[U-Boot] [PATCH] mx23: Put back RAM voltage level to its original value

[Otavio Salvador]

On Sat, Apr 27, 2013 at 2:28 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Stefano,
>
> On Sat, Apr 27, 2013 at 8:09 AM, Stefano Babic <sbabic at denx.de> wrote:
>
>> I agree that we have not yet found a clear cause of the behavior - but
>> ler me say that is quite bound to the hardware and how voltage is
>> applied to the DDR. As the patch reports to allow to boot kernel in most
>> cases, I agree with Fabio to apply this - and IMHO most investigation
>> should be done by the hardware developers.
>
> 100% agreed. The patch I proposed can be seen as a workaround, not a real fix.
>
> Applying it will give the benefit of allowing mx23 to boot a kernel
> again, and then we can focus on the real fix, which requires a more
> careful and detailed investigation.

100% agreed as well.

--
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br