[U-Boot] [PATCH v2] Add NanoBone board support
Tom Rini
trini at ti.com
Thu Apr 25 22:30:58 CEST 2013
On Mon, Apr 22, 2013 at 01:46:55PM +0100, Mark Jackson wrote:
> NanoBone Specification:
> -----------------------
> CPU:
> TI AM335x
>
> Memory:
> 256MB DDR3
> 64MB NOR flash
> 256MB NAND flash
> 128KB FRAM
>
> Ethernet:
> 2 x 10/100 connected to SMSC LAN8710 PHY
>
> USB:
> 1 x USB2.0 Type A
>
> I2C:
> 2Kbit EEPROM (Microchip 24AA02)
> RTC (Maxim DS1338)
> GPIO Expander (Microchip MCP23017)
>
> Expansion connector:
> 6 x UART
> 1 x MMC/SD
> 1 x USB2.0
>
> Signed-off-by: Mark Jackson <mpfj at newflow.co.uk>
> ---
> Changes in v2:
> - Tweaked after comments from Tom Rini
This appears to be whitespace corrupted, please re-send.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130425/eb458635/attachment.pgp>
More information about the U-Boot
mailing list