[U-Boot] [PATCH 3/4] dma: Add i.MX6 support to drivers/dma/apbh_dma.c

[Stefan Roese]

This will be used by the i.MX6 NAND support.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/include/asm/arch-mx6/imx-regs.h    |  4 ++++
 arch/arm/include/asm/imx-common/dma.h       | 12 ++++++++++++
 arch/arm/include/asm/imx-common/regs-apbh.h | 17 ++++++++++++++++-
 drivers/dma/apbh_dma.c                      |  2 +-
 4 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index eaa7439..6837678 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -38,6 +38,10 @@
 #define DTCP_ARB_BASE_ADDR              0x00138000
 #define DTCP_ARB_END_ADDR               0x0013BFFF
 
+#define MXS_APBH_BASE			APBH_DMA_ARB_BASE_ADDR
+#define MXS_GPMI_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
 /* GPV - PL301 configuration ports */
 #define GPV2_BASE_ADDR			0x00200000
 #define GPV3_BASE_ADDR			0x00300000
diff --git a/arch/arm/include/asm/imx-common/dma.h b/arch/arm/include/asm/imx-common/dma.h
index 1ac8696..cb74528 100644
--- a/arch/arm/include/asm/imx-common/dma.h
+++ b/arch/arm/include/asm/imx-common/dma.h
@@ -72,6 +72,18 @@ enum {
 	MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
 	MXS_MAX_DMA_CHANNELS,
 };
+#elif defined(CONFIG_MX6)
+enum {
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+	MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+	MXS_MAX_DMA_CHANNELS,
+};
 #endif
 
 /*
diff --git a/arch/arm/include/asm/imx-common/regs-apbh.h b/arch/arm/include/asm/imx-common/regs-apbh.h
index a5de927..bcec6e0 100644
--- a/arch/arm/include/asm/imx-common/regs-apbh.h
+++ b/arch/arm/include/asm/imx-common/regs-apbh.h
@@ -109,7 +109,7 @@ struct mxs_apbh_regs {
 	mxs_reg_32(hw_apbh_version)
 };
 
-#elif defined(CONFIG_MX28)
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
 struct mxs_apbh_regs {
 	mxs_reg_32(hw_apbh_ctrl0)
 	mxs_reg_32(hw_apbh_ctrl1)
@@ -288,6 +288,17 @@ struct mxs_apbh_regs {
 #define	APBH_CTRL0_CLKGATE_CHANNEL_NAND7		0x0800
 #define	APBH_CTRL0_CLKGATE_CHANNEL_HSADC		0x1000
 #define	APBH_CTRL0_CLKGATE_CHANNEL_LCDIF		0x2000
+#elif defined(CONFIG_MX6)
+#define	APBH_CTRL0_CLKGATE_CHANNEL_OFFSET		0
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND0		0x0001
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND1		0x0002
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND2		0x0004
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND3		0x0008
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND4		0x0010
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND5		0x0020
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND6		0x0040
+#define	APBH_CTRL0_CLKGATE_CHANNEL_NAND7		0x0080
+#define	APBH_CTRL0_CLKGATE_CHANNEL_SSP			0x0100
 #endif
 
 #define	APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN			(1 << 31)
@@ -393,6 +404,10 @@ struct mxs_apbh_regs {
 #define	APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF		0x2000
 #endif
 
+#if defined(CONFIG_MX6)
+#define	APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET		16
+#endif
+
 #if defined(CONFIG_MX23)
 #define	APBH_DEVSEL_CH7_MASK				(0xf << 28)
 #define	APBH_DEVSEL_CH7_OFFSET				28
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index eb46bcf..510cb28 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -227,7 +227,7 @@ static int mxs_dma_reset(int channel)
 #if defined(CONFIG_MX23)
 	uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
 	uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;
-#elif defined(CONFIG_MX28)
+#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6))
 	uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set);
 	uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET;
 #endif
-- 
1.8.2.1