[U-Boot] [PATCH 1/3] OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC

Sricharan R r.sricharan at ti.com
Mon Apr 8 12:44:58 CEST 2013


Hi Tom,

On Friday 05 April 2013 09:51 PM, Tom Rini wrote:
> In the case of booting from certain peripherals, such as UART, we must
> not see what the device descriptor says for RAW or FAT mode because in
> addition to being nonsensical, it leads to a hang.  This is why we have
> a test currently for the boot mode being within range.  The problem
> however is that on some platforms we get MMC2_2 as the boot mode and not
> the defined value for MMC2, and in others we get the value for MMC2_2.
> This is required to fix eMMC booting on omap5_uevm.
>
 
> Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on
> classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC).
> 
> Signed-off-by: Tom Rini <trini at ti.com>
> ---
>  arch/arm/cpu/armv7/omap-common/lowlevel_init.S |   10 +++++++---
>  arch/arm/include/asm/arch-am33xx/spl.h         |    3 +++
>  arch/arm/include/asm/arch-omap3/spl.h          |    3 +++
>  arch/arm/include/asm/arch-omap4/spl.h          |    2 ++
>  arch/arm/include/asm/arch-omap5/spl.h          |    2 ++
>  5 files changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> index b933fe8..90b3c8a 100644
> --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
> @@ -60,10 +60,14 @@ ENTRY(save_boot_params)
>  	ldr	r3, =boot_params
>  	strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ spl_boot_device <- r1
>  
> -	/* boot mode is passed only for devices that can raw/fat mode */
> -	cmp	r2, #BOOT_DEVICE_XIP
> +	/*
> +	 * boot mode is only valid for device that can be raw or FAT booted.
> +	 * in other cases it may be fatal to look.  While platforms differ
> +	 * in the values used for each MMC slot, they are contiguous.
> +	 */
> +	cmp	r2, #MMC_BOOT_DEVICES_START
>  	blt	2f
> -	cmp	r2, #BOOT_DEVICE_MMC2
> +	cmp	r2, #MMC_BOOT_DEVICES_END
>  	bgt	2f
>  	/* Store the boot mode (raw/FAT) in omap_bootmode */
>  	ldr	r2, [r0, #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr
> diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
> index f60b086..14a2c7c 100644
> --- a/arch/arm/include/asm/arch-am33xx/spl.h
> +++ b/arch/arm/include/asm/arch-am33xx/spl.h
> @@ -37,4 +37,7 @@
>  #define BOOT_DEVICE_USBETH	68
>  #define BOOT_DEVICE_CPGMAC	70
>  #define BOOT_DEVICE_MMC2_2      0xFF
> +
> +#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
> +#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
>  #endif
> diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h
> index dec4dac..84e6d7b 100644
> --- a/arch/arm/include/asm/arch-omap3/spl.h
> +++ b/arch/arm/include/asm/arch-omap3/spl.h
> @@ -31,4 +31,7 @@
>  #define BOOT_DEVICE_MMC1	6
>  #define BOOT_DEVICE_XIPWAIT	7
>  #define BOOT_DEVICE_MMC2_2      0xFF
> +
> +#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
> +#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
>  #endif
> diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h
> index 4e094f9..f61627f 100644
> --- a/arch/arm/include/asm/arch-omap4/spl.h
> +++ b/arch/arm/include/asm/arch-omap4/spl.h
> @@ -32,4 +32,6 @@
>  #define BOOT_DEVICE_MMC2	6
>  #define BOOT_DEVICE_MMC2_2	0xFF
>  
> +#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
> +#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
>  #endif
> diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
> index 323cd63..d4d353c 100644
> --- a/arch/arm/include/asm/arch-omap5/spl.h
> +++ b/arch/arm/include/asm/arch-omap5/spl.h
> @@ -32,4 +32,6 @@
>  #define BOOT_DEVICE_MMC2        6
>  #define BOOT_DEVICE_MMC2_2	7
>  
> +#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
> +#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
>  #endif
 Acked-by: R Sricharan <r.sricharan at ti.com>


More information about the U-Boot mailing list