singh
- [U-Boot] [PATCH v3 1/3] exynos: move tzpc_init to armv7/exynos
Inderpal Singh
- [U-Boot] [PATCH v3 2/3] exynos: update tzpc to make it common for exynos4 and exynos5
Inderpal Singh
- [U-Boot] [PATCH v3 3/3] exynos: Update origen and smdkv310 to use common tzpc_init
Inderpal Singh
- [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8
Andreas Bießmann
- [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
Sricharan R
- [U-Boot] [PATCH V4 5/5] ARM: OMAP4/5: Make bootz as the default boot command
Sricharan R
- [U-Boot] [PATCH v4 4/6] omap_gpmc: change nandecc command
Andreas Bießmann
- [U-Boot] [PATCH v2] BUGFIX: arm: data abort in get_bad_stack_swi
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3] BUGFIX: arm: data abort in get_bad_stack_swi
Tetsuyuki Kobayashi
- [U-Boot] Interrupt handling ARM cortex A9 ( Armv7) in u-boot
s_arm_uboot
- [U-Boot] [PATCH 2/6 V4] Sound: MAX98095: Add the driver for codec
prem s
- [U-Boot] env: fix potential stack overflow in environment functions
Wolfgang Denk
- [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8
Thomas Weber
- [U-Boot] [PATCH v4 4/6] omap_gpmc: change nandecc command
Thomas Weber
- [U-Boot] [PATCH 2/6 V4] Sound: MAX98095: Add the driver for codec
Rajeshwari Birje
- [U-Boot] [PATCH v4 4/6] omap_gpmc: change nandecc command
Andreas Bießmann
- [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8
Andreas Bießmann
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Rini
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Benoît Thébaudeau
- [U-Boot] [PATCH v4 5/6] omap_gpmc: add support for hw assisted BCH8
Andreas Bießmann
- [U-Boot] env: fix potential stack overflow in environment functions
Rob Herring
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Stephen Warren
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Rini
- [U-Boot] env: fix potential stack overflow in environment functions
Wolfgang Denk
- [U-Boot] env: fix potential stack overflow in environment functions
Wolfgang Denk
- [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support
Tom Rini
- [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Tom Rini
- [U-Boot] [PATCH 2/3] omap5_evm.h: Move uEVM-specific choices to omap5_evm.h
Tom Rini
- [U-Boot] [PATCH 3/3] omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE
Tom Rini
- [U-Boot] env: fix potential stack overflow in environment functions
Wolfgang Denk
- [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition
Matt Sealey
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PATCH] Add U_BOOT_TIMESTAMP definition
Wolfgang Denk
- [U-Boot] env: fix potential stack overflow in environment functions
Rob Herring
- [U-Boot] env: fix potential stack overflow in environment functions
Wolfgang Denk
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Benoît Thébaudeau
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Rini
- [U-Boot] env: fix potential stack overflow in environment functions
Rob Herring
- [U-Boot] env: fix potential stack overflow in environment functions
Wolfgang Denk
- [U-Boot] env: fix potential stack overflow in environment functions
Tom Rini
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Rini
- [U-Boot] [PATCH] logo: update to the new logo for ATMEL
Andreas Bießmann
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [PATCH] powerpc/mpc85xx: Clear L1 D-cache lock
York Sun
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Fleming Andy-AFLEMING
- [U-Boot] [PULL] please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Rini
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Scott Wood
- [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND
Scott Wood
- [U-Boot] [v3] command/cache: Add flush command
York Sun
- [U-Boot] [PULL] please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] [v3] command/cache: Add flush command
Tom Rini
- [U-Boot] [v3] command/cache: Add flush command
York Sun
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/mpc85xx: Clear L1 D-cache lock
Wolfgang Denk
- [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code
Naveen Krishna Chatradhi
- [U-Boot] [PATCH 2/2] power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Naveen Krishna Chatradhi
- [U-Boot] [v3] command/cache: Add flush command
York Sun
- [U-Boot] [v2] powerpc/mpc85xx: Clear L1 D-cache lock
York Sun
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Simon Glass
- [U-Boot] env: fix potential stack overflow in environment functions
Scott Wood
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Allen Martin
- [U-Boot] [PATCH 1/3] iomux-v3: Place pad control definitions into common file
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx6: Add solo-lite variant support
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Naveen Krishna Chatradhi
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND
Prabhakar Kushwaha
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Paul B. Henson
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Wolfgang Denk
- [U-Boot] env: fix potential stack overflow in environment functions
Wolfgang Denk
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Dirk Behme
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jagan Teki
- [U-Boot] Handling images(.jpg, .bmp etc) in u-boot
Bhargav AK
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH] spi: mxc_spi: Set master mode for all channels
Fabio Estevam
- [U-Boot] [PATCH] spi: mxc_spi: Set master mode for all channels
Dirk Behme
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Dirk Behme
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Dirk Behme
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Dirk Behme
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Eric Nelson
- [U-Boot] [v3] command/cache: Add flush command
sun york-R58495
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jagan Teki
- [U-Boot] u-boot boot process is broken, how do i recover?
Thomas Petazzoni
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] which u-boot build config to choose for kirkwood?
JPT
- [U-Boot] [PATCH v1] blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
Sonic Zhang
- [U-Boot] [PATCH v1] blackfin: Move blackfin serial driver out of blackfin arch folder.
Sonic Zhang
- [U-Boot] U-Boot under coreboot
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH] Fix wrong >4G filtering
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH] VGA text console support
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH] i386 compiler args are wrong
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] Improper assumption of serial port
Vladimir 'φ-coder/phcoder' Serbinenko
- [U-Boot] [PATCH 0/8] palm treo 680 smartphone board support
Mike Dunn
- [U-Boot] [PATCH 1/8] pxa_lcd: add the ACX544AKN lcd device
Mike Dunn
- [U-Boot] [PATCH 2/8] pxa_lcd: make lcd_enable() a weak pointer
Mike Dunn
- [U-Boot] [PATCH 3/8] pxa_lcd: allow L_BIAS line to be unused
Mike Dunn
- [U-Boot] [PATCH 4/8] pxa27x_udc: remove call to unimplemented set_GPIO_mode()
Mike Dunn
- [U-Boot] [PATCH 5/8] arm: bootm: call udc_disable() before booting linux
Mike Dunn
- [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel
Mike Dunn
- [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash
Mike Dunn
- [U-Boot] [PATCH 8/8] board support for palm treo 680
Mike Dunn
- [U-Boot] [PATCH] VGA text console support
Wolfgang Denk
- [U-Boot] [PATCH] VGA text console support
Wolfgang Denk
- [U-Boot] u-boot boot process is broken, how do i recover?
Albert ARIBAUD
- [U-Boot] [PATCH 2/8] pxa_lcd: make lcd_enable() a weak pointer
Fabio Estevam
- [U-Boot] problem building uboot
JPT
- [U-Boot] problem building uboot
Wolfgang Denk
- [U-Boot] Question about Automatic Updates
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 0/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 1/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 2/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 3/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 4/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 5/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 6/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 7/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH 8/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Tushar Behera
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jaehoon Chung
- [U-Boot] [PATCH v2 1/9] pmic:max77686: add function to set voltage and mode
Rajeshwari Birje
- [U-Boot] [PATCH 3/8] pxa_lcd: allow L_BIAS line to be unused
Marek Vasut
- [U-Boot] [PATCH 5/8] arm: bootm: call udc_disable() before booting linux
Marek Vasut
- [U-Boot] Question about Automatic Updates
Wolfgang Denk
- [U-Boot] [PATCH 0/8] ARM: Add Seagate GoFlexHome support
Wolfgang Denk
- [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
Sricharan R
- [U-Boot] [PATCH v2] OMAP: Fix copy-paste bug that did not enable UART4 clock
Sricharan R
- [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks
Sricharan R
- [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel
Marek Vasut
- [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash
Marek Vasut
- [U-Boot] [PATCH 8/8] board support for palm treo 680
Marek Vasut
- [U-Boot] [PATCH 0/8] ARM: Add Seagate GoFlexHome support
Prafulla Wadaskar
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Lukasz Majewski
- [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel
Wolfgang Denk
- [U-Boot] status i2c uboot driver ST Microelectronics
Mathias LEBLANC
- [U-Boot] [PATCH][Upstream] cmd_sf: include header file common.h before div64.h
Mingkai Hu
- [U-Boot] [PATCH] kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
Gerlando Falauto
- [U-Boot] [PATCH] kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH
Prafulla Wadaskar
- [U-Boot] build succeeded, what now?
JPT
- [U-Boot] how to troubleshoot when u-boot is stuck
JPT
- [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop
Andrew Gabbasov
- [U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
Gabbasov, Andrew
- [U-Boot] offer: program to deal with kirkwood "boot from UART"
JPT
- [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
Lubomir Popov
- [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks
Lubomir Popov
- [U-Boot] OMAP (4) boot_params
Sricharan R
- [U-Boot] [PATCH V3 0/3] OMAP5: I2C: Enable support of I2C4 and I2C5 buses
Lubomir Popov
- [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks
Lubomir Popov
- [U-Boot] [PATCH V3 2/3] OMAP5: I2C: Add I2C4 and I2C5 bases
Lubomir Popov
- [U-Boot] [PATCH V3 3/3] OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
Lubomir Popov
- [U-Boot] [PATCH v2 0/5] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v2 1/5] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] [PATCH v2 2/5] usb: hub: Power-cycle on root-hub ports
Vivek Gautam
- [U-Boot] [PATCH v2 3/5] usb: Update device class in usb device's descriptor
Vivek Gautam
- [U-Boot] [PATCH v2 4/5] usb: hub: Fix enumration timeout
Vivek Gautam
- [U-Boot] [PATCH v2 5/5] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Sricharan R
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks
Tom Rini
- [U-Boot] OMAP (4) boot_params
Michael Cashwell
- [U-Boot] [PATCH] mx28evk: add NAND commands
Eric Bénard
- [U-Boot] [PATCH] mx28evk: add NAND commands
Fabio Estevam
- [U-Boot] [PATCH] mx28evk: add NAND commands
Eric Bénard
- [U-Boot] [PATCH] mx28evk: add NAND commands
Tom Rini
- [U-Boot] [PATCH] mx28evk: add NAND commands
Eric Bénard
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Stefan Roese
- [U-Boot] [PATCH 0/4 v2]: ARM: vexpress: add support for more core tiles
Andre Przywara
- [U-Boot] [PATCH 1/4] ARM: vexpress: refactoring of Versatile Express CA9x4 support
Andre Przywara
- [U-Boot] [PATCH 2/4] ARM: vexpress: create A5 specific board config
Andre Przywara
- [U-Boot] [PATCH 3/4] ARM: vexpress: add support for Versatile Express Cortex-A15-TC2
Andre Przywara
- [U-Boot] [PATCH 4/4] ARM: vexpress: enable bootz and hush parser for all VExpress boards
Andre Przywara
- [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C
Mathias leblanc
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Stefan Roese
- [U-Boot] [PATCH 4/4] ARM: vexpress: enable bootz and hush parser for all VExpress boards
Tom Rini
- [U-Boot] [STATUS] v2013.04-rc2 released
Tom Rini
- [U-Boot] powerpc/lib: fix unsafe register handling in wait_ticks
Tom Rini
- [U-Boot] [U-Boot,v2] common/cmd_test: Avoid macro expansion
Tom Rini
- [U-Boot] [U-Boot, Upstream] cmd_sf: include header file common.h before div64.h
Tom Rini
- [U-Boot] [PATCH 1/2] dfu:ext4:fix: Change ext4write command order of parameters
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH 2/3] omap5_evm.h: Move uEVM-specific choices to omap5_evm.h
Tom Rini
- [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support
Tom Rini
- [U-Boot] [PATCH 6/8] lib: import bitrev library from linux kernel
Mike Dunn
- [U-Boot] Patman / buildman pull request
Tom Rini
- [U-Boot] [PATCH v2] OMAP: Fix copy-paste bug that did not enable UART4 clock
Tom Rini
- [U-Boot] [PATCH 0/3] OMAP5: Improve uEVM support
Tom Rini
- [U-Boot] musb: am335x: disable bulk split-combine feature
Tom Rini
- [U-Boot] musb: set MUSB speed based on CONFIG
Tom Rini
- [U-Boot] [U-Boot, 1/1, v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
Tom Rini
- [U-Boot] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Tom Rini
- [U-Boot] pcm051: Enable DDR PHY dynamic power down bit
Tom Rini
- [U-Boot] am335x: Enable MMC1 clock
Tom Rini
- [U-Boot] [U-Boot, v2] OMAP: Fix copy-paste bug that did not enable UART4 clock
Tom Rini
- [U-Boot] arm: omap4: Fix SDRAM AUTO DETECTION
Tom Rini
- [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support
Tom Rini
- [U-Boot] [PATCH V4 0/5] ARM: OMAP4/5: Add support to boot with device tree as default
Tom Rini
- [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash
Mike Dunn
- [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash
Marek Vasut
- [U-Boot] Question about Automatic Updates
Jagan Teki
- [U-Boot] [v3] command/cache: Add flush command
sun york-R58495
- [U-Boot] [PATCH 2/8] pxa_lcd: make lcd_enable() a weak pointer
Mike Dunn
- [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Tom Rini
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jagan Teki
- [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C
Wolfgang Denk
- [U-Boot] Question about Automatic Updates
Wolfgang Denk
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Fabio Estevam
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Eric Bénard
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [v3] command/cache: Add flush command
Scott Wood
- [U-Boot] offer: program to deal with kirkwood "boot from UART"
Jason Cooper
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] "No status update" errors in OMAP mmc_send_cmd()
Michael Cashwell
- [U-Boot] [v3] command/cache: Add flush command
Scott Wood
- [U-Boot] [v3] command/cache: Add flush command
Scott Wood
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
txcotrader
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Rini
- [U-Boot] [PATCH 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 2/4] da850evm, da840_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] offer: program to deal with kirkwood "boot from UART"
Tom Rini
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Joe Hershberger
- [U-Boot] [PATCH v3 1/7] ubi: Fix broken cleanup code in attach_by_scanning
Joe Hershberger
- [U-Boot] [PATCH v3 2/7] ubi: Expose a few simple functions from the cmd_ubi
Joe Hershberger
- [U-Boot] [PATCH v3 3/7] ubi: ubifs: Add documentation for README
Joe Hershberger
- [U-Boot] [PATCH v3 4/7] ubi: ubifs: Turn off verbose prints
Joe Hershberger
- [U-Boot] [PATCH v3 5/7] mtd: Make mtdparts work with pre-reloc env
Joe Hershberger
- [U-Boot] [PATCH v3 6/7] env: Add support for UBI environment
Joe Hershberger
- [U-Boot] [PATCH v3 7/7] env: Add redundant env support to UBI env
Joe Hershberger
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Tom Rini
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Benoît Thébaudeau
- [U-Boot] Patman / buildman pull request
Simon Glass
- [U-Boot] [STATUS] v2013.04-rc2 released
Simon Glass
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Scott Wood
- [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND
Scott Wood
- [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash
Scott Wood
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND
Prabhakar Kushwaha
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH v2] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
Sricharan R
- [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy
Hung-ying Tyan
- [U-Boot] [PATCH v2] OMAP5: I2C: Enable i2c5 clocks
Sricharan R
- [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks
Sricharan R
- [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks
Lubomir Popov
- [U-Boot] [PATCH V3 1/3] OMAP5: I2C: Enable i2c5 clocks
Sricharan R
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Heiko Schocher
- [U-Boot] offer: program to deal with kirkwood "boot from UART"
Prafulla Wadaskar
- [U-Boot] [PATCH V4 0/3] OMAP5: I2C: Enable support of I2C4 and I2C5 buses
Lubomir Popov
- [U-Boot] [PATCH V4 1/3] OMAP5: I2C: Enable i2c5 clocks
Lubomir Popov
- [U-Boot] [PATCH V4 2/3] OMAP5: I2C: Add I2C4 and I2C5 bases
Lubomir Popov
- [U-Boot] [PATCH V4 3/3] OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5
Lubomir Popov
- [U-Boot] [PATCH] OMAP4: Fix bug in omap4460_volts struct
Lubomir Popov
- [U-Boot] [PATCH] Exynos5: i2c: Fix read NACK handling and remove some redundancy
Akshay Saraswat
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jagan Teki
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jaehoon Chung
- [U-Boot] [PATCH 0/5] FSL SECURE BOOT: Add support for next level image validation
Gupta Ruchika-R66431
- [U-Boot] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jagan Teki
- [U-Boot] [PATCH V8 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Jaehoon Chung
- [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Jaehoon Chung
- [U-Boot] [PATCH V8 5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
Jaehoon Chung
- [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Minkyu Kang
- [U-Boot] [PATCH V8 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Amarendra Reddy
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Heiko Schocher
- [U-Boot] [PATCH v3 0/4] ARM: vexpress: add support for more core tiles
Andre Przywara
- [U-Boot] [PATCH v3 1/4] ARM: vexpress: refactoring of Versatile Express CA9x4 support
Andre Przywara
- [U-Boot] [PATCH v3 2/4] ARM: vexpress: create A5 specific board config
Andre Przywara
- [U-Boot] [PATCH v3 3/4] ARM: vexpress: add support for Versatile Express Cortex-A15-TC2
Andre Przywara
- [U-Boot] [PATCH v3 4/4] ARM: vexpress: enable bootz and hush parser for all VExpress boards
Andre Przywara
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Fabio Estevam
- [U-Boot] [PATCH V8 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
Amarendra Reddy
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Fabio Estevam
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Heiko Schocher
- [U-Boot] [U-Boot, 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- No subject
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Benoît Thébaudeau
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Peter Korsgaard
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [Patch v2] cmd/gpt: Support gpt command for all devices
Egbert Eich
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [Patch v2] cmd/gpt: Support gpt command for all devices
Tom Rini
- [U-Boot] [PATCH 7/8] mtd: nand: add driver for diskonchip g4 nand flash
Mike Dunn
- [U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC
Tom Rini
- [U-Boot] [PATCH] am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
Tom Rini
- [U-Boot] [Patch v2] disk/part_dos: check harder for partition table
Egbert Eich
- [U-Boot] PPC4XX Custom Board - Failing to read I2C
Stefan Roese
- [U-Boot] [Patch v2] disk/gpt: Fix GPT partition handling for blocksize != 512
Egbert Eich
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Fabio Estevam
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH 3/8] pxa_lcd: allow L_BIAS line to be unused
Mike Dunn
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Otavio Salvador
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Fabio Estevam
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Fabio Estevam
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH 1/3] iomux-v3: Place pad control definitions into common file
Otavio Salvador
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
Fabio Estevam
- [U-Boot] [PATCH v2 1/3] iomux-v3: Place pad control definitions into common file
Fabio Estevam
- [U-Boot] [PATCH v2 2/3] mx6: Add solo-lite variant support
Fabio Estevam
- [U-Boot] [PATCH v2 3/3] mx6sl: Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH] mx31pdk: Remove watchdog support
Fabio Estevam
- [U-Boot] zmodem ?
Brad Walker
- [U-Boot] [PATCH v2 1/3] iomux-v3: Place pad control definitions into common file
Otavio Salvador
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Eric Bénard
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Benoît Thébaudeau
- [U-Boot] [PATCH v11 02/30] mtd: nand: mxc_nand: Fix is_16bit_nand()
Benoît Thébaudeau
- [U-Boot] [PATCH v11 03/30] nand: mxc: Prepare to add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v11 04/30] nand: mxc: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v11 05/30] imx: mx5: lowlevel_init: Simplify code
Benoît Thébaudeau
- [U-Boot] [PATCH v11 06/30] imx: mx53ard: Add support for NAND Flash
Benoît Thébaudeau
- [U-Boot] [PATCH v11 07/30] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
Benoît Thébaudeau
- [U-Boot] [PATCH v11 08/30] nand: mxc: Use appropriate page number in syndrome functions
Benoît Thébaudeau
- [U-Boot] [PATCH v11 09/30] arm: start.S: Fix _TEXT_BASE for SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v11 10/30] arm: relocate_code() is no longer noreturn
Benoît Thébaudeau
- [U-Boot] [PATCH v11 11/30] arm1136: Remove redundant relocate_code() return
Benoît Thébaudeau
- [U-Boot] [PATCH v11 12/30] arm: relocate_code(): Remove useless relocation offset computation
Benoît Thébaudeau
- [U-Boot] [PATCH v11 13/30] arm: relocate_code(): Use __image_copy_end for end of relocation
Benoît Thébaudeau
- [U-Boot] [PATCH v11 14/30] arm: crt0.S: Remove bogus .globl
Benoît Thébaudeau
- [U-Boot] [PATCH v11 15/30] autoconfig.mk: Make it possible to define configs from other configs
Benoît Thébaudeau
- [U-Boot] [PATCH v11 16/30] Makefile: Change CONFIG_SPL_PAD_TO to image offset
Benoît Thébaudeau
- [U-Boot] [PATCH v11 17/30] imx: Fix automatic make targets for imx images
Benoît Thébaudeau
- [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v11 19/30] arm926ejs: Remove deprecated and now unused NAND SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v11 20/30] arm: Remove unused relocate_code() parameters
Benoît Thébaudeau
- [U-Boot] [PATCH v11 21/30] Makefile: Move SHELL setup to config.mk
Benoît Thébaudeau
- [U-Boot] [PATCH v11 22/30] .gitignore: Add /SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v11 23/30] imx: Add u-boot-with-spl.imx make target
Benoît Thébaudeau
- [U-Boot] [PATCH v11 24/30] imx: Add u-boot-with-nand-spl.imx make target
Benoît Thébaudeau
- [U-Boot] [PATCH v11 25/30] arm: Remove support for smdk6400
Benoît Thébaudeau
- [U-Boot] [PATCH v11 26/30] Revert "mkconfig: start deprecating Makefile config targets"
Benoît Thébaudeau
- [U-Boot] [PATCH v11 27/30] arm: Remove support for unused s3c64xx
Benoît Thébaudeau
- [U-Boot] [PATCH v11 28/30] arm: Remove deprecated and now unused NAND SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v11 29/30] arm1176: Remove unused MMU setup from start.S
Benoît Thébaudeau
- [U-Boot] [PATCH v11 30/30] arm: Make all linker scripts compatible with per-symbol sections
Benoît Thébaudeau
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Benoît Thébaudeau
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Fabio Estevam
- [U-Boot] Patman / buildman pull request
Tom Rini
- [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL
Albert ARIBAUD
- [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v11 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH] mx35 iomux: correct offset of IOMUXSW_INPUT_CTL register
Philip Paeps
- [U-Boot] [PATCH 0/5] omap5912-osk: Fix u-boot support for board
Jon Hunter
- [U-Boot] [PATCH 1/5] omap5912-osk: Fix DRAM initialisation
Jon Hunter
- [U-Boot] [PATCH 2/5] omap5912-osk: Fix booting from NOR flash
Jon Hunter
- [U-Boot] [PATCH 3/5] omap5912-osk: Fix device initialisation
Jon Hunter
- [U-Boot] [PATCH 4/5] omap5912-osk: Increase flash partition for u-boot
Jon Hunter
- [U-Boot] [PATCH 5/5] omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ
Jon Hunter
- [U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND
Scott Wood
- [U-Boot] bootm does not work if netconsole is enabled
Michael Walle
- [U-Boot] [PATCH v2] mx35 iomux: correct offsets of IOMUX registers
Philip Paeps
- [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels
Fabio Estevam
- [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v2 2/4] da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v2 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Scott Wood
- [U-Boot] [PATCH] Do not call board_early_init_f() twice
Vadim Bendebury
- [U-Boot] [v3] command/cache: Add flush command
Scott Wood
- [U-Boot] bootm does not work if netconsole is enabled
Joe Hershberger
- [U-Boot] [PATCH v2 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
Minkyu Kang
- [U-Boot] which version of uboot support ARM A7
Li, Hai
- [U-Boot] DWMMC / DWMCI question
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Stefano Babic
- [U-Boot] zmodem ?
Stefano Babic
- [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels
Stefano Babic
- [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amarendra Reddy
- [U-Boot] [PATCH] mx31pdk: Remove watchdog support
Stefano Babic
- [U-Boot] [PATCH v2] mx35 iomux: correct offsets of IOMUX registers
Stefano Babic
- [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support
Stefan Roese
- [U-Boot] [PATCH 1/4] imx: Move some header files from arch-mxs to imx-common
Stefan Roese
- [U-Boot] [PATCH 2/4] imx: Move some i.MX common functions into the imx-common directory
Stefan Roese
- [U-Boot] [PATCH 3/4] dma: Add i.MX6 support to drivers/dma/apbh_dma.c
Stefan Roese
- [U-Boot] [PATCH 4/4] mtd: mxs_nand: Add support for i.MX6
Stefan Roese
- [U-Boot] [PATCH v2 0/4] Add Support for Storage Devices with Blocksizes != 512
Egbert Eich
- [U-Boot] [PATCH v2 1/4] disk/iso: Add Support for block sizes > 512 byte to ISO partition support
Egbert Eich
- [U-Boot] [PATCH v2 2/4] fs/fat: Don't multiply fatsize with sector size
Egbert Eich
- [U-Boot] [PATCH v2 3/4] part/dev_desc: Add log2 of blocksize to block_dev_desc data struct
Egbert Eich
- [U-Boot] [PATCH v2 4/4] fs/ext4: Support device block sizes != 512 bytes
Egbert Eich
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Heiko Schocher
- [U-Boot] [PATCH v2 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Heiko Schocher
- [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support
Marek Vasut
- [U-Boot] [PATCH] phylib: Add Atheros AR8035 GETH PHY support
Xie Xiaobo
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Albert ARIBAUD
- [U-Boot] [PATCH 6/6] RFC: am335x: enable falcon boot mode for mmc (raw and fat)
Peter Korsgaard
- [U-Boot] bootm does not work if netconsole is enabled
Michael Walle
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] DWMMC / DWMCI question
Wolfgang Denk
- [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels
Fabio Estevam
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Wolfgang Denk
- [U-Boot] [PATCH 0/4] Enable 'ums' command on Trats2 board.
Piotr Wilczek
- [U-Boot] [PATCH 1/4] driver:usb:s3c_udc: add support for Exynos4x12
Piotr Wilczek
- [U-Boot] [PATCH 2/4] usb:composite: use memcpy to avoid unaligned access
Piotr Wilczek
- [U-Boot] [PATCH 3/4] pmic: max77693: add defines for safeout 1 and 2
Piotr Wilczek
- [U-Boot] [PATCH 4/4] trats2: enable ums support on Trats2
Piotr Wilczek
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Wolfgang Denk
- [U-Boot] [U-Boot, v6, 4/9] nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters
Tom Rini
- [U-Boot] [PATCH v2 0/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH v2 1/8] ARM: Add maintainer for the Seagate GoFlexHome
Suriyan Ramasami
- [U-Boot] [PATCH v2 2/8] ARM: Add a board entry for the Seagate GoFlexHome
Suriyan Ramasami
- [U-Boot] [PATCH v2 3/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH v2 4/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH v2 5/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH v2 6/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH v2 7/8] ARM: Add Seagate GoFlexHome support
Suriyan Ramasami
- [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot
Suriyan Ramasami
- [U-Boot] [PATCH v2 0/8] ARM: Add Seagate GoFlexHome support
Albert ARIBAUD
- [U-Boot] [Patch v2] cmd/gpt: Support gpt command for all devices
Piotr Wilczek
- [U-Boot] [PATCH v2 0/8] ARM: Add Seagate GoFlexHome support
Wolfgang Denk
- [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Michael Cashwell
- [U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
Tom Rini
- [U-Boot] [PATCH] am335x: Update timings for the beaglebone again
Tom Rini
- [U-Boot] bootm does not work if netconsole is enabled
Joe Hershberger
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v2] Tegra: Split tegra_get_chip_type() into soc & sku funcs
Tom Warren
- [U-Boot] [PATCH v2] Tegra: Split tegra_get_chip_type() into soc & sku funcs
Stephen Warren
- [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file
festevam at gmail.com
- [U-Boot] [PATCH v3 2/3] mx6: Add solo-lite variant support
festevam at gmail.com
- [U-Boot] [PATCH v2 3/3] mx6sl: Add initial support for mx6slevk board
festevam at gmail.com
- [U-Boot] [v3] command/cache: Add flush command
Scott Wood
- [U-Boot] [PATCH] omap5_uevm: Correct to 2MiB aligned partitions on eMMC
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH 0/4] omap2420-h4: Fix u-boot support for board
Tom Rini
- [U-Boot] [PATCH] OMAP4: Fix bug in omap4460_volts struct
Tom Rini
- [U-Boot] [PATCH] am335x/ti814x: Correct MMC_BOOT_DEVICES_START/END
Tom Rini
- [U-Boot] [PATCH] omap5_uevm: Correct to 2MiB aligned partitions on eMMC
Tom Rini
- [U-Boot] [PATCH 1/5][v2] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Scott Wood
- [U-Boot] [PATCH] am335x: Update timings for the beaglebone again
Tom Rini
- [U-Boot] [PATCH 1/1] powerpc/lib: fix unsafe register handling in wait_ticks
Tom Rini
- [U-Boot] [PATCH 4/4] mtd: mxs_nand: Add support for i.MX6
Scott Wood
- [U-Boot] [PATCH] env_mmc: add support for redundant environment
Michael Heimpold
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Albert ARIBAUD
- [U-Boot] bootm does not work if netconsole is enabled
Michael Walle
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] [v3] command/cache: Add flush command
Scott Wood
- [U-Boot] [PATCH] mx31pdk: Remove watchdog support
Albert ARIBAUD
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Benoît Thébaudeau
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Fabio Estevam
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Albert ARIBAUD
- [U-Boot] [ARM] rolling u-boot-arm back then forward
Albert ARIBAUD
- [U-Boot] [PATCH v1 1/1] omap3: Display MHz instead of mHz on the console
Manfred Huber
- [U-Boot] [PATCH v11 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Albert ARIBAUD
- [U-Boot] [ARM] rolling u-boot-arm back then forward - done
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Stephen Warren
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] [v3] command/cache: Add flush command
Scott Wood
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Stephen Warren
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Stephen Warren
- [U-Boot] Pull request: u-boot-arm/master
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/1] ARM: Add support for Seagate GoFlexHome
Suriyan Ramasami
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Paul B. Henson
- [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support
Mike Dunn
- [U-Boot] [PATCH v2 1/7] pxa_lcd: add the ACX544AKN lcd device
Mike Dunn
- [U-Boot] [PATCH v2 2/7] pxa_lcd: make lcd_enable() a weak pointer
Mike Dunn
- [U-Boot] [PATCH v2 3/7] pxa27x_udc: remove call to unimplemented set_GPIO_mode()
Mike Dunn
- [U-Boot] [PATCH v2 4/7] arm: bootm: call udc_disable()before booting linux
Mike Dunn
- [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel
Mike Dunn
- [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash
Mike Dunn
- [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board
Mike Dunn
- [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot
Rob Herring
- [U-Boot] DWMMC / DWMCI question
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH] mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments
Otavio Salvador
- [U-Boot] [PATCH] mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments
Fabio Estevam
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Fabio Estevam
- [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot
Suriyan Ramasami
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/1] ARM: Add support for Seagate GoFlexHome
Albert ARIBAUD
- [U-Boot] [U-Boot, v6, 4/9] nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters
Igor Grinberg
- [U-Boot] Pull request: u-boot-arm/master - UPDATED
Albert ARIBAUD
- [U-Boot] [v3] new SPL support for IFC based Feescale platforms
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/5][v3] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND
Prabhakar Kushwaha
- [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH 4/5][v3] board/bsc9131rdb:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH 5/5][v3] board/bsc9132qds:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH v3 1/1] ARM: Add support for Seagate GoFlexHome
Wolfgang Denk
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH v2] blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
Sonic Zhang
- [U-Boot] [STATUS] v2013.04-rc2 released
Holger Brunck
- [U-Boot] [PATCH v2] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH] arm: imx: Change iomux functions to void type
Stefan Roese
- [U-Boot] [STATUS] v2013.04-rc2 released
Albert ARIBAUD
- [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support
Stefan Roese
- [U-Boot] [PATCH] arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h
Stefan Roese
- [U-Boot] [PATCH v3] blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
Sonic Zhang
- [U-Boot] [PATCH v3] BUGFIX: arm: data abort in get_bad_stack_swi
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v1] blackfin: Add comments for watchdog event initialization.
Sonic Zhang
- [U-Boot] Build failure on am335x_evm
Mark Jackson
- [U-Boot] [PATCH v3] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
Lubomir Popov
- [U-Boot] [PATCH] powerpc/85xx: Add TWR-P10xx board support
Xie Xiaobo
- [U-Boot] [PATCH] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Reinhard Pfau
- [U-Boot] [v3] command/cache: Add flush command
Wolfgang Denk
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] [U-Boot, v6, 4/9] nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters
Tom Rini
- [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot
Mike Dunn
- [U-Boot] Build failure on am335x_evm
Tom Rini
- [U-Boot] Build failure on am335x_evm
Mark Jackson
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH] omap5_common: Add optargs variable for kernel command line args
Tom Rini
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [PATCH V2] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Fabio Estevam
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Stephen Warren
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Tom Rini
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Stephen Warren
- [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...
Albert ARIBAUD
- [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...
Benoît Thébaudeau
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Albert ARIBAUD
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...
Albert ARIBAUD
- [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...
Tom Rini
- [U-Boot] [PATCH v2 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Fabio Estevam
- [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches...
Tom Rini
- [U-Boot] [PATCH v4 1/1] ARM: Add Seagate GoFlex Home support
Suriyan Ramasami
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Warren
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Tom Warren
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Albert ARIBAUD
- [U-Boot] [PATCH] omap5_common.h: Switch to ext4
Tom Rini
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Tom Warren
- [U-Boot] [PATCH] ARM: Fix __bss_start and __bss_end in linker scripts
Tom Warren
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Albert ARIBAUD
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Paul B. Henson
- [U-Boot] [PATCH] arm: imx: Change iomux functions to void type
Marek Vasut
- [U-Boot] Pull request: u-boot-arm/master - UPDATED
Tom Rini
- [U-Boot] recommended method of netbooting kernel/dtb in u-boot?
Chris Friesen
- [U-Boot] [PATCH v2 1/7] pxa_lcd: add the ACX544AKN lcd device
Marek Vasut
- [U-Boot] [PATCH v2 2/7] pxa_lcd: make lcd_enable() a weak pointer
Marek Vasut
- [U-Boot] [PATCH v2 3/7] pxa27x_udc: remove call to unimplemented set_GPIO_mode()
Marek Vasut
- [U-Boot] [PATCH v2 4/7] arm: bootm: call udc_disable()before booting linux
Marek Vasut
- [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel
Marek Vasut
- [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash
Marek Vasut
- [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board
Marek Vasut
- [U-Boot] [PATCH] integrator: enable device tree
Linus Walleij
- [U-Boot] [PATCH v12 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Benoît Thébaudeau
- [U-Boot] [PATCH v12 02/30] mtd: nand: mxc_nand: Fix is_16bit_nand()
Benoît Thébaudeau
- [U-Boot] [PATCH v12 03/30] nand: mxc: Prepare to add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v12 04/30] nand: mxc: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v12 05/30] imx: mx5: lowlevel_init: Simplify code
Benoît Thébaudeau
- [U-Boot] [PATCH v12 06/30] imx: mx53ard: Add support for NAND Flash
Benoît Thébaudeau
- [U-Boot] [PATCH v12 07/30] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
Benoît Thébaudeau
- [U-Boot] [PATCH v12 08/30] nand: mxc: Use appropriate page number in syndrome functions
Benoît Thébaudeau
- [U-Boot] [PATCH v12 09/30] arm: start.S: Fix _TEXT_BASE for SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v12 10/30] arm: relocate_code() is no longer noreturn
Benoît Thébaudeau
- [U-Boot] [PATCH v12 11/30] arm1136: Remove redundant relocate_code() return
Benoît Thébaudeau
- [U-Boot] [PATCH v12 12/30] arm: relocate_code(): Remove useless relocation offset computation
Benoît Thébaudeau
- [U-Boot] [PATCH v12 13/30] arm: relocate_code(): Use __image_copy_end for end of relocation
Benoît Thébaudeau
- [U-Boot] [PATCH v12 14/30] arm: crt0.S: Remove bogus .globl
Benoît Thébaudeau
- [U-Boot] [PATCH v12 15/30] autoconfig.mk: Make it possible to define configs from other configs
Benoît Thébaudeau
- [U-Boot] [PATCH v12 16/30] Makefile: Change CONFIG_SPL_PAD_TO to image offset
Benoît Thébaudeau
- [U-Boot] [PATCH v12 17/30] imx: Fix automatic make targets for imx images
Benoît Thébaudeau
- [U-Boot] [PATCH v12 18/30] nand: mxc: Switch NAND SPL to generic SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v12 19/30] arm926ejs: Remove deprecated and now unused NAND SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v12 20/30] arm: Remove unused relocate_code() parameters
Benoît Thébaudeau
- [U-Boot] [PATCH v12 21/30] Makefile: Move SHELL setup to config.mk
Benoît Thébaudeau
- [U-Boot] [PATCH v12 22/30] .gitignore: Add /SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v12 23/30] imx: Add u-boot-with-spl.imx make target
Benoît Thébaudeau
- [U-Boot] [PATCH v12 24/30] imx: Add u-boot-with-nand-spl.imx make target
Benoît Thébaudeau
- [U-Boot] [PATCH v12 25/30] arm: Remove support for smdk6400
Benoît Thébaudeau
- [U-Boot] [PATCH v12 26/30] Revert "mkconfig: start deprecating Makefile config targets"
Benoît Thébaudeau
- [U-Boot] [PATCH v12 27/30] arm: Remove support for unused s3c64xx
Benoît Thébaudeau
- [U-Boot] [PATCH v12 28/30] arm: Remove deprecated and now unused NAND SPL
Benoît Thébaudeau
- [U-Boot] [PATCH v12 29/30] arm1176: Remove unused MMU setup from start.S
Benoît Thébaudeau
- [U-Boot] [PATCH v12 30/30] arm: Make all linker scripts compatible with per-symbol sections
Benoît Thébaudeau
- [U-Boot] [PATCH v12 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Benoît Thébaudeau
- [U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND
Scott Wood
- [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format
Scott Wood
- [U-Boot] [PATCH] Do not call board_early_init_f() twice
Tom Rini
- [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot
Suriyan Ramasami
- [U-Boot] [PATCH] powerpc/85xx: Add TWR-P10xx board support
Scott Wood
- [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash
Scott Wood
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Tom Rini
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] [PATCH 2/5][v3] powerpc/mpc85xx: new SPL support for IFC NAND
Prabhakar Kushwaha
- [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH v12 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
Albert ARIBAUD
- [U-Boot] [STATUS] v2013.04-rc2 released
Prafulla Wadaskar
- [U-Boot] [ARM] Rollback *again* -- 5 patches
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Stefan Roese
- [U-Boot] [STATUS] v2013.04-rc2 released
Albert ARIBAUD
- [U-Boot] [STATUS] v2013.04-rc2 released
Prafulla Wadaskar
- [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support
Alison Wang
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
Alison Wang
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
Alison Wang
- [U-Boot] [PATCH 3/5] vybrid: add uart driver support
Alison Wang
- [U-Boot] [PATCH 4/5] vybrid: add eSDHC driver support
Alison Wang
- [U-Boot] [PATCH 5/5] vybrid: add ethernet driver support
Alison Wang
- [U-Boot] [STATUS] v2013.04-rc2 released
Albert ARIBAUD
- [U-Boot] [PATCH] powpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t
Mingkai Hu
- [U-Boot] [PATCH] powerpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t
Mingkai Hu
- [U-Boot] [PATCH] net: nfs: add dynamic wait period
Enric Balletbo Serra
- [U-Boot] [ARM] Rollback *again* -- 5 patches PLUS 31 patches... -- FIXED
Albert ARIBAUD
- [U-Boot] [PATCH] powpc/mpc85xx: explicit cast the SDRAM size to type phys_size_t
Hu Mingkai-B21284
- [U-Boot] Please pull u-boot-cfi-flash/master
Wolfgang Denk
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Mark Jackson
- [U-Boot] CONFIG option for second ethernet phy
Michal Simek
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Mark Jackson
- [U-Boot] [PATCH v2 0/5] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 1/8] usb: common: Weed out USB_**_PRINTFs from usb framework
Vivek Gautam
- [U-Boot] [PATCH v3 2/8] USB: Some cleanup prior to USB 3.0 interface addition
Vivek Gautam
- [U-Boot] [PATCH v3 3/8] usb: hub: Power-cycle on root-hub ports
Vivek Gautam
- [U-Boot] [PATCH v3 4/8] usb: Update device class in usb device's descriptor
Vivek Gautam
- [U-Boot] [PATCH v3 5/8] usb: hub: Fix enumration timeout
Vivek Gautam
- [U-Boot] [PATCH v3 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [PATCH v3 7/8] usb: hub: Reset only usb 2.0 ports
Vivek Gautam
- [U-Boot] [PATCH v3 8/8] usb: common: Use a global macro for 'min3'
Vivek Gautam
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
Fabio Estevam
- [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Jaehoon Chung
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Tom Rini
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
Fabio Estevam
- [U-Boot] [PATCH 3/5] vybrid: add uart driver support
Fabio Estevam
- [U-Boot] [PATCH 5/5] vybrid: add ethernet driver support
Fabio Estevam
- [U-Boot] [PATCH v3 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel
Mike Dunn
- [U-Boot] [PATCH v3 1/4] cam_enc_4xx: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v3 2/4] da850evm, da850_am18xxevm: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v3 3/4] smdk5250, snow: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/3] Add TI816X EVM support
TENART Antoine
- [U-Boot] [PATCH v3 1/3] Prepare for TI816X : reuse existing code from TI814X
TENART Antoine
- [U-Boot] [PATCH v3 2/3] Add TI816X support
TENART Antoine
- [U-Boot] [PATCH v3 3/3] Add TI816X evm board support
TENART Antoine
- [U-Boot] offer: program to deal with kirkwood "boot from UART"
JPT
- [U-Boot] [PATCH v3 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Tom Rini
- [U-Boot] fatwrite problem
Ruud Commandeur
- [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board
Mike Dunn
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Joe Hershberger
- [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash
Mike Dunn
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] [PATCH] net: nfs: add dynamic wait period
Joe Hershberger
- [U-Boot] [PATCH v2 8/8] ARM: Present a menu of bootable options on boot
Tom Rini
- [U-Boot] fatwrite problem
Mats Kärrman
- [U-Boot] [PATCH] net: nfs: add dynamic wait period
Enric Balletbo Serra
- [U-Boot] [PATCH v3 0/7] Add support for using an UBI volume for environment
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] fatwrite problem
Ruud Commandeur
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] fatwrite problem
Tom Rini
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v4 2/4] cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT
Albert ARIBAUD
- [U-Boot] [PATCH v4 3/4] da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT
Albert ARIBAUD
- [U-Boot] [PATCH v4 4/4] smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT
Albert ARIBAUD
- [U-Boot] [PATCH v3 2/3] Add TI816X support
Andrew Dyer
- [U-Boot] fatwrite problem
Ruud Commandeur
- [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Tom Rini
- [U-Boot] fatwrite problem
Tom Rini
- [U-Boot] [PATCH 3/5][v3] board/p1010rdb:Add NAND boot support using new SPL format
Scott Wood
- [U-Boot] [PATCH v3 3/3] Add TI816X evm board support
Andrew Dyer
- [U-Boot] [PATCH v3 3/3] Add TI816X evm board support
TENART Antoine
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Tom Rini
- [U-Boot] [PATCH v3 2/3] Add TI816X support
TENART Antoine
- [U-Boot] [PATCH v4 1/4] ARM: fix CONFIG_SPL_MAX_SIZE semantics
Albert ARIBAUD
- [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash
Scott Wood
- [U-Boot] [PATCH V2] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] [PATCH v2 7/7] add support for palm treo 680 board
Marek Vasut
- [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash
Marek Vasut
- [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel
Marek Vasut
- [U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash
Scott Wood
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH] am335x: Really correct DDR timings on new BeagleBone part
Tom Rini
- [U-Boot] [PATCH v3 0/8] palm treo 680 smartphone board support
Mike Dunn
- [U-Boot] [PATCH v3 1/8] pxa_lcd: add the ACX544AKN lcd device
Mike Dunn
- [U-Boot] [PATCH v3 2/8] pxa_lcd: make lcd_enable() a weak pointer
Mike Dunn
- [U-Boot] [PATCH v3 3/8] pxa27x_udc: remove call to unimplemented set_GPIO_mode()
Mike Dunn
- [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux
Mike Dunn
- [U-Boot] [PATCH 5/8] lib: import bitrev library from the linux kernel
Mike Dunn
- [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash
Mike Dunn
- [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board
Mike Dunn
- [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Mark Jackson
- [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash
Scott Wood
- [U-Boot] fatwrite problem
Benoît Thébaudeau
- [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot
Simon Glass
- [U-Boot] [PATCH] integrator: enable device tree
Albert ARIBAUD
- [U-Boot] fatwrite problem
Tom Rini
- [U-Boot] [PATCH v2 1/3] tpm: Add casts for proper compilation
Simon Glass
- [U-Boot] [PATCH v2 2/3] tpm: Add Infineon slb9635_i2c TPM driver
Simon Glass
- [U-Boot] [PATCH v2 3/3] exynos: Enable I2C TPM for smdk5250
Simon Glass
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH 1/5] tpm: Rename generic_lpc_tpm to tpm_tis_lpc
Simon Glass
- [U-Boot] [PATCH 2/5] x86: config: Reflect the name changes of LPC TPM configs
Simon Glass
- [U-Boot] [PATCH 3/5] tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C)
Simon Glass
- [U-Boot] [PATCH 4/5] tpm: Reorganize the I2C TPM driver
Simon Glass
- [U-Boot] [PATCH 5/5] exynos: config: Reflect the name changes of I2C TPM configs
Simon Glass
- [U-Boot] fatwrite problem
Benoît Thébaudeau
- [U-Boot] Pending TPM patches for release
Simon Glass
- [U-Boot] [PATCH] Tegra: T30: Beaver board support.
Tom Warren
- [U-Boot] [PATCH v2] Tegra: T30: Beaver board support.
Tom Warren
- [U-Boot] [PATCH] Tegra: T30: Beaver board support.
Tom Rini
- [U-Boot] [PATCH] Tegra: T30: Beaver board support.
Stephen Warren
- [U-Boot] [PATCH] Tegra: T30: Beaver board support.
Tom Warren
- [U-Boot] [PATCH] Tegra: T30: Beaver board support.
Tom Rini
- [U-Boot] Transplant u-boot to Atheros AR9344
Rynn Chan
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Naveen Krishna Ch
- [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code
Naveen Krishna Ch
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
wang alison
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
wang alison
- [U-Boot] [PATCH 3/5] vybrid: add uart driver support
wang alison
- [U-Boot] [PATCH 5/5] vybrid: add ethernet driver support
wang alison
- [U-Boot] [PATCH v3] BUGFIX: arm: data abort in get_bad_stack_swi
Albert ARIBAUD
- [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode
Simon Glass
- [U-Boot] [PATCH 1/2] exynos: Correct use of 64-bit division
Simon Glass
- [U-Boot] [PATCH 2/2] exynos: fdt: Add TMU node for snow
Simon Glass
- [U-Boot] [PATCH] Provide more useful debugging when an initcall fails
Simon Glass
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Marek Vasut
- [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash
Marek Vasut
- [U-Boot] [PATCH] mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments
Stefano Babic
- [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels
Stefano Babic
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] How do I use AM335x eth1 rather than eth0 ? [SOLVED]
Mark Jackson
- [U-Boot] How do I use AM335x eth1 rather than eth0 ? [SOLVED]
Mark Jackson
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
Fabio Estevam
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Marek Vasut
- [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support
Stefano Babic
- [U-Boot] [PATCH v2 5/7] lib: import bitrev library from the linux kernel
Wolfgang Denk
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
Stefano Babic
- [U-Boot] [PATCH 3/5] vybrid: add uart driver support
Stefano Babic
- [U-Boot] [PATCH 4/5] vybrid: add eSDHC driver support
Stefano Babic
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
Stefano Babic
- [U-Boot] [PATCH] arm: imx: Change iomux functions to void type
Stefano Babic
- [U-Boot] [PATCH V2] ARM: Fix __bss_start and __bss_end in linker scripts
Albert ARIBAUD
- [U-Boot] [PATCH v2] spi: mxc_spi: Set master mode for all channels
Dirk Behme
- [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop
Dirk Behme
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] Provide more useful debugging when an initcall fails
Wolfgang Denk
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] [Patch] fsl_esdhc: Fix DMA transfer completion waiting loop
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PULL] : Please pull u-boot-imx
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/4] Homogeneize semantics of CONFIG_SPL_MAX_SIZE
Albert ARIBAUD
- [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README
Albert ARIBAUD
- [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README
Benoît Thébaudeau
- [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README
Albert ARIBAUD
- [U-Boot] [PATCH] cosmetic: fix CONFIG_SPL_BSS_MAX_SIZE typo in README
Albert ARIBAUD
- [U-Boot] [PATCH v3 8/8] usb: common: Use a global macro for 'min3'
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
Marek Vasut
- [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux
Marek Vasut
- [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board
Marek Vasut
- [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash
Marek Vasut
- [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK
Wolfgang Denk
- [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support
Mike Dunn
- [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux
Marek Vasut
- [U-Boot] [PATCH v2 0/7] palm treo 680 smartphone board support
Marek Vasut
- [U-Boot] [PATCH 0/4] imx: Add iMX6 NAND support
Marek Vasut
- [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support
Liu Hui-R64343
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
Liu Hui-R64343
- [U-Boot] uboot newbie question on booting ep405 board
David Li
- [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode
Vivek Gautam
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Heiko Schocher
- [U-Boot] uboot newbie question on booting ep405 board
Wolfgang Denk
- [U-Boot] [PATCH] omap5_common: Add optargs variable for kernel command line args
Sricharan R
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Jagan Teki
- [U-Boot] [v4] new SPL support for IFC based Feescale platforms
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/5][v4] powerpc/mpc85xx: new SPL support for IFC NAND
Prabhakar Kushwaha
- [U-Boot] [PATCH 3/5][v4] board/p1010rdb:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH 4/5][v4] board/bsc9131rdb:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH 5/5][v4] board/bsc9132qds:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] uboot_porting_guide
Carmine Garripoli
- [U-Boot] [PATCH] powerpc: CONFIG_OF_CONTROL support
Jonathan Klee
- [U-Boot] [PATCH] powerpc: Add support for CONFIG_OF_CONTROL
Jonathan Klee
- [U-Boot] [PATCH] omap5_common: Add optargs variable for kernel command line args
Tom Rini
- [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux
Tom Rini
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Tom Rini
- [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/8] arm: bootm: call udc_disable() before booting linux
Marek Vasut
- [U-Boot] [PATCH v3 3/3] Add TI816X evm board support
Tom Rini
- [U-Boot] [PATCH 1/3] wandboard: Add card detection for SOM MicroSD card
Otavio Salvador
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH 3/3] wandboard: Add boot selection support
Otavio Salvador
- [U-Boot] dtb vs. kernel command line arguments
Grant Likely
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Fabio Estevam
- [U-Boot] [PATCH] post: fix I2C POST failure for devices in CONFIG_SYS_POST_I2C_IGNORES
Anatolij Gustschin
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Fabio Estevam
- [U-Boot] [PATCH 0/5] ARM: OMAP: Cleanup save_boot_params function
Sricharan R
- [U-Boot] [PATCH 1/5] ARM: OMAP: Make omap_boot_parameters common across socs
Sricharan R
- [U-Boot] [PATCH 2/5] ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
Sricharan R
- [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function
Sricharan R
- [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage
Sricharan R
- [U-Boot] [PATCH 5/5] ARM: OMAP: Add arch_cpu_init function
Sricharan R
- [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function
Tom Rini
- [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function
Sricharan R
- [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage
Tom Rini
- [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage
Sricharan R
- [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] Pending TPM patches for release
Tom Rini
- [U-Boot] [STATUS] v2013.04-rc3 released
Tom Rini
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function
Michael Cashwell
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Fabio Estevam
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH] ARMv7: start.S: stay in HYP mode if u-boot is entered in it
Albert ARIBAUD
- [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board
Mike Dunn
- [U-Boot] [PATCH] exynos: Adjust the starting MIF voltage to 1.05v
Bernie Thompson
- [U-Boot] [PATCH v3 6/8] mtd: nand: add driver for diskonchip g4 nand flash
Scott Wood
- [U-Boot] uboot newbie question on booting ep405 board
David Li
- [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board
Marek Vasut
- [U-Boot] [PATCH v2] Tegra: T30: Beaver board support.
Stephen Warren
- [U-Boot] [PATCH v3 7/8] add support for palm treo 680 board
Mike Dunn
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2] Tegra: T30: Beaver board support.
Tom Warren
- [U-Boot] [PATCH v3] Tegra: T30: Beaver board support.
Tom Warren
- [U-Boot] i.MX3 NAND: trying to understand OOB handling
Philip Paeps
- [U-Boot] [PATCH 1/3] x86: Fix DRAM bank size init with generic board
Simon Glass
- [U-Boot] [PATCH 2/3] x86: Allow setup code to manage its own global data
Simon Glass
- [U-Boot] [PATCH 3/3] x86: config: Init PCI before SPI
Simon Glass
- [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Scott Wood
- [U-Boot] i.MX3 NAND: trying to understand OOB handling
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/3] wandboard: Add card detection for SOM MicroSD card
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] wandboard: Add support for carrier board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH v2 3/3] wandboard: Add boot selection support
Otavio Salvador
- [U-Boot] [PATCH V3 0/3] OMAP5: I2C: Enable support of I2C4 and I2C5 buses
Tom Rini
- [U-Boot] [PATCH v2 0/4] Enable CPSW on TI814x EVM
Tom Rini
- [U-Boot] [PATCH V3 00/10] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups
Tom Rini
- [U-Boot] i.MX3 NAND: trying to understand OOB handling
Philip Paeps
- [U-Boot] [PATCH v3] Tegra: T30: Beaver board support.
Stephen Warren
- [U-Boot] [STATUS] v2013.04-rc3 released
Simon Glass
- [U-Boot] i.MX3 NAND: trying to understand OOB handling
Benoît Thébaudeau
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] [PATCH v3] Tegra: T30: Beaver board support.
Tom Warren
- [U-Boot] [PATCH 3/3] x86: config: Init PCI before SPI
Graeme Russ
- [U-Boot] [PATCH 3/3] x86: config: Init PCI before SPI
Simon Glass
- [U-Boot] [PATCH] Fix wrong >4G filtering
Simon Glass
- [U-Boot] U-Boot under coreboot
Simon Glass
- [U-Boot] [PATCH] i386 compiler args are wrong
Simon Glass
- [U-Boot] Improper assumption of serial port
Simon Glass
- [U-Boot] [PATCH] VGA text console support
Simon Glass
- [U-Boot] [STATUS] v2013.04-rc3 released
Albert ARIBAUD
- [U-Boot] [PATCH 4/5] ARM: OMAP: Cleanup boot parameters usage
Sricharan R
- [U-Boot] [PATCH 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function
Sricharan R
- [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH] powerpc: Add support for CONFIG_OF_CONTROL
Simon Glass
- [U-Boot] [PATCH] Provide more useful debugging when an initcall fails
Simon Glass
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Wolfgang Denk
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Wolfgang Denk
- [U-Boot] [PATCH v3] powerpc/mpc85xx: set clock-frequency for T4/B4 clockgen node
Yuantian.Tang at freescale.com
- [U-Boot] uboot_porting_guide
Albert ARIBAUD
- [U-Boot] [PATCH 4/4 v2] mtd: mxs_nand: Add support for i.MX6
Stefan Roese
- [U-Boot] [PATCH v3] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH v3] imx: Add titanium board support (i.MX6 based)
Stefano Babic
- [U-Boot] [v5] new SPL support for IFC based Feescale platforms
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/5][v5] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/5][v5] powerpc/mpc85xx: new SPL support for IFC NAND
Prabhakar Kushwaha
- [U-Boot] [PATCH 3/5][v5] board/p1010rdb:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH 4/5][v5] board/bsc9131rdb:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH 5/5][v5] board/bsc9132qds:Add NAND boot support using new SPL format
Prabhakar Kushwaha
- [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amarendra Reddy
- [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support
Chunhe Lan
- [PATCH] imx_watchdog: do not soft-reset while watchdog init
Anatolij Gustschin
- [U-Boot] [PATCH] patman: fix gitutil for decorations
Andreas Bießmann
- [U-Boot] fatwrite problem
Ruud Commandeur
- [U-Boot] [PATCH v2] patman: fix gitutil for decorations
Andreas Bießmann
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH] make hang() a weak function
Stefan Roese
- [U-Boot] [PATCH v2] mx35 iomux: correct offsets of IOMUX registers
Stefano Babic
- [U-Boot] [PATCH] mx28evk: add trimffs to nand command
Stefano Babic
- [U-Boot] [PATCH] arm: imx: Change iomux functions to void type
Stefano Babic
- [U-Boot] [PATCH] make hang() a weak function
Graeme Russ
- [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support
Timur Tabi
- [U-Boot] [PATCH] make hang() a weak function
Albert ARIBAUD
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH v3] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH] make hang() a weak function
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support
Tom Rini
- [U-Boot] [PATCH v4] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH] make hang() a weak function
Wolfgang Denk
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH] make hang() a weak function
Graeme Russ
- [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support
Sinan Akman
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH] make hang() a weak function
Wolfgang Denk
- [U-Boot] [PATCH] make hang() a weak function
Graeme Russ
- [U-Boot] [PATCH] make hang() a weak function
Wolfgang Denk
- [U-Boot] Bug in fdt_fixup_fman_firmware
Николай Пузанов
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230
Shawn Guo
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230
Stefano Babic
- [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230
Shawn Guo
- [U-Boot] [PATCH] make hang() a weak function
Wolfgang Denk
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH] Add NanoBone board support
Tom Rini
- [U-Boot] [PATCH v4] add support for the palm treo 680 board
Mike Dunn
- [U-Boot] [PATCH v2] patman: fix gitutil for decorations
Simon Glass
- [U-Boot] Bug in fdt_fixup_fman_firmware
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH] make hang() a weak function
Wolfgang Denk
- [U-Boot] [PATCH] make hang() a weak function
Andreas Bießmann
- [U-Boot] [PATCH 1/5][v4] powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Scott Wood
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] [PATCH v3 8/8] palmtreo680: add utility that writes u-boot to flash
Marek Vasut
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] Please pull u-boot-x86.git
Simon Glass
- [U-Boot] [PATCH] Add NanoBone board support
Tom Rini
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH] Add NanoBone board support
Tom Rini
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] Please pull u-boot-x86.git
Tom Rini
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Stephen Warren
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] [PATCH] Fix wrong >4G filtering
Simon Glass
- [U-Boot] Please pull u-boot-x86.git
Simon Glass
- [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] Please pull u-boot-x86.git
Tom Rini
- [U-Boot] [PATCH] beagleboard: Update comment in get_board_rev()
Tom Rini
- [U-Boot] [PATCH v4 7/7] cros: enable cros-ec for smdk5250
Simon Glass
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Simon Glass
- [U-Boot] [PATCH v2] patman: fix gitutil for decorations
Simon Glass
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Tom Rini
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Simon Glass
- [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support
Scott Wood
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Simon Glass
- [U-Boot] [PATCH] Exynos5: Add support for USB download boot mode
Minkyu Kang
- [U-Boot] [PATCH 1/2] exynos: Correct use of 64-bit division
Minkyu Kang
- [U-Boot] [PATCH 2/2] exynos: fdt: Add TMU node for snow
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [STATUS] v2013.04-rc3 released
Minkyu Kang
- [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot
Jerry Van Baren
- [U-Boot] [PATCH] powerpc/85xx: Add P1023RDB board support
Chunhe Lan
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature
Rajeshwari Birje
- [U-Boot] [PATCH] Add NanoBone board support
Hebbar, Gururaja
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Wolfgang Denk
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Wolfgang Denk
- [U-Boot] pull request for u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: mx6: define CONFIG_ARM_ERRATA_742230
Stefano Babic
- [U-Boot] [PATCH v4] imx: Add titanium board support (i.MX6 based)
Stefano Babic
- [U-Boot] [PATCH 4 (resend)] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Stefano Babic
- [U-Boot] [PATCH v4 0/3] arm: atmel: add at91sam9n12ek board support
Josh Wu
- [U-Boot] [PATCH v4 1/3] spi: atmel_spi: using ip version to check whether has wdrbt
Josh Wu
- [U-Boot] [PATCH v4 2/3] arm: at91: add at91sam9n12 register definition
Josh Wu
- [U-Boot] [PATCH v4 3/3] arm: at91: add at91sam9n12ek board support
Josh Wu
- [U-Boot] [PATCH] USB: ohci-at91: make OHCI work on at91sam9g10 SoC
Bo Shen
- [U-Boot] [PATCH 4 (resend)] imx: Add titanium board support (i.MX6 based)
Wolfgang Denk
- [U-Boot] [U-boot] Help: how to use AES crypto
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 4 (resend)] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] phy ic isn't reset
alex
- [U-Boot] [PATCH v5] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH v2 0/5] consolidate hang()
Andreas Bießmann
- [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c
Andreas Bießmann
- [U-Boot] [PATCH v2 2/5] nios2: fix style in board.c.
Andreas Bießmann
- [U-Boot] [PATCH v2 3/5] mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORT
Andreas Bießmann
- [U-Boot] [PATCH v2 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT
Andreas Bießmann
- [U-Boot] [PATCH v2 5/5] lib: consolidate hang()
Andreas Bießmann
- [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c
Michal Simek
- [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c
Andreas Bießmann
- [U-Boot] [PATCH v2 1/5] microblaze: fix style in board.c
Michal Simek
- [U-Boot] [PATCH v2 5/5] lib: consolidate hang()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Simon Glass
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] [PATCH] mx35 iomux: correct input select register index
Philip Paeps
- [U-Boot] [PATCH] Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver, not cardhu
Tom Warren
- [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference
Tom Warren
- [U-Boot] [PATCH] fdt: Ensure that libfdt_env.h comes from U-Boot
Tom Rini
- [U-Boot] printenv show garbage on out-of-memory conditions
Tom Rini
- [U-Boot] mmc: support the correct card version for eMMC
Tom Rini
- [U-Boot] mmc: check the revision for sd3.0
Tom Rini
- [U-Boot] [PATCH] Tegra: T30: Beaver: Fix board/board_name env vars, s/b beaver, not cardhu
Stephen Warren
- [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference
Stephen Warren
- [U-Boot] [PATCH] USB: ohci-at91: make OHCI work on at91sam9g10 SoC
Marek Vasut
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference
Tom Warren
- [U-Boot] [PATCH] Remove duplicate / unused #defines on AM335x boards
Mark Jackson
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Jagan Teki
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Simon Glass
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Simon Glass
- [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
Fabio Estevam
- [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
Eric Nelson
- [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
Fabio Estevam
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Albert ARIBAUD
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Simon Glass
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Otavio Salvador
- [U-Boot] [PATCH] nitrogen6x: Setup CCM_CCOSR register
Fabio Estevam
- [U-Boot] phy ic isn't reset
Bo Shen
- [U-Boot] PCIe card doesn't work
goldenshore
- [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage
Simon Glass
- [U-Boot] [PATCH 01/19] x86: Remove unused bios/pci code
Simon Glass
- [U-Boot] [PATCH 02/19] x86: Remove unused portion of link script
Simon Glass
- [U-Boot] [PATCH 03/19] x86: Remove legacy board init code
Simon Glass
- [U-Boot] [PATCH 04/19] x86: Declare global_data pointer when it is used
Simon Glass
- [U-Boot] [PATCH 05/19] x86: Implement panic output for coreboot
Simon Glass
- [U-Boot] [PATCH 06/19] x86: Rationalise kernel booting logic and bootstage
Simon Glass
- [U-Boot] [PATCH 07/19] x86: Add TSC timer
Simon Glass
- [U-Boot] [PATCH 08/19] x86: Remove old broken timer implementation
Simon Glass
- [U-Boot] [PATCH 09/19] x86: Remove ISR timer
Simon Glass
- [U-Boot] [PATCH 10/19] x86: Re-enable PCAT timer 2 for beeping
Simon Glass
- [U-Boot] [PATCH 11/19] bootstage: Add stubs for new bootstage functions
Simon Glass
- [U-Boot] [PATCH 12/19] bootstage: Copy bootstage strings post-relocation
Simon Glass
- [U-Boot] [PATCH 13/19] Call bootstage_relocate() after malloc is initted
Simon Glass
- [U-Boot] [PATCH 14/19] x86: Enable bootstage for coreboot
Simon Glass
- [U-Boot] [PATCH 15/19] bootstage: Allow marking a particular line of code
Simon Glass
- [U-Boot] [PATCH 16/19] x86: Fix warning in cmd_ximg.c when CONFIG_GZIP is not defined
Simon Glass
- [U-Boot] [PATCH 17/19] x86: config: Enable LZO for coreboot, remove zlib, gzip
Simon Glass
- [U-Boot] [PATCH 18/19] x86: Support adding coreboot timestanps to bootstage
Simon Glass
- [U-Boot] [PATCH 19/19] x86: Add coreboot timestamps
Simon Glass
- [U-Boot] [U-boot] Help: how to use AES crypto
Simon Glass
- [U-Boot] status i2c uboot driver ST Microelectronics
Simon Glass
- [U-Boot] [PATCH 09/19] x86: Remove ISR timer
Graeme Russ
- [U-Boot] [PATCH 02/19] x86: Remove unused portion of link script
Graeme Russ
- [U-Boot] [PATCH 01/19] x86: Remove unused bios/pci code
Graeme Russ
- [U-Boot] [PATCH 08/19] x86: Remove old broken timer implementation
Graeme Russ
- [U-Boot] [PATCH 10/19] x86: Re-enable PCAT timer 2 for beeping
Graeme Russ
- [U-Boot] [PATCH 07/19] x86: Add TSC timer
Graeme Russ
- [U-Boot] [PATCH 03/19] x86: Remove legacy board init code
Graeme Russ
- [U-Boot] [PATCH 06/19] x86: Rationalise kernel booting logic and bootstage
Graeme Russ
- [U-Boot] USB Device Identification -- non-removable USB NAND flash
Curt Brune
- [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
prem s
- [U-Boot] phy ic isn't reset
alex
- [U-Boot] [PATCH] Add NanoBone board support
Hebbar, Gururaja
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Albert ARIBAUD
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] PCIe card doesn't work
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] USB Device Identification -- non-removable USB NAND flash
Albert ARIBAUD
- [U-Boot] phy ic isn't reset
Bo Shen
- [U-Boot] [PATCH] ARM: OMAP5: Fix warm reset with USB cable connected
Lokesh Vutla
- [U-Boot] phy ic isn't reset
alex
- [U-Boot] PCIe card doesn't work (wolfking2000)
wolfking
- [U-Boot] phy ic isn't reset
Andreas Bießmann
- [U-Boot] PCIe card doesn't work (wolfking2000)
wolfking
- [U-Boot] phy ic isn't reset
Bo Shen
- [U-Boot] [PATCH v2 00/12] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v2 01/12] mtd: spi: winbond: add W25PXX support
Kuo-Jung Su
- [U-Boot] [PATCH v2 02/12] net: ftgmac100: add MMU/D-cache support
Kuo-Jung Su
- [U-Boot] [PATCH v2 03/12] net: add Faraday FTMAC110 10/100Mbps ethernet support
Kuo-Jung Su
- [U-Boot] [PATCH v2 04/12] i2c: add Faraday FTI2C010 I2C controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 06/12] mmc: add an alternative driver to Faraday FTSDC010
Kuo-Jung Su
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 08/12] mtd: spi: add FTSPI020 SPI Flash controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 09/12] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v2 10/12] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v2 12/12] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Wolfgang Denk
- [U-Boot] [PATCH v2 00/12] arm: add Faraday A36x SoC platform support
Wolfgang Denk
- [U-Boot] [PATCH v2 03/12] net: add Faraday FTMAC110 10/100Mbps ethernet support
Wolfgang Denk
- [U-Boot] [PATCH v2 04/12] i2c: add Faraday FTI2C010 I2C controller support
Wolfgang Denk
- [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support
Wolfgang Denk
- [U-Boot] [PATCH v2 06/12] mmc: add an alternative driver to Faraday FTSDC010
Wolfgang Denk
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Wolfgang Denk
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH v2 08/12] mtd: spi: add FTSPI020 SPI Flash controller support
Wolfgang Denk
- [U-Boot] [PATCH v2 09/12] usb: ehci: add Faraday USB 2.0 EHCI support
Wolfgang Denk
- [U-Boot] [PATCH v2 10/12] usb: gadget: add Faraday FOTG210 USB gadget support
Wolfgang Denk
- [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores
Wolfgang Denk
- [U-Boot] [PATCH v2 12/12] arm: add Faraday A36x SoC platform support
Wolfgang Denk
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Albert ARIBAUD
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Pierre Aubert
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] status i2c uboot driver ST Microelectronics
Mathias LEBLANC
- [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash
Marek Vasut
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Wolfgang Denk
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Wolfgang Denk
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Pierre Aubert
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Pierre AUBERT
- [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Bo Shen
- [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage
Vadim Bendebury (вб)
- [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
Fabio Estevam
- [U-Boot] [PATCH v4] palmtreo680: add utility that writes u-boot to flash
Marek Vasut
- [U-Boot] [UBOOT PATCH 1/2] ARM:Panda:Fix device tree loading for the panda-es
Dan Murphy
- [U-Boot] [UBOOT PATCH 2/2] ARM: Panda: Add flag to allow runtime enviroment varibale mods
Dan Murphy
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Albert ARIBAUD
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Tom Rini
- [U-Boot] [RFC] command/cache: Add flush_cache command
Scott Wood
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Julius Werner
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Wolfgang Denk
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Wolfgang Denk
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Wolfgang Denk
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Fabio Estevam
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Albert ARIBAUD
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Simon Glass
- [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores
Albert ARIBAUD
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Marek Vasut
- [U-Boot] [PATCH] crc32: Correct endianness of crc32 result
Tom Rini
- [U-Boot] [PATCH v2 0/5] consolidate hang()
Wolfgang Denk
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] [PATCH v2] patman: fix gitutil for decorations
Tom Rini
- [U-Boot] [PATCH v2] crc32: Correct endianness of crc32 result
Simon Glass
- [U-Boot] uboot newbie question on booting ep405 board
David Li
- [U-Boot] [PATCH] mx51evk: Update environmet in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin numbering feature
Minkyu Kang
- [U-Boot] [PATCH] powerpc/BSC9132: Add IFC bank count
York Sun
- [U-Boot] uboot newbie question on booting ep405 board
Stefan Roese
- [U-Boot] [PATCH 1/6] imx: Align the imximage header and payload to multiples of 4k
Marek Vasut
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Marek Vasut
- [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target
Marek Vasut
- [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
Marek Vasut
- [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
Marek Vasut
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH v3 0/8] usb: ss: Some fixes and cleanup for USB super-speed support
Vivek Gautam
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Pierre AUBERT
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Pierre AUBERT
- [U-Boot] [PATCH] mx51evk: Update environmet in order to allow booting a dt kernel
Wolfgang Denk
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Wolfgang Denk
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Pierre AUBERT
- [U-Boot] [PATCH 1/6] imx: Align the imximage header and payload to multiples of 4k
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Stefano Babic
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Pierre AUBERT
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Eric Bénard
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH v3 0/5] consolidate hang()
Andreas Bießmann
- [U-Boot] [PATCH v3 1/5] microblaze: fix style in board.c
Andreas Bießmann
- [U-Boot] [PATCH v3 2/5] nios2: fix style in board.c.
Andreas Bießmann
- [U-Boot] [PATCH v3 3/5] mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORT
Andreas Bießmann
- [U-Boot] [PATCH v3 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT
Andreas Bießmann
- [U-Boot] [PATCH v3 5/5] lib: consolidate hang()
Andreas Bießmann
- [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target
Benoît Thébaudeau
- [U-Boot] [PATCH v3 5/5] lib: consolidate hang()
Albert ARIBAUD
- [U-Boot] [PATCH v3 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: Add support for the SabreSD shipped with i.MX6DL
Stefano Babic
- [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
Benoît Thébaudeau
- [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
Benoît Thébaudeau
- [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] [PATCH v3 4/5] tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT
Andreas Bießmann
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Marek Vasut
- [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target
Marek Vasut
- [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
Marek Vasut
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Marek Vasut
- [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
Benoît Thébaudeau
- [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target
Marek Vasut
- [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target
Tom Rini
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH] mx51evk: Update environmet in order to allow booting a dt kernel
Otavio Salvador
- [U-Boot] [PATCH] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Otavio Salvador
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Wolfgang Denk
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Philip Paeps
- [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
Philip Paeps
- [U-Boot] [PATCH 2/3] wandboard: Add support for carrier board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH v3 1/7] mx6qsabre{sd, auto}: Add update_sd_firmware support
Otavio Salvador
- [U-Boot] [PATCH v3 2/7] mx6qsabresd: Return status when initializing MMC
Otavio Salvador
- [U-Boot] [PATCH v3 3/7] wandboard: Use env storage info for mmcdev/mmcpart
Otavio Salvador
- [U-Boot] [PATCH v3 4/7] wandboard: Add update_sd_firmware support
Otavio Salvador
- [U-Boot] [PATCH v3 5/7] wandboard: Add card detection for SOM MicroSD card
Otavio Salvador
- [U-Boot] [PATCH v3 6/7] wandboard: Add support for Carrier Board MicroSD card
Otavio Salvador
- [U-Boot] [PATCH v3 7/7] wandboard: Add boot selection support
Otavio Salvador
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH v2] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH v2] mx51evk: Update environment in order to allow booting a dt kernel
Otavio Salvador
- [U-Boot] [PATCH v2] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH v2] crc32: Correct endianness of crc32 result
Tom Rini
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Philip Paeps
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Fabio Estevam
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Philip Paeps
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [UBOOT PATCH 1/2] ARM:Panda:Fix device tree loading for the panda-es
Dan Murphy
- [U-Boot] [UBOOT PATCH 2/2] ARM: Panda: Add flag to allow runtime enviroment varibale mods
Dan Murphy
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel
Otavio Salvador
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Philip Paeps
- [U-Boot] Displaying characters on the display in u-boot
Bhargav A K
- [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Tom Rini
- [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel
Otavio Salvador
- [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel
Otavio Salvador
- [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx target
Marek Vasut
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Marek Vasut
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Marek Vasut
- [U-Boot] [PATCH v3] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Marek Vasut
- [U-Boot] [PATCH v4 1/2] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH v4 2/2] mx51evk: Do not force the rootfs type
Fabio Estevam
- [U-Boot] [PATCH v4 2/2] mx51evk: Do not force the rootfs type
Otavio Salvador
- [U-Boot] [PATCH v4 1/2] mx51evk: Update environment in order to allow booting a dt kernel
Otavio Salvador
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Julius Werner
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Marek Vasut
- [U-Boot] [U-Boot, v3, 4/8] usb: Update device class in usb device's descriptor
Julius Werner
- [U-Boot] [STATUS] v2013.04 released
Tom Rini
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Julius Werner
- [U-Boot] [STATUS] v2013.04 released
Tom Rini
- [U-Boot] [PATCH 1/2] config_cmd_default.h: Remove CONFIG_CMD_MEMTEST
Tom Rini
- [U-Boot] [PATCH 2/2] feature-removal-schedule.txt: Add CONFIG_SYS_MTEST_START/END
Tom Rini
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] [PATCH v4 2/2] mx51evk: Do not force the rootfs type
Otavio Salvador
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Julius Werner
- [U-Boot] [STATUS] v2013.04 released
Wolfgang Denk
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH v5 1/2] mx51evk: Update environment in order to allow booting a dt kernel
Fabio Estevam
- [U-Boot] [PATCH v5 2/2] mx51evk: Do not force the rootfs type
Fabio Estevam
- [U-Boot] [PATCH v5 1/2] mx51evk: Update environment in order to allow booting a dt kernel
Otavio Salvador
- [U-Boot] [PATCH v5 2/2] mx51evk: Do not force the rootfs type
Otavio Salvador
- [U-Boot] [PATCH] Add NanoBone board support
Tom Rini
- [U-Boot] [STATUS] v2013.04 released
Tom Rini
- [U-Boot] How do I use AM335x eth1 rather than eth0 ?
Bo Shen
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Paul B. Henson
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Trent Piepho
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Marek Vasut
- [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
Marek Vasut
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Marek Vasut
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Benoît Thébaudeau
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux
Mike Dunn
- [U-Boot] [PATCH 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Marek Vasut
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Marek Vasut
- [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux
Otavio Salvador
- [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux
Marek Vasut
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Marek Vasut
- [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements
Simon Glass
- [U-Boot] [PATCH v3 01/17] Trigger generic board error only when building
Simon Glass
- [U-Boot] [PATCH v3 02/17] sandbox: Provide a way to map from host RAM to U-Boot RAM
Simon Glass
- [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board
Simon Glass
- [U-Boot] [PATCH v3 04/17] sandbox: Use generic board init
Simon Glass
- [U-Boot] [PATCH v3 05/17] sandbox: Remove old board init code
Simon Glass
- [U-Boot] [PATCH v3 06/17] sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host file
Simon Glass
- [U-Boot] [PATCH v3 07/17] fdt: Add a parameter to fdt_valid()
Simon Glass
- [U-Boot] [PATCH v3 08/17] Add getenv_hex() to return an environment variable as hex
Simon Glass
- [U-Boot] [PATCH v3 09/17] fdt: Allow fdt command to check and update control FDT
Simon Glass
- [U-Boot] [PATCH v3 10/17] sandbox: fdt: Support fdt command for sandbox
Simon Glass
- [U-Boot] [PATCH v3 11/17] fdt: Skip checking FDT if the pointer is NULL
Simon Glass
- [U-Boot] [PATCH v3 12/17] Revert "fdt- Tell the FDT library where the device tree is"
Simon Glass
- [U-Boot] [PATCH v3 13/17] sandbox: Allow -c argument to provide a command list
Simon Glass
- [U-Boot] [PATCH v3 14/17] sandbox: Support 'source' command
Simon Glass
- [U-Boot] [PATCH v3 15/17] fs: Add support for saving data to filesystems
Simon Glass
- [U-Boot] [PATCH v3 16/17] sandbox: fs: Add support for saving files to host filesystem
Simon Glass
- [U-Boot] [PATCH v3 17/17] sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FIT
Simon Glass
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Mike Dunn
- [U-Boot] [PATCH v5] add support for the palm treo 680 board
Mike Dunn
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Simon Glass
- [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
Marek Vasut
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Wolfgang Denk
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH V2 1/6] imx: Align the imximage header and payload to multiples of 4k
Marek Vasut
- [U-Boot] [PATCH V2 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Marek Vasut
- [U-Boot] [PATCH V2 3/6] arm: imx: Pack u-boot.bin into uImage for SPL
Marek Vasut
- [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
Marek Vasut
- [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
Marek Vasut
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH] powerpc: Use lower case for the core names
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Fabio Estevam
- [U-Boot] [PATCH] video: exynos_fb: Add the missing #else clause
Ajay kumar
- [U-Boot] [PATCH] Fix usb buffer size for large descriptor of devices
Nicolas Chauvet
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] Regression from v2013.04-rc3 with sdcard detection
Nicolas Chauvet
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Wolfgang Denk
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH] video: exynos_fb: Add the missing #else clause
Donghwa Lee
- [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v2 00/12] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v2 12/12] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v2 10/12] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v2 09/12] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v2 08/12] mtd: spi: add FTSPI020 SPI Flash controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 06/12] mmc: add an alternative driver to Faraday FTSDC010
Kuo-Jung Su
- [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 04/12] i2c: add Faraday FTI2C010 I2C controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 03/12] net: add Faraday FTMAC110 10/100Mbps ethernet support
Kuo-Jung Su
- [U-Boot] Driver Model Thoughts
Simon Glass
- [U-Boot] USB detection in u-boot oin our custom board
amit
- [U-Boot] [PATCH v2 1/2] imx: Complete the pin definitions for the i.MX6DL / i.MX6Solo
Pierre Aubert
- [U-Boot] [PATCH v2 2/2] imx: Add support for the SabreSD shipped with i.MX6DL
Pierre Aubert
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [PATCH 3/3] mx6sl: Add initial support for mx6slevk board
Stefano Babic
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Stefano Babic
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Stefan Roese
- [U-Boot] [PATCH 1/3 v2] ppc4xx: Add SPL support
Stefan Roese
- [U-Boot] [PATCH 2/3] Makefile: Add target for combined u-boot.img & spl/u-boot.bin
Stefan Roese
- [U-Boot] [PATCH 3/3 v3] ppc4xx: Add lcd4_lwmon5 support
Stefan Roese
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Vivek Gautam
- [U-Boot] Please pull u-boot-ppc4xx/master
Stefan Roese
- [U-Boot] [PATCH] imx: Add titanium board support (i.MX6 based)
Stefano Babic
- [U-Boot] Driver Model Thoughts
Marek Vasut
- [U-Boot] [PATCH v2] flash: Add optional verify-after-write feature
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH 0/6] Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Dirk Eibach
- [U-Boot] [PATCH 2/6] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
Dirk Eibach
- [U-Boot] [PATCH 3/6] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Dirk Eibach
- [U-Boot] [PATCH 4/6] Add Atmel I2C tpm
Dirk Eibach
- [U-Boot] [PATCH 5/6] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH 6/6] mpc85xx: Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH 1/3] cm-t35: move cm-t35 to live in compulab directory
Igor Grinberg
- [U-Boot] [PATCH 2/3] MAINTAINERS: fix the cm-t35 board name
Igor Grinberg
- [U-Boot] [PATCH 3/3] cm-t35: update config file
Igor Grinberg
- [U-Boot] [PATCH 0/11] Update gdsys ppc4xx-based boards
Dirk Eibach
- [U-Boot] [PATCH 01/11] powerpc/ppc4xx: Add generic accessor functions for gdsys FPGA
Dirk Eibach
- [U-Boot] [PATCH 02/11] powerpc/ppc4xx: Add gdsys mclink interface
Dirk Eibach
- [U-Boot] [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Dirk Eibach
- [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards
Dirk Eibach
- [U-Boot] [PATCH 05/11] powerpc/ppc4xx: Use generic FPGA accessors in gdsys common code
Dirk Eibach
- [U-Boot] [PATCH 06/11] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
Dirk Eibach
- [U-Boot] [PATCH 07/11] powerpc/ppc4xx: Use generic FPGA accessors on all gdsys 405ep/ex boards
Dirk Eibach
- [U-Boot] [PATCH 08/11] powerpc/ppc4xx: Fixup phy erratum on gdsys iocon hardware
Dirk Eibach
- [U-Boot] [PATCH 09/11] powerpc/ppc4xx: Increase timeout for gdsys mclink bus startup
Dirk Eibach
- [U-Boot] [PATCH 10/11] powerpc/ppc4xx: Consider gdsys FPGA OSD size
Dirk Eibach
- [U-Boot] [PATCH 11/11] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards
Dirk Eibach
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Wolfgang Denk
- [U-Boot] [PATCH] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH v2] Add NanoBone board support
Mark Jackson
- [U-Boot] [PATCH v3 0/19] Allow images to work on sandbox
Simon Glass
- [U-Boot] [PATCH v3 01/19] env: Fix minor comment typos in cmd_nvedit
Simon Glass
- [U-Boot] [PATCH v3 02/19] Add minor updates to README.fdt-control
Simon Glass
- [U-Boot] [PATCH v3 03/19] hash: Add a way to calculate a hash for any algortihm
Simon Glass
- [U-Boot] [PATCH v3 04/19] bootstage: Don't build for HOSTCC
Simon Glass
- [U-Boot] [PATCH v3 05/19] mkimage: Move ARRAY_SIZE to header file
Simon Glass
- [U-Boot] [PATCH v3 06/19] libfdt: Add fdt_next_subnode() to permit easy subnode iteration
Simon Glass
- [U-Boot] [PATCH v3 07/19] image: Move timestamp #ifdefs to header file
Simon Glass
- [U-Boot] [PATCH v3 08/19] image: Export fit_check_ramdisk()
Simon Glass
- [U-Boot] [PATCH v3 09/19] image: Split FIT code into new image-fit.c
Simon Glass
- [U-Boot] [PATCH v3 10/19] image: Move HOSTCC image code to tools/
Simon Glass
- [U-Boot] [PATCH v3 11/19] image: Split hash node processing into its own function
Simon Glass
- [U-Boot] [PATCH v3 12/19] image: Convert fit_image_hash_set_value() to static, and rename
Simon Glass
- [U-Boot] [PATCH v3 13/19] image: Rename fit_image_check_hashes() to fit_image_verify()
Simon Glass
- [U-Boot] [PATCH v3 14/19] image: Move hash checking into its own function
Simon Glass
- [U-Boot] [PATCH v3 15/19] image: Move error! string to common place
Simon Glass
- [U-Boot] [PATCH v3 16/19] image: Export fit_conf_get_prop_node()
Simon Glass
- [U-Boot] [PATCH v3 17/19] image: Rename fit_add_hashes() to fit_add_verification_data()
Simon Glass
- [U-Boot] [PATCH v3 18/19] image: Rename hash printing to fit_image_print_verification_data()
Simon Glass
- [U-Boot] [PATCH v3 19/19] sandbox: image: Add support for booting images in sandbox
Simon Glass
- [U-Boot] Driver Model Thoughts
Simon Glass
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Tom Rini
- [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board
Tom Rini
- [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board
Tom Rini
- [U-Boot] [PATCH 1/4] microblaze: Fix reset function
Michal Simek
- [U-Boot] [PATCH 2/4] microblaze: Enable netconsole
Michal Simek
- [U-Boot] [PATCH 3/4] microblaze: Disable all cpu features before reset
Michal Simek
- [U-Boot] [PATCH 4/4] watchdog: Add support for Xilinx Microblaze watchdog
Michal Simek
- [U-Boot] Xilinx Zynq patches
Michal Simek
- [U-Boot] [PATCH 01/14] arm: zynq: U-Boot udelay < 1000 FIX
Michal Simek
- [U-Boot] [PATCH 02/14] zynq: Move scutimer baseaddr to hardware.h
Michal Simek
- [U-Boot] [PATCH 03/14] net: phy: Define Marvell 88e1518 phy
Michal Simek
- [U-Boot] [PATCH 04/14] net: gem: Remove WRAP bit from TX buffer description
Michal Simek
- [U-Boot] [PATCH 05/14] net: gem: Simplify return path in zynq_gem_recv
Michal Simek
- [U-Boot] [PATCH 06/14] net: gem: Do not initialize BDs again
Michal Simek
- [U-Boot] [PATCH 07/14] net: gem: Fix gem driver on 1Gbps LAN
Michal Simek
- [U-Boot] [PATCH 08/14] zynq: Move macros to hardware.h
Michal Simek
- [U-Boot] [PATCH 09/14] net: gem: Pass phy address to init
Michal Simek
- [U-Boot] [PATCH 10/14] net: gem: Preserve clk on emio interface
Michal Simek
- [U-Boot] [PATCH 11/14] net: gem: Add support for phy autodetection
Michal Simek
- [U-Boot] [PATCH 12/14] mmc: Add support for Xilinx Zynq sdhci controller
Michal Simek
- [U-Boot] [PATCH 13/14] i2c: zynq: Add support for Xilinx Zynq
Michal Simek
- [U-Boot] [PATCH 14/14] fpga: Add support for loading bitstream for Xilinx Zynq
Michal Simek
- [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements
Tom Rini
- [U-Boot] [PATCH 3/6] i2c: fsl_i2c:i2c_read(): dont try to write address w/ alen=0
Jim Chargin
- [U-Boot] [PATCH 4/4] watchdog: Add support for Xilinx Microblaze watchdog
Tom Rini
- [U-Boot] [PATCH 1/2] da850: provide davinci_enable_uart0
Eric Bénard
- [U-Boot] [PATCH 2/2] davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK
Eric Bénard
- [U-Boot] [PATCH 02/14] zynq: Move scutimer baseaddr to hardware.h
Tom Rini
- [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C
Mathias leblanc
- [U-Boot] [PATCH 08/14] zynq: Move macros to hardware.h
Tom Rini
- [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements
Simon Glass
- [U-Boot] [PATCH 13/14] i2c: zynq: Add support for Xilinx Zynq
Tom Rini
- [U-Boot] [PATCH 3/6] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Fabio Estevam
- [U-Boot] [PATCH 14/14] fpga: Add support for loading bitstream for Xilinx Zynq
Tom Rini
- [U-Boot] Xilinx Zynq patches
Tom Rini
- [U-Boot] [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Tom Rini
- [U-Boot] Please pull u-boot-ppc4xx/master
Tom Rini
- [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Che-liang Chiou
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PATCH 1/2] config_cmd_default.h: Remove CONFIG_CMD_MEMTEST
Tom Rini
- [U-Boot] [PATCH v3 0/19] Allow images to work on sandbox
Tom Rini
- [U-Boot] [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Tom Rini
- [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C
Tom Rini
- [U-Boot] Driver Model Thoughts
Marek Vasut
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Julius Werner
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Julius Werner
- [U-Boot] [PATCH V2 2/6] nand: Add SPL_NAND support to mxc_nand_spl
Scott Wood
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Kim Phillips
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Paul B. Henson
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Marek Vasut
- [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C
Simon Glass
- [U-Boot] [PATCH 1/2] power: exynos-tmu: fix warnings and clean up code
Simon Glass
- [U-Boot] [PATCH] i2c: add NACK logic in write
Vadim Bendebury
- [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Jaehoon Chung
- [U-Boot] [PATCH V8 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
Amarendra Reddy
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards
Heiko Schocher
- [U-Boot] [PATCH 04/11] powerpc/ppc4xx: Add bitbang i2c interface for gdsys boards
Stefan Roese
- [U-Boot] [U-Boot, v3, 3/8] usb: hub: Power-cycle on root-hub ports
Vivek Gautam
- [U-Boot] [U-Boot, v3, 6/8] USB: SS: Add support for Super Speed USB interface
Vivek Gautam
- [U-Boot] burst transaction test
TigerLiu at viatech.com.cn
- [U-Boot] (WARNING!!! PGP with incorrect signature) Re: [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Eibach, Dirk
- [U-Boot] [PATCH 0/2] Enable network support on at91sam9n12ek board
Bo Shen
- [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support
Bo Shen
- [U-Boot] [PATCH 2/2] ARM: at91sam9n12: add network support with ksz8851_16mll
Bo Shen
- [U-Boot] [PATCH v2 0/15] Xilinx Zynq patches
Michal Simek
- [U-Boot] [PATCH v2 01/15] arm: zynq: U-Boot udelay < 1000 FIX
Michal Simek
- [U-Boot] [PATCH v2 02/15] arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses
Michal Simek
- [U-Boot] [PATCH v2 03/15] zynq: Move scutimer baseaddr to hardware.h
Michal Simek
- [U-Boot] [PATCH v2 04/15] net: phy: Define Marvell 88e1518 phy
Michal Simek
- [U-Boot] [PATCH v2 05/15] net: gem: Remove WRAP bit from TX buffer description
Michal Simek
- [U-Boot] [PATCH v2 06/15] net: gem: Simplify return path in zynq_gem_recv
Michal Simek
- [U-Boot] [PATCH v2 07/15] net: gem: Do not initialize BDs again
Michal Simek
- [U-Boot] [PATCH v2 08/15] net: gem: Fix gem driver on 1Gbps LAN
Michal Simek
- [U-Boot] [PATCH v2 09/15] zynq: Move macros to hardware.h
Michal Simek
- [U-Boot] [PATCH v2 10/15] net: gem: Pass phy address to init
Michal Simek
- [U-Boot] [PATCH v2 11/15] net: gem: Preserve clk on emio interface
Michal Simek
- [U-Boot] [PATCH v2 12/15] net: gem: Add support for phy autodetection
Michal Simek
- [U-Boot] [PATCH v2 13/15] mmc: Add support for Xilinx Zynq sdhci controller
Michal Simek
- [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq
Michal Simek
- [U-Boot] [PATCH v2 15/15] fpga: Add support for loading bitstream for Xilinx Zynq
Michal Simek
- [U-Boot] Xilinx Zynq patches
Michal Simek
- [U-Boot] (WARNING!!! PGP with incorrect signature) Re: [PATCH 03/11] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
Tom Rini
- [U-Boot] (Mixed security state) Re: [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Pfau, Reinhard
- [U-Boot] burst transaction test
Wolfgang Denk
- [U-Boot] Add filesystem support
Pietro Paolini
- [U-Boot] [PATCH v2 0/4] Xilinx Microblaze patches
Michal Simek
- [U-Boot] [PATCH v2 1/4] microblaze: Fix reset function
Michal Simek
- [U-Boot] [PATCH v2 2/4] microblaze: Enable netconsole
Michal Simek
- [U-Boot] [PATCH v2 3/4] microblaze: Disable all cpu features before reset
Michal Simek
- [U-Boot] [PATCH v2 4/4] watchdog: Add support for Xilinx Microblaze watchdog
Michal Simek
- [U-Boot] (Mixed security state) Re: [PATCH 1/6] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Tom Rini
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Tom Rini
- [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support
Tom Rini
- [U-Boot] Add filesystem support
Wolfgang Denk
- [U-Boot] [RFC] Remove ^L string
Bo Shen
- [U-Boot] [PATCH v2 0/15] Xilinx Zynq patches
Tom Rini
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Julius Werner
- [U-Boot] [PATCH] nds32: Use sections header to obtain link symbols
ken kuo
- [U-Boot] [RFC] Remove ^L string
Wolfgang Denk
- [U-Boot] [PATCH v2 4/4] watchdog: Add support for Xilinx Microblaze watchdog
Tom Rini
- [U-Boot] [PATCH v2 2/4] microblaze: Enable netconsole
Tom Rini
- [U-Boot] [RFC] Remove ^L string
Tom Rini
- [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH v4 02/10] imx: Add useful fuse definitions
Benoît Thébaudeau
- [U-Boot] [PATCH v4 03/10] Add fuse API and commands
Benoît Thébaudeau
- [U-Boot] [PATCH v4 04/10] Add fsl_iim driver
Benoît Thébaudeau
- [U-Boot] [PATCH v4 05/10] mpc: iim: Switch to common fsl_iim
Benoît Thébaudeau
- [U-Boot] [PATCH v4 06/10] mx51evk: Enable support for iim
Benoît Thébaudeau
- [U-Boot] [PATCH v4 07/10] Add mxc_ocotp driver
Benoît Thébaudeau
- [U-Boot] [PATCH v4 08/10] mx6qsabrelite: Enable support for ocotp
Benoît Thébaudeau
- [U-Boot] [PATCH v4 09/10] nitrogen6x: Enable support for ocotp
Benoît Thébaudeau
- [U-Boot] [PATCH v4 10/10] imx: Document fuse assignments for MAC addresses
Benoît Thébaudeau
- [U-Boot] [RFC] Remove ^L string
Wolfgang Denk
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Jagan Teki
- [U-Boot] [PATCH v2 10/15] sf: Enable FDT-based configuration and memory mapping
Jagan Teki
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH v2 10/15] sf: Enable FDT-based configuration and memory mapping
Simon Glass
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Jagan Teki
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Jagan Teki
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Simon Glass
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Tom Rini
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Marek Vasut
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Simon Glass
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support
Bo Shen
- [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support
Tom Rini
- [U-Boot] [RFC] Remove ^L string
Bo Shen
- [U-Boot] [PATCH 1/2] net: ks8851_mll: add ethernet support
Bo Shen
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Otavio Salvador
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Simon Glass
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Otavio Salvador
- [U-Boot] [Patch v2 0/3] Enable network support on at91sam9n12ek board
Bo Shen
- [U-Boot] [Patch v2 1/3] checkpatch: add ignore for network block comment style checking
Bo Shen
- [U-Boot] [Patch v2 2/3] net: ks8851_mll: add ethernet support
Bo Shen
- [U-Boot] [Patch v2 3/3] ARM: at91sam9n12: add network support with ksz8851_16mll
Bo Shen
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Simon Glass
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Otavio Salvador
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Simon Glass
- [U-Boot] CONFIG_FIT on mx28evk board
Paul B. Henson
- [U-Boot] mx28evk initramfs load address
Paul B. Henson
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Wolfgang Denk
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Wolfgang Denk
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Vivek Gautam
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] [PATCH 1/2] powerpc/85xx: Add C29x SoC support
Po Liu
- [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board
Po Liu
- [U-Boot] [PATCH] git-mailrc: Add trini shortcut
Michal Simek
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] patman and buildman experience
Michal Simek
- [U-Boot] [PATCH 0/3] net: macb: add support for gigabit MAC
Bo Shen
- [U-Boot] [PATCH 1/3] net: macb: using AT91FAMILY replace #ifdeferry
Bo Shen
- [U-Boot] [PATCH 2/3] net: macb: using phylib to configure phy device
Bo Shen
- [U-Boot] [PATCH 3/3] net: macb: add support for gigabit MAC
Bo Shen
- [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze
Michal Simek
- [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO
Michal Simek
- [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze
Michal Simek
- [U-Boot] ECCN code for uboot
takeshi.harada.hq at hitachi.com
- [U-Boot] [PATCH V2 0/5] ARM: OMAP: Cleanup save_boot_params function
Sricharan R
- [U-Boot] [PATCH V2 1/5] ARM: OMAP: Make omap_boot_parameters common across socs
Sricharan R
- [U-Boot] [PATCH V2 2/5] ARM: OMAP4/5: Make OMAPx_SRAM_SCRATCH_ defines common
Sricharan R
- [U-Boot] [PATCH V2 3/5] ARM: OMAP: Correct save_boot_params and replace with 'C' function
Sricharan R
- [U-Boot] [PATCH V2 4/5] ARM: OMAP: Cleanup boot parameters usage
Sricharan R
- [U-Boot] [PATCH V2 5/5] ARM: OMAP: Add arch_cpu_init function
Sricharan R
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Dirk Eibach
- [U-Boot] ECCN code for uboot
Wolfgang Denk
- [U-Boot] [PATCH] usb: common: Use a global definition for 'min3'
Marek Vasut
- [U-Boot] [PATCH 1/2] mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct
Stefan Roese
- [U-Boot] [PATCH 2/2] mpc5200: a3m071/a4m2k: Add redundant environment support
Stefan Roese
- [U-Boot] Add filesystem support
Pietro Paolini
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH 0/3] usb: ss: Fixes for super speed framework
Vivek Gautam
- [U-Boot] [PATCH 1/3] usb: hub: Parallelize power-cycling of root-hub ports
Vivek Gautam
- [U-Boot] [PATCH 2/3] usb: fix: Fixing Port status and feature number constants
Vivek Gautam
- [U-Boot] [PATCH 3/3] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Dirk Eibach
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Stefan Roese
- [U-Boot] [PATCH 3/3] usb: common: Use a global definition for 'min3'
Vivek Gautam
- [U-Boot] Add filesystem support
Wolfgang Denk
- [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions
Benoît Thébaudeau
- [U-Boot] [Patch v2 2/3] net: ks8851_mll: add ethernet support
Raffaele Recalcati
- [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo
Simon Glass
- [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo
Pavel Herrmann
- [U-Boot] [PATCH 2/3] usb: fix: Fixing Port status and feature number constants
Julius Werner
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Fabio Estevam
- [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx53ard: Rework default environment to support FDT, MMC and netboot
Otavio Salvador
- [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
Marek Vasut
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
Otavio Salvador
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Otavio Salvador
- [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx53ard: Rework default environment to support FDT, MMC and netboot
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx5: Define a common get_board_rev()
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx5: Select CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx53ard: Move register masks into imx-regs.h
Fabio Estevam
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx53ard: Move register masks into imx-regs.h
Marek Vasut
- [U-Boot] [PATCH 2/3] mx5: Select CONFIG_REVISION_TAG
Marek Vasut
- [U-Boot] ECCN code for uboot
takeshi.harada.hq at hitachi.com
- [U-Boot] [PATCH 1/3] mx5: Define a common get_board_rev()
Marek Vasut
- [U-Boot] [PATCH RESEND] arm: bootm: call udc_disable() before booting linux
Marek Vasut
- [U-Boot] [PATCH 0/3] usb: ss: Fixes for super speed framework
Marek Vasut
- [U-Boot] [PATCH 0/3] usb: ss: Fixes for super speed framework
Vivek Gautam
- [U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common.
Rajeshwari Shinde
- [U-Boot] [PATCH 1/4] EXYNOS: Add API for power reset and exit wakeup
Rajeshwari Shinde
- [U-Boot] [PATCH 2/4] EXYNOS: LDS file move to common
Rajeshwari Shinde
- [U-Boot] [PATCH 3/4] EXYNOS4210: Configure GPIO for uart
Rajeshwari Shinde
- [U-Boot] [PATCH 4/4] EXYNOS: Move files from board/samsung to arch/arm.
Rajeshwari Shinde
- [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions
Stefano Babic
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] [PATCH][v2] powerpc/85xx: Add TWR-P10xx board support
Xie Xiaobo
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefan Roese
- [U-Boot] MIPI-CSI Support question
TigerLiu at viatech.com.cn
- [U-Boot] CONFIG_ARM_ERRATA_7XXXX question
TigerLiu at viatech.com.cn
- [U-Boot] CONFIG_ARM_ERRATA_7XXXX question
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 3/3] usb: common: Use a global definition for 'min3'
Tom Rini
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 01/16] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Dirk Eibach
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefan Roese
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Benoît Thébaudeau
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Dirk Eibach
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] ECCN code for uboot
Wolfgang Denk
- [U-Boot] MIPI-CSI Support question
Wolfgang Denk
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefan Roese
- [U-Boot] P2020RDB: Error while using P2020RDB_SDCARD
Franck Jullien
- [U-Boot] [RFC] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Jagan Teki
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] Questions about U-boot of customized MPC8315E board
du zhenhuan
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Stefano Babic
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] Power Savings on ARM/OMAP4
Michael Cashwell
- [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux
Tom Rini
- [U-Boot] [PATCH] arm: Enable -ffunction-sections / -fdata-sections / --gc-sections
Tom Rini
- [U-Boot] [PATCH v2 0/45] Verified boot implementation based on FIT
Simon Glass
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Tom Rini
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Jagan Teki
- [U-Boot] [PATCH 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH] arm: imx: Codingstyle enhancement of include/asm/arch-mx6/crm_regs.h
Stefano Babic
- [U-Boot] [PATCH] mx35 iomux: correct input select register index
Stefano Babic
- [U-Boot] [PATCH] imx: mx6q_4x_mt41j128.cfg: Setup CCM_CCOSR register
Stefano Babic
- [U-Boot] [PATCH] nitrogen6x: Setup CCM_CCOSR register
Stefano Babic
- [U-Boot] P2020RDB: Error while using P2020RDB_SDCARD
Wolfgang Denk
- [U-Boot] Questions about U-boot of customized MPC8315E board
Wolfgang Denk
- [U-Boot] [PATCH v3 1/7] mx6qsabre{sd, auto}: Add update_sd_firmware support
Stefano Babic
- [U-Boot] [PATCH v3 2/7] mx6qsabresd: Return status when initializing MMC
Stefano Babic
- [U-Boot] [PATCH v3 3/7] wandboard: Use env storage info for mmcdev/mmcpart
Stefano Babic
- [U-Boot] [PATCH v3 4/7] wandboard: Add update_sd_firmware support
Stefano Babic
- [U-Boot] [PATCH v3 5/7] wandboard: Add card detection for SOM MicroSD card
Stefano Babic
- [U-Boot] [PATCH v3 6/7] wandboard: Add support for Carrier Board MicroSD card
Stefano Babic
- [U-Boot] [PATCH v3 7/7] wandboard: Add boot selection support
Stefano Babic
- [U-Boot] [PATCH v5 1/2] mx51evk: Update environment in order to allow booting a dt kernel
Stefano Babic
- [U-Boot] [PATCH v5 2/2] mx51evk: Do not force the rootfs type
Stefano Babic
- [U-Boot] [PATCH 1/3] mx5: Define a common get_board_rev()
Stefano Babic
- [U-Boot] [PATCH 2/3] mx5: Select CONFIG_REVISION_TAG
Stefano Babic
- [U-Boot] [PATCH 3/3] mx53ard: Move register masks into imx-regs.h
Stefano Babic
- [U-Boot] [PATCH V2 6/6] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
Marek Vasut
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file
Stefano Babic
- [U-Boot] [PATCH v2] Add NanoBone board support
Tom Rini
- [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
Marek Vasut
- [U-Boot] [PATCH] am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
Tom Rini
- [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
Benoît Thébaudeau
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Wolfgang Denk
- [U-Boot] [PATCH v3 0/5] consolidate hang()
Simon Glass
- [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file
Benoît Thébaudeau
- [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file
Fabio Estevam
- [U-Boot] [PATCH 0/19] Remove unused code, add accurate timier and bootstage
Simon Glass
- [U-Boot] MIPI-CSI Support question
TigerLiu at viatech.com.cn
- [U-Boot] ECCN code for uboot
takeshi.harada.hq at hitachi.com
- [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
Marek Vasut
- [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
Marek Vasut
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Marek Vasut
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux
Bo Shen
- [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting
Marek Vasut
- [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting
Otavio Salvador
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Naveen Krishna Ch
- [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting
Marek Vasut
- [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting
Otavio Salvador
- [U-Boot] MIPI-CSI Support question
Wolfgang Denk
- [U-Boot] Questions about U-boot of customized MPC8315E board
zhenhuan
- [U-Boot] Problems with Linker Symbols to make HAB on i.MX28 work
Christopher Preschern
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Jagan Teki
- [U-Boot] [PATCH v2 0/7] Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH v2 1/7] Update gdsys email account
Dirk Eibach
- [U-Boot] [PATCH v2 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Dirk Eibach
- [U-Boot] [PATCH v2 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
Dirk Eibach
- [U-Boot] [PATCH v2 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Dirk Eibach
- [U-Boot] [PATCH v2 5/7] Add Atmel I2C tpm
Dirk Eibach
- [U-Boot] [PATCH v2 6/7] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH v2 7/7] mpc85xx: Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH v3 0/7] Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH v3 1/7] Update gdsys email account
Dirk Eibach
- [U-Boot] [PATCH v3 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Dirk Eibach
- [U-Boot] [PATCH v3 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
Dirk Eibach
- [U-Boot] [PATCH v3 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Dirk Eibach
- [U-Boot] [PATCH v3 5/7] Add Atmel I2C tpm
Dirk Eibach
- [U-Boot] [PATCH v3 6/7] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH v3 7/7] mpc85xx: Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH v3 1/3] iomux-v3: Place pad control definitions into common file
Stefano Babic
- [U-Boot] [PATCH RESEND] env_mmc: add support for redundant environment
Michael Heimpold
- [U-Boot] Questions about U-boot of customized MPC8315E board
Wolfgang Denk
- [U-Boot] [PATCH v3 6/7] powerpc: Build arch/powerpc/lib/bootm.o depending on CONFIG_CMD_BOOTM
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
Stefano Babic
- [U-Boot] [PATCH 1/2] mxs: mxsboot: Move sdcard BCB header to 4 sectors offset
Stefano Babic
- [U-Boot] [PATCH 2/2] mx53ard: Rework default environment to support FDT, MMC and netboot
Stefano Babic
- [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions
Stefano Babic
- [U-Boot] [PATCH] cmd_boot: cleanup for 'go' command
Kuo-Jung Su
- [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
Kuo-Jung Su
- [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v3 01/11] arm: add MMU/D-Cache support for Faraday cores
Kuo-Jung Su
- [U-Boot] [PATCH v3 02/11] net: ftgmac100: add MMU/D-cache support
Kuo-Jung Su
- [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support
Kuo-Jung Su
- [U-Boot] [PATCH v3 04/11] i2c: add Faraday FTI2C010 I2C controller support
Kuo-Jung Su
- [U-Boot] [PATCH v3 05/11] spi: add Faraday FTSPI010 SPI controller support
Kuo-Jung Su
- [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue
Kuo-Jung Su
- [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v3 09/11] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] [PATCH v3 10/11] video: add Faraday FTLCDC200 LCD controller support
Kuo-Jung Su
- [U-Boot] [PATCH v3 11/11] arm: add Faraday A36x SoC platform support
Kuo-Jung Su
- [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions
Benoît Thébaudeau
- [U-Boot] [PATCH v4 0/7] Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH v4 1/7] Update gdsys email account
Dirk Eibach
- [U-Boot] [PATCH v4 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
Dirk Eibach
- [U-Boot] [PATCH v4 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
Dirk Eibach
- [U-Boot] [PATCH v4 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
Dirk Eibach
- [U-Boot] [PATCH v4 5/7] Add Atmel I2C tpm
Dirk Eibach
- [U-Boot] [PATCH v4 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH v4 7/7] mpc85xx: Add gdsys ControlCenter Digital board
Dirk Eibach
- [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions
Stefano Babic
- [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
Stefano Babic
- [U-Boot] [PATCH V2 1/5] ARM: OMAP5: Rename omap5_evm to omap5_uevm
Smithlife
- [U-Boot] [PATCH] at91sam9x5ek: Pass serial and revision tags to Linux
Julius Hemanth P
- [U-Boot] [PATCH] Allow U-Boot scripts to be placed in a .env file
Smithlife
- [U-Boot] [PATCH v5] palmtreo680: add utility that writes u-boot to flash
Smithlife
- [U-Boot] [PATCH] Tegra: Remove unused/non-existent spl linker script reference
Smithlife
- [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
Stefan Roese
- [U-Boot] P2020RDB: Error while using P2020RDB_SDCARD
Franck Jullien
- [U-Boot] [PATCH 1/2 v2] mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct
Stefan Roese
- [U-Boot] [PATCH 2/2 v2] mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes
Stefan Roese
- [U-Boot] [PATCH 1/2] fpga: Clean coding style
Michal Simek
- [U-Boot] [PATCH 2/2] fpga: Fix debug message compilation error
Michal Simek
- [U-Boot] [PATCH 1/2] mmc: atmel_mci: using IP version for different setting
Bo Shen
- [U-Boot] [PATCH 2/2] mmc: atmel_mci: add mmc card support
Bo Shen
- [U-Boot] [PATCH] cmd_boot: cleanup for 'go' command
Wolfgang Denk
- [U-Boot] [PATCH v4 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
Wolfgang Denk
- [U-Boot] [PATCH 1/2] fpga: Clean coding style
Michal Simek
- [U-Boot] [PATCH 1/4] imx: iomux-v3: Fix common pad control definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 2/4] imx: iomux-v3: cosmetic: Reorganize definitions
Benoît Thébaudeau
- [U-Boot] [PATCH 3/4] imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
Benoît Thébaudeau
- [U-Boot] [PATCH 4/4] imx: iomux-v3: Include PKE and PUE to pad control pull definitions
Benoît Thébaudeau
- [U-Boot] [UBOOT PATCH 1/2] ARM:Panda:Fix device tree loading for the panda-es
Dan Murphy
- [U-Boot] [UBOOT PATCH 2/2] ARM: Panda: Add flag to allow runtime enviroment varibale mods
Dan Murphy
- [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting
Marek Vasut
- [U-Boot] [PATCH v4 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
Dirk Eibach
- [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support
Marek Vasut
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH v3 09/11] usb: gadget: add Faraday FOTG210 USB gadget support
Marek Vasut
- [U-Boot] [PATCH v4 03/15] sandbox: Switch over to generic board
Simon Glass
- [U-Boot] [PATCH v3 03/17] sandbox: Add support for generic board
Simon Glass
- [U-Boot] [PATCH v3 0/17] sandbox: Generic board support and other improvements
Simon Glass
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] [RFC PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Andre Przywara
- [U-Boot] [RFC PATCH 2/6] ARM: add assembly routine to switch to non-secure state
Andre Przywara
- [U-Boot] [RFC PATCH 3/6] ARM: add U-Boot command "hypmode" to switch to non-secure state
Andre Przywara
- [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch
Andre Przywara
- [U-Boot] [RFC PATCH 5/6] ARM: extend non-secure switch to also go into HYP mode
Andre Przywara
- [U-Boot] [RFC PATCH 6/6] ARM: VExpress: enable ARMv7 virt support for VExpress A15
Andre Przywara
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Peter Maydell
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo
Simon Glass
- [U-Boot] [PATCH 07/19] x86: Add TSC timer
Simon Glass
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Peter Maydell
- [U-Boot] [PATCH 10/19] x86: Re-enable PCAT timer 2 for beeping
Simon Glass
- [U-Boot] [PATCH v2 07/16] x86: Replace timer implementation with TSC timer
Simon Glass
- [U-Boot] mx23evk resets when loading the kernel
Fabio Estevam
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Andre Przywara
- [U-Boot] mx23evk resets when loading the kernel
Marek Vasut
- [U-Boot] mx23evk resets when loading the kernel
Fabio Estevam
- [U-Boot] mx23evk resets when loading the kernel
Fabio Estevam
- [U-Boot] mx23evk resets when loading the kernel
Marek Vasut
- [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board
Igor Ferrara
- [U-Boot] mx23evk resets when loading the kernel
Marek Vasut
- [U-Boot] mx23evk resets when loading the kernel
Fabio Estevam
- [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo
Pavel Herrmann
- [U-Boot] [PATCH] OMAP5: Add support for the SOM5_EVB board (OMAP5430-based)
Lubomir Popov
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board
Eric Bénard
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Eric Bénard
- [U-Boot] [PATCH] mx23: Fix the size of internal RAM
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [PATCH] mx23: Fix the size of internal RAM
Otavio Salvador
- [U-Boot] [PATCH] mx23: Fix the size of internal RAM
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Robert Nelson
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [RFC PATCH 0/6] ARMv7: Add HYP mode switching support
Christoffer Dall
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Jagan Teki
- [U-Boot] [PATCH v2 08/15] sf: Respect maximum SPI write size
Simon Glass
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Eric Bénard
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Otavio Salvador
- [U-Boot] [PATCH] arm: mxs: Fix vectoring table crafting
Fabio Estevam
- [U-Boot] [U-boot] mmc write|read howto
Jagan Teki
- [U-Boot] [PATCH 1/6] imx: iomux-v3: Add iomux-mx25.h
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] imx: mx25pdk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 3/6] imx: mx25pdk: Fix GPIO assignments
Benoît Thébaudeau
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH 4/6] imx: tx25: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 5/6] imx: zmx25: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] imx: mx25: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH v4 4/7] i2c: fsl_i2c:i2c_read(): dont try to write address w/ alen=0
Jim Chargin
- [U-Boot] [PATCH] am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
Peter Korsgaard
- [U-Boot] [RFC PATCH 1/6] ARM: add secure monitor handler to switch to non-secure state
Christoffer Dall
- [U-Boot] [RFC PATCH 4/6] ARM: add SMP support for non-secure switch
Christoffer Dall
- [U-Boot] SDRAM init on OMAP4
Michael Cashwell
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Otavio Salvador
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] [PATCH V9 0/9] EXYNOS5: Enable DWMMC, add FDT support for DWMMC and enable EMMC boot
amar_g
- [U-Boot] [PATCH V9 1/9] FDT: Add compatible string for DWMMC
amar_g
- [U-Boot] [PATCH V9 2/9] EXYNOS5: FDT: Add DWMMC device node data
amar_g
- [U-Boot] [PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues
amar_g
- [U-Boot] [PATCH V9 4/9] EXYNOS5: DWMMC: Added FDT support for DWMMC
amar_g
- [U-Boot] [PATCH V9 5/9] EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
amar_g
- [U-Boot] [PATCH V9 6/9] SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
amar_g
- [U-Boot] [PATCH V9 7/9] MMC: APIs to support resize of EMMC boot partition
amar_g
- [U-Boot] [PATCH V9 8/9] SMDK5250: Enable EMMC booting
amar_g
- [U-Boot] [PATCH V9 9/9] COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
amar_g
- [U-Boot] [U-boot] mmc write|read howto
Josh Wu
- [U-Boot] R: Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board
Igor Ferrara
- [U-Boot] [U-boot] mmc write|read howto
Jagan Teki
- [U-Boot] [U-boot] mmc write|read howto
Josh Wu
- [U-Boot] [U-boot] mmc write|read howto
Josh Wu
- [U-Boot] [PATCH v1] mmc: bfin: Ensure MMR writing is done before next command.
Sonic Zhang
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Stefano Babic
- [U-Boot] [PATCH v1] mmc: bfin: Ensure MMR writing is done before next command.
Mike Frysinger
- [U-Boot] [PATCH v1] mmc: bfin: Ensure MMR writing is done before next command.
Sonic Zhang
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] CONFIG_ARM_ERRATA_7XXXX question again
TigerLiu at viatech.com.cn
- [U-Boot] picture format
TigerLiu at viatech.com.cn
- [U-Boot] Sections of RAM used by u boot
Scott A
- [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze
Simon Glass
- [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO
Simon Glass
- [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo
Simon Glass
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Fabio Estevam
- [U-Boot] [RFC PATCH] WIP: Simplified device model implementation and demo
Pavel Herrmann
- [U-Boot] [PATCH] build: Pull -DBUILD_TAG into separate ifdef
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Otavio Salvador
- [U-Boot] [PATCH] build: Pull -DBUILD_TAG into separate ifdef
Otavio Salvador
- [U-Boot] Beginner question: need help about LVDS channels for i.MX6Q SabreSD Board
Fabio Estevam
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] Sections of RAM used by u boot
Wolfgang Denk
- [U-Boot] Displaying characters on the display in u-boot
Bhargav A K
- [U-Boot] [PATCH] env: don't add an empty key to the env hashtable
Lucian Cojocar
- [U-Boot] [PATCH] env: don't add an empty key to the env hashtable
Wolfgang Denk
- [U-Boot] [PATCH] env: don't add an empty key to the env hashtable
Lucian Cojocar
- [U-Boot] How to make DocBook
TigerLiu at viatech.com.cn
- [U-Boot] [RFC PATCH 0/15] RFC: Add tracing functionality to U-Boot
Simon Glass
- [U-Boot] [RFC PATCH 01/15] bootstage; Correct printf types
Simon Glass
- [U-Boot] [RFC PATCH 02/15] Add function to print a number with grouped digits
Simon Glass
- [U-Boot] [RFC PATCH 03/15] Add trace library
Simon Glass
- [U-Boot] [RFC PATCH 04/15] Add a trace command
Simon Glass
- [U-Boot] [RFC PATCH 05/15] Support tracing in config.mk when enabled
Simon Glass
- [U-Boot] [RFC PATCH 06/15] Add trace support to generic board
Simon Glass
- [U-Boot] [RFC PATCH 07/15] Add proftool to decode profile data
Simon Glass
- [U-Boot] [RFC PATCH 08/15] sandbox: Support trace feature
Simon Glass
- [U-Boot] [RFC PATCH 09/15] Add a simple test for sandbox trace
Simon Glass
- [U-Boot] [RFC PATCH 10/15] Clarify bootm OS arguments
Simon Glass
- [U-Boot] [RFC PATCH 11/15] Refactor the bootm command to reduce code duplication
Simon Glass
- [U-Boot] [RFC PATCH 12/15] Add a 'fake' go command to the bootm command
Simon Glass
- [U-Boot] [RFC PATCH 13/15] arm: Implement the 'fake' go command
Simon Glass
- [U-Boot] [RFC PATCH 14/15] Show stdout on error in fit-test
Simon Glass
- [U-Boot] [RFC PATCH 15/15] exynos: Avoid function instrumentation for microsecond timer
Simon Glass
- [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support
Wang Huan-B18965
- [U-Boot] what is sandbox?
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH] p1020rdb-pd: platform support
Haijun.Zhang
- [U-Boot] [PATCH] env: don't add an empty key to the env hashtable
Wolfgang Denk
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Stefano Babic
- [U-Boot] [PATCH v4 01/10] imx: Homogenize and fix fuse register definitions
Stefano Babic
- [U-Boot] [PATCH v4 02/10] imx: Add useful fuse definitions
Stefano Babic
- [U-Boot] [PATCH v4 03/10] Add fuse API and commands
Stefano Babic
- [U-Boot] [PATCH v4 10/10] imx: Document fuse assignments for MAC addresses
Stefano Babic
- [U-Boot] [PATCH v4 04/10] Add fsl_iim driver
Stefano Babic
- [U-Boot] [PATCH v4 05/10] mpc: iim: Switch to common fsl_iim
Stefano Babic
- [U-Boot] [PATCH v4 06/10] mx51evk: Enable support for iim
Stefano Babic
- [U-Boot] what is sandbox?
Wolfgang Denk
- [U-Boot] [PATCH v4 07/10] Add mxc_ocotp driver
Stefano Babic
- [U-Boot] [PATCH v4 08/10] mx6qsabrelite: Enable support for ocotp
Stefano Babic
- [U-Boot] [PATCH v4 09/10] nitrogen6x: Enable support for ocotp
Stefano Babic
- [U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
Stefano Babic
- [U-Boot] what is sandbox?
TigerLiu at viatech.com.cn
- [U-Boot] [PATCH 1/4] imx: iomux-v3: Fix common pad control definitions
Stefano Babic
- [U-Boot] [PATCH 2/4] imx: iomux-v3: cosmetic: Reorganize definitions
Stefano Babic
- [U-Boot] [PATCH 3/4] imx: iomux-v3: Restore Linux's NEW_PAD_CTRL() macro
Stefano Babic
- [U-Boot] [PATCH 4/4] imx: iomux-v3: Include PKE and PUE to pad control pull definitions
Stefano Babic
- [U-Boot] [PATCH 0/5] vybrid: Add vybrid CPU and vf600 tower board support
Wang Huan-B18965
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
Wang Huan-B18965
- [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses
Andrew Gabbasov
- [U-Boot] [PATCH 2/5] vybrid: add Freescale vybrid vf600 tower board support
Wang Huan-B18965
- [U-Boot] [PATCH 1/5] vybrid: add vybrid CPU support
Stefano Babic
- [U-Boot] [PATCH 3/5] vybrid: add uart driver support
Wang Huan-B18965
- [U-Boot] [PATCH 4/5] vybrid: add eSDHC driver support
Wang Huan-B18965
- [U-Boot] Displaying characters on the display in u-boot
Anatolij Gustschin
- [U-Boot] what is sandbox?
Wolfgang Denk
- [U-Boot] mx28evk spi boot
smithknown
- [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path
Marek Vasut
- [U-Boot] How to make DocBook
Marek Vasut
- [U-Boot] what is sandbox?
Marek Vasut
- [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses
Marek Vasut
- [U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function
Marek Vasut
- [U-Boot] [PATCH 2/4] arm: mxs: Add LCDIF registers for i.MX233
Marek Vasut
- [U-Boot] [PATCH 3/4] arm: mxs: Add MXS LCDIF driver
Marek Vasut
- [U-Boot] [PATCH 4/4] arm: mxs: video: Enable MXS LCDIF on M28EVK
Marek Vasut
- [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path
Otavio Salvador
- [U-Boot] [PATCH v2] env: throw an error when an empty key is used
Lucian Cojocar
- [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path
Otavio Salvador
- [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path
Marek Vasut
- [U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value
Marek Vasut
- [U-Boot] [PATCH] arm: mxs: Preprocess u-boot.bd so they contain full path
Otavio Salvador
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Marek Vasut
- [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path
Marek Vasut
- [U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path
Otavio Salvador
- [U-Boot] [PATCH] cmd_boot: cleanup for 'go' command
Kuo-Jung Su
- [U-Boot] [PATCH v2] cmd_boot: cleanup for 'go' command
Kuo-Jung Su
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Marek Vasut
- [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v3 09/11] usb: gadget: add Faraday FOTG210 USB gadget support
Kuo-Jung Su
- [U-Boot] mx28evk spi boot
smithknown
- [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] [PATCH v3 04/11] i2c: add Faraday FTI2C010 I2C controller support
Heiko Schocher
- [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq
Heiko Schocher
- [U-Boot] u-boot UBI support
Paul B. Henson
- [U-Boot] [PATCH v2] mmc: Split device init to decouple OCR-polling delay
Jaehoon Chung
- [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq
Michal Simek
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Minkyu Kang
- [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze
Michal Simek
- [U-Boot] u-boot was skipped: because UBOOT_MACHINE is not set
Zafrullah Syed
- [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO
Michal Simek
- [U-Boot] u-boot UBI support
Sascha Silbe
- [U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support
Jim Lin
- [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114
Jim Lin
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Jim Lin
- [U-Boot] [PATCH 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
Jim Lin
- [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Andrew Gabbasov
- [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses
Gabbasov, Andrew
- [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
Gabbasov, Andrew
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Otavio Salvador
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Kiril Zyapkov
- [U-Boot] [PATCH 01/16] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
Heiko Schocher
- [U-Boot] [PULL] : Please pull u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Marek Vasut
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Fabio Estevam
- [U-Boot] [PULL] : Please pull u-boot-i2c
Tom Rini
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Marek Vasut
- [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
Fabio Estevam
- [U-Boot] [PATCH] am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO
Tom Rini
- [U-Boot] beagleboard: Update comment in get_board_rev()
Tom Rini
- [U-Boot] [U-Boot, V2] arm: omap: emif: Fix DDR3 init after warm reset
Tom Rini
- [U-Boot] [U-Boot, PATCHv2, 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS.
Tom Rini
- [U-Boot] [U-Boot, v3] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work
Tom Rini
- [U-Boot] omap5_common: Add optargs variable for kernel command line args
Tom Rini
- [U-Boot] Remove duplicate / unused #defines on AM335x boards
Tom Rini
- [U-Boot] ARM: OMAP5: Fix warm reset with USB cable connected
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM:Panda:Fix device tree loading for the panda-es
Tom Rini
- [U-Boot] [PATCH 1/2] da850: provide davinci_enable_uart0
Tom Rini
- [U-Boot] [U-Boot, 1/3] cm-t35: move cm-t35 to live in compulab directory
Tom Rini
- [U-Boot] u-boot UBI support
Paul B. Henson
- [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 1/6] imx: iomux-v3: Add iomux-mx35.h
Benoît Thébaudeau
- [U-Boot] [PATCH 2/6] imx: flea3: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 3/6] imx: mx35pdk: Fix WDOG_RST iomux function
Benoît Thébaudeau
- [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 5/6] imx: woodburn: Convert to iomux-v3
Benoît Thébaudeau
- [U-Boot] [PATCH 6/6] imx: mx35: Remove legacy iomux support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support
Scott Wood
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Paul B. Henson
- [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
Marek Vasut
- [U-Boot] [PATCH] git-mailrc: Add trini shortcut
Tom Rini
- [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support
Marek Vasut
- [U-Boot] [PATCH] fdtdec: Add compatible string for High speed i2c
Naveen Krishna Chatradhi
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Marek Vasut
- [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support
Kuo-Jung Su
- [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support
Kuo-Jung Su
- [U-Boot] what is sandbox?
Simon Glass
- [U-Boot] [PULL] : Please pull u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support
Heiko Schocher
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] Pull request - zynq
Michal Simek
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Vivek Gautam
- [U-Boot] [PATCH v5 0/7] Add gdsys ControlCenter Digital board
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 1/7] Update gdsys email account
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 2/7] tpm: add AUTH1 cmds for LoadKey2 and GetPubKey
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 4/7] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 5/7] Add Atmel I2C tpm
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 6/7] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH v5 7/7] mpc85xx: Add gdsys ControlCenter Digital board
dirk.eibach at gdsys.cc
- [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3
Stefano Babic
- [U-Boot] Pull request - zynq
Tom Rini
- [U-Boot] [PATCH] PHY: micrel.c: supplement support for KSZ9031
SARTRE Leo
- [U-Boot] [PATCH] net: phy: supplement support for Micrel's KSZ9031
SARTRE Leo
- [U-Boot] Pull request - microblaze
Tom Rini
- [U-Boot] [PULL] : Please pull u-boot-i2c
Tom Rini
- [U-Boot] [PATCH v4 0/7] Add cros-ec protocol driver and enable it in smdk5250
Tom Rini
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Tom Warren
- [U-Boot] [PATCH 4/4 v2] mtd: mxs_nand: Add support for i.MX6
Scott Wood
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Marek Vasut
- [U-Boot] [U-Boot,v3,7/8] usb: hub: Reset only usb 2.0 ports
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
Tom Rini
- [U-Boot] [PATCH v2] fs/ext4: Support device block sizes != 512 bytes.
Tom Rini
- [U-Boot] [PATCH 1/2] mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND
Tom Rini
- [U-Boot] [PATCH 2/2] omap5_uevm: Enable redudnant MMC environment
Tom Rini
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Doug Anderson
- [U-Boot] [PATCH 2/2] omap5_uevm: Enable redudnant MMC environment
Nishanth Menon
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Tom Rini
- [U-Boot] [PATCH v4 03/15] sandbox: Switch over to generic board
Tom Rini
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Doug Anderson
- [U-Boot] u-boot UBI support
Paul B. Henson
- [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
Tom Rini
- [U-Boot] [PATCH] Fix references to the documentation files
Anatolij Gustschin
Last message date:
Tue Apr 30 23:15:33 CEST 2013
Archived on: Sun Sep 29 18:58:02 CEST 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).