[U-Boot] [PATCH 3/3] wandboard: Add boot selection support
Otavio Salvador
otavio at ossystems.com.br
Mon Apr 15 15:35:48 CEST 2013
Adds support for 'bmode' command which let user to choose where to
boot from; this allows U-Boot to load system from another storage
without messing with jumpers.
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---
board/wandboard/wandboard.c | 19 +++++++++++++++++++
include/configs/wandboard.h | 3 +++
2 files changed, 22 insertions(+)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 5d98244..e7cf4a1 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -16,6 +16,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <common.h>
@@ -225,6 +226,24 @@ int board_early_init_f(void)
return 0;
}
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+
+ return 0;
+}
+
int board_init(void)
{
/* address of boot parameters */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 161b400..4cb9f8d 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -32,6 +32,7 @@
#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
@@ -47,6 +48,8 @@
#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_BMODE
+
#define CONFIG_BOOTDELAY 5
#define CONFIG_SYS_MEMTEST_START 0x10000000
--
1.8.1
More information about the U-Boot
mailing list