[U-Boot] [PATCH 2/5][v2] powerpc/mpc85xx: new SPL support for IFC NAND

Scott Wood scottwood at freescale.com
Tue Apr 9 02:55:05 CEST 2013


On 04/05/2013 09:38:32 PM, Prabhakar Kushwaha wrote:
> On 04/06/2013 02:10 AM, Scott Wood wrote:
>> On 03/22/2013 02:08:05 AM, Prabhakar Kushwaha wrote:
>>> diff --git a/board/freescale/common/Makefile  
>>> b/board/freescale/common/Makefile
>>> index 75725b4..a4d521c 100644
>>> --- a/board/freescale/common/Makefile
>>> +++ b/board/freescale/common/Makefile
>>> @@ -29,6 +29,15 @@ endif
>>> 
>>>  LIB    = $(obj)libfreescale.o
>>> 
>>> +MINIMAL=
>>> +
>>> +ifdef CONFIG_SPL_BUILD
>>> +ifdef CONFIG_SPL_INIT_MINIMAL
>>> +MINIMAL=y
>>> +endif
>>> +endif
>>> +
>>> +ifndef MINIMAL
>>>  COBJS-$(CONFIG_FSL_CADMUS)    += cadmus.o
>>>  COBJS-$(CONFIG_FSL_VIA)        += cds_via.o
>>>  COBJS-$(CONFIG_FMAN_ENET)    += fman.o
>>> @@ -62,6 +71,7 @@ SUBLIB-$(CONFIG_P3041DS)    +=  
>>> p_corenet/libp_corenet.o
>>>  SUBLIB-$(CONFIG_P4080DS)    += p_corenet/libp_corenet.o
>>>  SUBLIB-$(CONFIG_P5020DS)    += p_corenet/libp_corenet.o
>>>  SUBLIB-$(CONFIG_P5040DS)    += p_corenet/libp_corenet.o
>>> +endif
>>> 
>>>  SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
>>>  OBJS    := $(addprefix $(obj),$(COBJS-y))
>> 
>> If this is needed to avoid pulling in any files from this directory,  
>> why did p1_p2_rdb_pc not need this?  Is there a particular file that  
>> is failing to build or failing to get optimized away
> 
> I cannot avoid this directory :(.
> because new SPL compile this directory even after undef QIXIS defines
> 
> #ifndef CONFIG_SPL_BUILD
> #define CONFIG_FSL_QIXIS
> #endif

Yeah, the makefiles never see CONFIG_SPL_BUILD -- it only works for C  
code.

The P1022 SPL patch just does this in the makefile:

+ifndef CONFIG_SPL_BUILD
  COBJS-$(CONFIG_FSL_NGPIXIS)	+= ngpixis.o
+endif

...which is less intrusive.  We can revisit it if we end up actually  
needing pixis/qixis inside an SPL.

-Scott


More information about the U-Boot mailing list