[U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout

[Vivek Gautam]

On Tue, Apr 2, 2013 at 11:04 AM, Vivek Gautam <gautamvivek1987 at gmail.com> wrote:
> Hi Marek,
>
>
> On Tue, Apr 2, 2013 at 10:42 AM, Marek Vasut <marex at denx.de> wrote:
>> Dear Vivek Gautam,
>>
>>> Hi,
>>>
>>> On Tue, Apr 2, 2013 at 1:43 AM, Tom Rini <trini at ti.com> wrote:
>>> > On Wed, Mar 27, 2013 at 02:59:00PM +0530, Vivek Gautam wrote:
>>> >> Patch b6d7852c increases timeout for enumeration, taking
>>> >> worst case to be 10 sec.
>>> >> get_timer() api returns timestamp in micro-seconds, which is
>>> >> what we are checking in the do-while() loop in usb_hub_configure()
>>> >> (get_timer(start) < CONFIG_SYS_HZ * 10).
>>> >> This should give us a required check for 10 seconds, and thereby
>>> >> we don't need to add additional mdelay of 100 microseconds in
>>> >> each cycle.
>>> >
>>> > The wording here is not correct.  get_timer operates in milliseconds not
>>> > microseconds.
>>>
>>> Oops!! Yes of course, my mistake. Thanks
>>
>> I have the patches queued in usb/next, you can send me a fix and I'll squash it
>> with what's already in there.
>
> Sure,  i shall send a fix for this.
> Should it be good actually to respin the complete patch-series with
> the changes you have suggested ??

I was out on weekend, so couldn't update the patch-series.

> The patches i could see in the 'next' are the originally posted ones.
>
>>
>> Best regards,
>> Marek Vasut
>
>
>
> --
> Thanks & Regards
> Vivek



-- 
Thanks & Regards
Vivek