[U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout

[Vivek Gautam]

Hi Marek,


On Tue, Apr 2, 2013 at 10:42 AM, Marek Vasut <marex at denx.de> wrote:
> Dear Vivek Gautam,
>
>> Hi,
>>
>> On Tue, Apr 2, 2013 at 1:43 AM, Tom Rini <trini at ti.com> wrote:
>> > On Wed, Mar 27, 2013 at 02:59:00PM +0530, Vivek Gautam wrote:
>> >> Patch b6d7852c increases timeout for enumeration, taking
>> >> worst case to be 10 sec.
>> >> get_timer() api returns timestamp in micro-seconds, which is
>> >> what we are checking in the do-while() loop in usb_hub_configure()
>> >> (get_timer(start) < CONFIG_SYS_HZ * 10).
>> >> This should give us a required check for 10 seconds, and thereby
>> >> we don't need to add additional mdelay of 100 microseconds in
>> >> each cycle.
>> >
>> > The wording here is not correct.  get_timer operates in milliseconds not
>> > microseconds.
>>
>> Oops!! Yes of course, my mistake. Thanks
>
> I have the patches queued in usb/next, you can send me a fix and I'll squash it
> with what's already in there.

Sure,  i shall send a fix for this.
Should it be good actually to respin the complete patch-series with
the changes you have suggested ??
The patches i could see in the 'next' are the originally posted ones.

>
> Best regards,
> Marek Vasut



-- 
Thanks & Regards
Vivek